New error messages related to OHW - filling up error logs.

We've recently received a new delivery of help files (new helpset), but there have also been many other changes to our base software system in the interim. This makes it hard to nail down the culprit.
That said, we are now seeing two messages in the error log any time we access help. I'm wondering if anyone else has seen these, and have suggestions as to the root cause. They are as follows:
...<OHWLoggerUtils> <errorFoundLinkToInvalidTopicID> invalid topic id link: STADG reported from http://127.0.0.1:7101/sta-help/faces/helppages/config.OHW+Servlet+1/locale.en/
<OHWLoggerUtils> <errorFoundLinkToInvalidTopicID> invalid topic id link: STAIN reported from http://127.0.0.1:7101/sta-help/faces/helppages/config.OHW+Servlet+1/locale.en/
<OHWLoggerUtils> <errorFoundLinkToInvalidTopicID> invalid topic id link: STAAG reported from http://127.0.0.1:7101/sta-help/faces/helppages/config.OHW+Servlet+1/locale.en/
<DocumentUtils> <getDocument> ADFv: Trouble getting the mutable document from MDS.
<DocumentUtils> <getDocument> ADFv: Trouble getting the mutable document from MDS....
We are seeing many of these messages in a row, but they are all like the two types you see above.
Just for completeness, there is one other error message filling our log which we also have not been able to resolve. This one has been around for a while longer:
<OHWFilter> <doFilter> Resource URLs should not contain "helppages.resource"; they should go through the servlet path "/ohr".
<OHWFilter> <doFilter> Resource URLs should not contain "helppages.resource"; they should go through the servlet path "/ohr".
... <more of the same>
Any help or pointers would be appreciated. We are using JDev 11.1.2.3.0, and OHW 5.0
Mitch
< name, title, organization, telephone information deleted by moderator -- you need to post this to MOSC and not this public forum >

Hey, tried uploading my first DPS app since August 28 and got rejected. I edited my folio and re- created the app, did the hole process again and today I uploaded the new app thru App loader. Everything was ok, but as soon as I clicked the review app in itunes connect, and the status changed to: "Waiting for review" Got an itunes Email saying this: ..."REDUNDANT BINARY UPLOAD - there already exists a binary upload with build version '32.0.0.8.99116' for train '1.0.7'... Once these issues have been corrected, you can then redeliver the corrected binary."...
I am completely lost, I don't know how to solve this issue, don't know what steps to follow and im in desperate need of help. The app is a magazine and they've been waiting its launch since September 1st.
The hole precess relies on me and I ran out of options... Can someone Help me?

Similar Messages

Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

Hi 99jon,
Many thanks for that. Had been going through this list yesterday and now again today:
Ref Solution 1: Lightroom is at its latest update
Ref Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
Ref Solution 3: Lightroom doesn't allow me to do anything after the error message appears
Ref Solution 4: don't have any Nik Software plug-ins
Ref Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
Ref Solution 6: I don't have a different user account on my mac.
Not sure what else to do.

After adding a flashfile .swf into a dreamweaver page and trying to run it, I get an error message related to Javascript

after adding a flashfile .swf into a dreamweaver page and trying to run it, I get an error message related to Javascript
I have no trouble viewing other websites with (most likely), flashfiles.
Here is the the PopUp message:
"Adobe-warning Adobe Flash PLayer has stopped a potentrially unsafe operation......"

In newer versions of Flash Pro, you can export to HTML5 Canvas, that's probably what they're talking about: Flash Professional Help | Creating and publishing an HTML5 Canvas document
.FLV and .SWF are Flash formats that won't show up on iOS (or an ever increasing number of other mobile devices). Mobile Flash was killed by Adobe a couple years ago, so the number of mobile devices that can see it is dwindling rapidly, don't use those formats if you want your viewers on mobile devices to see your content.

I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your

I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your question?

Have you not got the music on your computer and/or on backups on, for example, external drives or CDs/DVDs ?

When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Displaying an error message with a link to the error field

By default, ADF validation usually displays an alert with an error message and a link to the error field.
I have some custom validations where I finally display the error message with this:
public static void MessageError(String messageText){
    //String messageText="No se han encontrado estos datos";
    FacesMessage fm = new FacesMessage(messageText);
     * set the type of the message.
     * Valid types: error, fatal,info,warning
    fm.setSeverity(FacesMessage.SEVERITY_ERROR);
    FacesContext context = FacesContext.getCurrentInstance();
    context.addMessage(null, fm);
My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
Is there any way to get this ?

Can't you include this in your message?
You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
Timo

Time Machine Error Message: "sparsbundle could not be accessed (error-1)

hi,
I am running snow leopard on my iMac and have a mac mini connected via ethernet running Mac Leopard Server version 10.6.
I backed up my iMac onto my Mac Leopard Server using Time Machine about a year ago and then I turned it off and haven't done it since. I turned it on today and was attempting to back it up, but I keep getting the following Time Machine Error Message: "sparsbundle could not be accessed (error-1) when i try backing it up.
Any thoughts on why and how to fix this? I can access my server via screen share, so i know its accessible and I can get online with it as well, so its connected to the Internet.
Any ideas?
Thanks,
Josh

jnp1 wrote:
not backing up yet, but more progress than before...now its on an infinite loop of "preparing" and "scanning"...just keeps doing that over and over...but never actually backs anything up.
Anything in the log files on either the client or the server?
Usually, when Time Machine is being flaky, the easiest solution is just to delete the backup and start a new one. Since you have a server, you could just move that sparsebundle file elsewhere instead of deleting it. That is, of course, assuming you can still open it. If not, then it doesn't matter because that backup is toast.

"DD8x". Error message for loading process:Operating system error !

Using the OLE command I receive the following error:
Cannot load the file "File Name" with the loading process "DD8x". Error message for loading process:
Operating system error <> !
strCommand ="DATAFILEIMPORT('J:\ctf\GM\040119-2\dat7.dat','',0)"
lsuccess = IDIACommand.CmdExecuteSync(strCommand)
I get the same error with the "DataLoadHdFile" command.
After the error happens, I cannot load any files in the directory until I
reboot DIAdem.

Hi punkmonkey,
I'm curious why you compare the results of the "DataLoadHdFile" command with that of the "DataFileImport" command. The former is a time-honored DAT-file-specific command for only reading the header file contents-- NOT the data, and the latter is a brand new DIAdem 9.0 function for loading all sorts of data files-- TDM files included.
If you want to load a DAT file using an OLE command, why don't you try the time-honored "DataLoad" command, which is specifically designed for loading DAT files? The "DataLoadHdFile" command is really only used to do selective loading (specific channels or rows) of part of a DAT file. Do you want to load selectively, or do you want to load all the channels from the DAT file?
When you get the same error with
the "DataLoadHdFile" command, are you executing that command also through OLE automation, or directly in DIAdem? What happens if you try both the "DataLoadHdFile" and the "DataFileImport" commands directly from DIAdem (no OLE)?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Print a custom Error message in the XML bursting program's log file...

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

When my lightroom opens up I keep getting an error message that states, "Lightroom encountered an error whne reading from its preview cache and needs to quit" I have relaunched it a number of times and keep getting the same message.

when my lightroom opens up I keep getting an error message that states, "Lightroom encountered an error whne reading from its preview cache and needs to quit" I have relaunched it a number of times and keep getting the same message. Any thoughts on how to fix this?

You need to delete your preview cache and have Lightroom rebuild it. Cache location can be found here.
https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic

HT201210 How do I download iOS 6 on my iPhone? Keep getting error message saying "unable to download an error occurred while downloading iOS 6?

How do I download iOS 6 on my iPhone? Keep getting error message saying "unable to download an error occurred while downloading iOS 6?

How do I download iOS 6 on my iPhone? Keep getting error message saying "unable to download an error occurred while downloading iOS 6?

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes. What next? I've not had this problem with other updates requested by Apple.

I have also had the same problem with my Win 7 32 bit computer. I had great help from Apple techs in Montreal and Orlando for 2.5 hours. They helped me remove every trace of Apple products and clean the registry in two different ways. Each install gave the same problem! If Apple techs can't fix it (on some of our machines) then we are really in trouble. They promised to raise it with the "engineers" and get back to me with a solution. I am waiting and hoping. Otherwise maybe version 11.1.5 will have a fix ??

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
type: Exception report
message:
description: The server encountered an internal error that prevented it from fulfilling this request.
exception:
ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
root cause:
NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
note: The full stack trace of the root cause is available in the logs.
Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!

Hi Mesut,
you can refer the link for migration
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
regds,
aman

Sender JMS Adapter error: The JMS provider gave the error message as Not permitted, and the error code is null

I am trying to connect tibcoems with PI using a Sender jms adapter.After successfully installing the drivers , the sender adapter goes into error.
"The JMS Provider gave the error message as Not permitted, and the error code is null"
The Transport protocol is 'Access JMS Provider with JNDI' and i have been given the required parameters from the tibco guys.
Your input are highly appreciated.
Shyam

Hi AQmit,
Thanks for the reply.
Please find the screenshots of what i am trying to do.
Also, Can u direct me how to check the right logs?

New error messages related to OHW - filling up error logs.

Similar Messages

Maybe you are looking for