New HNSC displays error when adding an app

I've created a new HNSC with a custom master page. It is not in production yet.
When clicking Site Contents -> "add an app", the corresponding /_layouts/15/addanapp.aspx page shows this error: "The file '/_layouts/15/_controltemplates/15/TopNavBar.ascx'
does not exist."
No edits have been made to any controltemplates files, and I have verified the existence of the file on the servers. I can create the new app in SPD, but my users ultimately will need to create content through the UI and not SPD.
I've checked the ULS logs and the only line that stood out at me was this:
"The Request Management Service is offline or unprovisioned. Request Management is disabled. Status = Disabled"
You can read the whole verbose ULS log for yourself
here, if you're so inclined.
If I change the site and/or system master page to an OOTB version, there is no change in the behavior (still get the error).
This behavior only exists in my new HNSC, so I'm not sure what is corrupt. Any help is much appreciated. Thank you!

Hi,
You said this behavior only existed in your new HNSC, whether this issue occurs if you create a new HNSC.
As you customized a master page, please make sure the custom master page has been published.
Also, make sure the default master page is published, and change site master page to the default master page, compare the result.
If this issue still exists, please feel free to let me know.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.

Hi everyone,
I `m getting error message like this "Error occurred in deployment step 'Install app for SharePoint': There were errors when validating the App manifest.". when i try to debug the application with "Start Action"="Internet Explorer".This
application is an apps for office application with Oauth with Office 365
Any help in this regard is greatly appreciated
Thanks!!
Santosh Sutar

Thanks Fei for your time.
>>>I would suggest that you create a new project and set it start action with 'Internet Explorer'
to see whether this issue could be reproduced. If no, we can compare the difference between the two menifest files.
As per your suggestion above ,With new project,I can debug with with start action "Internet Explorer" and I
could not see much difference between the manifest files.
Please find below my manifest file for the reference .
<?xml version="1.0" encoding="UTF-8"?>

<OfficeApp xmlns="http://schemas.microsoft.com/office/appforoffice/1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="TaskPaneApp">
<Id>084cd6cd-2908-44d1-a5cf-4fa029aec211</Id>
<Version>1.0.0.0</Version>
<ProviderName>[Provider name]</ProviderName>
<DefaultLocale>en-US</DefaultLocale>
<DisplayName DefaultValue="Office 365 MVC" />
<Description DefaultValue="Office 365 MVC"/>
<AppDomains>
<AppDomain>https://login.microsoftonline.com</AppDomain>
</AppDomains>
<Hosts>
<Host Name="Document" />
<Host Name="Workbook" />
</Hosts>
<DefaultSettings>
<SourceLocation DefaultValue="~remoteAppUrl/Home/Index/" />
</DefaultSettings>
<Permissions>ReadWriteDocument</Permissions>
</OfficeApp>
Please suggest on this.
Thanks !!
Santosh Sutar

Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled

When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
Using Oracle EBS version 12.1.3.
Details:
Menu JOB_STRUCTURE_MENU
User Menu Name Job Strucure Menu
Menu Type Standard
Description Menu to add job, grade, and incentives
Seq = 1
Prompt = Enter and Maintain
Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
When I click save I get the error.
Any assistance would be greatly appreciated.
Thanks!

Please post the details of the application release, database version and OS.
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
Did AutoConfig complete successfully?
When I click save I get the error.
Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
Any errors in the database log file?
Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

"The Page Cannot Be Displayed" error when clicking the Remote Agent

Hi everyone! We have installed ACS SE 4.0 and we have added a remote agent running on Windows Server 2003. Recently, we are encountering "The page cannot be displayed" error when we click the RA under a network device group. This is resolved by rebooting the ACS SE appliance and accessing the ACS SE web console again but after few hours, problem reoccurs. Clicking the links on the ACS SE web console is okay at first but after clicking the RA, every link shows the error "The page cannot be displayed." Hope you could help us on this problem. Anyone's support is very much appreciated.
Thanks!

Hi JG,
Thank you so much for your response. Does Cisco have a documentation that states that this is a known issue with 4.0, such as release notes, for we might need this for the proposal upgrade?
Again, thanks a lot!

Page cannot be displayed error when login to EBS home page

Hi All,
I have some problem login to EBS page, if only one responsibility is active to user it will get error Page cannot be Displayed error 404 on the Main Menu.
However if 2 or more responsibilities are active no error will come up and it will show all responsibilities.
Below is the log I got from apache.
[Thu Apr 28 15:58:26 2011] [warn] mod_plsql: Stale Connection due to Oracle error 6502
[Thu Apr 28 15:58:26 2011] [error] mod_plsql: /pls/XXX/OracleNavigate.menuBypass ORA-6502
ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error
ORA-06512: at "APPS.ICX_CALL", line 1077
ORA-06512: at "APPS.ORACLENAVIGATE", line 2358
ORA-06512: at line 28
Appreciate if someone can share something about this.
Database Server
RDBMS : 10.2.0.2.0
Oracle Applications : 11.5.10.2
Thanks a lot

Hi All,
Thanks for all your help.
Seems I already found out the issue.
Since we are using "Personal Home Page" for the system profile option "Self Service Personal Home Page Mode" I checked oracle note and found out
that 11i did not support this mode. Maybe this is the problem that is why we are getting page cannot be displayed error when only 1 responsibility is active.
The way to fix this, is to use mode 'Framework Only' instead of 'Personal Home Page' as Oracle are phasing out mod_plsql based UI and it will not be present in future releases. No maintenance is being performed (i.e. bug fixes) to the mod_plsql based UI technology.
Please check this note for more clearer explanation:
Is The 'Personal Home Page' Mode Supported In Oracle 11i Applications? [ID 368628.1]
Again, thank you for your help!

Error when adding a partition to a materlialized view

Hi,
I am getting this error when adding a partition to a materialized view.
ALTER MATERIALIZED VIEW mvedw.MV_CLM_CAPITN_F ADD PARTITION MAR2013 VALUES LESS THAN ('201304')
ERROR at line 1:
ORA-14074: partition bound must collate higher than that of the last partition
Please advise.
Regards,
Narayan

SQL> select TABLE_OWNER,TABLE_NAME,PARTITION_NAME,HIGH_VALUE from dba_tab_partitions where table_name =
'MV_CLM_CAPITN_F' order by PARTITION_NAME 2
3 ;
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F APR2009 '200905'
MVEDW MV_CLM_CAPITN_F APR2010 '201005'
MVEDW MV_CLM_CAPITN_F APR2011 '201105'
MVEDW MV_CLM_CAPITN_F APR2012 '201205'
MVEDW MV_CLM_CAPITN_F AUG2009 '200909'
MVEDW MV_CLM_CAPITN_F AUG2010 '201009'
MVEDW MV_CLM_CAPITN_F AUG2011 '201109'
MVEDW MV_CLM_CAPITN_F AUG2012 '201209'
MVEDW MV_CLM_CAPITN_F DEC2008 '200901'
MVEDW MV_CLM_CAPITN_F DEC2009 '201001'
MVEDW MV_CLM_CAPITN_F DEC2010 '201101'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F DEC2012 '201301'
MVEDW MV_CLM_CAPITN_F FEB2009 '200903'
MVEDW MV_CLM_CAPITN_F FEB2010 '201003'
MVEDW MV_CLM_CAPITN_F FEB2011 '201103'
MVEDW MV_CLM_CAPITN_F FEB2012 '201203'
MVEDW MV_CLM_CAPITN_F FEB2013 '201303'
MVEDW MV_CLM_CAPITN_F JAN2009 '200902'
MVEDW MV_CLM_CAPITN_F JAN2010 '201002'
MVEDW MV_CLM_CAPITN_F JAN2011 '201102'
MVEDW MV_CLM_CAPITN_F JAN2012 '201202'
MVEDW MV_CLM_CAPITN_F JAN2013 '201302'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F JUL2009 '200908'
MVEDW MV_CLM_CAPITN_F JUL2010 '201008'
MVEDW MV_CLM_CAPITN_F JUL2011 '201108'
MVEDW MV_CLM_CAPITN_F JUL2012 '201208'
MVEDW MV_CLM_CAPITN_F JUN2009 '200907'
MVEDW MV_CLM_CAPITN_F JUN2010 '201007'
MVEDW MV_CLM_CAPITN_F JUN2011 '201107'
MVEDW MV_CLM_CAPITN_F JUN2012 '201207'
MVEDW MV_CLM_CAPITN_F MAR2009 '200904'
MVEDW MV_CLM_CAPITN_F MAR2010 '201004'
MVEDW MV_CLM_CAPITN_F MAR2011 '201104'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F MAR2012 '201204'
MVEDW MV_CLM_CAPITN_F MAR2013 '201304'
MVEDW MV_CLM_CAPITN_F MAY2009 '200906'
MVEDW MV_CLM_CAPITN_F MAY2010 '201006'
MVEDW MV_CLM_CAPITN_F MAY2011 '201106'
MVEDW MV_CLM_CAPITN_F NOV2009 '200912'
MVEDW MV_CLM_CAPITN_F NOV2010 '201012'
MVEDW MV_CLM_CAPITN_F NOV2012 '201212'
MVEDW MV_CLM_CAPITN_F OCT2009 '200911'
MVEDW MV_CLM_CAPITN_F OCT2010 '201011'
MVEDW MV_CLM_CAPITN_F OCT2011 '201111'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F OCT2012 '201211'
MVEDW MV_CLM_CAPITN_F SEP2009 '200910'
MVEDW MV_CLM_CAPITN_F SEP2010 '201010'
MVEDW MV_CLM_CAPITN_F SEP2011 '201110'
MVEDW MV_CLM_CAPITN_F SEP2012 '201210'
These are the list of partitions available.
Regards,
Narayan

"Page cannot be displayed" error when attempting to download large dataset.

In the following code, can anybody please tell me at what point the data actually starts to get transferred and the popup "download file" box appears? I'm thinking that the dialog box should appear on the first outputstream.write and start transferring data. However, I think it's not transferring the data until the while loop has finished! That's bad because this is a real long process and I eventually get "Page cannot be displayed" error. On a smaller dataset (shorter while loop) everything seems to work correctly. Is there some sort of a web server configuration that tells it to write out the data ONLY if outputstream closes? I really need it to write out the data as it's coming in. Code is below and thanks in advance.
response.setHeader("Expires", "0");
response.setHeader("Content-disposition","inline;filename=Download.csv");
response.setContentType("application/x-msdownload");
outputStream = response.getOutputStream();
bufferInBytes = this.getData();
while (bufferInBytes != null)
outputStream.write(bufferInBytes, 0, bufferInBytes.length);
outputStream.flush();
bufferInBytes = this.getData();
outputStream.close();

Hi All,
Thanks for all your help.
Seems I already found out the issue.
Since we are using "Personal Home Page" for the system profile option "Self Service Personal Home Page Mode" I checked oracle note and found out
that 11i did not support this mode. Maybe this is the problem that is why we are getting page cannot be displayed error when only 1 responsibility is active.
The way to fix this, is to use mode 'Framework Only' instead of 'Personal Home Page' as Oracle are phasing out mod_plsql based UI and it will not be present in future releases. No maintenance is being performed (i.e. bug fixes) to the mod_plsql based UI technology.
Please check this note for more clearer explanation:
Is The 'Personal Home Page' Mode Supported In Oracle 11i Applications? [ID 368628.1]
Again, thank you for your help!

'Install App for SharePoint' There were errors when validating the App Package

Hello,
When testing with an app, I tried to add an
app event receiver before learning that remote event receiver are not allowed with
Sharepoint-hosted app. So I reseted the Handle app installed and
Web Project properties of my project and tried to redeploy and this error occurred :
'Install App for SharePoint' There were errors when validating the App Package
Something other than the project's properties have been modified but I don't know what.

I think the best way to figure real reason out is to look at ULS logs.
This is example, what I had:
Unexpected App Packaging: CreatePackage: Unexpected exception: There were errors when validating the App package: There were errors when validating the App Package. Other warnings / errors associated with this
exception: The current version of SharePoint is less than the SharePointMinVersion specified in the app manifest. CurrentVersion='15.0.4693.1000', SharePointMinVersion='16.0.0.0'.

Error when adding Essbase server...

Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
h

The things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck,

Library error when adding contact or when logging in

The messenger server has a replica of the partition holding the users.
It's an OES 2 sp2 server, and the GW Messenger is 2.04.
Sometimes we see an error that says 'Library error' when adding a contact, or it doesn't show all users that exists with the search parameter given.
We also sporadically see a 'Library error' when some users log in to it.
Looking in the log I see an error that says 0xAE16 when users log in fails.
I can find the 0xAE11 error in the TID's but not the 0xAE16, I did find an article on the forums, mentioning this problem http://forums.novell.com/novell-prod...or-server.html, they mention memory problems, so it seems to me there is a bug that needs fixing.

I've disabled the '/diruseralias-"Internet EMail Address"' setting that was set up in the strtup.ma and strtup.aa scripts.
I've also, for now at least, chosen another replica.
I haven't seen the errors yet, so here's hoping...

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

TableSorter errors when adding new data

so here is the deal:
I am using the TableSorter.java helper class with DefaultTableModel
from: http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
It works great when the data is static and I get it for the first time. however, occationally, when adding new data I get a NullPointerException error.
in use:
DefaultTableModel.addRow()
DefaultTableModel.removeRow() and
DefaultTableModel.insertRow() methods.
Error:
java.lang.ArrayIndexOutOfBoundsException: 5
     at com.shared.model.TableSorter.modelIndex(TableSorter.java:294)
     at com.shared.model.TableSorter.getValueAt(TableSorter.java:340)
     at javax.swing.JTable.getValueAt(Unknown Source)
     at javax.swing.JTable.prepareRenderer(Unknown Source)...
code problem I:
    public Object getValueAt(int row, int column)
        return tableModel.getValueAt(modelIndex(row), column);
    }code problem II:
    public int modelIndex(int viewIndex)
             return getViewToModel()[viewIndex].modelIndex;
    }TableSroter class:
package com.shared.model;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
import javax.swing.*;
import javax.swing.event.TableModelEvent;
import javax.swing.event.TableModelListener;
import javax.swing.table.*;
* TableSorter is a decorator for TableModels; adding sorting
* functionality to a supplied TableModel. TableSorter does
* not store or copy the data in its TableModel; instead it maintains
* a map from the row indexes of the view to the row indexes of the
* model. As requests are made of the sorter (like getValueAt(row, col))
* they are passed to the underlying model after the row numbers
* have been translated via the internal mapping array. This way,
* the TableSorter appears to hold another copy of the table
* with the rows in a different order.
* <p/>
* TableSorter registers itself as a listener to the underlying model,
* just as the JTable itself would. Events recieved from the model
* are examined, sometimes manipulated (typically widened), and then
* passed on to the TableSorter's listeners (typically the JTable).
* If a change to the model has invalidated the order of TableSorter's
* rows, a note of this is made and the sorter will resort the
* rows the next time a value is requested.
* <p/>
* When the tableHeader property is set, either by using the
* setTableHeader() method or the two argument constructor, the
* table header may be used as a complete UI for TableSorter.
* The default renderer of the tableHeader is decorated with a renderer
* that indicates the sorting status of each column. In addition,
* a mouse listener is installed with the following behavior:
* <ul>
* <li>
* Mouse-click: Clears the sorting status of all other columns
* and advances the sorting status of that column through three
* values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to
* NOT_SORTED again).
* <li>
* SHIFT-mouse-click: Clears the sorting status of all other columns
* and cycles the sorting status of the column through the same
* three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
* <li>
* CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except
* that the changes to the column do not cancel the statuses of columns
* that are already sorting - giving a way to initiate a compound
* sort.
* </ul>
* <p/>
* This is a long overdue rewrite of a class of the same name that
* first appeared in the swing table demos in 1997.
* @author Philip Milne
* @author Brendon McLean
* @author Dan van Enckevort
* @author Parwinder Sekhon
* @version 2.0 02/27/04
public class TableSorter extends AbstractTableModel
    protected TableModel tableModel;
    public static final int DESCENDING = -1;
    public static final int NOT_SORTED = 0;
    public static final int ASCENDING = 1;
    private static Directive EMPTY_DIRECTIVE = new Directive(-1, NOT_SORTED);
    public static final Comparator COMPARABLE_COMAPRATOR = new Comparator()
        public int compare(Object o1, Object o2)
            return ((Comparable) o1).compareTo(o2);
    public static final Comparator LEXICAL_COMPARATOR = new Comparator()
        public int compare(Object o1, Object o2)
            return o1.toString().compareTo(o2.toString());
    private Row[] viewToModel;
    private int[] modelToView;
    private JTableHeader tableHeader;
    private MouseListener mouseListener;
    private TableModelListener tableModelListener;
    private Map columnComparators = new HashMap();
    private List sortingColumns = new ArrayList();
    public TableSorter()
        this.mouseListener = new MouseHandler();
        this.tableModelListener = new TableModelHandler();
    public TableSorter(TableModel tableModel)
        this();
        setTableModel(tableModel);
    public TableSorter(TableModel tableModel, JTableHeader tableHeader)
        this();
        setTableHeader(tableHeader);
        setTableModel(tableModel);
    private void clearSortingState()
        viewToModel = null;
        modelToView = null;
    public TableModel getTableModel()
        return tableModel;
    public void setTableModel(TableModel tableModel)
        if (this.tableModel != null)
            this.tableModel.removeTableModelListener(tableModelListener);
        this.tableModel = tableModel;
        if (this.tableModel != null)
            this.tableModel.addTableModelListener(tableModelListener);
        clearSortingState();
        fireTableStructureChanged();
    public JTableHeader getTableHeader()
        return tableHeader;
    public void setTableHeader(JTableHeader tableHeader)
        if (this.tableHeader != null)
            this.tableHeader.removeMouseListener(mouseListener);
            TableCellRenderer defaultRenderer = this.tableHeader.getDefaultRenderer();
            if (defaultRenderer instanceof SortableHeaderRenderer)
                this.tableHeader.setDefaultRenderer(((SortableHeaderRenderer) defaultRenderer).tableCellRenderer);
        this.tableHeader = tableHeader;
        if (this.tableHeader != null)
            this.tableHeader.addMouseListener(mouseListener);
            this.tableHeader.setDefaultRenderer
                    new SortableHeaderRenderer(this.tableHeader.getDefaultRenderer())
    public boolean isSorting()
        return sortingColumns.size() != 0;
    private Directive getDirective(int column)
        for (int i = 0; i < sortingColumns.size(); i++)
            Directive directive = (Directive)sortingColumns.get(i);
            if (directive.column == column)
                return directive;
        return EMPTY_DIRECTIVE;
    public int getSortingStatus(int column)
        return getDirective(column).direction;
    private void sortingStatusChanged()
        clearSortingState();
        fireTableDataChanged();
        if (tableHeader != null)
            tableHeader.repaint();
    public void setSortingStatus(int column, int status)
        Directive directive = getDirective(column);
        if (directive != EMPTY_DIRECTIVE)
            sortingColumns.remove(directive);
        if (status != NOT_SORTED)
            sortingColumns.add(new Directive(column, status));
        sortingStatusChanged();
    protected Icon getHeaderRendererIcon(int column, int size)
        Directive directive = getDirective(column);
        if (directive == EMPTY_DIRECTIVE)
            return null;
        return new Arrow(directive.direction == DESCENDING, size, sortingColumns.indexOf(directive));
    private void cancelSorting()
        sortingColumns.clear();
        sortingStatusChanged();
    public void setColumnComparator(Class type, Comparator comparator)
        if (comparator == null)
            columnComparators.remove(type);
        else
            columnComparators.put(type, comparator);
    protected Comparator getComparator(int column)
        Class columnType = tableModel.getColumnClass(column);
        Comparator comparator = (Comparator) columnComparators.get(columnType);
        if (comparator != null)
            return comparator;
        if (Comparable.class.isAssignableFrom(columnType))
            return COMPARABLE_COMAPRATOR;
        return LEXICAL_COMPARATOR;
    private Row[] getViewToModel()
        if (viewToModel == null)
            int tableModelRowCount = tableModel.getRowCount();
            viewToModel = new Row[tableModelRowCount];
            for (int row = 0; row < tableModelRowCount; row++)
                viewToModel[row] = new Row(row);
            if (isSorting())
                Arrays.sort(viewToModel);
        return viewToModel;
    public int modelIndex(int viewIndex)
             return getViewToModel()[viewIndex].modelIndex;
    private int[] getModelToView()
        if (modelToView == null)
            int n = getViewToModel().length;
            modelToView = new int[n];
            for (int i = 0; i < n; i++)
                modelToView[modelIndex(i)] = i;
        return modelToView;
    // TableModel interface methods
    public int getRowCount()
        return (tableModel == null) ? 0 : tableModel.getRowCount();
    public int getColumnCount()
        return (tableModel == null) ? 0 : tableModel.getColumnCount();
    public String getColumnName(int column)
        return tableModel.getColumnName(column);
    public Class getColumnClass(int column)
        return tableModel.getColumnClass(column);
    public boolean isCellEditable(int row, int column)
        return tableModel.isCellEditable(modelIndex(row), column);
    public Object getValueAt(int row, int column)
        return tableModel.getValueAt(modelIndex(row), column);
    public void setValueAt(Object aValue, int row, int column)
        tableModel.setValueAt(aValue, modelIndex(row), column);
    // Helper classes
    private class Row implements Comparable
        private int modelIndex;
        public Row(int index)
            this.modelIndex = index;
        public int compareTo(Object o)
            int row1 = modelIndex;
            int row2 = ((Row) o).modelIndex;
            for (Iterator it = sortingColumns.iterator(); it.hasNext();)
                Directive directive = (Directive) it.next();
                int column = directive.column;
                Object o1 = tableModel.getValueAt(row1, column);
                Object o2 = tableModel.getValueAt(row2, column);
                int comparison = 0;
                // Define null less than everything, except null.
                if (o1 == null && o2 == null)
                    comparison = 0;
                } else if (o1 == null)
                    comparison = -1;
                } else if (o2 == null)
                    comparison = 1;
                } else {
                    comparison = getComparator(column).compare(o1, o2);
                if (comparison != 0)
                    return directive.direction == DESCENDING ? -comparison : comparison;
            return 0;
    private class TableModelHandler implements TableModelListener
        public void tableChanged(TableModelEvent e)
            // If we're not sorting by anything, just pass the event along.
            if (!isSorting())
                clearSortingState();
                fireTableChanged(e);
                return;
            // If the table structure has changed, cancel the sorting; the
            // sorting columns may have been either moved or deleted from
            // the model.
            if (e.getFirstRow() == TableModelEvent.HEADER_ROW)
                cancelSorting();
                fireTableChanged(e);
                return;
            // We can map a cell event through to the view without widening
            // when the following conditions apply:
            // a) all the changes are on one row (e.getFirstRow() == e.getLastRow()) and,
            // b) all the changes are in one column (column != TableModelEvent.ALL_COLUMNS) and,
            // c) we are not sorting on that column (getSortingStatus(column) == NOT_SORTED) and,
            // d) a reverse lookup will not trigger a sort (modelToView != null)
            // Note: INSERT and DELETE events fail this test as they have column == ALL_COLUMNS.
            // The last check, for (modelToView != null) is to see if modelToView
            // is already allocated. If we don't do this check; sorting can become
            // a performance bottleneck for applications where cells
            // change rapidly in different parts of the table. If cells
            // change alternately in the sorting column and then outside of
            // it this class can end up re-sorting on alternate cell updates -
            // which can be a performance problem for large tables. The last
            // clause avoids this problem.
            int column = e.getColumn();
            if (e.getFirstRow() == e.getLastRow()
                    && column != TableModelEvent.ALL_COLUMNS
                    && getSortingStatus(column) == NOT_SORTED
                    && modelToView != null)
                int viewIndex = getModelToView()[e.getFirstRow()];
                fireTableChanged(new TableModelEvent(TableSorter.this,
                                                     viewIndex, viewIndex,
                                                     column, e.getType()));
                return;
            // Something has happened to the data that may have invalidated the row order.
            clearSortingState();
            fireTableDataChanged();
            return;
    private class MouseHandler extends MouseAdapter
        public void mouseClicked(MouseEvent e)
            JTableHeader h = (JTableHeader) e.getSource();
            TableColumnModel columnModel = h.getColumnModel();
            int viewColumn = columnModel.getColumnIndexAtX(e.getX());
            int column = columnModel.getColumn(viewColumn).getModelIndex();
            if (column != -1)
                int status = getSortingStatus(column);
                if (!e.isControlDown())
                    cancelSorting();
                // Cycle the sorting states through {NOT_SORTED, ASCENDING, DESCENDING} or
                // {NOT_SORTED, DESCENDING, ASCENDING} depending on whether shift is pressed.
                status = status + (e.isShiftDown() ? -1 : 1);
                status = (status + 4) % 3 - 1; // signed mod, returning {-1, 0, 1}
                setSortingStatus(column, status);
    private static class Arrow implements Icon
        private boolean descending;
        private int size;
        private int priority;
        public Arrow(boolean descending, int size, int priority)
            this.descending = descending;
            this.size = size;
            this.priority = priority;
        public void paintIcon(Component c, Graphics g, int x, int y)
            Color color = c == null ? Color.GRAY : c.getBackground();
            // In a compound sort, make each succesive triangle 20%
            // smaller than the previous one.
            int dx = (int)(size/2*Math.pow(0.8, priority));
            int dy = descending ? dx : -dx;
            // Align icon (roughly) with font baseline.
            y = y + 5*size/6 + (descending ? -dy : 0);
            int shift = descending ? 1 : -1;
            g.translate(x, y);
            // Right diagonal.
            g.setColor(color.darker());
            g.drawLine(dx / 2, dy, 0, 0);
            g.drawLine(dx / 2, dy + shift, 0, shift);
            // Left diagonal.
            g.setColor(color.brighter());
            g.drawLine(dx / 2, dy, dx, 0);
            g.drawLine(dx / 2, dy + shift, dx, shift);
            // Horizontal line.
            if (descending) {
                g.setColor(color.darker().darker());
            } else {
                g.setColor(color.brighter().brighter());
            g.drawLine(dx, 0, 0, 0);
            g.setColor(color);
            g.translate(-x, -y);
        public int getIconWidth()
            return size;
        public int getIconHeight()
            return size;
    private class SortableHeaderRenderer implements TableCellRenderer
        private TableCellRenderer tableCellRenderer;
        public SortableHeaderRenderer(TableCellRenderer tableCellRenderer)
            this.tableCellRenderer = tableCellRenderer;
        public Component getTableCellRendererComponent(JTable table,
                                                       Object value,
                                                       boolean isSelected,
                                                       boolean hasFocus,
                                                       int row,
                                                       int column)
            Component c = tableCellRenderer.getTableCellRendererComponent(table,
                    value, isSelected, hasFocus, row, column);
            if (c instanceof JLabel) {
                JLabel l = (JLabel) c;
                l.setHorizontalTextPosition(JLabel.LEFT);
                int modelColumn = table.convertColumnIndexToModel(column);
                l.setIcon(getHeaderRendererIcon(modelColumn, l.getFont().getSize()));
            return c;
    private static class Directive
        private int column;
        private int direction;
        public Directive(int column, int direction)
            this.column = column;
            this.direction = direction;
}any input will be appreciated.
thanks
Peter

The code you posted doesn't help us at all. Its just a duplicate of the code from the tutorial. The custom code is what you have written. For example do you update the TableModel from the Event Thread? Do you update the SortModel or the DefaultTableModel? If you actually provide your test code and somebody has already downloaded the sort classes, then maybe they will test your code against the classes. But I doubt if people will download the sort classes and create a test program just to see if they can duplicate your results (at least I know I'm not about to).

CRM 2013 error when adding a new appointment in Outlook.

When added
NEW DEADLINE The outlook on the calendar, I received an
error in CRM.
/////ERROR//////////////////////////////////////////////////////////////////////////////////////////
[2015-03-05 09:20:34.403] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(String message, Int32 errorCode) ilOffset = 0x5
at SecurityLibrary.RetrievePrivilegeForUser(IUser user, Guid privilege, ExecutionContext context) ilOffset = 0x14B
at SecurityLibrary.TryCheckPrivilege(Guid user, Guid privilege, ExecutionContext context) ilOffset = 0x3D
at SecurityLibrary.TryCheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x42
at SecurityLibrary.CheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x0
at AddressManager.GetOwnerCandidate(AddressEntry addressEntry) ilOffset = 0x50
at AddressResolver.BuildResolvedAddressEntry(AddressCategory category, BusinessEntity businessEntity, Guid& objectId, Boolean active, String emailAddressMatched) ilOffset = 0x58
at AddressResolver.GetPrunedList(BusinessEntityCollection responseCollection, AddressCategory category, Hashtable removeDuplicateFilter) ilOffset = 0x6B
at AddressResolver.DoResolve(AddressEntry[] addressEntriesToResolve, Int32[] objectTypes, Boolean matchPartialEmailAddresses) ilOffset = 0x70
at AddressManager.ResolveEmailAddressInternalHelper(String emailAddresses, Int32[] objectTypeCodes) ilOffset = 0x1F
at CommunicationActivityServiceBase.ResolveUnresolvedParties(BusinessEntityCollection parties, Int32[] objectTypes, ExecutionContext context) ilOffset = 0x5C
at AppointmentService.Book(BusinessEntity entity, ExecutionContext context) ilOffset = 0x3D
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at   ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
[2015-03-05 09:20:34.572] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Platform.Sdk |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | VersionedPluginProxyStepBase.Execute
ilOffset = 0x65
>Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
   at Microsoft.Crm.Extensibility.InternalOperationPlugin.Execute(IServiceProvider serviceProvider)
   at Microsoft.Crm.Extensibility.V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context)
   at Microsoft.Crm.Extensibility.VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context)
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
   at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
   at System.Globalization.CultureInfo..ctor(Int32 culture)
   at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
   at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.579] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(Exception innerException, Int32 errorCode, Object[] arguments) ilOffset = 0xB
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at   ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
   at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
   at System.Globalization.CultureInfo..ctor(Int32 culture)
   at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
   at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.580] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Platform |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | MessageProcessor.Execute
ilOffset = 0x1C5
>MessageProcessor fail to process message 'Book' for 'appointment'.
[2015-03-05 09:20:34.581] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread:   28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertToFault
ilOffset = 0x69
>UNEXPECTED: no fault?
[2015-03-05 09:20:34.582] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread:   28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertMessageAndErrorCode
ilOffset = 0x23B
>System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier.
>   at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
>   at System.Globalization.CultureInfo..ctor(Int32 culture)
>   at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
>   at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
/////END ERROR//////////////////////////////////////////////////////////////////////////////////////////
And then the
date of the duplicates in the calendar
in Outlook and CRM.
My version CRM 2013 -
6.1.2.112
Crm2013wasthemigratedfromthe
2011 version.
Does anyone have any idea how to
solve it.

I checked it, these errors
occur on all users. Below
the main errors that occur.
Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
MessageProcessor fail to process message 'Book' for 'appointment'.
System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier.

TableAdapter Configuration Wizard gives error when adding new TableAdapter

Hi,
I recently downloaded and installed the ODT for visual studio on my computer. I am running VS2008 on Windows 7 64-bit. I am able to create an ODP.NET connection to the Oracle XE 10.2g instance that is running on my computer with no problems and use that connection to browse the database. When I add a DataSet to my project, and start adding TableAdapters to the DataSet, I am getting errors. In an attempt to figure out what the problem is, I have followed various scenarios. I will describe each scenario, and what the end result is, and then after I have described them all, I will explain what I think the problem might be. Here are the different scenarios I have used:
Scenario 1:
From the Server Explorer, highlight ALL of the tables in my schema and drag them to the designer (all table adapters are added with no issues). I can add additional queries to each of the TableAdapters and then change the additional queries by right clicking and choosing "Configure". This all works with no issues. However, on certain TableAdapters, if I try to modify the primary query (Fill,GetData()), I can open the query editor just fine, change various settings, etc, but when I click on "Finish" I get the following error:
Configure TableAdapter TABLENAME failed.
Index was outside the bounds of the array.
Scenario 2:
From the Server Explorer, drag tables from my schema onto the designer one at a time. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to merge object(s).
Index was outside the bounds of the array.
Scenario 3:
On the Dataset Designer, add tables one at a time by right clicking and choosing "Add -> TableAdapter" and then using SQL to define the query for each table. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to add TableAdapter.
Index was outside the bounds of the array.
Ok... now that I have described all of the different scenarios, I will explain what I think the problem is, and why. Based on my research, I believe the underlying problem has to do with Foreign Key Constraints on the various tables. While working on Scenarios 2 & 3, the same exact tables worked just fine in both scenarios. When I started looking at the definitions for the tables in my schema, it turns out that all of the tables that failed had foreign key constraints defined. When I remove the FK constraints from a table, I am then able to add it to my dataset and change the default query with no problems. My original application used the System.Data.OracleClient provided by Microsoft. When adding my tableadapters using the microsoft data provider, the FK relations are automatically generated for me in the designer, but not with the Oracle Data Provider
I would be happy to provide you with the DDL that I used for creating my schema (it is not very big) if needed.
Thanks,
Jim

Sorry let me clarify some of the config a little more.
MAIL101 - Exch 2013
MAIL102 - Exch 2013
AP104 - Witness (strictly a witness nothing else on this machine)
EDGE01 - Exch 2007 Edge
CAS01 - Exch 2007 Hub/CAS load balancer for CAS02/03
CAS02 - Exch 2007 Hub/CAS
CAS03 - Exch 2007 Hub/CAS
MBOX01 - Exch 2007 Mail cluster
MBOX02 - Exch 2007 Mail cluster node
MBOX03 - Exch 2007 Mail cluster node
RDC01, RDC02, RDC03 - all 2008 R2 root domain controllers for rootdomain.rootdomain
DC01, DC02, DC03, DC04 - all 2008 R2 domain controllers for us.rootdomain.rootdomain
All DCs are Global Catalogs.
I can ping all DCs and root DCs fromboth MAIL101 and 102
The Exchange Replication service is running on both MAIL101 and 102.
DC03 is in the same site as the MAIL101/102 servers so I'll run all replication tests from here.
DCDIAG comes back with all tests passed.
repadmin /replsum comes back with 0 fails and no errors largest delta for any intersite communication is 13min.
When I run Test-ReplicationHealth -Identity MAIL101 and also 102 they both come back as everything passed. No errors.

Error while adding the app in the sharepoint(2013) page through powershell script

Hi,
    I have created one powershell script to uninstall and install the sharepoint 2013 apps. The code is working fine, but after adding the app in the page I am getting the error "
Internet Explorer can not display the webpage".
If I am deploying the app through Visual Studio, its getting deployed successfully and I am getting an option to trust the app.And I am able to add it in the page. But this permission is not coming when I am installing the app using power shell.
Please let me know whether to do any modifications to the power shell script.
Thanks.
Pradeep

Hi,
   We are using sharepoint hosted app.
Below is the script to uninstall and install the app.
cls
Add-PSSnapin Microsoft.SharePoint.PowerShell –ea SilentlyContinue
# uninstall the app
Write-Host "uninstallation of app"
$InstalledSPApps = Get-SPAppInstance -Web "http://mySharepointSite.xyz.com"
$appToUninstall = $InstalledSPApps | where {$_.Title -eq 'myCustomSharepointApp'}
if ($appToUninstall -ne $null)
    Uninstall-SPAppInstance -Identity $appToUninstall ;
    Write-Host "uninstalled successfully"
# Import-SPAppPackage
Write-Host "Import the app"
pause
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::RemoteObjectModel);
$myspapp = Import-SPAppPackage -Path "D:\SharePoint 2013\AppsSolution\myCustomSharepointApp.app" -Site "http://mySharepointSite.xyz.com" -Source $sourceApp ;
Write-Host "Enter to install the app"
pause
$app = Install-SPApp -Web "http://mySharepointSite.xyz.com" -Identity $myspapp;
$AppName = $app.Title;
Write-Host "app '$AppName' registered"
pause
$appInstance = Get-SPAppInstance -Web "http://mySharepointSite.xyz.com" | where-object {$_.Title -eq $AppName};
$counter = 1;
$maximum = 150;
$sleeptime = 2;
Write-Host -ForegroundColor White "Please wait..." -NoNewline;
pause
while (($appInstance.Status -eq ([Microsoft.SharePoint.Administration.SPAppInstanceStatus]::Installing)) -and ($counter -lt $maximum))
    Write-Host "." -NoNewline;
    sleep $sleeptime;
    $counter++;
    $appInstance = Get-SPAppInstance -Web "http://mySharepointSite.xyz.com" | where-object {$_.Title -eq $AppName}
pause
if ($appInstance.Status -eq [Microsoft.SharePoint.Administration.SPAppInstanceStatus]::Installed)
    Write-Host "The App was successfully installed.";
    $appUrl = $appInstance.AppWebFullUrl;
    Write-Host -ForegroundColor White "The App is available at '$appUrl'.";

New HNSC displays error when adding an app

Similar Messages

Maybe you are looking for