New Line in Messages

I was told, a few days ago, by Apple Care that there is no keystroke for a New Line in Messages in OS X.
There is a better alternative, however! Use Siri: "Dear Chuck comma new line" ... will put a new line where it belongs!
Chuck

fourwheelin,
RIGHT ON!! Many thanks,
Chuck

Similar Messages

How to add new line in message on my S890

My stock keyboard in Lenovo S890 doesn't have enter key, is this normal ? How to add new line ?
However this happened only in messages, while using whatsapp the enter key present.

Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks

A new line is showing up on messages I receive. It's seems to be a row of links, including a URL to (maybe) the msg source. How do I get rid of it?

On my incoming messages, under my toolbars & above the msg header, is a new line. It sort-of looks like another toolbar, but different. It reads from left to right and each word is highlighted white:
Back Forward Refresh URL: ___________________ Go
Each of these words except for "URL:" are in boxes as if they are links but they don't work like links.
What is this and how do I get it off my incoming messages?
Thanks, nanciewanda

I have no idea. Perhaps you could post the troubleshooting information so we can have a better look at what is going on.
Click the Help menu (Alt+H) and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.

New-line character in stacked message pop-up

I have run into a brick wall with this situation--
Our clients are running Client/Server Forms 6i, and Web Forms 6i using Patch 10. They are about to upgrade web forms to the latest version 9.0.4.1.0 (10g).
We have a few PLL routines that use the stacked message method: Message('text here'); Message(' ',no_acknowledge);to display important error messages to the user. It is especially useful to display the multiple ORA- errors when an unexpected server error occurs.
Throughout all versions of Client/Server forms, and even in our old version of Web forms, I can use chr(10) or another character to start each error message on a new line.
Somewhere after Patch 10, Oracle has removed that capability. Instead, pop-up stacked messages word-wrap into a multi-line message, and display the new-line character as a box indicating an unprintable character. Our nicely formatted messages are a mess!
I have been told I should use an alert, which supports chr(10) as the new line. However, this is a PLL routine, and I would have to create an alert in hundreds of forms just to accommodate this short-sightedness. The changes and subsequent testing and release issues make this an unworkable solution.
I am clueless as to why this feature would be removed. Oracle support is treating it as an enhancement request. Any ideas?

Steve,
If you really have hundreeds of forms ... create one more - to display your messages. Make it modal and nice looking. Call it through the library. Design it to work both as [OK] message and as an users responce [Yes]/[No]/[Cancel].
And honestly - I don't think message(); message() is the best way to display messages. Whoever designed the application should've think about alerts with standartized naming convention, so they can be handled easily through the PLL.
Venko

af:validateLongRange displaying message: How to insert 'new line' ?

Hello,
While using <af:validateLongRange> tag we need to display message in a well formatted way, we have to display each statement in a new line.For eg. : message as displayed by property 'messageDetailNotInRange' must come in three different new lines not as a continuous statement.I tried inserting '\n' escape sequence for new line, but it dint work.I tried spacing the statements but that also is not working out.
Any idea how can we get this message displayed separately in three rows rather than in a continuous statement ?
++messageDetailNotInRange="You have entered a value more than is available. Value entered must be in the range of {2} to {3}.To delete this line, clear the value and click Delete"++
+<af:validateLongRange id="xyz_VC1" minimum="1"+
maximum="100"
messageDetailNotInRange="You have entered a value more than is available. Value entered must be in the range of {2} to {3}.To delete this line, clear the value and click Delete"
messageDetailMinimum="Minimum {0} allowed is {2}"
messageDetailMaximum="Maximum {0} allowed is {2}"
hintNotInRange="#{'xyz'}"/>

Thx..Done that!! but dint get the desired result ,I put it as :-
messageDetailNotInRange="You have entered a value more than is available. Quantity entered must be in the range of {2} to {3}. To delete this order line, clear the quantity and click DELETE."
On corresponding page this message was displayed as :
You have entered a value more than is available. Quantity entered must be in the range of 1 to 100. To delete this order line, clear the quantity and click DELETE.
It dint insert line breaks in the message.Do i need to write it differently?
Above html code is modified once i posted it, it has inserted line breaks here for the br tag i added , but in my actual .jsff page it did not . I can only see br tag displayed as part of message and no new line got inserted.
I dont see an option to attach a file with the post so that I can show the code to you.
Edited by: user13439821 on Aug 15, 2011 2:58 PM

EA1 - new line in title on error message

My database connection is oracle 10.2.
Into a workbook type "select" and press F9 to run the script
The title of the error message is ORA-00936: missing expression
However, at the end there is a new line character.
This displays under window 2000 as a square box, and under windows XP it puts the text off centre vertically in the caption.
This seems to happen for any error code.

Yes it does and I hope they can fix it as part of 1.5, but it has been there for ages.

Long Message - how to preserve new line entry

My TIP message is defined in Oracle Applications. It contain few sentences and each one starts on the new line. I would like to preserve this formatting while using it as a Long Tip or even a text on the page. It looks like the new line characters are ignored and the message displays as one line. I tried and /n but none of the above works.
Is it possible? Does anyone has an idea how to do it?
Tomas

As far I remember, there is a work around,Just try it and update the thread. I remember doing this long time back. Actually in html &nbsp stands for 1 blank space.
As you want the second line to start with new line put as many &nbsp, that formatting automatically puts the furthur message in second line.
Try this, i hope this should work.
--Mukul

RE: PRESSING ENTER KEY TO MOVE TO A NEW LINE INSTEAD OF SENDING TEXT MESSAGE ON Q5

I'd rather use the enter key to move to a new line than to send message. I previously used this on curve 9300 and I'm frustrated right now I'm unable to figure how to move to the next line on this Q5. I thought the Q5 will be an improvement on the curve. I'll will be disappointed if there is no way about this. Can somebody help please?
Solved!
Go to Solution.

Hi curio
From Blackberry Hub, tap three dots at bottom right > Setting > Text Messages > Use enter key to send > OFF. It will make a new line if you press enter key.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

New line in concat function in message mapping

Did any1 succeded adding 2 xml elemnts with LF/CR ( new line ) between them?
so when I use content conversion to txt file it will put new line between this 2 elements?
I tried the following delimiters
'0x0D''0x0A'
'nl'
''0x0D''''0x0A''
nothing worked
thx
Shai

Shai,
Here is a simple udf for adding a new line between two fields. Similarly you can extend it.
Create a "Value" UDF as name "input" and add two arguments 'a' and 'b'.
Add this code:
String lines;
lines = "";
lines = lines.concat(a + '\n' + b + '\n' );
return lines;
Also while testing in test tab if you dont see the new line in the ouptut then view the source of the output. There you can see the new line.
Regards,
---Satish

What is happening with my new line install?

Hi,
I don't normally post on anything like this, but feel I am being left no alternative, other than cancelling my order.
I am a new customer to BT and on the 14th of May I placed a order for a broadband and phone package, which was to include a new line installation on the 5th June between 8am and 1pm.
I also ordered a new phone system and dual wifi dongle which all turned up as expected.
On the 5th June I took a day off work and waited until just after 2:30pm for the engineer not to turn up.
I received no call, text or email telling me that the appointment had been cancelled, it took me to call BT and finally manage to get to speak to somebody human to find out that it had apparently been delayed.
First I was speaking to somebody from the UK the next I was put through to order management in India, which started to infuriate me more as the line was really bad and I was calling from my mobile for then to have them hang up on me.
I called back a further 3 times after being passed from pillar to post to eventually get put back in touch with a order management lady in India again.
She told me that the problem was with openreach as they reckoned they had tried calling me on the 14th May (when I placed the order) to which I replied I had not received any phone call from them.
They wanted to know if it was a first or second line installation, I replied 5 times with it is a separate line that needs to be installed and I still don't think she understood after that.
I was then told I would get an update on the 12th June between 8am and 8pm as to when the line was going to get installed, to which I did and again was a bad line as the call came from India just to be told there is another delay which will be the 19th June.
At this point I'm beginning to lose my patience, I had waited nearly a month for the line installation to happen to be told that there was another delay which would take another 7 days before somebody updated me again.
After I put the phone down I received a text from BT sms saying they had tried to contact me but we're unable to do so but not to worry they will be back in contact on the 22nd June?
Very strange seen as I had just spoken to somebody and was told the 19th June.
I rang back through to BT and got put through to India yet again where the signal was poor and asked that somebody call me from the UK as nothing seems to be getting sorted.
Within 10 mins I got a call back and was put through to BT in Dundee, I explained the whole situation over again and was told they would be looking into the problem and would get back to me later on the same day the 12th June.
It is now the 17th June and I still have no answer as to when the line installation is taking place, so I can start using the equipment I have paid for.
if I knew in the first place that this was going to be a problem I would have used a different provider other than BT, as a new customer I find their lack of communication and generally not seeming to give a **bleep** about customers poor, with my only choice then being if I don't get the answers I want on the 19th June I will cancel the order and send everything back for a full refund and would advise others not to use BT in the future.
Sorry for the rant and this being my first post but I am beginning to lose my patience any help would be appreciated.

Hi lda1979,
Welcome to the forum and thanks for your post.
I am so sorry that your order has been delayed and you are not getting any information on this.
Can you send me in your details using the "Contact The Mods" link found in my profile and I will find out what is happening.
Cheers,
OlgaC
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Records are not getting imported due to new line charactor in the field

Dear All,
I am trying to load a file into target but the import is failing. The error thrown is as below;
During the import of leads into CRMoD through loading the New lead/Step lead file received from CA, leads have not been imported and we encountered the following
error message:
"Import field 'LAST_NAME' had a blank value for the required Oracle CRM On Demand field 'Last Name'. This record was not imported. Please enter desired values for
the required fields and re-import this record."
Reason:
Leads are not imported due to an additional new line (Enter) character, which results in the subsequent lines not being picked up and the error of import failure.
Please help me to resolve this to remove the new line charactor in the field so that import succeeds..
By the way, I am working on ODI 11g.
Thanks in Advance
Regards
Santy

While i was reading your post i remembered an issue that madded me. I don't know Oracle CRM, but a possible workaround could be to create a temporary Oracle table and load all data inside it. After that load in CRM only valid rows.

500k profile after disruption and new line install...

Hello,
Status:
I have an open fault logged with BT;
Phone line ok but broadband speed low, profile appears stuck at 500k.
History: sporadic BBand connection and noisy phone line followed by outright failure of both.
Engineers visited and confirmed line between street and master socket probably corroded - they put it on leg+leg to get it working while we waited for a new physical line to be installed.
Pavement was dug up, new armoured cable run from street to house, and a proper master socket fitted (NT5 ? but no inbuilt ADSL filter).
In effort to ensure low noise, ALL other sockets in the property disconnected.
Digital phone (3 handsets off a single powered base) are run off the master socket using a filter.
Router is business hub - 2700hgv; f/w 6.1.1.48.1-enh.tm , h/w 2701-100589-005 .
Hub is connected to same master socket as phone (as it's the only socket now connected to the new line).
New line was installed approx 18 days ago.
Speed tests (speedtest.net) repeatedly show download of 480kbps, upload around 620kbps.
No change since new line was installed and all but the master socket decomissioned.
I use wireless to the router but also repeated tests with a Cat6 copper RJ45 cable and got same results.
Have taken all wireless devices offline and removed electrical items near phone line power supply and cable path to reduce potential noise and repeated tests.
I left the router on for two weeks and no increase in broadband speed.
I rebooted it twice this weekend to see whether it picked up a different profile - but no change.
BT speedtester repeatedly indicates a profile of 500k (full results further down).
Last year I had speeds about 512k on a DrayTek router before switching to the 2700HGV. The change to the BT hub upped the download speed to around 1Mbps, which made a huge difference.
I know I am "a long way from the exchange" but I've had 1Mbps last year and now have a new line into my property, so not much left that I can do to improve the situation.
I'd like to know what can be done to get me at least 1Mb download again.
I have an engineer visit due tomorrow but I believe that will be purely to finish putting paving slabs back over the armoured cable that's been installed (i.e. OpenReach dig team rather than line engineers).
After those slabs are done, I expect the fault will be closed but I'll still have a 500k profile and will need to raise a new fault all over again - that fault was opened 5 weeks ago.
Results of speedtester.bt.com run just now (1pm Sun 13th March 2011):
Download speed achieved during the test was - 363 Kbps
For your connection, the acceptable range of speeds is 100-500 Kbps.
Additional Information:
Your DSL Connection Rate :576 Kbps(DOWN-STREAM), 777 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 2.46:14.86:82.95 (SBE:NBEBE)
Upload speed achieved during the test was - 638 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 777 Kbps
Router web interface shows:
Rate:
576 kbs
778 kbs
Max Rate:
2621 kbs
784 kbs
Noise Margin:
16.7 dB
7.0 dB
Attenuation:
62.8 dB
35.8 dB
Output Power:
16.1 dBm
12.4 dBm
Protocol:
G.DMT2 Annex A
Channel:
Interleaved
DSLAM Vendor Information
Country: {46336} Vendor: {IFTN} Specific: {48753 }
ATM PVC:
0/38
Rate Cap:
2621 kbs
Attenuation @ 300kHz:
62.8 dB
Uncanceled Echo:
-14.8 dB
Ok
VCXO Frequency Offset:
-2.0 ppm
Ok
Final Receive Gain:
34.5 dB
Ok
Impulse Noise Comp. Tones:
0
Ok
Excessive Impulse Noise:
0
Ok
I hope that's the information that someone might need to help me at least get 1Mbps back on my line.
Regards,
BK

Hi Bk1
Welcome to the Community.
Send me an email to the link in the about me section of my profile.
I can have this looked into for you further.
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How to print new line in webdynpro

Friends,
I want to print a success message in new line, the below shown is a one singe line and want to split two lines.
I used this:
wdComponentAPI.getMessageManager().reportSuccess("Example : this is the test message i would like to print in two lines, some how it is not working please help me how to "+
"/n/n print this in two new lines.")
when i execute the above code it is displaying on screen as succsess message as below shown in one line:
Example : this is the test message i would like to print in two lines, some how it is not working please help me how to print this in two new lines.
But my requirement expecting some thing below shown:
Example : this is the test message i would like to print in two lines, some how it is not
working please help me how to print this in two new lines.

really? how? Ó.o

How to add a new line in SMS(Line Break).

Hi All,
I need to send SMS from PL\SQL Procedure
The problem i have been facing is that the string being passed in as sms content is not parsing a newline character.
It shows all content in one line.
I need to break them in several lines.
Give me a direction how to add a new line in SMS.
Regards,
Raj.

Hi,
Sure, Here it is
CREATE OR REPLACE PROCEDURE APPS.AUTO_SMS_RTV_REPORT
IS
sender VARCHAR2(1000);
recipient VARCHAR2(1000);
message VARCHAR2(4000);
sub VARCHAR2(1000) := 'HELLO';
dt1 varchar2(1000) := to_char(sysdate,'DD-MON-YY');
mailhost VARCHAR2(30) := '10.7.7.xxx';
mail_conn UTL_SMTP.CONNECTION;
v_crlf VARCHAR2(2) := CHR(13)||CHR(10);
CURSOR cur_Rejection_Records IS
 SELECT DISTINCT
 rt.VENDOR_SITE_ID ,
 pvs.email_address VENDOR_MAIL_ID ,
 pvs.PHONE vendor_contact_no ,
 hre.EMAIL_ADDRESS Employee_mail_id ,
 hre.FULL_NAME
 FROM apps.rcv_transactions rt,
 apps.po_vendors pv,
 apps.po_vendor_sites_all pvs,
 apps.mtl_transaction_reasons mtr,
 apps.fnd_user fu,
 apps.hr_employees hre
 WHERE transaction_type = 'RETURN TO VENDOR'
 --AND TRUNC(rt.transaction_date) = TRUNC(SYSDATE)
 AND rt.vendor_id = pv.vendor_id
 AND rt.vendor_site_id = pvs.vendor_site_id
 AND rt.REASON_ID = mtr.REASON_ID(+)
 AND fu.user_id = rt.last_updated_by
 AND hre.EMPLOYEE_ID = fu.EMPLOYEE_ID
 AND TRANSACTION_ID IN (
 11902189,
 11902253,
 11902148)
BEGIN
 FOR rec_Rejection_Records IN cur_Rejection_Records
 LOOP
 Begin
 sender := '<[email protected]>';
 recipient := rec_Rejection_Records.vendor_contact_no || '@aaaa.com';
 mail_conn := utl_smtp.open_connection(mailhost, 8025);
 utl_smtp.helo(mail_conn, mailhost);
 utl_smtp.mail(mail_conn, sender);
 utl_smtp.rcpt(mail_conn, recipient);
 utl_smtp.DATA( mail_conn,
 'Date: ' || TO_CHAR(SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss') || utl_tcp.crlf ||
 'From: ' || sender || utl_tcp.crlf ||
 'Subject: '|| sub || utl_tcp.crlf ||
 'To: ' || recipient || utl_tcp.crlf ||
 utl_tcp.crlf ||
 'Dear Supplier,'||CHR(10)|| utl_tcp.crlf ||'\\\0x0A'|| -- HERE I NEED LINE BREAK
 'Please.'|| utl_tcp.crlf
 DBMS_OUTPUT.PUT_LINE('Yep !!! SMS Sent Sucessfully :) ');
 utl_smtp.quit(mail_conn);
 EXCEPTION
 WHEN UTL_SMTP.PERMANENT_ERROR THEN
 dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
 WHEN OTHERS THEN
 dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
 END;
 END LOOP;
END AUTO_SMS_RTV_REPORT;
/

Restricting new line item of completed sales order in VA02

Hi,
My requirement is to restrict the user to add new line items for Sales Order if the Header status is completed in VA02 transaction.
I have done the coding in "userexit_move_field_to_vbap" as it is displaying pop up an error message and stop the users from adding a new line item.
Popup message contains 2 buttons 'Continue' & Exit.
If user clicks Continue it should be stay in same transaction (Va02) and if user clicks 'Exit' it should exit the VA02 transaction.
But when I click the 'Continue' button it is staying in the same transaction and newly entered line item values are not clearing. But these values should not appear after clicking 'Continue' button.
Can any body please help me in this regard?
Thanks in advance.
Ranjith.

Hey,
Is this ranjith tavidisetty.... if yes please call me on 09974440499...
need to speak to you.....
regards,
naveen.

New Line in Messages

Similar Messages

Maybe you are looking for