New field in condition record for batch determination

Hi Gurus,
I'm trying to create a new batch determination transaction OMA1 and I have found that the fields I need are not displayed in either KOMGH Maintenance, KOMKH Determination header, KOMPH Determination item.
My question is has anyone entered new fields for selection here and how can this be done?
Regards
Frankie
Edited by: Frankie Summerbell on Feb 3, 2010 11:27 AM

Hello Robin and Frankie,
I am also facing the same requirement, were you able to solve, if yes kindly share the solution, If not what is the alternative approach you did in order to satisfy your requirement.
Thanks in advance.
Regards,
Sathish,
Edited by: Sathish1 on Feb 23, 2012 8:45 AM

Similar Messages

Adding one more field in field catalog for batch determination

Hi,
I am configuring batch determination..I need to create condition table based on plant and material type... but material type field is not there in the field catalog...I need to add field MTART (Material Type) in the field catalog. can you please guide me how to do that...
Thanks
Kumar

Hi Kumar,
Go to SPRO---Batch Management---Batch Determination and Batch Check---Condition Tables--Define Production Order Condition Tables here select Conditions: Allowed Fields (Process Order) here first add the field MTART Material Type then it will be available Condition Table for Batch Determination.
Regards,
R.Brahmankar

Table for batch determination date

hi,
im printing the Dispensing slip...they want the output based on the batch determination date..
can any one tel me in which table i willl get batch determination date?
Regards
Smitha

Are you using a separate batch selection class versus the batch class?
There are characteristics that must be in the selection class, but cannot be in the batch class.
See OSS note 33396.
1. If you want to search for batches on the basis of a remaining shelf
         life in batch determination, the system has to calculate a requested
         shelf life expiration date dynamically from the information you
         give.
     2. Add characteristic LOBM_VFDAT to the batch classes.
         For the revaluation of reference characteristics, refer to Note
         78235.
         Characteristics LOBM_RLZ and LOBM_LFDAT must not be included in the
         batch classes!
     3. Add characteristics LOBM_VFDAT, LOBM_LFDAT, and LOBM_RLZ to the
         selection classes.
         Maintain a remaining shelf life in the strategy records for batch
         determination. Relational operators (> , < , <= , >=) are considered
         in the dynamic calculation of the shelf life expiration date in
         batch determination.
From your note you have placed LOBM_RLZ and LOBM_LFDAT in your batch class. You cannot do that.
FF

Create condition table for account determination

I would like to create a condition table which contains customer number as the key. However, I can only find the follow fields in field catalog.
Acct Key
AcctAsgnmt
AcctAssgGr
Cond. Type
Distr. Chl
Division
Ord. reason
Plant
Sales org.
Tax Code
Vendor
Is it possible to extend the field catalog? I have tried to added fields in KOMG according to note 21040, but it seems not work.

Hi
some additional information:
please check the documentation under customizing path:
IMG -> Sales and Distribution -> System Modifications ->
Create New Fields (Using Condition Technique) ->
New Fields For Account Determination
click on the icon
Notice that the userexits USEREXIT_ACCOUNT_PREP_KOMKCV and
USEREXIT_ACCOUNT_PREP_KOMPCV are useful only for revenue
account determination.
For reconciliation account determination you should use the userexit
EXIT_SAPLV60B_011 (enhancement SDVFX011) to fill the custom field.
The System modification documentation exaplins to add the new field
in the structure include KOMKCZ of KOMPCZ.
Notice that KOMKCZ is included in KOMKCV and KOMCV; KOMPCZ is included
in KOMPCV and KOMCV.
regards,
Ramana

The condition record for use B can not be displayed

Hi gururs,
What does this message (number : VE896 ) mean ?
How to make it desapear ?
P.S : it's about output type for purchase orders.
This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N.
Regards,
Bahia.

Hi
It means you are trying to veiw the executed condition record. System found the condition record for entered transactional data which you cannot see by clicking on it (when you see green record in condition analysis).
For given condition type -> and access sequence/ access - system shows the condition record that is determined. You can see its details by clicking the access which shows the message that condition record has been found with its determined parameters.
Ex: For batch determination I have set up one search strategy with a condition type (with access sequence). I created one condition record. When creating say sales order -batch determination takes place based on condition record parameters. System shows a green light for determined condition record. You cannot see its details - if you try to see then system issues a message like ''The condition record for use B can not be displayed''. If you want to see click on its immediate predecessor (access ).
Thanks

Condition record for tax calculation

hi .
how to populate value for condition type MWAS (outputax)
where to create?

hi,
Tax is determined based on,
1) Departure Country , departure Zone is taken from delivering plant
2) Destination Country of the customer receiving the goods( i.e Ship to party)
3) Tax indicators in CMR >Sale area data>billing tab page& MMR>Sales:sale org data1 view.
Maintain all the above in the condition records for determining the tax condition rate in pricing procedure.
Reward if it is useful.
MCM

Tables names for Batch determination

tables used for Batch Determination screen in MIGO?
Regards,
pandu.

Dear Pandurangarao,
For your future requirements,
You may also check the same (i.e. Table Name/ Field Name/ Program Name/ Screen Field) by yourself.
There are few requirements:
1. You have to decide from where (i.e. Document..???, say Sales Order in VA02) you want to fecth the data for your requirement.
2. Go in to that document (say, you wanna all data to be fetch from Sales Order; then VA02).
3. Click one within the field and Press F1. This will open an Overview window. In to the same window, down there, you will find on e Tab: Technical Information. Click the Tab.
4. Now, you may get all technical informations for your inputs.
Best Regards,
Amit

How to find table / field where condition records are saved?

Hi,
We want Sales Order Rate ( Condition type ZR00 calculated with backward pricing ), as a column in a Z report.
I am not able to find out the table / field where system saves condition records for this condition type. I can only see structure.
Please help to trace down the field where this data is stored.
Regards
Trupti

Hi Vishal,
KNUM is the internal number under which system saves the conditions that apply to a Sales Order.
So first to derive this KNUM from sales order we use Table VBAK
AFter this we use this KNUM and the condition type in table KONV to get the value for that perticular condition type.
Please check following.
SE16> VBAK> enter any sales order in field VBELN and note down number in field KNUM.
SE16 --> KONV --> enter this KNUM and the condition type --> you would receive condition record value for this condition type, for that sales order.
KNUMH is a similar field in the table A503( in our case), but we also wanted link of the sales order to this record.
Thanks for your help anyways!!
points provided.

How to maintain price condition record for the following senario

Hi Gurus,
I have a scenario where storage charges can apply either per cbm or per sq.mt or per day.
for a single customer.
Another situation --- Handling in Palletized charges per cbm or per pallet for a single customer
can somebody help me on this.
Thanks,
RR

Hi,
Scenario 1:
Go to VK11 tcode and Enter your KAD1 COndition Type.
Now maintain the Condition Record for your Customer.
Scenario 2:
Go to VK11 tcode and Enter your KP00 COndition Type.
Now maintain the Condition Record for your Customer.
Note for Scnario 2: Please make sure for KP00, the field Plus/minus in Condition Type setting should be "A" i.e the Surcharge. It is because the same condition Type can be used for Discount as well as for Surcharge.
The condition Type setting for KP00 can be done by going to V/06 tcode
Regards

Condition Record for picking Output List

Dear All
Kindly let me know where do we maintain condition record for Picking Output list.
Where do we define a new Output Type for Picking List
Regards
Srihari

Hi Srihari,
I think i have got the question rightly interpreted.
All you want is to maintain condition records for picking ouptut ... correct ?
You can do it through transaction<b> VP01SHP</b> ....(dont try to find it in easy access..atleast I could not locate it)
Under TCD VP01SHP > V4 you will be able to maintain condition records for all condition types that have been configured for picking.
Hope this helps you .... <b>if yes then pls reward liberally !!</b>
KInd Regards
Sachin Bhonsle

How to create STO Condition record for a condition Type ?

I am doing config for STO.
in MEK1 , it is asking for Vendor, but in my case I am doing STO by using delivery VL01 and receipt by MIGO.
I want to know abt- How to create Condition Record for STO so that STO order will have Moving Average Price f Material.
Sorry I m new to MM so pls help.

Solved

Filter for batch determination of production order

Filter for batch determination of production order
Dear guru ,
We trigger batch determination manually for every production order using CO02.
How can I understand whose are the production orders arenu2019t taking place batch determination?
Checking all the production orders is too heavy ?
Does exist a massive transaction (coois or others) where I can select the production orders with components not assigned to the batch ?
Thanks in advance

Hi
In COOIS > In the initial screen select Documented Goods movement in the list Field along with and other selection criteria and run the Report
In the list of orders > Expand corresponding order to view Documented goods movements list with the components with and w/o batch numbers
Regards
Brahmaji

VA01 user exit to manually insert condition record for sales order

Hello Experts,
I have a req. to find a user exit through which I can insert a new condition record for a sales order everytime a sales order is created.
Whenever a sales order is created I should check whether condition types X and Y are being generated for the particular sales order.If yes I have to insert a new condition record with type Z for that sales order after some calculations.
Does anybody have an idea which user exit should be used so that my new condition comes up in the CONDITIONS tab for the sales order item.
Thanks in anticipation.
Vipul

Hi,
What I suggest is suppose you want condition type say 'XXX' to appear with some calculated value only when condition type 'X' & 'Y' are present, then let the consultant define that condition type in pricing procedure, with 'Manual Entry not allowd flag on, so that nobody can overwrite the value calculated by your routine in condition type 'XXX' & let him 'attach; a routine say 901 to it. Now via VOFM in routine 901 you can put your logic. In routine 901 you can loop at xkomv & check if both condition types viz. 'X' & 'Y' are present. IF yes then calculate the value of condition type 'XXX' as per the logic required & pass it on to SAP by xkomv-kwert = w_amount, where w_amount is the value calculated by you as per the logic required.
I hope this helps,
Regards
Raju Chitale

FM or BAPI for creating/deleting condition records for an output type

Hi all,
what is the FM or BAPI for creating and deleting the condition records for a Z(custom) output type.

You can use trasaction SXDA_TOOLS.....
object type BUS3003
program type BINP
program/method RM06IBI0
but the fields must be sequentially written in the txt, with every space inclusive....

Own condition tables for tax determination purposes

Hi,
While using TAXINN pricing procedure. For simplified tax rate determination, we want to create our own condition tables for tax determination purposes, as is otherwise possible with the conditions technique.
The existing conditions which are pre-delivered with access sequence/s are as:-
TABLE     Description
3     Tax Classification
363     Plant/Vendor/Material
358     Country/Plant/Ctrl code/Material
357     Country/Plant/Ctrl code
362     Country/NBM-NCM Code
359     Plant/Matl group
However we want to create a custom table (9xx:Vendor/Material) with which can meet our requirement of tax determination while purchasing materials.
Could you please elaborate weather our requirement can be fulfilled by standard customization?
Thanking you.
PP

hi sam,
Thanks for reply. I watched many posts related to this issue and your reply is generic one.
I understand that all kind of requirement can be meet with existing data.
I am writing here because I want to reduce the number of records to be maintained. (say, Plant/Vendor/Material, if I have 10 Plants then no of records will be 10 different Plants x vendor x Mat. codes. Hence I am keen to have as Vendor/Mat. code. SAP delivered Plant/Matl group somehow not fulfilling our business need).
I am interested to know weather it is possible to create a custom condition table to meet our requirement/s?
What is your opinion on this..? Please share if you know any SAP Note as am unable to find any relevant one.
Thanks,
PP

New field in condition record for batch determination

Similar Messages

Maybe you are looking for