New Condition has quantity error on sales order?

I have created a new condition type for courier charge
Settings:
Condition class = A  discount or surcharge
Calculation type = C quantity
But when the sales order is created, the Calculation Type C (Quantity) turns into B  (Fixed) !
As a result,  condition amount is not  multiplied with quantity
So if the condition record = $75  and quantity is 1  the value = 75
But when the quantity is increased to 2 , even then the value remains $75  and does not convert to $150 
It is so because the calculation type on the sales order is B Fixed
Why is it that in SPRO the calculation type is C -- but on sales order in becomes B Fixed ?
Please help solve the riddle
Thanks,
SM

Hi,
Which condition type ,did you take for this?
Please refer K005 condition type.
FYI,see below snap shot.
BR's,
Naren

Similar Messages

  • New condition in pricing procedure in Sales Order

    Dear SAP Gurus,
    I want to add one new condition in pricing procedure in Sales Order.
    Earlier we were having following conditions.
    PR00   (price)                           1000 Rs     (say)
    MWST                                     100%    sub cond.
    ZSER  (service tax)                   12%
    ZSRT                                       100%  sub cond on ZSER
    ZEDU    (Education tax)             3%(on ZSER)
    ZEDT                                        100% sub cond on ZEDU
    Now I want the structure to be
    PR00   (price)                           1000 Rs     (say)
    MWST                                     100%    sub cond.
    ZSER  (service tax)                   12%
    ZSRT                                       100%  sub cond on ZSER
    ZEDU  (Education tax)               2%  (on ZSER)
    ZEDT                                        100% sub cond on ZEDU
    ZHED (Higher Edu. Tax)             1% (on ZSER)
    ZHET                                        100% sub cond on ZHED
    For this I have Done following Customizings
    Created new Condition Types (ZHED & ZHET ) by Coping from ZEDU and ZHET respectively.
    Maintained pricing procedure with these conditions.
    Made condition Record for ZHET through VK11.
    But I am not able to set ZHED as 1 %
    Please guide where to configure this and how ?
    Thanks & Regards
    Rajesh

    Hello,
    Have you maintined the calculation type of the condition type ZHED as A - Percentage ? If no, then maintain the same. If it is already maintained, then let us the error when you are trying to maintain the condition record as 1%.
    Prase

  • New Condition Table not working in Sales order

    Dear All,
    I am facing problem in pricing procedure. I have created new condition table(LIFNR & ROUTE), included Vendor(Fwd Agent) and Route in condition table with sales area. I have added that condition table in access sequence and assigned access sequence to condition type. Then Condition type added into pricing procedure and assigned pricing procedure to document type.
    In sales order I've added route and fwd agent but while checking in analysis system does not determine route and fwd agent.
    Thanks and Regards,
    Kaushal

    hi,
    i have a query to ask why you need LIFNR in condition table creation.
    where in sales order it will trigger automatically.
    please check the config settings for route determiantion automatically.
    so that if route comes automatically into the sales order then from where you will trigger LIFNR.
    please clarify.
    regards,
    balajia.

  • How to Update the New Condition values for list of sales orders

    Hi
    Client requirement is they have set of old Sales Orders to be executed. But the material prices have been revised in the meantime. Now they want to update the current prices in the sales order before proceeding further.

    Hi,
    Though Lakshmi suggested you the right option, it may not be carried out for Sales Documents in random and will be much suited for Sales Documents with continuous sequence like 00010, 00011, 00012, 00013, etc.
    If you want to New Pricing to be carried out for Specific Lists of documents like 00010, 00017, 00043, 00057, etc, then you can do by following option:
    Go to Transaction "MASS", Select the Table - VBAK and Field - PRSTD and proceed by entering the Sales Documents Lists to carry out New Pricing.
    Hope this will be helpful to you.
    Rgds,

  • Do not carry out new pricing when plant change in sales order

    Hi,
    I have one z field in additional data tab in sales order. This field store the original plant if anyone has changed plant in Sales order. My requirement is to trigger the pricing in sales order with this old plant. I am not getting any exit for this.
    Suggest me the solution.

    Hi
    In the comments for the subroutine, it says:
    *       Parameter new_pricing controls the new pricing in the calling *
    *       form. It can be filled according the the allowed values       *
    *       of domain KNPRS (Pricing type), for example:                  *
    *       ' ' = no new pricing                                          *
    *       B   = Carry out new pricing                                   *
    *       C   = Copy manual pricing elements and redetermine the others
    So, you must write:
    If VBAP_WERKS NE *VBAP_WERKS.
      new_pricing = 'B'.
    Endif.
    Regards
    Eduardo
    Edited by: E_Hinojosa on Aug 25, 2011 8:21 AM

  • Confirmed quantity in the sales order coming as 3.5 ea

    Hi Gurus
    The confirmed quantity in the sales order coming as 3.5 ea where the order quantity was 10ea.I checked CUIN for EA the decimal places is given as 0 which is very much correct moreover I checked the material master in additional data I have not find anything abnormal.The order was created by a batch job.Please help.

    Hai,
    The system has concluded that 3.5 EA for the confirmed quantity means the remaining part of the stock are already allocated to some other sales orders.Out of 10 EA only 3.5 EA are  in the stock.
    You can view through the MD04 and then enter the plant ,material and then check the quantity that are allocated to the various orders.
    Please revert for any.
    Kalyan

  • Error in Sales order - Consumption account not found

    Hi Gurus,
    I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation  class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
    But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
    Please help me . This is critical.
    -Prashant

    Hi,
    Your observation is perfectly write, the possible errors are
    1.  Check the combination of Account modifier of Purchase order account assignmnet or PR.  Based on the modifier and check the relevent combination in OBYC
    Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
    2.  If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
    Rewards if it helps
    Regards
    Goutham

  • Condition records  wrongly populated in sales order instead of billing doc.

    condition records are maintained billing wise to populate in the billing document for pricing condition where as while creating the sales order   itself i am getting the condition records populated in the sales order which is not correct as it needs to populated in the billing document only

    yes after looking at  pricing analysis itself we have  concluded that these condition type has the key combination  billing document F2 and displays the condition record within the sales order itself, but this condition record with key combination billing doc. F2 should be populated in billing doc  only what is the reason behind this

  • Condition Type for commissions across sales orders

    Hi,
    I have a requirement for which I need inputs:
    We have sales employee who will get commissions based on the total sales they make. The relevant sales employee will be brought into SAP as a business partner (specific account group and hence partner function).
    A tiered commission would be set up for each of the sales employee, for e.g. 1 to 10,000 , commission is 2 %, 10,000 to 30,000 commission is 3 % and above that is 5 %. The commission applicable should be determined at the time of sales order creation. The commission applied to an order should be determined based on all the sales orders for the sales employee and not that specific sales order. For e.g. if the sales employee has already got one sales order of worth 6000 and he gets another order of worth 9000, then as per the example, he is entitled to 2 % for 4000 of the order (his total sales now reacheds 10,000 and he moves now into the next bracket) and is entitled to 3% for 5000 of the order value. Also in case any order gets cancelled then the cumulative sales value for the sales employee should take care of the cancelled order.
    I have a condition type where by I maintain the scale and the corresponding commision rates for the sales employee. I have ticked the condition update setting so as to cumulate the order value. I have the following questions:-
    1. How do I ensure that the rate applicable for the specific order takes into consideration the past sales orders for the sales employee and not only that sales order.
    2. How do I determine the condition record based on parter function (partner funtion for the sales employee)? I did bring in the partner role in the pricing communication structure but that does not work.
    3. How should I take care that the cancellation or sales order takes out that value from the cumulative value for the condition record. As of now it does not.
    A quick response would be highly appreciated.

    Hi Kastubha,
    Thanks for your reply. I am trying now to use rebates for this functionality. However I have few questions and I am unable to progress beyond a point:
    Let's say that for a sales employee i set the rebate agreement. The sales employee's commission is as follows:
    1 - 10,000  (1 %)
    10, 000 - 30,000 (3%)
    30,000 and above (5%)
    The calculation type for condition type is percentage, scale type is graduated to interval scale.
    I am trying to use scale in rebate agreement to set up the commission structure for the sales employee. However, there is only accrual rate that I can enter. There is no place to enter the accrual rates as per the scale.
    Because of this, what is happening that the rebate record determined is the accrual rate and not what is as per the scale. Also I need the condition record to keep track of total sales for the employee so that it knows what commission rate to apply based on how much the sales employee has achieved.
    Am waiting for you inputs.
    Best Regards,
    Sunil

  • IDOC Generation For Quantity Change in Sales Order.

    Hi to all,
    I have a very urgent Requirement,Please give correct solutions.
    Requirement:
    When a change is made in the quantity of the sales order line item,an idoc should be trigerred . I have done done all the configurations ,still no results.I am new to ABAP , GIve good solutions ,i will reward you.

    Hi there,
    Could you please explain step by step procedure of your req. coz it is not clear.
    What is BoQ?
    Customer gives raw material with out knowing the specification of sheet?
    Thanx
    Jess

  • ATP check partial Quantity allocation to Sales Orders

    Hi,
    Our client has three different sales order types for processing sales differently for the same materials.
    While doing ATP check they have a order of priority i.e ZOR1 -> ZOR2 -> ZOR3 with ZOR1 highest priority.
    For sales order type ZOR2 currently they donot have partial quantity allocation to sales orders.i.e if two orders, Order 1 created with 100 Qty and other Order 2 with 50 Qty and if ATP is 50 Qty.
    System is allocating material to Order 2 which has order quantity 50 ( Which equals ATP Qty )
    Now the client requirement is to configure system such that it does partial allocation to Order 1 ( order qty 100, where as ATP Qty is 50 ) i.e system should allocate even partial quantity to sales orders, that too in FIFO ( system should allocate ATP qty to order created first then next and so on )
    Please let me know what changes i need to do to achieve the above functionality in SAP system.
    Thanks
    Venkata Rama Reddy.K

    Dear Venkat,
    Please check the customer master for the customer which you have maintained in the 1st order. If the customer allows partial delivery, them the system will allocate the stock to the order which is created at first.
    At the time of ATP check(In Availability Screen), you do need to choose, One-time or System proposal, which will allocate the stocks partially to the 1st order as you don't have enough stock.
    Check out the settings in the customer master (for the customer in the 1st sale order) under Shipping Tab.
    Partial delivery per item  D/A/B
    Max. partial deliveries    >0
    (And more thing, you mentioned that sales document type is having priority. As of I know - there won't be any setting which will set particular sales document type with high priority. If you are really doing that kind of setting - update the same in this forum - it may help others..)
    Hope it may help you.
    (Venkat: Has your issue solved? Kindly update in the forum - if your question is answered)
    Thanks,
    Venkatesh.S.P.

  • Pricing Error on Sales order :Critical:

    Hi all,
    I'm creating a sales order,  where in I'm getting Pricing Error.
    Condition record is maintained for PR00 in USD
    It is getting populated but showing red signal.
    VPRS also showing Red signal. If I go in analysis of VPRS , it shows message exchage rate error. But Company code currency & document currency is same USD.
    so It should not give this error.
    But If I go to customer master & in sales area tab & maintain currency as USD, then there is no error in Sales order. All is fine.
    But logically , system should not ask the exchage rate as Company code & document currency both are USD.
    I expect some quick replies as we are now in impact analysis & on verge of go live next month.

    Thats what I mention in previous post that
    Its a standard beheviour, Document currency is proposed/determined in sales order or billing doc on the bases of customer master record of the Sold-to Party.
    And exchange rate for same currency is out of question.
    Thats why, when maintain curreny in customer master (Sold-to Party), you don't get error.
    As, system is able determine/propose a currency for document currency.
    Further, what you can do is press F1 button on the following fie,lds for more clarification.
    > Sales Order - Header  - Sales Tab - Pricing & Statistics Section - Doc. Currency Field
    > Customer Master - Sold-to Party - Sales Data - Sales Tab - Currency Field
    I hope that clarifies.
    Regards
    JP

  • VPRS condition not floating in to sales order...

    Good evening every body...
    My query is VPRS condition not floating in to sales order...
    Please give your valuable inputs
    I checked Pricing procedure analysis
    giving error requirement 004 not fulfilled
    Note:
    I checked determine cost in Item category (TAN)
    VPRS condition in my pricing procedure
    I maintained Standard price in Accounting1 tab of MMR
    Valuation class I maintained in MMR
    VPRS condition type I maintain condition category-"G"
    Anything I missed out???
    Regards,
    Krishna

    In my view, the information provided by you is not sufficient to provide you an exact solution.
    As based on & differs business scenario to business scenario you are following.
    Like whether it is BOM, MTO/MTS, Free Goods, batches, third party sales, Order-related billing or Delivery-related billing:...
    Business Process
    Source of costing
    - Order-related billing
    Valuation price of the material master
    - Delivery-related billing
    Goods issue
    Further there are various way to carry out costing at Sales order, like
    - Product costing
    - Unit costing
    So, you can check whether EK01/EK02 or any other cost related is executing prior/take preference to VPRS in your pricing
    Also. kindly check your entries for Account Determination for valuation area(T001K) by using TCode OMWD.
    If everything is fine, then test run a Sales cycle till Billing, so as to see whether at billing VPRS is reflecting or not.
    If in case you need further assistance, do let us know.
    Regards
    JP

  • How To Get The Total Delivered Quantity of a Sales Order

    Hello All,
    I have a requirement of getting the total delivery quantity of the sales order .I have checked it in LIps table but I am getting partially delivered quantity for a schedule line item.Can any one tell me how to get the total delivered quantity.
    Regards,
    Pavani.

    Hi
    Check the Table:
    VBEP  - Sales Document: Schedule Line Data.
    Inside the table check the Quantity Fields.
    Regards,
    Sreeram

  • Condition type not coming in sales order

    Hi,
    we have a condition type Z026. The issue is that  it is not set in the order but the condition records exists. The pricing analysis shows that condition reocrd is missing but the fact is the condition record is there. The acess seq is Z026 and there are many tables in the acess sequence.
    The first table in the access seq is 906 and the condition record exists but still the system says that the condition record is not found using  cond preliminary step (header fields like customer/sales org/div). the cond record is maintained for  relevant sales org/dist channel/customer/material. cond preliminary step means that system first looks for the header fields but everything is there.
    The condition is active and the conditon is created on 21.7.10 with validitity from 21.7.10 to 31.1.2010 and the pricing date in sales order is 27.7.10. so everyhting is fine but yet the condition is not coming in sales order
    what could be the issue.
    regds

    Hi,
    Now try creating a sales order with 20.07.2010 as the pricing date. It will work. Create another order with 21.07.2010 and it will not work. If so, it is due to the validity date. When you give 21.07.2010 as validity date and there is already another record which was valid on that date, the gap of one day can happen and we have experienced this. There is even an OSS note explaining this concept, which makes sense business-wise.
    However you check the scenarios I have mentioned. If the behaviour is as I have mentioned, then you have to change the pricing date of your problamatic sales order to one day earlier, or move the validity date one day earlier.
    If the behaviour is different, pls lemme know

Maybe you are looking for