Maintaining multiple cubes in an AW

How can I concurrently maintain multiple cubes in an AW? In a session, I can only attach one AW and start maintaining one Cube, hence, cannot attach it again for maintaining another Cube in another session.
Regards, Anirban

AWM attaches AWs in 'read write' mode, so you cannot open a second AWM and attach the same AW. But all is not lost.
Option 1: Select two cubes in AWM and then choose parallelism >= 2
If neither of your cubes is partitioned, then they should be built in parallel. If your cubes are partitioned, then the server will build all the partitions of cube 1 first, but should start working on the partitions of cube 2 as soon as there are free processes, so they should overlap. Note that this will not happen if there is any dependency between the cubes. The USER_DEPENDENCIES view should tell you if this is true.
Option 2: (11.2 only) Start the builds using DBMS_CUBE.BUILD
Wherever possible the server (11.2) will attempt to build the cube in 'multi-writer' mode instead of in 'read write' mode. This means you could run build two cubes in parallel from different SQL sessions. This will only happen for cube-only builds -- dimension builds always require 'read write' mode.

Similar Messages

  • Is it possible to maintain multiple payment formats with a single Program

    Hi,
    Is it possible to maintain multiple payment formats with in a single program.
    For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
    When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
    if its possible could you please tel us where to define the parameters in Setups.
    Many thanks,
    Zaheer S

    nazzu wrote:
    Hi,
    Is it possible to maintain multiple payment formats with in a single program.
    For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
    When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
    if its possible could you please tel us where to define the parameters in Setups.
    Many thanks,
    Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

  • Is it possible to maintain multiple pymt  frmts with in a single prgm 11i

    Hi,
    Is it possible to maintain multiple payment formats with in a single program in 11i
    For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
    When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
    if its possible could you please tel us where to define the parameters in Setups.
    Many thanks,
    Zaheer S

    nazzu wrote:
    Hi,
    Is it possible to maintain multiple payment formats with in a single program.
    For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
    When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
    if its possible could you please tel us where to define the parameters in Setups.
    Many thanks,
    Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

  • Bad request deletion at a time from multiple cubes?

    How do we delete a bad request or reconstruct from cube at a time which is loading from single info source to multiple cubes?

    hi Bharath,
    try these links.
    http://help.sap.com/saphelp_nw04s/helpdata/en/ca/5c7b3cbd556915e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/espackages/maintenance%2brequest
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65a8e07211d2acb80000e829fbfe/frameset.htm
    hope it helps.

  • How can I maintain multiple white spaces in a PDF written from InDesign?

    I need to have 2 white spaces maintained (within a part #) in the PDF I write, but when I open in Acrobat it converts it to one space.
    I've tried word spaces, set spaces and applying "no color" to a placeholder character and nothing is working!
    Any ideas or suggestions?

    I am talking about normal white space. Multiple fixed widt spaces are not a problem. How the space is handled in a PDF depends on how it is created.
    Viele Grüße
    Wilhelm Georg Adelberger
    Von meinem iPhone gesendet
    Am 21.08.2014 um 12:01 schrieb Peter Spier <[email protected]>:
    How can I maintain multiple white spaces in a PDF written from InDesign?
    created by Peter Spier in InDesign - View the full discussion
    It may not be a great idea to use multiple spaces, but it certainly is not prohibited and sometimes is necessary -- you might want a 2em space, or a thin space before and after a tab you underline in a form.
    I'm able to select the multiple spaces just fine in Acrobat 9 using the text touch-up tool.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6661037#6661037
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in InDesign by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Best Practice in maintaining multiple apps and user logins

    Hi,
    My company is just starting to use APEX, and none of us (the developers) have worked on this before either. It is greatly appreciated if we can get some help here.
    We have developed quite a few applications in the same workspace. Now, we are going to setup UAT and PRD environments and also trying to understand what the best practice is to maintain multiple apps and user logins.
    Many of you have already worked on APEX environment for sometime, can you please provide some input?
    Should we create multiple apps(projects) for one department or should we create one app for one department?
    Currently we have created multiple apps for one department, but, we are not sure if a user can login once and be able to access to all the authenticated apps.
    Thank you,
    LC

    LC,
    I am not sure how much of this applies to your situation - but I will share what I have done.
    I built a single 700+ page application for my department - other areas create separate smaller applications.
    The approach I chose is flexible enough to accomdate both.
    I built a separate access control application(Control) in its own schema.
    We use database authenication fo this app - an oracle account is required.
    We prefer to use LDAP for authentication for the user applications.
    For users that LDAP is not option - an encrypted password is stored - reset via email.
    We use position based security - priviliges are based on job functions.
    We have applications, appilcations have roles , roles have access to components(tabs,buttons,unmasked card numbers,etc.)
    We have positions that are granted application roles - they inherit access to the role components.
    Users have a name, a login, a position, and a site.
    We have users on both the East Coast and the West Coast, we use the site in a sys_context
    and views to emulate VPD. We also use the role components,sys_contexts and views to mask/unmask
    card numbers without rewriting the dependent objects(querys,reports,views,etc.)
    The position based security has worked well, when someone moves,
    we change the position they are assigned to and they immediately have the privileges they need.
    If you are interested I can rpovide more detail.
    Bill

  • Maintaining Multiple Vendor Phone Fax and Email using IDOC

    Hello Guru's,
    I have a requirement where I must be able to maintain multiple phone and fax entries for all of our vendors.  Is there a standard segment in IDOC CREMAS05 that will allow for this maintenance?  Or will I have to use a separate BAPI / FM?  I think there must be a standard way for doing this.
    As of now it appears the CREMAS05 IDOC only supports the ability to maintain one phone/fax or email address at a time, which is in the LFA1 table, and not at the address table level (ADR2, ADRC, ADRT, etc.).
    This is for an R/3 System running on EHP5.
    Thanks,
    Kohl Kemp
    Edited by: Kohl Kemp on Jul 14, 2011 3:16 PM

    I've never done this natively in CUC.  Here's a guide that covers how to do it with the Fax server integration if that helps:
    http://docwiki.cisco.com/wiki/Configuring_Fax_Detection_%28Single-Number_Voice_and_Fax%29_with_Cisco_Unity_Connection

  • How can we maintain multiple payment terms for a customer

    how can we maintain multiple payment terms for a customer?

    Hi,
    You can leave the Payment terms field in the sales area data tab blank. and you can enter the payment terms at line item level while creating the sales order. By that you will achieve multiple payment terms for the same customer in the same sales order. but the invoice will be split by standard SAP based on the payment terms.
    Also difference between the "Payment Terms" field in Company code tab and the sales Area tab is.
    Company code tab payment terms are used only for the documents that are posted directly in FI module. for example credit and debit memos posted directly in FI and as a leading practice this should always be "payable Immidiately"
    Sales area Tab payment terms are the one which are copied on to the sales order header data which are valid for all the line items unless you specifically mention different payment terms at line item level.
    Regards,
    Shantanu

  • Jumpstart/JET - How to maintain multiple versions of patch clusters

    Is there a way to maintain multiple versions of the recommended patch cluster with JET? Since Sun uses the same filename (10_recommended.zip) but releases several versions over time, its hard to keep new systems at the same baselines as ones built previously. So when I download a patch bundle I always rename it to the date downloaded (ie 10_Recommened_10SEPT2010.zip) Is there a way to integrate this into JET?
    Thx,

    when you are talking about versioing , starting form XI 3.1 SAP business objects released the BusinessObjects LifeCycle Manager for XI 3.1
    find more details here
    http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_User_en.pdf
    good luck
    Amr

  • Maintain multiple address for vendor

    User purchase article from vendor A at addess#1 but returned article back to vendor A via address#2. Vendor has 2 different departments handling delivery and returns.
    How can I configure 2 adddress for the same vendor code?
    If I had to used a partner function, what suggested partner function should I used?
    My PO order entry currently only accept vendor code.
    Suppose I need to add in a partner, like sold-to and ship-to in SD, is there a way to configure the screen?
    Where do I do it.
    Thanks
    bye

    Hi Colin,
    What is the bussiness reason for multiple addresses for the same vendor?
    If the vendor maintains several different physical locations at different addresses, then they should be created as different vendor master records. Then, if they all use the same payment office, they can be partnered to the same invoicing vendor.
    If you need to add a seperate address for the supplier location, payment location, billing location, etc, then you must create each of them using the correct account group and use partnering to tie them all together.
    Also, there is a way to maintain multiple addresses for the same vendor - but this is used for maintaining different international versions of the same address. (See the international button) - which requires some configuration in central address management.
    Or,
    Go for one-time-vendor concept else it is not possible .
    Also,
    Partner function can be used to maintain different address.
    This is the advantage of keeping the partner function in vendor account groups.
    You create different vendor codes for different addresses and assign the same.
    Regards,
    Rahul.

  • Multiple Cubes refresh in parallel

    Hi
    I have an analytical workspace where i have modelled a set of conformed dimensions and some dimensions specific to specific subject areas. There will be multiple cubes (Partitioned and some non partitioned) in this analytical workspace.
    Would like to know if these cubes can be refreshed in parallel. I have tried using DBMS_CUBE provided parallelism parameter and kicked off 2 cubes refresh but when i check the cube_build_log, the slave process is always 0 and the execution seems to have happened in serial.
    Please suggest how these cubes can be refreshed in parallel.
    Thanks

    FAILED RECORDS FROM THE LOG :
    ==========================
    127     0     FAILED     BUILD          BUILD     "(CLOB) <ERROR>
    <![CDATA[
    XOQ-01707: Oracle job "IncrMyCBMV_JOB$_812" failed while executing slave build "GLOBAL.UNITS_CUBE USING (CLEAR LEAVES, LOAD, SOLVE) AS OF SCN 1533406" with error "37162: ORA-37162: OLAP error
    XOQ-00703: error executing OLAP DML command "(UPDATE GLOBAL.GLOBAL : ORA-37605: error during OLAP AW UPDATE
    ORA-00600: internal error code, arguments: [kdliLockBlock], [9708], [16859386], [0], [0], [0], [0], [], [], [], [], []
    ORA-06512: at "SYS.DBMS_CUBE", line 234
    ORA-06512: at "SYS.DBMS_CUBE", line 316
    ORA-06512: at line 1
    ".]]>>
    </ERROR>"     GLOBAL     GLOBAL               02-APR-13 12.25.43.702000000 PM ASIA/CALCUTTA     (CLOB) BUILD price_cube, units_cube     DBMS_CUBE     0               4542     0     0     2     IncrMyCBMV
    127     0     FAILED     SLAVE     UNITS_CUBE     CUBE          GLOBAL     GLOBAL     P22:1999.10     IncrMyCBMV_JOB$_821     02-APR-13 12.25.42.673000000 PM ASIA/CALCUTTA     (CLOB) GLOBAL.UNITS_CUBE USING (CLEAR LEAVES, LOAD, SOLVE) AS OF SCN 1533406     DBMS_CUBE     1          S     6288     230     0     3     IncrMyCBMV
    127     0     FAILED     SLAVE     UNITS_CUBE     CUBE          GLOBAL     GLOBAL     P24:1999.12     IncrMyCBMV_JOB$_819     02-APR-13 12.25.32.533000000 PM ASIA/CALCUTTA     (CLOB) GLOBAL.UNITS_CUBE USING (CLEAR LEAVES, LOAD, SOLVE) AS OF SCN 1533406     DBMS_CUBE     1          S     6272     228     0     3     IncrMyCBMV
    127     0     FAILED     SLAVE     UNITS_CUBE     CUBE          GLOBAL     GLOBAL     P25:2000.01     IncrMyCBMV_JOB$_818     02-APR-13 12.25.30.505000000 PM ASIA/CALCUTTA     (CLOB) GLOBAL.UNITS_CUBE USING (CLEAR LEAVES, LOAD, SOLVE) AS OF SCN 1533406     DBMS_CUBE     1          S     6259     227     0     3     IncrMyCBMV
    127     0     FAILED     SLAVE     UNITS_CUBE     CUBE          GLOBAL     GLOBAL     P26:2000.02     IncrMyCBMV_JOB$_817     02-APR-13 12.25.28.477000000 PM ASIA/CALCUTTA     (CLOB) GLOBAL.UNITS_CUBE USING (CLEAR LEAVES, LOAD, SOLVE) AS OF SCN 1533406     DBMS_CUBE     1          S     6258     226     0     3     IncrMyCBMV
    127     0     FAILED     SLAVE     UNITS_CUBE     CUBE          GLOBAL     GLOBAL     P27:2000.03     IncrMyCBMV_JOB$_816     02-APR-13 12.25.26.449000000 PM ASIA/CALCUTTA     (CLOB) GLOBAL.UNITS_CUBE USING (CLEAR LEAVES, LOAD, SOLVE) AS OF SCN 1533406     DBMS_CUBE     1          S     6237     225     0     3     IncrMyCBMV
    127     0     FAILED     SLAVE     UNITS_CUBE     CUBE          GLOBAL     GLOBAL     P28:2000.04     IncrMyCBMV_JOB$_815     02-APR-13 12.25.24.421000000 PM ASIA/CALCUTTA     (CLOB) GLOBAL.UNITS_CUBE USING (CLEAR LEAVES, LOAD, SOLVE) AS OF SCN 1533406     DBMS_CUBE     1          S     6235     224     0     3     IncrMyCBMV
    127     0     FAILED     SLAVE     UNITS_CUBE     CUBE          GLOBAL     GLOBAL     P29:2000.05     IncrMyCBMV_JOB$_814     02-APR-13 12.25.22.393000000 PM ASIA/CALCUTTA     (CLOB) GLOBAL.UNITS_CUBE USING (CLEAR LEAVES, LOAD, SOLVE) AS OF SCN 1533406     DBMS_CUBE     1          S     6234     223     0     3     IncrMyCBMV
    127     0     FAILED     SLAVE     UNITS_CUBE     CUBE          GLOBAL     GLOBAL     P30:2000.06     IncrMyCBMV_JOB$_813     02-APR-13 12.25.20.349000000 PM ASIA/CALCUTTA     (CLOB) GLOBAL.UNITS_CUBE USING (CLEAR LEAVES, LOAD, SOLVE) AS OF SCN 1533406     DBMS_CUBE     1          S     6232     222     0     3     IncrMyCBMV

  • Maintaining multiple ship to party address in SD

    Hi Guys,
    Could you please let me know, how we can maintain multiple ship to party address for a customer?
    Thanks,
    Kam.

    hi,
    this is to inform you that,
    you can create another SH against 0002 - or yours and create a multiple address for SH.
    then assign the SH number to original customer then this will reflect as two SH's one for the original customer and second is created SH in sales order you will get a POP up screen you can select manually there.
    or
    you can use contacts person address tab page for alternate address of SH if you dont want to trigger another SH and this is use ful for only address maintaince.
    if you can come to a confirmation that you are not using contacts person tab page for any other purpose.  then you can use it
    regards,
    balajia

  • How to maintain Multiple Substitution (2003) Infotype

    Folks,
    I need to maintain multiple substitution for an employee on same date.
    _Example:_
        Employee planned working time ( Infotype 0007 ) - Shift A ( 6 AM to 2 PM )
        But he has come in Substitution Shift B ( 2 PM to 10 PM ) instead of Shift A.
        Due to month end work , his senior manager may say him to continue Shift C also.
        ( It happens in Manufacturing industries )
       Now i need to maintain both Shift substitution in 2003 infotype.
       But system doesn't allows me to enter two Substituion for same date.
       Is there any solution for . If Yes , say me procedure.
       Answers will be rewarded.
    Regards
    Surendar

    No No, I am just asking you to make a decision based on your requiremnts and how your system is set up.
    Entering a DWS OR star time and end time in IT 2003 will replace the planned working time in IT 0007. (Dont enter both at the same time)
    So if you maintain the following times 0600 to 2200 in IT 2003, then the employee has a planned working time for 16 hrs, he does not get any benefit for working 8 extra hours. Is this the way you want system to work?
    Normally under such circumstance, the employee will get compensated in some way for working extra hours. If this is how system should work, you should only enter 0600-1400 ( or whatever SHIFT B timing is ) in IT 2003 and enter the extra shift (Shift C) worked as Overtime.
    I hope the above clarifies my answer.
    Please note that wiothout knowing exactly how your system is set up, we cannot give you an exact answer through the internet, We can give pointers and guidelines, which you need to analyse yourself in light of your own system design. If you have any doubt, enter the data in test system and try it out and see if the payment is made correctly as expected,.

  • Creating a universe on Multiple Cubes or Bex Queries

    Dear SDNers,
    Can we create a single universe on Multiple cubes or DSOs or BEx Queries and how do we do this?
    Can you plese tell me step by step.
    Thanks,
    Swathi.

    Hi swathi,
    yes, we can create multicubes from single universe from webi rich client/deski, create a single report  from BEx Query it makes as single micro cube.
    and Next Edit Query--> Add Query--> select same universe.  This Query makes as another Micro cube.   so you can design a report from those Microcubes. if you add additional object to query panal the microcube updated from data base.
    This Link help for you,
    [http://reports.is.ed.ac.uk/areas/itservices/busintel/TrainingMaterials/advUser/Lesson6-Step1.html]
    Thanking you,
    Praveen

  • Multiple cubes questions

    Dear BW expert,
    I have question about Multiple Cubes. What is the advantage and disadvantage to use multiple cubes for reporting performance?
    I have following scenarios:
    Cube2005, Cube2006, ...... Cube2xxx. (total growing )
    Vs.
    Cube1, ..... Cube12 (Total 12 cubes)- Based on Fiscal period. If I use this model, how about I want a report for a special year, so in this case I have to access 12 cubes every time. If I build multiprovider on top of this for each year, is that possible?
    Pros &  cons?
    Any suggestions is greatly appreciated and points awarded!
    Weidong

    Hi there,
    Thanks for your reply!
    My case is that we have a huge volume of data for each year, so we decided to build cube per year, but we have to create a lot of cubes in advance and make the maintenance work harder. Then we come up with the idea by using cube per fiscal period/month, so we have fix number of cubes(12), and on top of the 12 cubes, we build multiprovider per year, and then multiprovider on top of the multipovider per year - is that possible?
    The main reason is to keep the data size for each cube/ODS small. Anyone has such experience with a large data size cube?
    Any comments? Thanks in advance!
    Weidong

Maybe you are looking for

  • How to get the output format options of SAP QUERY

    Hi Gurus, I want to get the output options available for sapquery program.means when you execute the program "AQZZ/SAPQUERY/FDF1============" you will get output options like sap alv,display as table,wordprocessing  etc. i am not able to unsderstand

  • What's the best way to report a fault?

    How exactly do you report it? Is there a particular method or should I just send them an email or, something? I've found for instance on BT.com a link to "diagnostics.bt.com" that claims it'll solve my connectivity issues but when I try and use it, i

  • Common Distribution Channel in CRM

    Hi Guys,     In our system R3, there has defined common distribution channel. How can I transfer the customizing of it to CRM, or How can I define the Common Distribution Channel? Thanks, Carol

  • Kinect for Windows V2 Device cannot start

    I was able to use my Kinect for Windows V2 sensor yesterday with all of the applications in the SDK browser but the next day after restarting my computer I was no longer able to use the device. Looking at the device manager I get this message under t

  • Can I Make 2 Remote Calls at the Same Time?

    Hi, Can I make 2 remote calls at the same time? For example, if I have the following remote objects: <mx:RemoteObject id="myRemote" destination="zend" source="MyData" showBusyCursor="true" fault="faultListener(event)">      <mx:method name="getData"