New Field Addition in Structure KOMP
*Hi,
We have requirement of having Material Description field in the Allowed Field Catalogs in order to fetch the same from Pricing Condition Table. Hence, as a first step, have added the MAKTX field inside the ZStructure inside Main Structure KOMP and activated the same. Then i have added the same field in Allowed Field Catologs of Pricing.
Now i have tried to create a new Pricing Condition Table with field catalog of Material Description (the added field), but there is no such field is available for selection.
Is there anything i missed to do, so that the newly added field is available during New Condition Table Creation with key combination of the added field.
Appreciate your prompt response on this.*
Rgds,
Hi Ravi,
Please check the following thread;
Re: Pricing - Adding new field to pricing catalog
also the following link
http://www.sap-img.com/sap-sd/how-to-create-field-in-komp-komp.htm
Hope this will help
Regards
Chandra
Similar Messages
-
How to fill a new field in communication structure KOMPAZD
Hi,
I have added a new field ZKNRZE to structure KOMPAZD. It should be filled with the partner payer (KOMK-KNRZE) How can I fill this field? Which user-exit do I have to use?
Thanks and regards.Hi Carmen Alvarez,
You should use the USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ) to move the value.
Thanks,
Mariano. -
New Field Addition in Allowed Field Catalogs -Pricing.
*Hi,
We have requirement of having Material Description field in the Allowed Field Catalogs in SPRO --> SD --> Basic Functions --> Pricing --> Pricing Controls --> Define Condition tables --> Allowed Field Catalogs in order to fetch the same for Pricing Condition Table creation with Mtrl Description as Key Combination.
Hence, as a first step, have added the MAKTX field inside the "ZStructure" (which was created before) inside Main Structure KOMP and activated the same. Then i have added the same field MAKTX in Allowed Field Catologs of Pricing using New Entries.
Now i have tried to create a new Pricing Condition Table with field catalog of Material Description (the added field), but there is no such field is available for selection.
Is there anything i missed to do, so that the newly added field is available during New Condition Table Creation with key combination of the added field.
Appreciate your promot response.*
Rgds,Hi,
Thanks for your response.
Have added the required field in Structure KOMG now and it is available for selection in Condition Table Field Catalogs. However, am allowed to select this field only when creating a New Condition Table and if i want to add this field in the already created condition table in change mode, it thows an error message - "Function Code cannot be selected".
How to proceed further.
Rgds, -
Adding a new field to existing structure
HI all
I am adding a new field to the existing structure in BW ,shall I remove all the data in the cube to fill fill this field for the previous records and reload again or any other solution
thanks in advanceHi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas -
EEWB - In BP, adding a new field regenerates append structure
Hello,
After adding or deleting a field using EEWB, I have the following issues -
1. The new append structure that was created for BUT000 gets regenerated
2. Field labels get overwritten by field names
3. The order in which the fields were seen on the screen gets altered
Is this a known behavior of EEWB? How to alleviate this?
Thanks!Thanks for your input Satish!
I searched using the application component suggested and the keyword and it was not very useful.
Some more details -
I created some new fields using EEWB. When you go to transaction BP, the standard tabs are displayed - ex - address, bank data, notes, etc. But now there is a new tab - Customer Data that has my custom fields on it.
In the backend, SAP has created an extend structure for table BUT000 that has these fields in it.
When I go to this extend structure, my fields are there with a ZZ prefix - Ex: ZZFIELD1, ZZFIELD2, etc. If you go to the details of these fields in data dict - transaction SE11, the Field labels - Short, Medium, Long and Heading are the same as the field names. Ex: in the first case, the four field labels will be - ZZFIELD1. I then changed the field labels to something meaningful - Ex: Renter name and rental date. After generating the structure, these labels are then displayed on the Customer data tab. So far so good.
However if I add a new field - ZZFIELD3, then all the label names that I had given (Ex: Renter name and rental date) get erased and replaced by the fieldnames again.
Also the order in which the fields were diplayed gets altered. Ex: earlier the Customer data screen was showing - ZZFIELD1, ZZFIELD2. Now it shows - ZZFIELD3, ZZFIELD2, ZZFIELD1.
I hope I have explained this issue. -
Adding a new field in extract structure
Want to include New field in the Extract Structure in the Standard Extractor.
Please let me know what are the steps are needed to bring the data for that field in the cube level.
Thanks
TajHi ,
if the data soource is belongs to LO extraction
Option 1- Enhance in LBWE
1. check in LBWE- Maintenance -> check if your required field is available in pool (right hand side).
2. If it is available then send it to left hand side.
3. Save and you will find the new field as part of your extract structure.
4. In LBWE go to datasource maintenance and uncheck the Hide check box for newly added fields and Save the data source.
5. No need to write user exit code for these fields.
after this replicate the data source
and activate the transfer rules using RS_TRANSTRU_ACTIVATE_ALL
Hope you are clear now!!!!!!!!
Cheers,
swapna.G -
New fields addition to BW 3.5 version ODS and Cube and transport to PRD.
Hi,
We have a scenarion on 3.5 wherein there is a enhancement to ODS and Cube(few new fileds are added), this New ODS also feeds data to Cube. Since we do not had data on Quality system, we had no problem in adding fields to ODS and cube, but now we need transport these changes to Production, In production ODS and Cube has large data. we have few doubts.
1. Shall we need to delete data from ODS and Cube then Transport request to Production server.
2. Is it ok to move transport request without deleting data in ODS and Subsequent Cube in production system
Guys and Gals,
what is your suggestion on this one. WE are in BW 3.5 only. No BI7.
Please revert back.Hi
you can directly transport that to production.
the image will over write with the existing one and for the new object add , a new table space will be created.
it will not affect the Old data
But in the Cube even if the data is there there is a concept called remodeling
http://help.sap.com/saphelp_nw70/helpdata/en/58/85e5414f070640e10000000a1550b0/content.htm
hope this helps
santosh -
Add new fields in additional information
Hi experts!!
Does anybody tell me if is possilbe to add new clients filds in additional information about an expense receipt and how??
Thank you very much in advance!!Hi,
If you need to add a field you need to add this in the structure PTK03 in SE11, you can add your custom field below the entries but take note once SAP deliver a new field in this structure, you need to adjust again your field as this will create an inconsistency in your system.
Regards,
Raynard -
I have added a new field in IT0006 ,Now when try to create a new record for
Hi Experts,
I have added a new field in IT0006 ,Now when try to create a new record for a employee.
1,If I give the SUBTY in the PA30 screen getting an error "Don't Specify a subty error"
if and remove the subty and press CREATE button popup's comes and list the subty values.......It was allowing me to enter the subty in the PA30 screen prior to my new field addition in IT0006... is't a problem with the new field addition?
2, After I choose the subty value from the pop-up I am able to see the next screen....BUT GETTING AN INFORMATION MESSAGE THAT "Assignment to feature P0006 did not take place"?
3,, In the next screen after I have passed all mandatory fields while attempting SAVE I am getting an error called " Time constraint table in T777D is incorrect" what could be the cause?How are u adding fields to table using append in se11 or pm01.
if you are adding fields using se11 delete it and add it0005 in transaction pm01 and generate object.
add fields to structure CI_XX_R0005 and generate screen and maintain entry and screen in maintance view add entry and activate program. -
Adding new field to product allocation catalog?
We are configuring product allocations in SCM 7.0 and have a requirement to add a new field to the standard field catalog for the allocations check. We have followed the procedure outlined by SAP to add our new field to the structure /SAPAPO/KOMGOZ, add the field to the field catalog, and copied the source code to ERP.
The issue that we are having is that new custom field that we added to the field catalog is not being populated when we execute /SAPAPO/ATPQ_PAREA_K - Characteristics Combinations from Planning Area. The product allocations group that is being used in /SAPAPO/ATPQ_PAREA_K has three characteristics. The first two which are SAP provided fields are being populated correctly, but the last custom field we added to the field catalog is not. It is just blank.
Is there a step that we missed during the configuation. We are only using this field for the product allocations check (we do not use Rules Based ATP).Hi Arnel,
I was expecting with examples but anyway.
consider the examples of your CVC
Country Region brand SO DV DC mat plant etc...
now you want to first get confirmation on SO and DV , Prd allo group with these 2 characteristics
same goes for all other combinations.
now if you want to go with Either Or /And.. decides if you need to go with one product allocation procedure with many prod allocation group /or/ a sequence product allocation procedure.
Its very straight forward as such... if you come up with examples, i can give better details.
Looking at point 3 it looks like you want to go with 'OR' so you will have to go with sequence.
(tcode: /SAPAPO/ATPCQ_GENER)- is to check the customizing, sometime you might move the Prod allocation from dev system and just to make sure there is no issue in transport /missing config.. it will check with transaction code. I don't think you have to run this every time. After every transport..may be you have too as a caution check.
Imp: just to check @ different levels i dont think you will have to create different planning area. If all the characteristics on which you want to (combinations) is available in one planning area , you should be good with one planning area only.
Hope this is helpful. I would suggest to follow what we have discussed so far and then you can create another message after the configuration/approach you finalized with new issues/concerns you will be facing.
If issue are really bothering you much, you can reach out to me directly. Let me know
Pravin M -
Adding a new field to VA05 Report output
Hi All,
Please suggest what's the best method to add the new field in the report output of VA05 this can be done in 2 ways one way is by writing the code in theUser exit PERFORM MOVE_USERFIELDS or copy the whole program to Zprogram and write the Code?Ist one need access key but the the other method is not required.
Please suggest me the best method
Thanks&Regards
MaheshHi Mahesh,
i'm in the process of making a similar change,
copying to a ZPROGRAM is not so difficult, but as i told you you have to add your new field to VBMTV structure, and copy the includes that you need to change,
P.S. Note, when you copy you have to change some SELECT statements where
it's selecting from T180V table based on sy-repid, you hav to change sy-repid to SAPMV75A, as there's some configuration done for this.
Regards,
Raghavendra -
HI everybody
i have to add a new field to the structure of a z table, i wanted to know if data would become inconsistent when changing the structure of the table?Hi anjali,
You can add the fields to the structure of ztabel in Tcode SE11, where as to make the existing data consistent we have to activate the table in SE14.
SE14 is to adject the tabel.
Regards
Satya.
Message was edited by: Satyanarayana Sayana -
How to add new fields in CRMD_CUSTOMER_H in CRM 3.0 ?
Hi,
I I have a requirement in CRM 3.0 to add a new field to crm structure CUSTOMER_H but not sure how to do this. I know in 7.0 we have transaction EEWB to do this but in 3.0 i have no clue. Please help how to do this. Thanks in advance!
Regards,
BhanuMoved this over to CRM General & Framework.
Firstoff technically SAP CRM 3.0 is not even supported in general maintenance by SAP. However for memory lane, extensions in CRM 3.0 must be coded manually. EEWB did not exist until CRM 4.0. In general there should be a CI include in CRMD_CUSTOMER_H where you would put your fields. The drawback is that you need to extend the BDOC structures and write the exits to populate/receive the fields on the inbound outbound bdocs manually along with the transfer to BW.
BTW since it is CRM 3.0 you probably have bigger problems than this, but that's just my opinion.
Wow this makes things feel like 2002/2003 all over again for me.
Take care,
Stephen -
F4 help for a customer defined field added as structure enhancement
I am trying to get the F4 help on a customer defined field added as structure enhancement. This can be achieved by programming the "F4IF_INT_TABLE_VALUE_REQUEST" (as I have data in an internal table) in the Process On Value-Request event. The problem is because it is a customer field addition as structure enhancement. I am not sure where I should put this code segment to make it work. Any help would be highly appreciated.
Could you create a search help and attach that to the data element of your field, and then populate the data using code in the function exit of your search help if it cannot be directly read from a table or view?
This would remove your code from the SAP dialog program. The only mod you may need to make is to add / flag the search help on the screen field.
Andrew -
The New Field in the FBL5N/FBL1N doesn't appear
Hi guys,
I created an APPEND STRUCTURE with the NAME1 field in the table RFPOS and through the transaction FIBF an Event that calls a Function and move the Name of Customer or Supplier according to the transactions FBL5N or FBL1N.
This field, NAME1, should appear in these transactions when the user choices the hidden fields through the Change Layout button. But this field doesn't appear...
I debbuged the Function Module and the data have been moved. (It works...)
Please, someone did it before and could help me to solve it?
Why doesn't the Field NAME1 appear? What could I do??
Thanks a lot!
Regards,
Marcos Fernando DottaHi
The new fields have to be appended in the structure RFPOSX too, and then you need to run the program RFPOSXEXTEND in order to add the new fields in layout structure RFPOSXEXT
Max
Maybe you are looking for
-
Adobe Application Manager crashes
Application Manager crashes each time I try to update or download to install. I have tried Adobe Creative Suite Cleaner Tool & reinstalling AAM. System is 10.6.8. Have previously had no issues & have downloaded 5 programs & updates. I believe I have
-
Excel export defaults to ".txt"
Hi Forum, I have a question regarding the "Excel" export button on SAP B1. Whrn i try to export data clicking the excel button, the window "Save As" defaults to ".txt" extension.... is there a place to change the default to make it ".xls" instead???
-
Relation table between Opportunity and Activity.
Can any one help me to know,In which table relationships are maintained between Opportunity,Activity,Account etc
-
Differences between standard C++ and Visual C++
I'm a C++ programmer who just started using Visual C++. Unfortunately, Visual C++ is different from regular C++ - for example, in C++ we use cout<<"hi"<<endl to print a string, but there's no such option in Visual C++. What I'd like to know is what
-
IPhoto album uploaded to Gallery-downloaded files revert to camera names
I have created an album in iPhoto 8.1 and uploaded it with full size photos to .me Gallery for relatives to view and download. I renamed the photos in iPhoto and those names appear fine in Gallery. But when people download the photos, the name revert