New line in a text field

Hi,
I have a requirement to display the information like below (in different lines) in a text(long) field, its just plain text.
Firstname\Last name:
Address:
State:
Zipcode:
How can i write this in Default value? i tried to use '\n' for a new line, it did not work. Any ideas?

This can be done by crateing a blank filed and then selecting it.
Follow below steps.
Admin >> Application Cutomisation >> Record Type Setup >> Select Record >> New Field
Select Field type as Web Link , Check Read Only, Hold ALT while type 255
Thanks...VK
Edited by: 793773 on Sep 12, 2010 11:40 PM

Similar Messages

Text continues moving horizontally rather than starting a new line in editable text field

I am trying to make a feed backbox for visitors on my website. I have made the editable text field and scroll bar and set all of my preferences, but when the typing reaches the border on the right of the text field it just continues to type further horizontaly. I can start a new line by pressing enter but I would like it to start a new line on its own when it reaches the boundary. Any help is appreciated.

assign your textfield's wordWrap property to true.

How to start a new line in a text field?

I tried the following formula to break for a new line but it is not working.
stringvar notes;
stringvar newline;
newline := chr(100);
replace (notes := {HNO_NOTE_TEXT.NOTE_TEXT}, "\r\n", newline);
Any suggestions?

How could I accomplish the following.?
Current data in the column.
PREOPERATIVE DIAGNOSES: 1. Right shoulder rotator cuff tear. 2. Right shoulder biceps tendon disease with superior labral tearing. POSTOPERATIVE DIAGNOSES: 1. Right shoulder rotator cuff tear. 2. Right shoulder biceps tendon disease with superior labral tearing. SURGEON: Jane, Doe, MD ASSISTANT: Jane, Doe, PA-C and Bob, Doe MD, orthopedic resident. The assistance of a physician's assistant was required for limb positioning and placement of anchors. ANESTHETIC: Interscalene block plus general. DRAINS: None. COUNTS: Sponge and needle count were correct. MATERIAL FORWARDED TO THE LABORATORY: None. OPERATION PERFORMED: 1. Right shoulder arthroscopic rotator cuff tear. 2. Right shoulder open subpectoral biceps tenodesis. 3. Right shoulder subacromial decompression with acromioplasty. 4. Right shoulder extensive glenohumeral debridement.
I would like the following in MS Excel. I would like to pull the header out into a separate column.
Header
NOTE_TEXT
PREOPERATIVE DIAGNOSES:
1. Right shoulder rotator cuff tear. 2. Right shoulder biceps tendon disease with superior labral tearing.
POSTOPERATIVE DIAGNOSES:
1. Right shoulder rotator cuff tear. 2. Right shoulder biceps tendon disease with superior labral tearing.

Records are not getting imported due to new line charactor in the field

Dear All,
I am trying to load a file into target but the import is failing. The error thrown is as below;
During the import of leads into CRMoD through loading the New lead/Step lead file received from CA, leads have not been imported and we encountered the following
error message:
"Import field 'LAST_NAME' had a blank value for the required Oracle CRM On Demand field 'Last Name'. This record was not imported. Please enter desired values for
the required fields and re-import this record."
Reason:
Leads are not imported due to an additional new line (Enter) character, which results in the subsequent lines not being picked up and the error of import failure.
Please help me to resolve this to remove the new line charactor in the field so that import succeeds..
By the way, I am working on ODI 11g.
Thanks in Advance
Regards
Santy

While i was reading your post i remembered an issue that madded me. I don't know Oracle CRM, but a possible workaround could be to create a temporary Oracle table and load all data inside it. After that load in CRM only valid rows.

CLIENT_TEXT_IO : cannot insert new line into a text file

Facts:
Developer 10g
AS 10g
Web utility
Problem:
i am traying to
Open a text file. using CLIENT_TEXT_IO.FOPEN
insert a record in to a text file using CLIENT_TEXT_IO.PUTF
insert a new line using chr(10) or CLIENT_TEXT_IO.NEW_LINE
or CLIENT_TEXT_IO.put_line
insert the next record
Close the file.
all work except insert a new line
Why !!!
it was Working fine in 6i, but now in 10g and Webutil is not working
plz help

Hi you can put a new line in a text file using System.getProperty("line.separator"). This implementation will work for every OS.
import java.io.*;
class Demo{
public static void main(String args[]) throws Exception {
FileWriter fr = new FileWriter("FileDemo.txt");
fr.write("AAAAAAAAAA");
fr.write(System.getProperty("line.separator"));
fr.write("AAAAAAAAAAA");
fr.close();
}

How to insert new line in a text file

hi all,
i wnat to know how can i insert a new line in a text file using java.
for example i want the formate of the text like this
1 2 3
4 5 6
until now i know only how to insert data but not new line.
Thanks in advandce

Hi you can put a new line in a text file using System.getProperty("line.separator"). This implementation will work for every OS.
import java.io.*;
class Demo{
public static void main(String args[]) throws Exception {
FileWriter fr = new FileWriter("FileDemo.txt");
fr.write("AAAAAAAAAA");
fr.write(System.getProperty("line.separator"));
fr.write("AAAAAAAAAAA");
fr.close();
}

How to provide space and new line to the text in AI Script

how to provide space and new line to the text in AI Script

?? can you explain better, can you at least add another sentence?
space
var mySpace = " ";
new line
var newLine = "\n";

Line Spacing in text field.

Hi,
I have added many text fields to my pdf document. Some of them need following:
1.
Adjust the line spacing between two lines.
2.
Make the text "justified".
I can not find any way to accomplish these things. Can anyone tell me how to do these things?
Thanks,
Vijay

Geo,
Are you talking about check box "Allow Rich Text Formatting" in the Text Field Properties dialog box? I have it checked.
But still it does not give me ability to adjust line spacing or "justify"ing the text.
Thanks,
Vijay

Want to know how to check for new line character in text file

Hi All,
I`m trying to read data from text file. However I`m not sure whether the data is in 1st line or nth line. Now I`m trying to read the text from the readline. But if text is "" and not NULL then my code fails. So I want to know how to check for new line character and go to next line to find the data. Please help.
Thanks
static int readandwriteFile(Logger logger,String filepath){
          BufferedWriter out = null;
          BufferedReader in = null;
          File fr = null;
          int get_count = 0;
          try     {
          if(new File(filepath).exists())
          fr= new File(filepath);
                    System.out.println("FileName: "+fr);
               if(fr != null){
in = new BufferedReader(new FileReader(fr));
                         String text = in.readLine();
                         if(text != null){
                         get_count = Integer.parseInt(text);
                         in.close();
                         else{
                              get_count = 0;
     else{
out = new BufferedWriter(new FileWriter(filepath));
     out.write("0");
            out.close();
               }          //Reading of the row count file ended.
          catch(Exception e) {
               e.printStackTrace();
          finally {
               try{               if (in != null) {
                         in.close();
          if (out != null) {
                         out.close();
          catch(Exception e) {
                    e.printStackTrace();
          return get_count;
     }

You are calling the readline() only once which means you are reading only the first line from the file...
Use a loop (Do-While preferably)
do{
//your code
}while(text == "")

Need a JavaScript to enable/view Multi-line option for Text fields.

Hello All,
I need a JavaScript to enable/view Multi-line option for all the Text fields in PDF Form.
Assume that I have a PDF form of Fields from F1 to F100 and it contains 25 Checkboxes, 25 Combo Box and 50 Text Fields. Now i need a javascript for which i need to enable Multiline for only Text Fields. So Is there any JS for which i can enable the Multiline option for only Text fields and not for ComboBox or Checkbox.

Hi timo,
Thanks for your help. iam trying to use the iteraor approch to do this. but i don't know how to fetch the data entered in the form that was built by the iterator. can you please tell me .
thanks

Content of a single line in a text field

I am loading a hundred string values from a text field (each
with a <br> after them) into a multiple line Dynamic text
field set to display html. When a user clicks on any one of the
lines, I want the content of that line only to be set into a
variable for further processing.
any ideas on how to do this simply assuming that the loaded
in data will be changing quite often?
thanks

Use the asfunction protocol to call a function and set the
value into a
variable.
mytxt.htmlText = "<a
href='asfunction:setValue,test'>Hi!</a>";
var valuelink:String = null;
function setValue(value:String):Void
valuelink = value;
trace(valuelink );
Regards,
Erick Souza | ericksouza.com

Addind text in a new line within a text box

Hi everyone,
I have a classic text box component that i am using inside
director. I want to show some text inside this text box in such a
way that it should come in. For example I am adding "Item 1" ,
"item 2", " item 3" then every item should be placed in new line.
I tried using new line symbol ( \ ) it but it didn't worked.
set member("textbox").text = "Item 1 " & \ & " item
2" & "Item 3" ---------> this gave me error
Please suggest how to do this thing.
Thanks
Atul Saxena

Hi Atul,
Try using 'RETURN'
set member("textbox").text = "Item 1 " & RETURN & "
item 2" & RETURN &
"Item 3" --------->
Tim
"Atul Saxena" <[email protected]> wrote in
message
news:envfet$dpt$[email protected]..
> Hi everyone,
> I have a classic text box component that i am using
inside director. I
> want to
> show some text inside this text box in such a way that
it should come in.
> For
> example I am adding "Item 1" , "item 2", " item 3" then
every item should
> be
> placed in new line.
>
> I tried using new line symbol ( \ ) it but it didn't
worked.
> set member("textbox").text = "Item 1 " & \ & "
item 2" & "Item
> 3" --------->
> this gave me error
>
> Please suggest how to do this thing.
>
> Thanks
> Atul Saxena
>

Inserting new line to a text file at position #

Hi,.
Is it possible to do this in java?
1. Open a new text File (woutFile)
2. woutFile.write(" line #1\r\n"); // write new line
3. woutFile.write(" line #2\r\n"); // write new line
4.woutFile.write(" line #3\r\n"); // write new line
5. Go to line #2 position on a text file
6. Insert NEW LINE between line #2 and Line #3
7. move to the end-of-file
8.Close the file
Please help

Is it possible to do this? please look at question
inside comments.Your question has already been answered. Beyond that,
if you have some code and you want to know if it will
work, then run it and see.The answer was no. It's one of the fundamental properties of files that you cannot insert content in the middle, just at the end. To insert content you first have to make room for it. In this respect a file works like an array and not like a linked list.

Writing to a new line in a text files

I have a servlet that collects results from a questionnaire by getting the parameter values of the radio buttons on a questionnaire page. I am trying to store the results of the questionnaire by writing them to a text file. I can get it to write to the files fine but cannot seem to get it to write the next set of results to a new line. I have many different ways but cannot seem to get it to work. Any ideas?
Heres the part of the code that writes to a text file
String lineRead = "";
            int lineCount = 0;
            while((lineRead = input.readLine()) != null)
                lineCount ++;
                String result = request.getParameter("question" + lineCount);
                output.write(result + ",");
                output.write("\n");

Heres the part of the code that writes to a text
file
String lineRead = "";
int lineCount = 0;
while((lineRead = input.readLine()) !=
adLine()) != null)
lineCount ++;
String result =
String result = request.getParameter("question" +
lineCount);
output.write(result + ",");
output.write("\n");
Can you do output.writeln(result + ",");?
Failing that, putting output.write("\n") inside the while loop should do the trick.

Concat 4 source fields in new line to a single field in IDoc segment-field?

HI,
My requirement is below: Need to concar 4 sources fields in a file and map them to a single target field (In IDoc) with each source field in new line.
Lets say if I have a source file with
f1, f2, f3, f4
I need to send to single target field as follow:
f1
f2
f3
f4
It is basically concat in newline. Can I use any delimiter string in std concat funtion or help me to provide sample code for UDF.
Regards,
N@vIn

Sample UDF for your case.
public String concatStrings(String var1, String var2, String var3, String var4, Container container) throws StreamTransformationException{
          String newLine = System.getProperty("line.separator");
          //String newLine="\r\n";
          String concatString =var1 + newLine + var2 + newLine + var3 + newLine +var4;
          return concatString;
Note: Use System.getProperty that would take care for all Operating systems when deploy this code.
you might not able to test in test mapping tool
If you run in eclipse or nwds you will see output as follows
var1 value
var2 value
var3 value
var3 value
Hope this helps. Let me know further.

New line in a text field

Similar Messages

Maybe you are looking for