New import map in existing VRF

Hello,
On my PE, I defined a VRF. My VRF contains routes. Now, I want to create/modify a import map to filter/modify some routes. All new routes will pass through the new import map but not old ones. How can I do to reapply this route-map to all existing routes with the lowest impact ?
I know some commands to do it, but I'm looking for the best one for a live network.
For example, I perform following command :
no route-target import X:Y and route-target import X:Y but I'm not sure it's the best one. It's worked.
Rgds,
Xavier

doesn't seem to work.
But actually I think it's automatic without any command. The bgp scan-time IMPORT timer seems to do the job.
Xavier

Similar Messages

Qualified Updated Selections not Saved in Import Map

Hello,
I create a new Import Map and Set the Qualified Update setting on a qualified table. When I reopen the map, the Qualified Update option is saved but not the selections for the qualified update. The defaults are saved: all fields are selected as matching qualifers. Create = blank, Existing = blank.
I have tried to recreate a new map and get the same results. Any ideas?
thanks
Tammi

Hi Tammi,
could you pls elaborate on the exact issue a bit more?
Reg,'
Bis

IP VRF to VRF Definition Import-Map behaviour changes

Have the import rules changed from IP VRF syntax (IPV4 only) to VRF Definitions (IPV4&6)?
The issue being we have a management VRF which is used for access, monitoring, archiving. which works well in the IP vrf sytnax example:
ip vrf A-IPVPN
rd 9282:1002
import map Customer-Mgmt-Infrastructure
route-target export 9282:1002
route-target import 9282:1002
route-target import 9282:1999
ip vrf Customer-Mgmt
rd 9282:1999
import map Import-Customer-Mgmt
route-target export 9282:1999
route-target import 9282:1999
route-target import 9282:2010
route-target import 9282:1002
route-target import 9282:2011
route-target import 9282:1005
route-map Import-Customer-Mgmt permit 10
match ip address prefix-list Customer-Mgmt-CPE
ip prefix-list Customer-Mgmt-CPE: 2 entries
seq 5 deny 169.254.254.0/24
seq 10 permit 169.254.0.0/16 le 32
This allows all PE's to learn Customers Routes and import and export management details, I believe I have followed best practice and the result is what I would expect, however since creating some new customers with the vrf definition syntax it appears that the Import-Customer-Mgmt now filters out BGP routes within the Local VRF PE-PE, however the the routes are visible via :
show ip bgp vpnv4 rd
but not imported into BGP table.
Vrf definition
rf definition S-C-IPVPN
rd 9282:1005
route-target export 9282:1005
route-target import 9282:1005
route-target import 9282:1999
address-family ipv4
import map Customer-Mgmt-Infrastructure
exit-address-family
After hitting my head against a wall for longer than I would like to admit, I removed the import map and routes in the RD are installed into the BGP Table?
My question is, is this now default behaviour or is it a bug in our particular version (asr1002x-universalk9.03.09.01.S.153-2.S1.SPA.bin)
I had been considering upgrading our syntax using the vrf upgrade-cli, glad i didnt as this would have caused a major outage as we use the a fair amount of import maps with our Internet transit circuits.
If this is normal behaviour what it the best way to match and permit Local vrf RD? baring in mind I would like ideally to reuse the same route-map.
I will continue to investigate, but if anyone has had experience of this behaviour I would appropriate there input
Regard Neil

The following route map has no impact:
route-map Customer-Mgmt-Infrastructure-2 permit, sequence 10
Match clauses:
    community (community-list filter): S-C-IPVPN
Set clauses:
Policy routing matches: 0 packets, 0 bytes
Named Community expanded list S-C-IPVPN
    permit RT:9282:1005
Think i will need to lab up.
Neil

How do I merge new imported photos into an existing event?

How do I merge new imported photos into an existing event while using the latest version of iPhoto?

You can merge two Events simply by dragging one to the other.
You can move photos between Events by drag and drop or by first flagging them, then switching to Events View and selecting the target Event and going Events Menu -> Add Flagged Photos to selected Event.

When importing iPad photos into Aperture, I cannot import into an existing album, only create a new project.

I dont want to create a new project for every group of photos being brought over from my iPad. My iPhone worked perfectly. I was able to choose which project/album I could import into, why would the iPad, running the same iOS, be any different?

Hi Dave,
Welcome to the user-support Aperture discussion forum.
You would probably benefit from reading Kirby's introduction: [http://discussions.apple.com/messageview.jspa?messageID=13124533&stqc=true]
Is there any way to simply import photos into those albums without having to create all of those annoying projects?
That's a loaded question. It's not "yes or no" according to exactly how you asked it.
You do not have to create a new project for each import, but every picture lives in exactly 1 project. You can then point to any photo from any number of albums. You cannot put a photo directly into an album because an album does not contain photos, it only contains "pointers" to photos.
So, you, as the user, have the ability to put your imports into an existing project. Why are you creating a new project every time?
nathan

Why is it impossible to import pics into existing projects in Aperture 3.6 ? It forces me to create a new project on every import. Tried to change that in preferences but no luck.

Why is it impossible to import pics into existing projects in Aperture 3.6 ? It forces me to create a new project on every import.
Tried to change that in preferences but no luck.

It is working for me. Two ways to import into an existing project:
Select a project and view it in the browser in split view. If you drag image files from a folder directly into the filmstrip, the dragged image files will be added to that project.
Or select a project in the library, before you open the Import panel. Then you can switch the destination project in the Import Settings from "new Project" to the selected project.
Have you tried these methods? Where does it not work for you?

Is it possible to import a new hierarchy into an existing version?

I want to add a new hierarchy to an existing version . Is it possible to do via import process?

The import process by definition always creates its own version. The process to incorporate a new hierarchy int an existing version is as follows:
1. Create the IMPORT and run the import into a new version that you specify.
2. Validate that the hierarchy in the new version is as you want it.
3. Create a BLENDER and run the blend using the new version as the source and the version you want as the target. Make sure you blend the properties that you created during the import process as well.
4. Validate that the BLEND was successful into the working version you wanted it to go and that the properties and structure are as you want them.
5. Delete the new version you created in steps 1&2 above.
Following these steps will incorporate the new hierarchy into whatever existing working version you want.

Update MDM Import Map

Hello...
I am a PI consultant who inherited MDM recently.
MDM 5.5, SP06
My issue is that I have an existing map that works fine, but the source schema is changing to add a few new fields. I need to map the new fields to my existing catalog repository.
I had to import the revised schema under a unique name (v2 suffix). Then I assumed I could just change the source schema in my existing map, but that does not look possible. What is the best way to make such a change? I am hoping to at least copy the current mapping as nothing is changing there...just adding a few new mappings.
Thanks!
Keith
Edited by: Keith Wendel on Jun 4, 2009 10:30 AM

HI Keith
Are you talking of syndication maps?
In import maps we never put the schema. Just connect to the source file and open your old map. on top of this you can do the mappings for the delta fields and save the map with a new name.
thanks
Ravi

Value Exceptions - Import Map Update

Hello MDM Gurus,
We have the requirement to update the existing import map by unmapping two of the fields that we no longer required.
When we try unmapping the required fields and save as another map name, export, reimporting it and overwriting the existing map with the same name. But the problem is we are loosing all value mappings. we are facing issue getting loads of value exceptions as all value mappings are gone.
Please we need experts advices to resolve this since we no longer need that two fields getting imported in to the repository.
We need a solution to unmap that two fields and keep all existing value mappings.
Save Update not works for filed mappings, it only works for value mappings.
Thank you very much in advance for the suggestions and inputs.
Example :
Field1 and Field2 Unmapped, We saved the Map by Save -> we are loosing all value exceptions ( As it stores only present config)
Field1 and Field2 Unmapped, We saved the Map by Save Update -> When reimport the map again, we are seeing this field1 and field2 still mapped.
Field1 and Field2 Unmapped, We saved the map by Save As -> Still it does like First Scenario.
Please Advice.

Hi Smartsoft,
Just try this below procedure and revert with result.
1. Open the existing map.
2. Remove all the fields from matching field under Match Records tab.
3. Now unmap these two not required fields under Map Field/Value tab.
4. Afterwards, set again all the matching fields like earlier under Match records tab. Now make sure that under your Import Status tab Action Item: Ready to Import. Once it is done.
5. Now try with Save As option as a new map in order you have had existing correct map as a reference for future.
If it work properly then you can overwrite this new map name with existing map. Kindly revert.
Regards,
Mandeep Saini

Question on PI like RFC,import maps,defining two ways communication

Hi Foks,
I am new to PI need information on the below issues.
1.How we can use RFC?
2.How to define Two way Communication eg:Remote system to ERP vise versa.
4.How ti transport the dev. object from Dev to Prod.
5.How we ca create the maps externally and import in PI is there any way we can do it.
Please help me out
shankar

How we can use RFC?
Import RFC in ESR/IR under IMPORTED OBJECTS that exist under software component in your ESR.
While importing RFC,you have to give system details from where you will import RFC in PI.
How ti transport the dev. object from Dev to Prod.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
thanks
Nidhi

How do I import Map Info Tab files into Spatial for a map of europe?

How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
Any Help welcome :|
Tim

Tim,
MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
Andy Greis
CompuTech Inc.

Can we add a new attachment to an existing SC from any other custom page in SoCo PO View

Hi Experts,
Need your expert advice on the below requirement.
We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size etc are not stored properly in DB.
in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is attachment is partially updated.
Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content of new attachment in existing attachment internal table and calling above FM for update.
Can we add new attachment outside SC to existing SC ? if yes , then how?
Thanks,
Partha

Hi Partha,
Please post this query in the category: SAP SRM. Your post currently shows up on the forum - SRM User Interface Add-on. As your query is not related to the new ad-on, you might not get as many responses in this forum as you would have if you had posted the query in the general SRM forum (http://scn.sap.com/community/srm).
Hope this helps
Cheers,
Yateesh

New import parameter ATPCHECK to be added in func module - IMPACT?

Hi !
We are in the Realization phase of implementing SAP CRM, and also undercone a ECC 6.0 migration 3 months back. We are faced with the foll problem....
Whenever a reservation is to be created from the CRM system a functional module u2018'CRM_SRV_LOG_PROCESS_RSRV' is called in the ERP system. Within this functional module, another functional module u2018MB_RESERVATION_CREATE_INTERNALu2019 is called. It is this functional module which actually creates a reservation and performs ATP check.
In the ECC system a new import parameter ATPCHECK has been added in u2018MB_RESERVATION_CREATE_INTERNALu2019 functional module and this is not filled whereas in R/3 this parameter does not exist at all.
This parameter needs to hold a value X for ATP to happen in THE ECC system.
It is proposed to fix this problem by adding the parameter ATPCHECK with value X in the functional module 'CRM_SRV_LOG_PROCESS_RSRV' when 'MB_RESERVATION_CREATE_INTERNALu2019 is called.
We have not modified any function modules so far, hence would like to know...
1. Whether the proposed solution is correct?
2. What would be the imact (things to watch out for) while carrying out changes in the function module?
Would be grateful to get a reply.
Thanks & Regards,
Ajeetha.

Hello
I have referred to the systems ECC 6.0 and SAP 4.7. In SAP 4.7, function module MB_RESERVATION_CREATE_INTERNAL never had ATP check inbuilt. See below:
***************Start if Snap from 4.7*********************
FUNCTION mb_reservation_create_internal.
""Lokale Schnittstelle:
*" IMPORTING
*"     REFERENCE(I_RKPF) LIKE RKPF STRUCTURE RKPF
*"     REFERENCE(TESTRUN) TYPE BAPI2093_TEST OPTIONAL
*" EXPORTING
*"     REFERENCE(RESERVATION) TYPE BAPI2093_RES_KEY-RESERV_NO
*" TABLES
*"      IT_RESB STRUCTURE RESB
*"      PROFITABILITYSEGMENT STRUCTURE BAPI_PROFITABILITY_SEGMENT
*"      RETURN STRUCTURE BAPIRET2
comments:
- no availibility check*
- no field selection*
- no calender check*
***************End of Snap from 4.7*********************
This is additional functionality provided in ECC 6.0 by giving additional parameters:
***************Start if Snap from ECC6*********************
FUNCTION MB_RESERVATION_CREATE_INTERNAL.
""Lokale Schnittstelle:
*" IMPORTING
*"     REFERENCE(I_RKPF) LIKE RKPF STRUCTURE RKPF
*"     REFERENCE(TESTRUN) TYPE BAPI2093_TEST OPTIONAL
*"     REFERENCE(ATPCHECK) TYPE BAPI2093_ATPCHECK OPTIONAL
*"     REFERENCE(CALCHECK) TYPE BAPI2093_CALCHECK OPTIONAL
*"     REFERENCE(RESERVATION_EXTERNAL) TYPE BAPI2093_RES_KEY-RESERV_NO
*"       OPTIONAL
*" EXPORTING
*"     REFERENCE(RESERVATION) TYPE BAPI2093_RES_KEY-RESERV_NO
*" TABLES
*"      IT_RESB STRUCTURE RESB
*"      PROFITABILITYSEGMENT STRUCTURE BAPI_PROFITABILITY_SEGMENT
*"      RETURN STRUCTURE BAPIRET2
***************End of Snap from ECC6*********************
So, I think there should not be any change which need to be made to these function modules.
Thanks
Amol Lohade

How to create new or delete the existing row in the grid....

hi my friends...
i am developing report using Reuse_alv_grid_display...
my requirement is... At runtime
          1. i may create new row on the grid (empty row inwhich i may enter the data).
          2. i may delete a existing row in the grid
          3. i may edit the existing data...
then i have to trace the modification in the grid in one internal table...
how can i get into this.....
note:
i have some idea to edit the existing record in the grid and trace those modification,
but i don't know abt how to create new or delete the existing row....
can you give me some idea...

Hi deva,
write a class which implemets these methods
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
To handle the toolbar on alv
     handle_toolbar
       FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING e_object e_interactive,
To handle the buttons on the alv grid
     handle_user_command
       FOR EVENT user_command OF cl_gui_alv_grid
       IMPORTING e_ucomm.
endclass.
Now Implement these methods.
CLASS lcl_event_receiver IMPLEMENTATION.
To handle the toolbar on alv
METHOD handle_toolbar.
   DATA ls_toolbar TYPE stb_button.
    CLEAR gs_toolbar.
    MOVE 3 TO gs_toolbar-butn_type.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_INSERT_ROW' gs_toolbar-icon.
    MOVE text-010 TO gs_toolbar-function.
    MOVE text-012 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_DELETE_ROW' gs_toolbar-icon.
    MOVE text-011 TO gs_toolbar-function.
    MOVE text-013 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
   METHOD handle_user_command.
In this form, check the function code(e_ucomm has the function code), based on that do the required action.
as i said yesterday(i.e for appending a row, deleting a row, modifying a row)
    PERFORM user_command USING e_ucomm.
ENDMETHOD
endclass.
Before calling the alv method, create a object of this class.
DATA :
      gref_event_receiver TYPE REF TO lcl_event_receiver,
      gv_tables_alv          TYPE REF TO cl_gui_alv_grid.
      CREATE OBJECT gref_event_receiver.
      SET HANDLER   gref_event_receiver->handle_user_command
                    FOR gv_tables_alv.
      SET HANDLER   gref_event_receiver->handle_toolbar
                    FOR gv_tables_alv.
check this program for event handling, it is the similar way
demo_abap_objects_events
Hope u understood this.
Regards,
Prasant
reward if helpful

Is it ok to make changes to import map by loading files from port manually?

Hi all,
I want to load the files from the port which is set to manual and then want to create/modify existing maps already assigned to ports.Is it ok to do this way or do we need to create the import maps with all mappings manually other than port option?
Thanks

Hi Arvind,
You can load the map through port & do changes whatever you want. You can see the map name
on the header. After making changes if you want the old map also then you need to save it in a different name.
Regards,
Pramod

New import map in existing VRF

Similar Messages

Maybe you are looking for