New Error : Optimize-Volumes -SlabConsolidate gives "ObjectNotFound" error after Enumeration

I have a server that's been running this command regularly for a long time and working successfully.
Optimize-Volume d -SlabConsolidate -Verbose
The last day or so the command nows gives the results below. I highlighted where the command dies once slab consolidation kicks in. So far everything still seems to be working but this strikes me as a bad event. All the other volumes in
the same storage pool work just fine. There has not been any disk errors or bad blocks on any of the drives and the system hasn't even been powered off during this time. I did do a reboot to try to clear the error but it didn't help.
I'm at a loss on what to do. Can anybody help?
Thanks.
VERBOSE: Invoking slab consolidation on bfd (D:)...
VERBOSE: Slab Analysis: 0% complete...
VERBOSE: Slab Analysis: 100% complete.
VERBOSE: Slab Enumeration: 0% complete...
VERBOSE: Slab Enumeration: 1% complete...
[1-98% cut out]
VERBOSE: Slab Enumeration: 99% complete...
VERBOSE: Slab Enumeration: 100% complete.
VERBOSE: Slab Consolidation: 0% complete...
Optimize-Volume : The requested object could not be found.
At line:1 char:1
+ Optimize-Volume d -SlabConsolidate -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (MSFT_Volume (Ob...9-ab82-7184...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 6,Optimize-Volume
Same problem here. Just started happening.
Event Viewer
The volume Media Server (D:) was not optimized because an error was encountered: Element not found. (0x80070490)
Event ID: 257
System
Provider
[ Name]
Microsoft-Windows-Defrag
EventID
257
[ Qualifiers]
32768
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-02-13T08:25:49.000000000Z
EventRecordID
114618
Channel
Application
Computer
WSE2012-Server.Workgroup.local
Security
EventData
Media Server (D:)
Element not found. (0x80070490)
00000000A40500005105000000000000629468641336AAB85B55B1B5B038000000000000
Binary data:
In Words
0000: 00000000 000005A4 00000551 00000000
0010: 64689462 B8AA3613 B5B1555B 000038B0
0020: 00000000
In Bytes
0000: 00 00 00 00 A4 05 00 00 ....¤...
0008: 51 05 00 00 00 00 00 00 Q.......
0010: 62 94 68 64 13 36 AA B8 b”hd.6ª¸
0018: 5B 55 B1 B5 B0 38 00 00 [U±µ°8..
0020: 00 00 00 00 ....

Similar Messages

Optimize-volume -retrim gives error Optimize-Volume : Not enough storage is available to complete this operation

We ar e working with a 3par san combined with a hyper-v cluster. I have some virtual machines with direct attached storage. when i issue the command optimize-volume -driveletter x -retrim I Always get an error Not enough storage is avalable to complet this
operation. The command defrag /L gives me an out of memory error. All volumes are over 2 TB

Hi,
Thanks for responding,
We are working with Windows 2012 R2. We are running the optimize-volume cmdlet on the guest system. The guest system is directly attached to the SAN through the virtual fibre channel adapter. Although we have some volumes with less ten 15 % space we
also have tested it with volumes which have more then 25% space. All gave the same error so I'm wondering if it is the amount of memory addressed to the virtual machines what give the problem
The HP 3Par San normaly will do it automaticly but on 1 volume it is not cleaning up after we deleted 2 TB on disk space.

New HP wireless printer install gives me Error Code 43

I just bought the HP wireless and networking capable all-in-one printer, the C309 series (no indication of exact model number anywhere on the machine, but the maybe it's the C334, since that's near the serial number on the back.
I connected it to my wireless network with no troubles. I inserted the install disc into my macbook pro, and got past the installation, to the setup step when I got the news:
"The operation can't be completed. An unexpected error occurred (error code -43)."
Does anyone have any ideas as to what the problem is here?

Try here:
http://discussions.apple.com/forum.jspa?forumID=1224
Al

Site files moved to new (identical) server; now iWeb gives "Publish Error"

Our school district just replaced the web server where our teachers publish iWeb sites. All user accounts, passwords, IP addresses, and content moved over just fine, but now when teachers try to publish updates to their existing sites on the new server, iWeb throws a "Publish Error: Unable to communicate with FTP server..." error. Test Connection in the publishing settings works fine, as does logging in to the server using an FTP application, so we know the user accounts are okay.
An interesting twist: I published my existing site (that was experiencing this issue) to a local folder on my desktop, and used a standalone FTP application to upload and replace my iWeb site files manually; when I went in and set the iWeb publishing settings back to FTP server, it was again able to publish updates to the site without issue.
We're looking into a permissions problem on the files that were moved from the old server but so far have not been able to find any differences.
Does anyone have any ideas what may be going on? We have a couple hundred people this is affecting and if it's something we can fix on the back-end instead of having to manually replace all of those site files, that would be a great thing!

The only time that I had to move a bunch of sites to a new server I was instructed by tech support to download all the sites/files and upload them to the new location.
I would assume that, if you don't do this, the permissions could get messed up.
My hosting service uses Webshell4 to manage files on the server. To change permissions you need to select the site folder in Webshell4 and click the "CHMOD" button to get a window that allows you to do this.
Read permissions should be checked for User, Group and Other.
Write permissions would normally be set for User only.
You could try this with one site to see if this is what's required but your hosting service tech support should really help you with this. That's what they are there for.

HT1338 I was in the midle of installing new os on my new macbook air but it gives me error what to do?

please help me!

An error has accured on app store purchases,and os app was stucking on waiting,

Cannot optimize volume - Receive error "The specified extrinsic Method does not exist"

When I try to optimize a volume on a server running Windows Server 2012 (R1). I receive the below error. This volume is an ISCSI target to our Compellent SAN. Other Servers don't have an issue with volumes created on the same SAN and I have already ran ChkDsk
and it returned no errors. Oddly enough I can run a "Defrag T: /D" but a "Defrag T: /O" returns
"Incorrect Function. (0x80070001)" (Incidentally an "Optimze-Volume T -Defrag" also works)
Any Ideas? I'm stumped!
Command:
Optimize-Volume -DriveLetter T -Verbose
Error:
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
VERBOSE: Slab Analysis: 100% complete.
optimize-volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ optimize-volume -DriveLetter T -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume

I did stumble upon that article as well and working through it didn't help. This is an Exchange 2013 server but I wouldn't think that that would exclusively cause a problem like this (unless there is something under the hood that Exchange 2013 is secretly
doing). The C drive is for the OS, the M drive is for the Exchange DB, and the
T drive is for the Logs. The C drive is "directly" connected and the M and T drives are on the same SAN (different LUNs) via iSCSI. This is running as a virtual guest on VMWare ESXi v5.5. I have other servers setup the
same way (not Exchange servers though) with drives on the iSCSI SAN and there are no issues when I run those Optimize-Volume commands. Here is some more output from the console:
PS C:\Users\administrator> Optimize-Volume -DriveLetter T -Analyze -Verbose
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
VERBOSE: Slab Analysis: 0% complete...
Optimize-Volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ Optimize-Volume -DriveLetter T -Analyze -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
PS C:\Users\administrator> Optimize-Volume -DriveLetter M -Analyze -Verbose
VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchMailStoreDB (M:)...
VERBOSE: Slab Analysis: 0% complete...
Optimize-Volume : The specified extrinsic Method does not exist.
At line:1 char:1
+ Optimize-Volume -DriveLetter M -Analyze -Verbose
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-93f1-0050...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
+ FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
PS C:\Users\administrator> Optimize-Volume -DriveLetter C -Analyze -Verbose
VERBOSE: Invoking analysis on (C:)...
VERBOSE: Analysis: 0% complete...
VERBOSE: Analysis: 22% complete...
# ... Repeated ...
VERBOSE: Analysis: 94% complete...
VERBOSE: Analysis: 99% complete...
VERBOSE: Analysis: 100% complete...
VERBOSE: Analysis: 100% complete.
VERBOSE:
Post Defragmentation Report:
VERBOSE:
Volume Information:
VERBOSE: Volume size = 84.48 GB
VERBOSE: Cluster size = 4 KB
VERBOSE: Used space = 63.18 GB
VERBOSE: Free space = 21.29 GB
VERBOSE:
Fragmentation:
VERBOSE: Total fragmented space = 4%
VERBOSE: Average fragments per file = 1.23
VERBOSE: Movable files and folders = 153593
VERBOSE: Unmovable files and folders = 6
VERBOSE:
Files:
VERBOSE: Fragmented files = 2745
VERBOSE: Total file fragments = 35394
VERBOSE:
Folders:
VERBOSE: Total folders = 4819
VERBOSE: Fragmented folders = 2
VERBOSE: Total folder fragments = 2
VERBOSE:
Free space:
VERBOSE: Free space count = 74005
VERBOSE: Average free space size = 296.00 KB
VERBOSE: Largest free space size = 409.42 MB
VERBOSE:
Master File Table (MFT):
VERBOSE: MFT size = 308.00 MB
VERBOSE: MFT record count = 315391
VERBOSE: MFT usage = 100%
VERBOSE: Total MFT fragments = 4
VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
VERBOSE:
You do not need to defragment this volume.

Installing CS4 on new macbook pro gives me error

Hello
I tried to install CS4 again on my new macbook pro and it gives me errors.
On my screen is: "AdobeColorCommonSetRGB Error: Error 2."
and i have no clue how to fix it.
I hope someone can help me here..

Installer freezes on Checking system profile
Mylenium

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

The trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser.

Every time I download a new app or update an old one it doesn't work. It gives an error message saying it is unable to download the application. I have 2 choices. Retry or done. Retry doesn't work so I press done. What can I do to fix this?

Every time I download a new app or update an old one it doesn't work. It gives an error message saying it is unable to download the application. I have 2 choices. Retry or done. Retry doesn't work so I press done. What can I do to fix this? Someone please help!

Try using Google's DNS instead of the one your IPS is providing.
- To change on the iPod go to Settings>wifi and change the DNS to 8.8.8.8
- For the computer see:
Public DNS — Google Developers
- Did anything happen to your router right before this started? Maybe the router is blocking the port used.

Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have

Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have?

Hello, hanliefromzaf.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H.

Iphone has a new battery and front camera flex cable. Wont turn on and Itunes gives me error 4014 when i try to restore

So my iphone 5 was having very bad battery problems and apple said they charged $80 to which i was astonished by because my warrenty ended 2 weeks eailer. I thought maybe they would be generous and help me out but no so i took it upon myself to get a new battery and install it myself. I did that and it turns out i need a new front camera flex ribbon so i also bought that and installed it myself. Whe i was donre installing it my phone flashed the apple logo and went black front there. I tried connecting to itunes and it gives me error 4014. Will apple still fix my phone even though i opened it?(Im not under the warrenty anymore).

It is unfortunate that you chose to open the device. Apple will not touch it now. Out of Warranty replacement is no longer an option.
Buy a new device.

The new iTUNE GIVE ME ERROR R6034 AND ERROR 7 (WINDOWS EXE ERROR 1114)

the new iTUNE give me error c:\program files(x86) itunes\itunes.exe r6034, and Error 7(windows error 1114)

Hello ROMANCERO,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Best of luck,
Mario

This line give me error Map fillParams = new HashMap(); for calling ireport

hi master
sir i flow this link step by step
http://developers.sun.com/jscreator/learning/tutorials/2/reports.html
when i us this step
Double-click the View Report button to display the Java source for the viewReportBtn_action method.
Add the following code shown in bold to the body of the viewReportBtn_action method.
Code Sample 5: viewReportBtn_action Method
public String viewReportBtn_action() {
// Free up the rowset resources
tripDataProvider.close();
then this line give me error
Map fillParams = new HashMap();
in out put windows give me this error
C:\Documents and Settings\Administrator\My Documents\Creator\Projects\TravelReport\src\travelreport\Page1.java:383: cannot find symbol
symbol : class Map
location: class travelreport.Page1
Map fillParams = new HashMap();
please give me error how solve this error
thank's
aamir

Complete step 17 (2 steps after you paste the code)
17. Right-click in the source and choose Fix Imports from the pop-up menu.
I suggest that you complete the following 2 tutorials before you try to do the advanced ones.
http://developers.sun.com/jscreator/learning/tutorials/2/jscintro.html
http://developers.sun.com/jscreator/learning/tutorials/2/helloweb.html

HT1222 When I am download the new update IOS 6.0.1 it's give me error that download is falid

When i am download the new update IOS 6.0.1 it's give me error that download is falid

Are you on WiFi? Try connecting your iPhone to your computer and updating through iTunes.

New Error : Optimize-Volumes -SlabConsolidate gives "ObjectNotFound" error after Enumeration

Similar Messages

Maybe you are looking for