NEW iPad 3G Not Working well in Singapore
I tested the 3G on my new iPad against iPhone 4 - The 3G is just NOT working on iPad.
I tested in more than 10 locations - home, work place and others. In many areas, the 3G is working well on iPhone 4, whereas it is non-existance or slow like a snail on the new iPad.
Please fix this Apple! Thank you.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
I have an Ipad4 and now it shows a big sceem and I can't use it any more. I did a lot of things like full restore and the Ipad keeps not work well. What can I do? Is it a hardware problem?
Look the 2 images on link below:
https://www.dropbox.com/sh/0arufrxzjwwmweu/6Fxz1LjbmdTry Settings > General > Accessibility > Zoom: OFF
Note: You may need to use 3 fingers to tap and scroll. -
Wall Charger of new iPad is not working
I just got a new Ipad 64GB and I observed that the wall charger adapter is not working.
I checked the cable and it is fine as it charges the iPad when connected to the computer USB and it syncs.
I also tried the wall power adapter of my iPhone and it works perfectly fine. It charges the iPad as expected.
Thus it is the iPad power adapter.
Anyone with this issue?I have the same problem and found a solution. I have two 16 GB ipads and several ipods around so was able to isolate that when using the sync cable provided with the ipad (the slim ones) the ipad and ipods did not charge correctly (very slowly if not at all). When using one older sync cable (fat connector) on the wall charger, the problem is gone. Unfortunately, I have juste one of those, but at least I am sure that it will work.
I also encounter sync issue with those small connectors : connections goes on and off without a predicable pattern.
So from my experience: the problem is not related to the ipad, the problem is not with the wall charger and using an older ipod sync connector solve the issue. The issue is with both usb connectors included with the ipads, so getting a new similar one is unlikely to solve the issue. -
Please help.. ios 8 in ipad 2 not working well...
Problem Ios 8 in Ipad 2, such as
-hang,
-crash,
-hang during update apps,
-bbm error,
-five fingres closing app often failed,
-slower process..
but before ios 8, ipad 2 very health well.
Apple, please fix it for ipad 2....Your iPad 2 crash and perform slow mostly because it is old, not suitable for running in iOS 8 though Apple has listed it in the compatible list. You have 2 options to improve its performance:
1st, speed up iOS 8 on your iPad. To make it, you should try software, like SafeEraser to clear junk files and deleted files. Then delete unwanted apps, text messages, photos, and more, leaving more storage on the iPad for other items. Most of all, end multiple task while starting a new task. And you should also need to reduce motion effect and transparency.
2nd, if the first way can't solve the crash and slow problem, you should consider a downgrade. Now you can downgrade iPad 2 from iOS 8 to iOS 7.1.2. but you have to do it in a hurry, because later Apple may close the verifying process for iOS 7. Here are steps:
1). Download iOS 7.1.2 firmware according to your iPad model. there are multiple websites offering the download. Google it by yourself
2). Make sure you have install the latest version of iTunes.
3). Connect your iPad to computer via a USB cable.
4). After detected, your iPad will be shown in the left column. Click it to show the control panel.
Note: Make sure you have backups of your iPhone 4S. if not, backup it now.
5). Under Summary tab,hold on Shift key for Windows (Option key for Mac )and click Restore iPad...
6). In the pop-up window, find the firmware on your computer and click Open. Then, iTunes will downgrade your iPad to iOS 7.1.2. -
New iPad is not working for iMessage and FaceTime ?? Help
Just purchased the new iPad today it will not let me sign on to iMessage and FaceTime but I am connected on wifi .... Help.
Using FaceTime
http://support.apple.com/kb/ht4319
Trouble-shooting FaceTime
http://support.apple.com/kb/TS3367 -
My new ipad do not work with apple tv
The airplay is not working in my ipad 3.
I am trying to connect to the apple tvDouble click in main botton but the TV do not appear.
-
New Computer--Backup not working well (Help!)
Hi All,
Have my CDs for the backup of my iTunes Library and Playlists. It is not copying over my playlists. The files are being sent to my C Driver, but the playlists are not there. Is that normal?
I also do not see all my apps on the new itunes.
Help!
ThanksIn my opinion, the itunes backup to CD/DVD is very poor. Plus, if you take the trouble to test it and try to restore before you actually need to restore, you might find that the restore does not work.
My advice is to buy an external hard drive and use that for backups.
Assuming you have the default iTunes setup, all you need to do to backup is copy the iTunes folderand all its subfolders to the exHD.
This will copy the itunesLibrary.itl file (database with play lists, ratings, playcounts), the Mobile Applications and Artwork folder, and all your artist/albums.
If you have a special iTunes setup, then you need to figure out yourself what folders you need to back up. -
The new safari is not working well
I have safari Version 4.1.1
before i updated to this version I can surf fast but recently after the new updates while surfing it takes too long for the page to open the site and if it takes too long it will say failed to open the page and cannot find server
even firefox have the same problem but before these updates i was able to surf the net normaly
every computer in my house is working good so it is not from my modem or the verizon
Thank Yousorry but i did not understand you well
my remaining space is 2.88 GB
and
these are the plugins in my safari
DivX Web Player
DivX Web Player version 2.0.2.39 — from file “DivXBrowserPlugin.plugin”.
MIME Type Description Extensions
video/divx DivX Video File divx,div
Flip4Mac Windows Media Plugin 2.3.4
The Flip4Mac WMV Plugin allows you to view Windows Media content using QuickTime. — from file “Flip4Mac WMV Plugin.plugin”.
MIME Type Description Extensions
video/x-ms-wm Windows Media Video wm
video/x-ms-asf-plugin Windows Media Plugin
video/x-ms-asf Windows Media Video asf
audio/x-ms-wax Windows Media Playlist wax
application/asx Windows Media Plugin
video/x-ms-asx Windows Media Playlist asx
video/x-ms-wmv Windows Media Video wmv
application/x-mplayer2 Windows Media Plugin
video/x-ms-wmp Windows Media Video wmp
video/x-ms-wmx Windows Media Playlist wmx
audio/x-ms-wma Windows Media Audio wma
video/x-ms-wvx Windows Media Playlist wvx
Flip4Mac Windows Media Web Plugin 2.3.4
The Flip4Mac WMV Plugin allows you to view Windows Media content using QuickTime. — from file “Flip4Mac WMV Plugin.webplugin”.
MIME Type Description Extensions
video/x-ms-wm Windows Media Video wm
video/x-ms-asf-plugin Windows Media Plugin
video/x-ms-asf Windows Media Video asf
audio/x-ms-wax Windows Media Playlist wax
application/asx Windows Media Plugin
video/x-ms-asx Windows Media Playlist asx
video/x-ms-wmv Windows Media Video wmv
application/x-mplayer2 Windows Media Plugin
video/x-ms-wmp Windows Media Video wmp
video/x-ms-wmx Windows Media Playlist wmx
audio/x-ms-wma Windows Media Audio wma
video/x-ms-wvx Windows Media Playlist wvx
iPhotoPhotocast
iPhoto6 — from file “iPhotoPhotocast.plugin”.
MIME Type Description Extensions
application/photo iPhoto 600
Java Plug-in for Cocoa
Java Switchable Plug-in (Cocoa) — from file “JavaPluginCocoa.bundle”.
MIME Type Description Extensions
application/x-java-jnlp-file JNLP Applications jnlp
application/x-java-applet Basic Java Applets javaapplet
Kaplan Netscape Plug-In
Kaplan Netscape simple plug-in — from file “KaplanNetscapePlugIn.plugin”.
MIME Type Description Extensions
application/x-kaplanbrowser Kaplan Nestcape Plug-in kapb
Kaplan WebKit Plug-in
Kaplan WebKit plug-in that enables calls JavaScript from an Objective-C plug-in (and vice versa). — from file “KaplanWebKitPlugin.webplugin”.
MIME Type Description Extensions
application/x-kaplanbrowser Kaplan WebKit Plug-in kapb
MoveNetworks Quantum Media Player
npmnqmp 071701000001 — from file “Move-Media-Player.plugin”.
MIME Type Description Extensions
application/x-vnd.movenetworks.qm MoveNetworks Move Media Player Plug-In qmx
application/x-vnd.moveplay1.qm MoveNetworks Move Media Player Plug-In qmx
Quartz Composer Plug-In
Web Kit plug-in that renders Quartz Composer compositions. — from file “Quartz Composer.webplugin”.
MIME Type Description Extensions
application/x-quartzcomposer Quartz Composer Composition qtz
QuickTime Plug-In 7.6.4
The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site. — from file “QuickTime Plugin.webplugin”.
MIME Type Description Extensions
image/x-targa TGA image targa,tga
image/x-tiff TIFF image tif,tiff
image/x-pict PICT image pict,pic,pct
image/tiff TIFF image tif,tiff
image/x-png PNG image png
audio/x-mpeg3 MP3 audio mp3,swa
audio/vnd.qcelp QUALCOMM PureVoice audio qcp,qcp
image/x-sgi SGI image sgi,rgb
audio/x-gsm GSM audio gsm
audio/ac3 AC3 audio ac3
audio/aiff AIFF audio aiff,aif,aifc,cdda
audio/x-mpeg MPEG audio mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-wav WAVE audio wav,bwf
video/avi Video For Windows (AVI) avi,vfw
audio/x-ac3 AC3 audio ac3
audio/x-aiff AIFF audio aiff,aif,aifc,cdda
image/png PNG image png
image/x-bmp BMP image bmp,dib
video/x-mpeg MPEG media mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
audio/mid MIDI mid,midi,smf,kar
image/pict PICT image pict,pic,pct
video/quicktime QuickTime Movie mov,qt,mqv
application/sdp SDP stream descriptor sdp
audio/x-midi MIDI mid,midi,smf,kar
audio/x-aac AAC audio aac,adts
audio/midi MIDI mid,midi,smf,kar
video/sd-video SD video sdv
video/x-m4v Video (protected) m4v
video/3gpp2 3GPP2 media 3g2,3gp2
image/x-jpeg2000-image JPEG2000 image jp2
image/jpeg2000 JPEG2000 image jp2
video/mp4 MPEG-4 media mp4
application/x-mpeg AMC media amc
image/x-macpaint MacPaint image pntg,pnt,mac
video/flc AutoDesk Animator (FLC) flc,fli,cel
image/x-quicktime QuickTime image qtif,qti
image/jp2 JPEG2000 image jp2
audio/mp4 MPEG-4 media mp4
audio/x-mp3 MP3 audio mp3,swa
audio/amr AMR audio amr
video/mpeg MPEG media mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
audio/3gpp2 3GPP2 media 3g2,3gp2
image/jpeg2000-image JPEG2000 image jp2
audio/basic uLaw/AU audio au,snd,ulw
video/3gpp 3GPP media 3gp,3gpp
audio/aac AAC audio aac,adts
audio/mpeg MPEG audio mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-m4p AAC audio (protected) m4p
audio/x-m4a AAC audio m4a
application/x-rtsp RTSP stream descriptor rtsp,rts
audio/3gpp 3GPP media 3gp,3gpp
audio/wav WAVE audio wav,bwf
video/x-msvideo Video For Windows (AVI) avi,vfw
audio/x-m4b AAC audio book m4b
audio/x-caf CAF audio caf
video/msvideo Video For Windows (AVI) avi,vfw
application/x-sdp SDP stream descriptor sdp
audio/mpeg3 MP3 audio mp3,swa
audio/mp3 MP3 audio mp3,swa
QuickTime Plug-in 7.6.4
The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site. — from file “QuickTime Plugin.plugin”.
MIME Type Description Extensions
image/x-targa TGA image targa,tga
image/x-tiff TIFF image tif,tiff
image/x-pict PICT image pict,pic,pct
image/tiff TIFF image tif,tiff
image/x-png PNG image png
audio/x-mpeg3 MP3 audio mp3,swa
audio/vnd.qcelp QUALCOMM PureVoice audio qcp,qcp
image/x-sgi SGI image sgi,rgb
audio/x-gsm GSM audio gsm
audio/ac3 AC3 audio ac3
audio/aiff AIFF audio aiff,aif,aifc,cdda
audio/x-mpeg MPEG audio mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-wav WAVE audio wav,bwf
video/avi Video For Windows (AVI) avi,vfw
audio/x-ac3 AC3 audio ac3
audio/x-aiff AIFF audio aiff,aif,aifc,cdda
image/png PNG image png
image/x-bmp BMP image bmp,dib
video/x-mpeg MPEG media mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
audio/mid MIDI mid,midi,smf,kar
image/pict PICT image pict,pic,pct
video/quicktime QuickTime Movie mov,qt,mqv
application/sdp SDP stream descriptor sdp
audio/x-midi MIDI mid,midi,smf,kar
audio/x-aac AAC audio aac,adts
audio/midi MIDI mid,midi,smf,kar
video/sd-video SD video sdv
video/x-m4v Video (protected) m4v
video/3gpp2 3GPP2 media 3g2,3gp2
image/x-jpeg2000-image JPEG2000 image jp2
image/jpeg2000 JPEG2000 image jp2
video/mp4 MPEG-4 media mp4
application/x-mpeg AMC media amc
image/x-macpaint MacPaint image pntg,pnt,mac
video/flc AutoDesk Animator (FLC) flc,fli,cel
image/x-quicktime QuickTime image qtif,qti
image/jp2 JPEG2000 image jp2
audio/mp4 MPEG-4 media mp4
audio/x-mp3 MP3 audio mp3,swa
audio/amr AMR audio amr
video/mpeg MPEG media mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
audio/3gpp2 3GPP2 media 3g2,3gp2
image/jpeg2000-image JPEG2000 image jp2
audio/basic uLaw/AU audio au,snd,ulw
video/3gpp 3GPP media 3gp,3gpp
audio/aac AAC audio aac,adts
audio/mpeg MPEG audio mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-m4p AAC audio (protected) m4p
audio/x-m4a AAC audio m4a
application/x-rtsp RTSP stream descriptor rtsp,rts
audio/3gpp 3GPP media 3gp,3gpp
audio/wav WAVE audio wav,bwf
video/x-msvideo Video For Windows (AVI) avi,vfw
audio/x-m4b AAC audio book m4b
audio/x-caf CAF audio caf
video/msvideo Video For Windows (AVI) avi,vfw
application/x-sdp SDP stream descriptor sdp
audio/mpeg3 MP3 audio mp3,swa
audio/mp3 MP3 audio mp3,swa
RealPlayer Plugin.plugin
RealPlayer Plugin — from file “RealPlayer Plugin.plugin”.
MIME Type Description Extensions
audio/x-pn-realaudio-plugin RealMedia rm
audio/x-pn-realaudio RealPlayer Metafile ram
Shockwave Flash
Shockwave Flash 10.1 r53 — from file “Flash Player.plugin”.
MIME Type Description Extensions
application/x-shockwave-flash Shockwave Flash swf
application/futuresplash FutureSplash Player spl
Silverlight Plug-In
4.0.50524.0 — from file “Silverlight.plugin”.
MIME Type Description Extensions
application/x-silverlight-2 Microsoft Silverlight xaml
application/x-silverlight Microsoft Silverlight xaml
Verified Download Plugin
Verified Download Plugin — from file “VerifiedDownloadPlugin.plugin”.
MIME Type Description Extensions -
New iPad control surface working well
I am not affiliated with this company.
This app just launched and it is working incredibly well with Premiere so far. Not only does it have a control surface with soft buttons for editing and playback, but it will do gestures (mark in with a 1 finger swipe, insert with 3 finger swipe, etc..)
Just thought it would be of note to the Pr community for those who are looking for an interesting way to interact with Premiere beyond mouse and keyboard.
http://ctrlconsole.comIt sounds like a hardware issue. Contact Apple Support. Here's how:
See all worldwide telephone support numbers -
Ipad A1430 was referred to as the new ipad- sound not working.
Hi
I have had a problem that happened over the weekend, when I used airplay with my ipad.
The sound on my iPad seams to be wirelessly connecting to auxiliary sound systems is fine but the iPad refuses to acknowledge my iPad speaker.
-the scroll bar for adjusting volume and turning on wifi b/tooth screen brightness there is a choice of which "air" products you want to sync sound with hand comparing to another iPad there should be an option for not choosing a wireless connection. It the attached iPad speaker.
I have restarted it apple button and lock. Also reset network settings and turned everything off for a 10minute cool down and restarted again.
Thanks any help would be grandVerify that your iPad has Retina Display.
If your iPad has the 30 pin dock connection, you may refer to it as iPad 3rd Generation.
If your iPad has the lightning dock connection, you may refer to it as iPad 4th Generation. -
The home button of my IPAD did not work well.
From awhile the home button doesn't work properly. I have already upgraded the system to 4.3.3, and It doesnt get fixed. Suddenly you have to press 10 times to make it works. Some times it work fine but some times it doesn't. Can someone help me?
Sounds like it might be a hardware problem. I'd take it back to Apple store, or place of purchase to check.
-
The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?
I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
It is kind of a drag because you wil have to retweak everything but it's helped for some. -
All of my apps on my new ipad2 are not working. I had this iPad about 4 months and nothing bad has happened before this. I need help on how to make my apps stop crashing. All my built in apps are fine though. WHATBCAN I DO TO MAKE MY APPS STOP CRASHING. I ALREADY TURNED IT OFF THEN ON AGAIN AN IT STILL CRASHES. HELPPP!!!!
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs
I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
Has anyone else run into similar issues?
Robbie Gilbert
[email protected]I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
In conclusion, I wish I had chosen another UI technology for our new product client, and may yet. -
the browser Working very slowly at the first time open or when i open a new link
And not as well as by
And I have Operating system xp sp3 Updated
And i get Stop in the script'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit)
Maybe you are looking for
-
Calling a web service from within PLSQL
Hello ! I am trying to activate a web service located on a remote machine inside a database trigger . This WSDL has been generated by a XI (SAP) tool and located on the server on which the XI is installed. XI is an EAI tool a product that is included
-
I’m brand new to iTunes. I currently have a Creative Labs mp3 player, which I like a lot. Two days ago I bought the 80 gig iPod Classic, which seems to be a very nice unit. I had resisted iPods due to the proprietary nature of everything. After talki
-
Equium A110-276: Do I need to update BIOS when Vista was installed?
I do know where to post this... "I have clean installation of Windows Vista on my Equium A110-276. Do I need to update the BIOS or not? Does Updating BIOS Compulsory/mandatory?
-
Cube with aggregation more slow that a cube without aggregation
Hi, I have a SSAS 2012 database that I am trying to tune to give more performance. I improve several best practices like define attribute relationships between attributes and also create aggregations (with bids helper) to try so tune the speed of the
-
Can we call sel scr in top of page
Hi all, Is it possible to call or to put selection screen in top of page in any report viz. classical or alv or ldb etc