New calculated item positioning

Hi guys!
Suppose I have a pivot table in whichI have only one column consisting of a multiple CASE function and then I build a New Calculated Item on this column.
Graphically it looks like this, more or less:
| CASE_CONDITION1 | CASE_CONDITION2 | CASE_CONDITION3 | CASE_CONDITION4 | NEW_CALCULATED_ITEM |
Row1 | x | y | w | z | x+y |
Row2 | ... | | | | |
Is there a way ( I even tried to modify the XML in the advanced session but with no success..) to display the pivot table as following?
| CASE_CONDITION1 | CASE_CONDITION2 | NEW_CALCULATED_ITEM | CASE_CONDITION3 | CASE_CONDITION4 |
Row1 | x | y | x+y | w | z |
Row2 | ... | | | | |
Thanks a lot!!

Graphically that looks bad!! Look at this please:
http://s15.postimage.org/4nco7ox17/Imm.jpg
Thanks!

Similar Messages

Conditional Formating in New Calculated Item??

Hi there,
In pivot table I've created a new calculated item in column that is % calculation of measure value A and B.
I need to apply conditional formatting on new calculated value only. I also want to add % sign on the calculated value.
Previously I modified the data format of measure values to percentage and manage to bring % sign in calculated item. Now I need to show both measure and calculated item in report with measure without % sign and calculated item with % sign
Thanks

No, I don’t think you can do that in New Calculated Item in Pivot Table.
What you can try is pulling another column in your report and try using this formula (case when stmt) in column fx and insert it in pivot table.

How to show New calculated item in graph.

I created a new calculated item in column in pivot table. That new calculated item is not showing in line graph.
How to show that new column in graph.
Thanks

Guys Please provide any pointers to achieve this. its very urgent for me.
Regards
Kris

Need help on new calculated item column

Hi Guys,
Could you please help me with the formula on a new calculated item on the attached report?
Details on the screen shot of the link
http://img339.imageshack.us/img339/5606/70548266.jpg
Thanks and Regards
G.

Nikkolas wrote:
i found dv5-1251nr with 512 megs dedicated nvidia graphics ( NVIDIA GeForce 9200M GS) Intel Core 2 Duo Processor T6400 4 gigs ram 320 hd for 849 now i tested this system with battery in
6 cell on balanced mode internet surfing, looping a 3 min video clip, 3 other windows open including chess and the 3d game fate and battery that was 100% dropped to 75% after 30 mins, so if i figured it out right means battery lasts for about 2 hours
this any good and whats deal with all the chips intel centrino, intel centrino 2 etc and i know amd athlon is old and turion is better but is it that much better?
Intel Core 2 Duo's are the most efficent, so if you are looking for good battery life, that is what you want. Avoid AMD as they eat the battery life quite quickly.
The battery life depends on what the computer is doing, so if you are stressing it with a lot of applications, yes the battery is going to die quicker than normal.
My opinions are mine, and mine alone.

How to change layout of new calculated item values?

Hi,
Is there a way on how to change colours or add a percentage symbol on the values of a calculated items?
I do not want to change the source measures in the criteria area I used to get the calculated items results.
Any idea?
Regards
Giuliano

I solved this by using an other approach.
Created a report and filtered the first resolts by certain value. Added a label.
Used combine with similar request and filtered again.
Created so many combines for the number of results I need to filters
In result columns renamed the label with a description which is a common denominator for all the labels
In pivot table, moved the main label to Rows and appled the sum
the reults is below
https://docs.google.com/file/d/0B0nRf4E3yBfpWS1WVjJjbWZyTG8/edit?usp=sharing
Regards
G

Wrong value with calculated item in pivot table

I have a report with 4 columns:
First Column are Department Dimension
Second Column is Actual value
Third Column is Previous value
Four Column is: ((Actual Value-Previous Value)/Previous Value))*100 that called Var
Then I do a pivot table and I have new calculated item: Department1/Department2 and I have wrong value in four column:
Department----------------------------------Actual-------Previous------Var
Dept1------------------------------------------18503--------16308--------13,5
Dept2-------------------------------------------3758---------3518----------6,8
(Calculated Item: Dept1/Dept2)--------4,92---------4,64------------*2* <---- This value is wrong...and it has to be: 6,03
Is possible to get the correct value???
Thank you very much!

hi,
Create a logical column with ur calculation formula and make it as default agg rule in rpd and answers change it to server determined/server complex agg.I did the same it was working fine for me!!
Check this link
http://books.google.com/books?id=OnbYrkWa4RsC&pg=PA74&lpg=PA74&dq=%22server+complex+aggregate%22&source=web&ots=qxrpaFXmo2&sig=CxLOemzcOlvIiaQ_sQD4fPQotdM&hl=en&sa=X&oi=book_result&resnum=5&ct=result#v=onepage&q=%22server%20complex%20aggregate%22&f=false
thanks,
saichand

Data format in pivot table calculated item

Hi All,
I've got a pivot table with a dimension on rows and a dimension on columns and a measure. I have a "new calculated item" based on the dimension on the columns which does the following: ( ($2-$1) / ($1) ) *100
I want this calculated item shown as a percentage like 1,2% but the measure must stay a whole number like 1234 (no decimal places or percentage symbols) any suggestions on how to achieve this?
Thanks in advance!
Gilles

Hi Kishore,
It is not helpful, I mean, it doesn't solve my problem. But nice post!
What I have is the following:
--------C1------C2-----C3
R1|--123--|--345--|--678--|
R2|--124--|--346--|--679--|
R3|--125--|--347--|--670--|
What I want is the following:
--------C1------C2-----C3---------calculated item
R1|--123--|--345--|--678--|--(($2-$1) / ($1) ) *100)
R2|--124--|--346--|--679--|
R3|--125--|--347--|--670--|
the column results must remain in the same format, but the calculated item must be in the format %9.99 (to see the percentage change)
any other suggestions?

Need Urgent Help on Calculation items issue In Discoverer Plus

Dear Discoverer Experts,
I would need help on the below scenario:
A
147644.08
147644.08
Maximum: 147,644.08
B
142494.65
5149.43
Sum: 147,644.08
C
5149.43
142494.65
0
Here A, B, C are columns and C column is Calculated Item(A-B) and Maximum and Sum are Totals items, everything working fine.
The intent is that I would need the difference between totals items I mean Maximum and Sum , i.e Maximum-Sum (147,644.08 - 147,644.08) =0(in this case), but I am not able to get it, can anyone help me on this that would be greatly appreciated.
Thanks
skat

Thanks Tamir for your response, i am getting ZERO
But when i create new calculation item for examle TEST with calculation MAX(A) over () - SUM(B) over ()
then i am getting new column next to C with name TEST and with two rows of data with 0 (Zero)
like this
TEST
0.00
0.00
why am getting two rows of data, and that too can't we get this ZERO under C column at the same Row as MAX and SUM
(Or)
if not possible then after adding coumn TEST next to C column can we get ZERO in the row as MAX and SUM
either way would be fine, can any one hlep on this issue.
Thank you
skat

How to add a new item-position to salesorder in dialog

Dear all,
i have a request to add a new item position to an existing sales order in dialog. The information I have are material number and quanity. After adding these infos the system should work like the user has added the line manually (Entered MatNr and Quantity and pressed Enter). All error messages and checks and rereading data should be processed. Any idea how to do this?
Every help is welcome.
Best regards
Roman

Maybe not exactly. The user jumps from an "extension" button to a dialog where he can select materials an quantity´s these should be added as new positions to the order.
BR
Roman

Adding item positions with reference to contract in sales order

Hi all,
I would be very grateful if some of you could help on this:
I have a requirement to add lines with reference to a contract while the user is creating or modificating it via VA01 or VA02. The logic flow will be as follows:
if the user enters a new item position with reference to a contract, and the qty entered exceeds the qty in the position selected of the contract, we have to skip the standard error message and try to spli the quantities in several positions with the same material in the contract.
As an example:
the contract 000000000001 has 5 lines:
line     material       qty
01       mat1           100
02       mat1           50
03       mat1           50
04       mat2           n/a
05       mat2           n/a
if the user picks up the line 02 of the contract to create a new line in the sales order, and enters 180 as qty, the sap standard will raise an error, saying the qty has exceeded the contract qty. Ok, we have to skip that error (maybe could we set it as a warning??) and 'split' the qty as follows:
in the sales orders, 3 lines will be created automatically
line    material     qty
     mat1         100
     mat1         50
     mat1         30
and of course, the released quantities in the contract must be updated: i.e the contract should be as follows:
line     material       available qty
01       mat1           0
02       mat1           0
03       mat1           20
Any ideas? : )
What i've done by the moment is to check is that 'split' is possible, in userexit_save_document. If not (e.g. if the user enters 220 for mat1 in the previous example), a custom error will appear. If it is possible, then the sales order will be created (only with the line the uswer entered) and I will trigger somehow a FM processed in background to modify the sales order.
my question now is: how can i add lines to the created sales order, making reference to some contract lines?
I've seen BAPI BAPI_SALESORDER_CREATEFROMDAT2 is used to create a document with reference, but can i use it to MODIFY an existing sales order?
any help would be greatly appreciated.
thanks a lot for your help.
regards.

Hello,
there's a function module called 'BAPI_SALESORDER_CHANGE', which could change a sales order. The problem could be,that these BAPI's enque the salesorder. So if you start them in background via an userexit, you have to be sure that the salesorder is updated and dequeued by posting.
An other way could be to use the exit 'userexit_check_vbap' in MV45AFZB. It's called after creating a new position or changing a position. All existing positions at that time in a internal table 'XVBAP', which you could change. (But be carefull, that you don't create an endless loop !).
The check about the contract quantity is in a form routine called 'vbep-wmeng_pruefen_folgebeleg(sapfv45e)'.
Have a look into the form 'vbap_pruefen_ende' in FV45PFAP_VBAP_PRUEFEN_ENDE. There's the whole thing done including the call of the userexit.
Regards Wolfgang

New line item in the service contract

Hi Gurus,
I have requirement to add the new line item in the service contract. Details are as follows.
as per the requirment, manually we are entering the outbound category via web Ui (service -> service contract).Now I have to develope a badi/method in standard badi exec_methodcall_ppf which will insert a new line item with the same material as of outbout category but with the item category as inboud.
could you please help in how can I maintain the new line time. I know we have to use the crm_order_maintain FM but I'm confused what all parameter we need to pass to maintain this.
can someone please share the code to do that. TIA

Hi Paul,
It seems there is no option in changing the condition records at the billing plan item level.
Please try the following.. see if it helps. To execute the invoices with new condition record values directly, make the settings at the billing item category level goto -- the billing document frame -- under serivces frame -- pricing type select option Carryout new pricing (Option B). This option updates the billing document at the time of invoicing with new price calculation.
please see if this can help you out.
Have a good day!!!
Nandu

I am doing pricing? How to introduce new calculation type ...

Hi,
As part of New condition type creation, I am in position to intrduce
New calculation type is "X" - Time based by hrs
New scale basis is "X" - Time based by hrs
It really very urgent, any oss note will also help.
Laxman

Hi Laxman,
Instead of Defining New Calculation type
U can Go for "Formula" (G) in the Calculation Type in the Defination of the Condition type and ask ABAP er to write the Code for u r Calculation type as a Routine and use that routine in the Pricing Procedure " Alternative Calculation Type"
and also For Scale Basis Use the Formula Based Scale( G) in the definition of the Condition type. and Again Ask ABAPer To Write the Code to ur Calculation Base and use the routine in the defination of the Condition type in the View "Scales" " Scale Formula"
This will Help you ..
Let me Know U have Any Doubts in this ..
Reward If Helpful..
Regards..
Praveen Kumar.D

Trying to make new text item in Pages 5.2 using Applescript

I am trying to upgrade(?) from Pages 3 to Pages 5 and have a script that used to make a new document with text boxes. Previous line was:
make text box with properties {object text:receiptDD, vertical position:6.9, horizontal position:2.7, height:0.5, width:1, extra space:0}
Have the line changed to:
make new text item with properties {object text:receiptDD, position:{6.9, 2.7}, height:0.5, width:1}
but fails with error "Pages got an error: Don't know how to create TMAScriptInfoProxy" number -2763
Not sure where to go from here, searched various forums but cannot find a solution, any guidance gratefully received.

Does your Photoshop menu bar have a 3D item? If not make sure you machine meets CC requirements and thatou GPU is enabled in you Photoshop preferences performance section

New Line Item to be created in sale order

Hi,
Client requires a new line item to be created in sale order for particular regions only..
Scenario 1 :
For a particular region Additional Tax shud be calculated on Basic Price .
Scenario 2 :
For a particular region Cess on Vat need to incorporated.
Client wants to maintain condition records in Cond Type :UTXJ and also the client shall maintain a 2 different Tax Codes for above each scenarios, In future in case Additional Tax or Cess on Vat is applicable to other regions it shud get posted in their respective G/L's
Plz suggest...
Thanx...

It would be wonderful had you shared your suggestion in this forum itself rather sending to personal mail ids which is against the rules and regulations of this forum.
I request you to dont do that please.

How to rename calculated item?

Hi
I defined a calculated item in Disco Admin and used it once in a workbook in Disco Plus.
Later I changed the name of the calculated item. Unfortunately the change doesn't take effect in new(!) workbooks. It is still the old name.
This doesn't happen to calculated items which I renamed before having used them.
How can I get rid of the old name without changing it every time I set up a new workbook? It must be saved somewhere.
Thanks
Franziska

Hi,
Try changing the heading property on the calculated item in the EUL.
Rod West

New calculated item positioning

Similar Messages

Maybe you are looking for