New AP Extreme with new Air shows PHY mode ?as n -- not ac

Option-clicking the menu bar Wifi icon shows that my new Airport Extreme (with my 2012 Air) is showing 802.11 n. I thought it would show 802.11 ac. What gives

scomac wrote:
I have the 2013 (Haswell) Air and the new, tall Airport Extreme. Option=clicking the WiFi icon in the menu bar shows that the PHY Mode is 802.11n with a transmit rate not higher than 150, and often lower.
For some reason, I was able to see the PHY Mode as AC last night, and it showed a transmit rate of 867, expected for AC.
However, now all that I see in PHY Mode is 802.11n
I'd like to see the speed I paid for . . . .
A speed of 150 means it has joined the 2.4ghz wireless..
The AC signal is only transmitted on 5ghz..
Give the 5ghz wireless a different name to 2.4ghz.. so you can select it in the Air. But it might still not show the full speed or might well not work.. the apple equipment is designed to swap bands automagically according to signal which depends on the location. Sometimes though it is over complicated.. and easier to just pick it yourself.
AC signal probably still will not have the range that 2.4ghz does.. although that depends on if Apple amplified 2.4ghz as well as 5ghz.

Similar Messages

  • Updated to iOS 5 and now photos sent with text message show as sent, but are not received to an iPhone that has not been updated.

    Updated  to iOS 5 and tried sending a message with a phot to an iPhone that has not been updated. My message shows as sent, but neither the text or photo are received. Text alone works fine.

    This is being caused by using the same Apple ID for iMessage.  To fix this you have two choices:
    On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
    On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

  • Issues: new events show from google calendar but not the other way round

    Hi,
    I've just followed the instructions to the letter on these pages: http://support.google.com/mobile/bin/answer.py?hl=en&topic=14252&answer=138740
    & http://support.google.com/mobile/bin/answer.py?hl=en&answer=139206 and looked at the known issues page, but I am still stuck.
    Entries in my Google Calendar have now synced in iOS Calendar (and weekcal which I use instead of iOS Cal) - however, none of my existing entries in my iOS Cal have synced with Google Cal.
    Here are the issues:
    A recurring event created by someone else and me invited showed in iOS when I set this up
    None of my events from iOS show in Google Calendar
    New events I create in Google Calendar do not show in iOS
    New events I create in iOS don't show in Google Calendar
    To test, I deleted the recurring event which was the only one showing on iOS - immediately it was also deleted on iOS which indicates it is set-up to sync betweeb Google and iOS
    Cannot find any information on help pages about this.

    I'm not sure what else to suggest. As the Nokia 5800 is not natively supported by iSync you must be using an iSync Plugin, so I'd advise contacting the author of the plugin - it may be buggy and need fixing.

  • New mail shows up on iphone but NOT mail.app

    Not sure if this belongs here, sorry if its the wrong place.
    I have a mobile me email, and iphone, and an imac. when new mail comes in it shows up fine on iphone and when i FIRST launce mail.app. However, if a second email comes in, mail.app will not 'see it'. iphone will.
    how is this possible? and how do i fix it?
    thanks

    On my set up, with the mobile me sync panel set to automatic and mail accounts ticked, I recieve incoming mail instantly. (on phone and mac)
    Mail Accounts under the Sync tab for your MobileMe account settings is for syncing email account settings with the Mail.app between multiple Macs only. This has nothing to do with Fetching messages or new messages being pushed to the Mail.app or to the iPhone.
    The iPhone includes a Push setting, which can be turned on or off. Are you saying if you turn Push access off on your iPhone and leave Mail Accounts selected under the Sync tab for your MobileMe account settings on your Mac, new messages will be pushed to your iPhone with your MobileMe account even though Push access is turned off on your iPhone?
    +There is no setting at System Preferences > MobileMe under the Sync tab that has anything to do with the Mail.app.+
    +The Fetch setting for the Mail.app is at Mail > Preferences under the General tab.+
    +The Mail.app setting that allows for Push access with an IMAP account is available under the Advanced tab for the account preferences - use IDLE command if the server supports it.+
    The iPhone includes a Fetch setting, which is used if Push access is turned off. The iPhone includes a global push setting - on or off, and you can enable or disable push access separately for received messages, contacts and calendars with a MobileMe account. I don't have push access enabled for received messages with my MobileMe account on my iPhone, but I do have push access enabled for contacts and calendar events.
    The MobileMe sync settings under the Sync tab for your MobileMe account preferences has nothing to do with the Mail.app and checking for new messages or syncing server stored mailboxes with the Mail.app or with the iPhone's Mail client.

  • New banner show up in preview but not on my site!

    I made a banner using PS, i sliced it,(png-24)  imported the code into my site in DW. When i preview, everything looks fine. When i upload via DW syncronise with my web site, nothing shows up, though the files show up in myonline file directory.
    Here is a link with a simmilar problem.
    http://forums.adobe.com/message/2539872#2539872
    Here is my website:
    http://committed.netai.net/
    I didn't post any code as it was mentioned in the link above that i don't have to and it is easier to view the code through my website. How is this done and how can i do this?

    @John Waller
    Thank you for your reply and help.
    The part of the site that i am working with is the banner, the png's that point to my HDD.
    I  don't see anywhere in the DW code where it is pointing to my HDD. Also  it is uploaded to the site. I use  http://www.selfseo.com/html_source_view.php to view the code, but i  still don't see it pointed to the HDD.What do you use to view the code?
    If i insert/image then it will no longer be a linkable banner as it will do away with the slices, correct?
    I saved the banner as html and image.
    I placed the folders into my DW folder.
    I opened it in a new html and copy/pasted the code into my opened DW site.
    I syncronized the DW with my site. (the site shows the png's.
    Here is the DW code:
    What am i missing. I don't just wan't to fix the problem, but to understand it.
    <td colspan="5">
                 <img src="images/images/upper-blank.png" width="980" height="136" alt=""></td>
         </tr>
         <tr>
             <td colspan="2">
                 <img src="images/lowerbanner_02.png" width="236" height="1" alt=""></td>
             <td width="233" rowspan="2">
                 <img src="images/images/workstation.png" width="233" height="264" alt=""></td>
             <td width="233" rowspan="2">
                 <img src="images/images/3dvision.png" width="233" height="264" alt=""></td>
             <td width="305" rowspan="2">
                 <img src="images/images/forums.png" width="278" height="264" alt=""></td>
         </tr>
         <tr>
             <td width="235">
                 <img src="images/images/desktop.png" width="235" height="263" alt=""></td>
             <td width="1">
                 <img src="images/lowerbanner_07.png" width="1" height="263" alt=""></td>
    [IMG]http://i195.photobucket.com/albums/z100/micro5797/Kommitted/sitefolders.jpg[/IMG]

  • Mavericks Gmail account - new mail showing up in Archive but not in Inbox

    For a Gmail account, new mail seems to be showing up in the "Archive" folder for that account (which seems to be mapped to Gmail's "All Mail").
    However it isn't showing up in the Inbox for the account.
    The settings seem identical to another Gmail account where mail is showing up in the Inbox.
    Any thoughts of what I might do to get these mails to show up in the Inbox?
    Thanks,
    Doug

    I don't know. I've given up for now and am using Mailplane. I will be doing a write-up on it, but it seems to be working much better than Airmail even.
    The funny thing about using Mailplane, which is a lot more directly connected to Gmail than any of the other clients, is that for the first time I'm seeing that even the iOS Mail app, which I thought had no problems, is actually lagging quite a lot behind the actual Gmail contents!
    I think Mail.app is hopeless at this point. Maybe it's good if you want to transfer an an entire IMAP set of folders between accounts if you are migrating (as is Thunderbird). But basically it's become extremely unreliable under Mavericks. I can't believe Apple let it out of the door.
    doug

  • New Nano shows in source but file not found

    This is really frustrating. My new nano starts to sync in I-tunes. IT will start to download my library then about a third of the way into it an error comes up that says "Nano can not be updated the required file can not be found". I've updated i-tunes, restored the Nano, even though it's new. It shows up on the I-tunes source list and in device manager. Then after I get the error of "file not found" I-tunes says update complete. When I disconnect the ipod, it's frozen on do not disconnect and I have to reset it.
    Any ideas?

    Hi,
    Did you updated Latest CR_content  and Cimsap?
    If not download from SAP marketplace and update in SLD.
    Regards,
    Manivannan P

  • Using TImed Access mode on Airport Extreme with other routers in bridge mode. Not working as expected.

    I am trying to setup timed access mode on my airport extreme in order to limit the times devices can connect to my network, but I am having some trouble.
    My setup is as follows  Cable Modem ---> Airport Extreme ---> Netgear router
    The Airport is running DHCP and the Netgear is in bridge mode. The only purpose of the Netgear is to provide a wireless access point for older b/g wifi devices. The Netgear is connected to the Airport by an ethernet cable from one of its LAN ports. All ip addresses are supplied by the Airport.
    When I list a device mac number in the Airport extreme's timed access table it does seem to block the device if the device trys to connect to the airport's wireless service, but the device is still able to obtain service through the Netgear wireless service. I want the device to be blocked on both wireless networks. I thought this would work since all DHCP is on the airport. Why is the Airport allowing the device to connect when it comes in through the Netgear?
    In this example the device I am trying to block is 5c:59:48:ba:28:d2.
    Looking at the log on the airport I see the following entry when the device (when permitted) connects to the airport wireless
    Nov 30 22:43:12
    Severity:5
    Associated with station 5c:59:48:ba:28:d2
    If instead the device connects to the Netgear wireless I see the following log entry on the airport (this connection gets through even if the mac address above is listed as blocked on the airport)
    Dec 01 10:46:29
    Severity:5
    Connection accepted from [fe80::223:12ff:fe29:acfe%bridge0]:54774.
    It appears that the Netgear router (while bridging the network) is somehow modifying the mac address format in a way that the airport does not recognise it as the device to block.
    What can I do to fix this?
    Thanks.

    The Netgear wireless server has control over what what devices are allowed to connect.
    Unless you tell the Netgear what devices you want to allow to connect, it will allow any wireless device to connect as long as it knows the wireless network password.
    IF.... .you were using two AirPort Extremes, and not a Netgear, the two Extremes would communicate to each other....so you would only have to enter Timed Access settings on one router and other AirPort would automatically pick those settings up.
    But, even this was not the case until the last year or so when Apple updated firmware.  A few years ago, you might have had 2 Apple AirPort Extremes on the network, but you still had to manually set up Timed Access on both devices separately.
    Bottom line, you need to setup the equivalent of Timed Access on the Netgear router.

  • Movies with iTunes Extras show only HTML code and not title screen when double clicked.

    I only noticed this after some iTunes updates.  Any movies that have iTunes Extras donot show the "Title Screen" when double clicked.  They only show HTML script.  I can still watch the movies, and can access the extras by going to the folder they are in, but thats a pain.  I have purchased other movies with extras since encountering the problem and have the same issue.  I run windows Vista on a 32-bit system. I have all updated drivers.  I have searched the web for an answer but couldnt find anything.  It is prob something insanely easy.  Any help would be appriciated.
    Example of text that appears when double clicking:
    <!doctype html>
    <html>
    <head>
         <meta http-equiv="Content-type" content="text/html; charset=utf-8" />
         <meta name="hdtv-fullscreen" content="true" />     
         <meta name="hdtv-cursor-off" content="true" />          
         <title>Paul (Unrated) [2011]</title>          
         <!--      TuneKit      -->   
      <script type="text/javascript" src="TuneKit/src/TuneKit.js" charset="utf-8"></script>          
         <!--      Styles      -->     
         <link rel="stylesheet" href="css/shared.css" type="text/css" media="screen" />     
         <link rel="stylesheet" href="css/home.css" type="text/css" media="screen" />     
         <link rel="stylesheet" href="css/chapters.css" type="text/css" media="screen" />     
         <link rel="stylesheet" href="css/features.css" type="text/css" media="screen" />     
         <link rel="stylesheet" href="css/more.css" type="text/css" media="screen" />          
         <!--      Controllers      -->     
         <script type="text/javascript" src="controllers/data.js" charset="utf-8"></script>     
         <script type="text/javascript" src="controllers/home.js" charset="utf-8"></script>     
         <script type="text/javascript" src="controllers/chapters.js" charset="utf-8"></script>     
         <script type="text/javascript" src="controllers/features.js" charset="utf-8"></script>     
         <script type="text/javascript" src="controllers/more.js" charset="utf-8"></script>
    </head>
    <body>
         <div id="bleed">          
              <div id="navigation">             
                   <img id="pic0" class="picBLANK" src="images/home/Paul_mm_background_01.jpg"/>            
              <img id="pic1" class="picBLANK" src="images/home/Paul_mm_background_01.jpg"/>             
                   <img id="pic2" class="picBLANK" src="images/home/Paul_mm_background_02.jpg"/>            
              <img id="pic3" class="picBLANK" src="images/home/Paul_mm_background_03.jpg" />            
              <img id="pic4" class="picBLANK" src="images/home/Paul_mm_background_04.jpg" />            
              <img id="pic5" class="picBLANK" src="images/home/Paul_mm_background_05.jpg" />            
              <img id="pic6" class="picBLANK" src="images/home/Paul_mm_background_06.jpg" />            
              <img id="pic7" class="picBLANK" src="images/home/Paul_mm_background_07.jpg" />            
              <img id="pic8" class="picBLANK" src="images/home/Paul_mm_background_08.jpg" />            
              <img id="pic9" class="picBLANK" src="images/home/Paul_mm_background_09.jpg" />            
              <img id="pic10" class="picBLANK" src="images/home/Paul_mm_background_01.jpg" />             
                   <div id="vid" class="vid_bg">               
                        </div>          
              </div>     
         </div>
    </body>
    </html>

    The fix from this other post worked for me.
    https://discussions.apple.com/message/17691332#17691332
    FIX:
    Go into "Get Info" and set the Album name to the name of the movie for both the movie and the "Extra".  This will fix it.

  • Trying to set up airport extreme with a dsl modem and get DSN server not found message .   Get a green light on airport but no internet modem and get

    Am attempting to set up a Wi Fi network with an airport extreme.    Get most of the way through the setup  (have a dsl modem) but get an error that it cannot connect to the internet.   Says I have a problem with a DSN server and asks for  what appears to be a series of numbers.    I had an old airport express working for some time and never saw this.  
    Decided to upgrade since the express was not powerful enough to work in the whole house.

    It is always a good idea when changing out networking hardware to perform a complete power recycle of all of your networking gear.
    Please try the following:
    Power-down the modem, AirPort Extreme Base Station (AEBS), and computer(s). Leave them powered-off for at least 10-15 minutes.
    Power-up the modem; wait at least 10-15 minutes to make sure that is has enough time to initialize.
    Power-up (plug into power) the AEBS; wait at least 5-10 minutes or until its status light is a solid green. (Note: The status light may continue to flash amber after this timeframe. This is ok as it may just be letting you know that some additional configuration items need to be taken care of like setting up wireless security.)
    Power-up the computer(s).
    Computers connected to the AEBS by either wire or wireless should now be able to access the Internet. Please post back your results.

  • New Air 1 minute startup

    Hi,
    I bought the new 13" Macbook Air 2 weeks ago and the total boot time is about 1 minute. It holds on a white screen for about  45 seconds after the Apple logo and cog appears but before the desktop appears. Various YouTube videos of the new Air show it booting in 16-19 seconds so I do not think this is normal. All I have installed is Firefox and DavMail. I verified the disk and repeaired permissions and called Apple support who had me do the same but the problem persists.
    Has anybody else experienceed this? Any ideas what the problem could be?
    Thanks,
    Jay

    Jay,
    The most common cause will be what is listed in your Login Items. Navigate to System Preferences - Users and Groups - Login Items. If you see apps in there you don't want to launch on login then highlight them and click the - symbol below.
    If that doesn't do it then I'd recommend restarting in Safe Mode, this will clear some caches. It's possible one or more has become corrupt.

  • New Air is not connecting online

    I have just purchased a new MacBook Air and had it synced to my Pro, which is using the latest software version. It seems that in doing the sync something in the Pro has triggered a glitch in the Air so that even though the Air shows connection online it does not connect online. How can that be fixed? Thanks.

    Download the update on another computer, if you have one, and transfer it to the MBA. Otherwise see below.
    The warranty entitles you to complimentary phone support for the first 90 days of ownership. If you bought the product in the U.S. directly from Apple (not from a reseller), you also have 14 days from the date of delivery in which to  exchange or return it for a refund. In other countries, the return policy may be different.

  • Can I trade my ipad 2 for new air ipad?

    Can I trade my ipad 2 for new air ipad?

    No. Apple does not take trade ins.
    You can sell your iPad and use the money to buy a new one.
    Alternatively you can use one of Apple's recycling partners to get an Apple Store Gift card for a fraction of the iPad's worth and use that in any Apple store to buy a new iPad.
    https://www.apple.com/recycling/gift-card/
    You can get an estimate for your iPad here:
    http://store.apple.com/us/browse/reuse_and_recycle

  • Still big problem with "Adobe AIR 16" and "Adobe AIR 17"

    Device:Iphone 6 e Iphone 6 plus
    My application xml:
        <fullScreen>true</fullScreen>
        <aspectRatio>landscape</aspectRatio>
        <renderMode>cpu</renderMode>
        <autoOrients>false</autoOrients></initialWindow
    When I use "cameraRoll.browseForImage ();" and the user clicks on the "Cancel" the keyboard becomes vertical and status bar trasparent. Unable to use the app.
    Adobe is not the same as a few years ago, instead of solving the problems they create.
    With "Adobe AIR 15" works but I can not publish the app on Apple Store (OS64 bit).
    HelpMeeeeeeeee

    Device:Iphone 6 e Iphone 6 plus
    My application xml:
        <fullScreen>true</fullScreen>
        <aspectRatio>landscape</aspectRatio>
        <renderMode>cpu</renderMode>
        <autoOrients>false</autoOrients></initialWindow
    When I use "cameraRoll.browseForImage ();" and the user clicks on the "Cancel" the keyboard becomes vertical and status bar trasparent. Unable to use the app.
    Adobe is not the same as a few years ago, instead of solving the problems they create.
    With "Adobe AIR 15" works but I can not publish the app on Apple Store (OS64 bit).
    HelpMeeeeeeeee

  • Fix for "iPod shows up in Windows but not in iTunes"

    This is a possible fix for those with the "iPod shows up in Windows but not in iTunes" problem. This also fixes those have the update/restore problem (ipod disconnects after clicking update/restore in itunes)
    SOLUTION
    SOLUTION
    I had the exact same problems before, iTunes doesn’t recognize iPod after connecting it, I had to use the restart iPod Service method to get it working.
    I tried this on my second computer and it worked perfectly, iTunes recognizes iPod every time I plug it in.
    I compared the process/services opened in both computers, and I turned on some services which were previously on disable(excluding iPod Service). Unfortunately I forgot which services it was, so I took some screenshots and compare these with your services.
    After modifying the services, I tried plug and unplug the iPod several times without closing iTunes, iPod was instantly recognized by iTunes every time!
    I attached the links to screenshots of my automatic services and manual services, ignore the service if its not on your list!
    For those don’t know how to open Services, Start -> Run -> “services.msc”
    http://img214.imageshack.us/img214/6200/automaticservicesec2.jpg
    http://img216.imageshack.us/img216/3700/manualservicesce3.jpg
    -If anyone know the specific services required to be turned on, please reply in this thread.
    -I am using the 2nd Gen Nano 2GB version with latest iTunes.
    IBM T43 Windows XP Pro
    IBM T43 Windows XP Pro

    Have you had a chance to look at this troubleshooting page? It may be of some help: iPod shows up in Windows but not in iTunes

Maybe you are looking for