New field does not reflect in Table control

Dear Experts,
There is a requirement to add a new field in a table and gets it displayed in already created table control (with wizard). I have added a new field, I can see that in the final internal table (debugger). But the field is not getting reflected in the table control. Why? Should I delete the whole table control and create again (which I do not want to do) or is there any other way?
As you can see in the below screenshot that there is already enough space but the last zzfield is not yet added.
Regards
Mani

Hi,
Either you use table control wizard and delete and create new table or try to understand how table control works and add the field on your own.
Open the screen layout. Press F6 or click on Dictionary/Program fields window. Type field name here. It should be work area field in which table data is loaded by looping on the table. Click on Get from program button. Your field will be listed there. Select the line and click on OK button. Place the field at appropriate location in the table. You can change the attributes of the field by clicking on the attribute window F2.
Thanks.
Devendra

Similar Messages

Newly added field does not show in table genarator.

Hi,
I have added one more field to my custom table.
When I make new entries in table maintanance, the new field does not show up.
Thank U for Ur time.
Cheers,
Sam

hai sam raj,
first activate your database table .
if any error occurs better you go to
se14(database utility) -
>give table name in object and select the table check box and click the edit push button.
and then click activate and adjust pushbutton.
surely you ll get some idea.
reward points if those idea helps.
thanks,
velu.

Vertical Scroll bar does not appear in table control

Hi ,
I have a table control with both vertical and horizontal scroll bars.
The data which comes is always more than 50 and the visible line size is 8.The vertical scroll bar
does not appear at times..but if i run the program again, it appears..
Sometimes it appears and sometimes no vertical scroll bar comes thought the data is more than the visible lines.
Any suggestions ? why is this happening?
Regards,
Sharadha

You have inserted data in the internal table and not "informed" the table control
In the PBO, use a statement like
DESCRIBE TABLE <itab> LINES <control>-lines.
Regards

What object it colud be? column/field does not exists in table but shows values?

Hi,
I have a typical problem. Where is this column comming from??
Below is the actual table column description where I don't have a field called "3rd_party_driver_home_phone"
But when I run the query as select 3rd_party_driver_home_phone from
additional_vehicle damage; it shows records with some value 3 for each of its row,
This field is acting like a regular column but when I try to drop that
column(Oracle 8.1.5) It says column doesn't exist.
why this problem is occuring?
Thanks,
Ramana
Table Description is as follows :
SQL> desc additional_vehicle_damage;
Name Null? Type
AD_VEH_ID NOT NULL NUMBER(38)
AD_ADJ_CLAIM_NU VARCHAR2(20)
AD_ADJ_FNAME VARCHAR2(40)
AD_ADJ_LNAME VARCHAR2(40)
PARTY3RD_DRIV_HOME_PHONE VARCHAR2(30)
null

APC,
Actually, Oracle objects can start with a number, but it's a really bad idea. When you create the object you just have to enclose it in double quotes, which also makes it case sensitive:
"3rd_party_driver_home_phone"
Your guess about the query sounds likely.
Ramana,
Did you figure it out yet? Was the query like APC suggested? If not, have you searched the user_objects table in the same manner as the user_synonyms table?
Barbara
null

Column/field does not exists in table but shows values?

Hi,
I have a typical problem. Where is this column comming from??
Below is the actual table column description where I don't have a field called "3rd_party_driver_home_phone"
But when I run the query as select 3rd_party_driver_home_phone from
additional_vehicle damage; it shows records with some value 3 for each of its row,
This field is acting like a regular column but when I try to drop that
column(Oracle 8.1.5) It says column doesn't exist.
why this problem is occuring?
Thanks,
Ramana
Table Description is as follows :
SQL> desc additional_vehicle_damage;
Name Null? Type
AD_VEH_ID NOT NULL NUMBER(38)
AD_ADJ_CLAIM_NU VARCHAR2(20)
AD_ADJ_FNAME VARCHAR2(40)
AD_ADJ_LNAME VARCHAR2(40)
PARTY3RD_DRIV_HOME_PHONE VARCHAR2(30)

APC,
Actually, Oracle objects can start with a number, but it's a really bad idea. When you create the object you just have to enclose it in double quotes, which also makes it case sensitive:
"3rd_party_driver_home_phone"
Your guess about the query sounds likely.
Ramana,
Did you figure it out yet? Was the query like APC suggested? If not, have you searched the user_objects table in the same manner as the user_synonyms table?
Barbara
null

New template field does not compute

I added a new template field in Address Book to hold custom data from another data base.
When I go to import the new data, the new field does not appear in the import wizard where you assign targets for imported data.
The 'stock' names offered in Card>Add Field do not match the wizard and even after I create a custom field in the Edit Template function, it doesn't show up as a target choice.
I thought about just using one offered then changing its name but they have masks, like phone number layouts. Any help?

Hi BW/BI Beginner:
1. Delete the data on your InfoCube.
2. Reactivate your Transfer Rules and InfoPackage.
3. Reload the data to your InfoCube.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 23, 2010 9:41 AM

Error in formula field: Column 'TASK_BCWP' does not belong to table Task

Hi,
We have a formula field to calculate the a cost KPI and that field throws an error in the ULS logs. The error is: PWA:PWA, ServiceApp:Project Server Service Application, User:GDFN\IPL_Content, PSI: SSP: Formula Evaluation Failed! - trying to continue - (System.ArgumentException:
Column 'TASK_BCWP' does not belong to table Task.
We are running EPM 2010. Recreating of the custom field did not work. We are not running with the latest CU yet.
The formula that we use is:
IIf([BCWP] > 0; [ACWP] / [BCWP]; 1)
The stack trace from the ULS log is:
PWA:http://gdfn-ipl-14/PWA, ServiceApp:Project Server Service Application, User:GDFN\IPL_Content, PSI: SSP: Formula Evaluation Failed! - trying to continue - (System.ArgumentException: Column 'TASK_BCWP' does not belong to table Task.
at System.Data.DataRow.GetDataColumn(String columnName)
at System.Data.DataRow.get_Item(String columnName)
at Microsoft.Office.Project.Server.BusinessLayer.FormulaDataProvider.HaveColumn(DataRow row, String columnName)
at Microsoft.Office.Project.Server.BusinessLayer.FormulaDataProvider.GetTaskData(Guid nodeId, Int32 fieldId)
at Microsoft.Office.Project.Server.BusinessLayer.FormulaDataProvider.GetDataInternal(Int32 entityId, Guid nodeId, Int32 fieldId, Boolean canChangeEntity)
at Microsoft.Office.Project.Server.BusinessLayer.FormulaDataProvider.GetData(Int32 entityId, Guid nodeId, Int32 fieldId)
at Microsoft.Office.Project.Server.BusinessLayer.Formula.FieldExpression.Evaluate(IFieldEvaluator context, Guid nodeId)
at Microsoft.Office.Project.Server.BusinessLayer.Formula.GreaterExpression.Evaluate(IFieldEvaluator context, Guid nodeId)
at Microsoft.Office.Project.Server.BusinessLayer.Formula.ConditionalExpression.Evaluate(IFieldEvaluator context, Guid nodeId)
at Microsoft.Office.Project.Server.BusinessLayer.Formula.FormulaEvaluator.Evaluate(PlatformContext context, Expression formula, Int32 entityId, Int32 fieldId, Guid nodeId, Dictionary`2 entityFormulaFields)) + -- FieldId = 188776525 -- NodeId = 1b1149c1-52c2-4f7f-ba60-6d65effdb6b3
-- Formula = IIf(Greater([MSPJ188743691], 0), Divide([MSPJ188743800], [MSPJ188743691]), 1)
I have no clue where to start looking for the cause of this error. Any help would be appreciated.
Thanks,
Quint Mouthaan

Hi Quint,
This can because of database fragmentation. I would recommend you to re-index the databases and perform a de-fragmentation and can check the behavior.
On the other hand when you receive this message, you can try an IISRESET and check. Additionally you can use refer to following link for de-fragmenting queries.
http://support.microsoft.com/kb/943345
Happy troubleshooting.
Vikram Daruru - MSFT

Command-Return in Toolbar Search field does not open new tab

Since the 3.1 update, pressing Command-Return in the Toolbar Google Search field does not open the search results in a new tab. Command-Return in the URL field still works properly.
Is anyone else having this issue and possibly a fix?

i'm guessing you're using inquisitor.

Field does not exists Error - INSTALLATION TABLE

We have applied ML MP9 on system database for our eRecruit Instance. We are getting a "Field does not exists" (for eg., INSTALLATION.GL) error for the components which refers to INSTALLATION table.
The error gets resolved if we introduce a .value in PeopleCode.
Note: Our Dev Instance is working fine which has ML MP9 applied on it.
Please find the PeopleBooks Comments for the .value Property:
Considerations Using INSTALLATION or OPTIONS Tables
When using the INSTALLATION or OPTIONS table, you cannot use the Value property. You must use the old style format, not the field object format. For example, the following code is invalid:
If %Page = Page.GP_RUN_TYPE And
INSTALLATION.TL.Value = "N" Then
&RS2.HideAllRows();
Thanks & Regards
Sudha

Hello,
You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
BR,
Suhas
PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

Compiled CHM File Does Not Reflect New Project Name

I have read many of the experts' responses to posts and found them extremely helpful. However, I have not seen one that addresses my issue.
I have RH HTML Version RH8. I renamed a project via 1) File - Rename Project and 2) Single Source Layouts - Primary Layout - Properties - Output Folder and File Name.
Two problems are: 1) The Project Folder name still reflects the old project name and 2) The CHM file still reflects the old project name.
As a result, the output Help that the user sees still has the old project name in the title bar.
All generated files as well as the RoboHelpHTML Project File were changed to the new project name, just as the RENAME PROJECTS Help says it should. However, the CHM file does not reflect the new project name as it says it should.
1) Can I change the Folder name that was created when I compiled the Help file to the correct name?
2) Can I change the FILENAME in the SELECT OUTPUT FOLDER AND FILENAME window?
3) Can I / should I rename the TOC and Index filenames from the old project name to the new project name? (Help says that changing the project name does not change these file names and it didn't.)
Will any of these actions correct the problem? I appreciate any help you can give.

Welcome to our community
Try File > Project Settings.
And if that doesn't get it, try the Project Set-up pod, windows and change the Window Caption.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Description of field from data element in table control

hello people !!! I need help !!
Im using a table control in my module pool program. I create this table through wizard, taking the fields from an internal table. This internal table was defined like this:
Table Control ; posting items
DATA: t_postitems TYPE stucture_fd OCCURS 0 WITH HEADER LINE.
Where stucture_fd is strucuture with the fields.
The problem that I have is that the titles of the fields does not take their description from the data element.
How I create this table control from the internal table and that takes the description from the data element? It is very important this, because this development will be used in different languages.
From already I am thanking for any answer.
Thank so much.
Best regards, Esther.

Gracias, es mas facil para mi en espanol.
tables: tab_prb.
types: begin of ti.
include structure tab_prb.
types: end of ti.
data: ti_bkpf type table of ti,
wa_bkpf type ti.
Explicacion:
tab_prb, es una tabla transparent que contiene la estructura struct_fd que tiene los campos mas un flag para la seleccion de fila (flag).
Defini esta tabla transparente, para que los campos tomen su decripcion desde los elementos de datos.
Si creo el TB directo de la tabla tab_prb, no me permite seleccionar el campo flag como campo de seleccion, cuya funcion es marcar linea simple.
Si yo hago la definicion anterior en mi programa, cuando creo el TB, va todo bien, hasta ti_bkpf que seria mi tabla interna, pero cuando me pide el work area, le ingreso wa_bkpf me indica que no esta definido en mi programa o ne es una estrucutura.
Espero haber aclarado un poco mi respuesta.
Muchas gracias !!!
Esther.-

802.1x accounting does not reflect correct port status

Hi,
I've just discovered an issue when trying to use MSFT supplicant and Cisco 802.1x accounting. This makes 802.1x accounting completely unusable.
Facts:
1. MSFT supplicant does not send EAPOL-Logoff messages and there's no way to enable this (btw. Aegis client does not send it either, except when disabling interface).
2. I am doing machine authentication along with domain authentication.
3. Windows XP SP2 is used with EAP registry hacks applied.
4. PEAP/MS-CHAPv2 method is used.
Now when the computer is started it is logged into 802.1x with 'host/machine' account and RADIUS accounting start is sent by the switch. That's fine.
When a user logs on with its 'domain\user' identity, then EAPOL-Start is sent from the host triggering new EAP message exchange and the user is authenticated correctly. However the switch sends Interim Accounting still using 'host/machine' credentials which is obviously wrong.
Even more bizarre accounting happens when the user subsequently logs off from the machine. The EAPOL-Start is sent from the host triggering new authentication process for 'host/machine' identity and the host is authenticated ok. The accounting being sent is:
- first Accounting Stop for 'host/machine' User-Name
- then strange Interim Accounting with most attributes empty or missing
256970: Jul 10 15:56:41.211 MET-DST: RADIUS: authenticator 68 CA 1A 46 85 4F F5 95 - 87 B4 84 61 72 85 42 F3
256971: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Id [44] 10 "013F0000"
256972: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 34
256973: Jul 10 15:56:41.211 MET-DST: RADIUS: Cisco AVpair [1] 28 "connect-progress=Auth Open"
256974: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Time [46] 6 0
256975: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Octets [42] 6 0
256976: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Octets [43] 6 0
256977: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Packets [47] 6 0
256978: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Packets [48] 6 0
256979: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
256980: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Status-Type [40] 6 Watchdog [3]
256981: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 24
256982: Jul 10 15:56:41.211 MET-DST: RADIUS: cisco-nas-port [2] 18 "FastEthernet0/11"
256983: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port [5] 6 50011
256984: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port-Type [61] 6 Eth [15]
256985: Jul 10 15:56:41.211 MET-DST: RADIUS: Class [25] 27
256986: Jul 10 15:56:41.215 MET-DST: RADIUS: 43 41 43 53 3A 30 2F 32 39 32 66 2F 61 38 31 38 [CACS:0/292f/a818]
256987: Jul 10 15:56:41.215 MET-DST: RADIUS: 30 32 38 2F 35 30 30 31 31 [028/50011]
256988: Jul 10 15:56:41.215 MET-DST: RADIUS: Service-Type [6] 6 Framed [2]
256989: Jul 10 15:56:41.215 MET-DST: RADIUS: NAS-IP-Address [4] 6 10.129.128.40
256990: Jul 10 15:56:41.215 MET-DST: RADIUS: Acct-Delay-Time [41] 6 0
256991: Jul 10 15:56:41.239 MET-DST: RADIUS: Received from id 1646/238 10.129.128.38:1813, Accounting-response, len 20
256992: Jul 10 15:56:41.239 MET-DST: RADIUS: authenticator ED 8E 8B 15 28 5F E4 37 - BF A8 F5 9E 10 43 5E A8
So that the accounting sent from the switch does not reflect current status of the authenticated user on a given port.
How to deal with this issue? Any ideas?
thanks,
robert

Does your radius proxy-table is populated wrong for EAP- SIM users ?

Delete records in itab1 where key fields does not exit in itab2 w/o Loop

Hi,
I am trying to find the most efficient way to compare two internal tables and filter out (delete) the entries in Internal Table 1 (ITAB1) where the key fields does not exist in internal table 2 (ITAB2).
Here is the codes using the Loop.
Loop at itab1.
read table itab2 where field1 = itab1-field1 and field2 = itab1-field2.
if sy-subrc ne 0.
delete itab1 where field1 = itab1-field1 and field2 = itab-field2.
endif.
endloop.
Instead of looping thru each record of ITAB1, is there a way to use the "DELETE" or other efficient way? This is in ECC 6.0.
Thanks for any advice in advance.

Not sure if its possible without using even a single loop. Though you can avoid the read statement this way
loop at itab2.
delete itab1 where field1 NE itab2-field1 and field2 NE itab2-field2.
endloop.

Position does not exist in table T528

I have transported from Dev to QAS.
I am trying to hire an employee using PA40 and when i select position it is giving an error saying does not exist in table T528

Hello,
I have created a entire new org. structure in QA including the positions.
When I am trying to assign the positions I am getting the same error as entry does not exist in table T528B.
I have checked the table and there are no entires for my positions.
What I need to do now?
Kindly reply.
Thank you

Add a new field to an existing Condition table

How can I add a new field to an existing condition table?
I have table 971 and I want to add INCOTERMS (INCO1) to this existing table but do not see how to add it.
Thanks

Hi Vicky,
I dont think you can add new fields to the condition table once you have activated the condition table.
SAP says you can only make limited changes to the condition table, like changing the description, fast entry screen, header and footer fields, but not able to add new fields to the table, and I think that is the correct approch or else for the same table you will have two sets of condition records.
Please refer to the below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
What you can do is create a new condition table with additional field and assign this table before the currently used table in the access sequence.
Hope this helps.
Regards
Raj

New field does not reflect in Table control

Similar Messages

Maybe you are looking for