New Nodes and writeXML

Hi,
i'm a beginner in XML world and a'm trying to add my nodes to the xml-output, that was generated by getMyView().writeXML(1,Row.XML_OPT_ALL_ROWS, xsl) from my BC4J.
Smth. like:
XMLNode e = (XMLNode)getMyView().writeXML(1,Row.XML_OPT_ALL_ROWS, xsl);
XMLDocument out = new XMLDocument();
Element root = out.createElement("root");
out.appendChild(root);
root.appendChild(e); <- error
But i get: "oracle.xml.parser.v2.XMLDOMException: Node doesn't belong to the current document.". I tried a lot a of combinations, but without success.
Who can help, please?
Alex.

Hi,
i have another question. I need to get german number format for my output and german date format(dd.mm.yyyy).
i tried to write getSession().setLocale(Locale.GERMAN);
before Node e = myView.writeXML(1,Row.XML_OPT_ALL_ROWS); but it doesn't work. For the date i can use your FlexiDate domain in BC4J komponent (i think at least), but what with numbers?
Thanks in advance,
Alex.

Similar Messages

How to create a new node and its subnodes(zreports) in Transaction SRET

Hi Expets,
My requirement is to create a new node and subnodes(zreports) in the Transaction SRET.
Where as i am able to create a subnode(zreports) under the existing node but not able to create a New Node and
Subnodes(zreports) under it.
To create the subnodes(zreports) i used Transaction SERP and i was able to create the new node in SERP but not able to find it in SRET.
So please help me out.
Thanks,
Krishna

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to create a new Node and bind it to the wdContext root at run time

Hi experts,
Does anyone have sample code about 1) adding a new node to the root context, 2) give it a name and 3) referring to this newly created node with the conetxt path?
Thanks

Armin,
I am trying to do this and keep getting erro about incompatible class:
wdContext.getNodeInfo().addChild("DynamicNode",
              mymodel.class,
              true,
              CMICardinality.ONE,
              CMICardinality.ZERO_TO_ONE,
              true,
              wdContext.getContext().getStructure("com.my.structure") );
              IWDNode node = wdContext.getChildNode("DynamicNode", 0);
              IWDNodeElement e = node.createElement(an_instance_of mymodelObject());
              node.addElement(e);
Can I do it this way?

Problem when I extend an oracle rac 10g on new node

Hi everyone
I need to extend an oracle RAC but i have problems when I add a new node. My actual enviroment is:
1) Oracle Grid Infraestructure 11gR2 - 11.2.0.3 (Upgraded from Clusterware 10gR2 + ASM 10gR2)
2) Oracle Rac Database - 10.2.0.5
(all on one only node)
The first problem was when I executed the script "root.sh" on the new node because this script called the old Clusterware home (/oracle/product/10.2.0/crshome). I edited the file and I changed this path for /oracle/gridbase/product/11.2.0/gridhome (current home for GI). Finally, I execute the script.
Now, I tried to extend the rac through of DBCA, but when, I choose the new node and I clic on "next" button then appears the following error:
"The nodes "[rstatbdbpm02]" are not part of the cluster. Make sure clusterware is active on these nodes before proceeding"
However, when I execute the "crsctl" command to view the status of cluster the result is correct:
[oracle@rstatbdbpm01] /home/oracle > crsctl status res -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.DATA.dg
ONLINE ONLINE rstatbdbpm01
ONLINE ONLINE rstatbdbpm02
ora.LISTENER.lsnr
ONLINE ONLINE rstatbdbpm01
ONLINE ONLINE rstatbdbpm02
ora.asm
ONLINE ONLINE rstatbdbpm01 Started
ONLINE ONLINE rstatbdbpm02 Started
ora.gsd
OFFLINE OFFLINE rstatbdbpm01
OFFLINE OFFLINE rstatbdbpm02
ora.net1.network
ONLINE ONLINE rstatbdbpm01
ONLINE ONLINE rstatbdbpm02
ora.ons
ONLINE ONLINE rstatbdbpm01
ONLINE ONLINE rstatbdbpm02
ora.registry.acfs
ONLINE ONLINE rstatbdbpm01
ONLINE ONLINE rstatbdbpm02
Cluster Resources
ora.BDBPM.BDBPM1.inst
1 ONLINE ONLINE rstatbdbpm01
ora.BDBPM.BPMVEH.BDBPM1.srv
1 ONLINE ONLINE rstatbdbpm01
ora.BDBPM.BPMVEH.cs
1 ONLINE ONLINE rstatbdbpm01
ora.BDBPM.db
1 ONLINE ONLINE rstatbdbpm01
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE rstatbdbpm02
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE rstatbdbpm02
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE rstatbdbpm01
ora.cvu
1 ONLINE ONLINE rstatbdbpm01
ora.oc4j
1 ONLINE ONLINE rstatbdbpm01
ora.rstatbdbpm01.vip
1 ONLINE ONLINE rstatbdbpm01
ora.rstatbdbpm02.vip
1 ONLINE ONLINE rstatbdbpm02
ora.scan1.vip
1 ONLINE ONLINE rstatbdbpm02
ora.scan2.vip
1 ONLINE ONLINE rstatbdbpm02
ora.scan3.vip
1 ONLINE ONLINE rstatbdbpm01
[oracle@rstatbdbpm01] /home/oracle >
Please, Any idea with that problem?
Thanks,
Luis

Hi,
Please check dbca trace logs for further checks, it will give an idea what command is being run to check status of cluster.
Generally first checks should be on inventory for rdbms home, grid home and making sure no ORACLE related parameter is set in environment.
Regards,
Sharma

New node at top menu

Hi, I'm looking to add a new node at the top menu, I know someone posted something similar but he never got an answer (Addition of new child node (to menu item)
I created a new component that has the following:
<@dynamichtml custom_finish_layout_init@>
navBuilder.addPrevSiblingNodeTo('ADMINISTRATION', 'collection', 'id==MY_TEST', 'label==Parent');
navBuilder.addChildNodeTo('MY_TEST','item','id==MY_TEST_CHILD','label==Child', 'url==<$HttpCgiPath$>?IdcService=COLLECTION_DISPLAY&IsClbraList=1&SortField=dClbraDescription&SortOrder=Asc&ResultCount=nolimit');
<$include super.custom_finish_layout_init$>
<@end@>
Why isn't this new node and its child being displayed on the content server besides the Administrator's menu?

I think what you want to do is to add a tray or menu at top level.
If am right, you can try:
<@dynamichtml custom_finish_layout_init@>
     <$include super.custom_finish_layout_init$>
     // add a drop-down menu, or a tray to the UI
     navBuilder.addChildNodeTo('NAVTREE', 'collection', 'id==MY_TEST', 'label==My label');
     if (navBuilder.menuB)
          navBuilder.menuB.addTopLevelNode("MY_TEST");
     else if (navBuilder.trayA)
          navBuilder.trayA.addTopLevelNode("MY_TEST");
navBuilder.addChildNodeTo('MY_TEST','item','id==MY_TEST_CHILD','label==Child', 'url==<$HttpCgiPath$>?IdcService=COLLECTION_DISPLAY&IsClbraList=1&SortField=dClbraDescription&SortOrder=Asc&ResultCount=nolimit');
<@end@>

AddNode when add database software to new node

Hi,all;
after add oracle clusterware to new node,I perform $ORACLE_HOME/oui/bin/addNode to add database software to new node.
but the commad it seem to add clusterware to new node again.how to fix?
cluvfy stage -post crsinst -n all
passed
detail of inventory.xml
<INVENTORY>
<VERSION_INFO>
<SAVED_WITH>10.2.0.1.0</SAVED_WITH>
<MINIMUM_VER>2.1.0.6.0</MINIMUM_VER>
</VERSION_INFO>
<HOME_LIST>
<HOME NAME="OraDb10g_home1" LOC="/opt/oracle/product/10.2.0/db_1" TYPE="O" IDX="2">
<NODE_LIST>
<NODE NAME="rac1"/>
</NODE_LIST>
</HOME>
<HOME NAME="OraCrs10g_home1" LOC="/opt/oracle/product/10.2.0/crs_1" TYPE="O" IDX="1" CRS="true">
<NODE_LIST>
<NODE NAME="rac1"/>
<NODE NAME="rac2"/>
</NODE_LIST>
</HOME>
</HOME_LIST>
</INVENTORY>
Edited by: Index.Lee on Sep 16, 2010 9:19 AM

Hi,ssolbach:
thank you.
environment is good.
You mean ./addNode copy Oracle database software to new node?
No,in fact,I can not continue the installation.
as well know, when add clusterware to new node, when GUI goes "add new nodes list",It will list the new member with hostname,host-vip,host-priv,
While add database software to newnode,the same GUI will display 'host_name' only.
the problem I meet is:
After finished add clusterware to new node, I add database software to new node. and when "add new node list",it dispaly new member with hostname,host-vip,host-priv. so that,I cannot proceed the installation.

Create New Oracle R12 Server with multi nodes and migrate the Production Data on it ?

Good Day,
I have New Task and I don't know how to start.
Am working on Oracle Application 12.1.3
And Database 11.2.3
OS Redhat Linux 6.1
My Production Server have the database and the application on the same Server (Single node),
I want to create another 2 Servers with same Operating system to separate the application and the Database to be each one on separate server (Multi Nodes),
And Migrate the Production Server Data on It?
And i need to know how many days it will takes because we are live now ?
Regards

Install the OS on the new servers -- Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (Doc ID 761566.1)
Use Rapid Clone to move the application/database to the new server.
Rapid Clone Documentation Resources For Release 11i and 12 (Doc ID 799735.1)
Cloning Oracle Applications Release 12 with Rapid Clone (Doc ID 406982.1)
For the duration, it depends on the size of your application/database and how long it takes to copy the files.
Thanks,
Hussein

Issue with Creation of new entity and adding it to collection

Hi Experts,
LR_ENTITY_ACCT(Account details) is the parent node and that is populated using the query builder.
From there, I am trying to get realtion of notes section 'BuilNotesRel'). If it is not present, I am creating a new entity of that relation through parent node, setting attributes and saving it. I have written the following code. While debugging, I can see the new entity created under parent LR_ENTITY_ACCT and set property is also working. But afer execution, if I check in genil_bol_browser transaction, there is no new entity created under BuilNotesRel. Please help.
data: LR_ENTITY_ACCT          TYPE REF TO CL_CRM_BOL_ENTITY,
           LR_COL_NOTES            TYPE REF TO IF_BOL_BO_COL,
              LR_ENTITY_NOTES         TYPE REF TO CL_CRM_BOL_ENTITY.
        IF LR_ENTITY_ACCT IS BOUND.
          LR_COL_NOTES ?= LR_ENTITY_ACCT->GET_RELATED_ENTITIES( IV_RELATION_NAME = 'BuilNotesRel' ).
IF LR_COL_NOTES->SIZE( ) = 0.
    LR_ENTITY_ACCT->create_related_entity( iv_relation_name = 'BuilNotesRel').
    LR_CORE_3 = CL_CRM_BOL_CORE=>GET_INSTANCE( ).
            LR_CORE_3->MODIFY( ).
        LR_COL_NOTES ?= LR_ENTITY_ACCT->GET_RELATED_ENTITIES( IV_RELATION_NAME = 'BuilNotesRel' ).
          LR_ENTITY_NOTES ?= LR_COL_NOTES->GET_FIRST( ).
              LR_ENTITY_NOTES->SET_PROPERTY( IV_ATTR_NAME = 'TEXT_ID'
                                           IV_VALUE     = 'ZCOM').
            LR_ENTITY_NOTES->SET_PROPERTY( IV_ATTR_NAME = 'TDLINE'
                                           IV_VALUE     = LS_ACCOUNT_DETAILS-NOTES ).
LR_CORE_3 = CL_CRM_BOL_CORE=>GET_INSTANCE( ).
            LR_CORE_3->MODIFY( ).
endif.
endif.
Thanks,
Ramya

Hi Sumit,
I have used a structure for notes which is of TYPE crmt_bupa_il_notes.
ls_notes                TYPE crmt_bupa_il_notes.
Then I create the entity, get properties, set the properties and do a core modify.
LR_ENTITY_NOTES = LR_ENTITY_ACCT->create_related_entity( 'BuilNotesRel' ).
     LR_ENTITY_NOTES->get_properties( IMPORTING es_attributes = ls_notes ).
    ls_notes-task = 'M'.
    ls_notes-text_id = 'ZCOM'.
    ls_notes-langu = 'EN'.
    ls_notes-languiso = 'EN'.
    ls_notes-tdformat = '*'.
    ls_notes-tdline = LS_ACCOUNT_DETAILS-NOTES.
      LR_ENTITY_NOTES->set_properties( EXPORTING is_attributes = ls_notes ).
      LR_CORE_3 = CL_CRM_BOL_CORE=>GET_INSTANCE( ).
            LR_CORE_3->MODIFY( ).
Thanks,
Ramya

New MBP and existing network

Hello All,
I've just migrated from a G4 PB 1.5 to a new MBP and, while I can log into the existing WiFi, I can't see any of the other nodes on the network. I have my wife's MP Black and a Mini acting as a HTPC/Server. I just migrated through using the assistant and didn't change any of the settings yet.
The Mini is sitting headless downstairs so I used to log in remotely using Chicken of the Sea VNC. Now it no longer is visible, nor do the computers show up via network.
It's been a while since I set this network up and I know that 10.4.8 has altered some of the security. What do I need to tweak??
Cheers,
JC

A router separates two LAN networks and creates two broadcast domains. The standard Microsoft workgroup browsing will only list what is inside your LAN and never something outside or across a router.
If you want to access what is on the other side you must manually enter the share with its IP address. If the computer you want to access has IP address 192.168.100.12 then you enter \\192.168.100.10\share.
But as you want to be able to share freely inside your LAN anyway, I would suggest you set up the WRT as wireless simple access point. That way, you only have a single LAN and a single broadcast domain and thus you can find all other computers if you check for other workgroup computers. Instructions how to set it up as access point are here.

Strange behaviour with ActiveX invoke node and Excel

I want to send a table of numbers from LV50.1f to Excel97. After getting a
reg to Excel8.Application I retrieve the Workbooks property, Invoke Item to
select a certain Workbook reference, retrieve the Worksheets collection
reference, Invoke Item and then get a reference to WORKBOOKS again.
Strangely, there is an example code from the NI web site that does exactly
the same, but in the last step a variant is returned in stead of a
reference, which is converted using Variant to G to a Worksheet reference.
when I copied that last invoke node to my VI I also had a variant returned,
so on one diagram I had to invoke nodes connected to the same sources, one
returning a ref, the other returning a variant!
Disco
nnecting the sources to my Invoke node and rewiring gave no change.
Also type casting the ref to workbooks to a worksheets ref, didn't work - I
get errors in the following property node that retrieves a Range - which
exists in Worksheet, but not in Workbooks.
Appearantly, LV gets the returned type mixed up sometimes, and there is no
way to fix it other then copying a invoke node from another diagram?
Finally I got it working though, but this behaviour puzzles me. Contrary to
the example from NI, I now managed to send a table (2d array of strings) in
one call to Excel (don;t need to loop over cells or columns).
PS
I used to do the same using DDE but ranges are different for each language
version of Excel (i.e. R1C1 for English and R1K1 for Dutch), so my VI's need
to know the language of Excel. Also with NT and Win98, getting a DDE
connection often hangs LV. But a big progress has been made - now I need
different VI's for each version of Excel!!!
Ferry Toth
Enraf BV, The Netherlan
ds

Hi Enric,
Can you try your queries again using the new release of DB XML? It contains some improvements in this area.
http://www.oracle.com/technology/software/products/berkeley-db/xml/index.html
John

JTree: HOW TO add a new node

Hi everybody,
Im going to try to be clear...
My problem is the following: I am a beginner using JTree and what I want to do is to add a new node in a certain position in my JTree. I would be very grateful if apart from explanation, any of you could provide me with a piece of code.
Let us think that my tree has the root and some first-level children called group 1, ..., group n. Every group has some children called rulemodule 1, ..., rulemodule m. And every rulemodule has some children called rule 1, ..., rule j.
An example of the visual look of my jtree:
root
__ group 1
____ rulemodule 1.1
______ rule 1.1.1
____ rulemodule 1.2
______ rule 1.2.1
______ rule 1.2.2
______ rule 1.2.3
__ group 2
____ rulemodule 2.1
______ rule 2.1.1
____ rulemodule 2.2
______ rule 2.2.1
Then, let us say that what I want is to add a new rule in the position where it is in this moment rule 1.2.2 (so the rule that was 1.2.2 before would be now 1.2.3, and the one that was 1.2.3 would be now 1.2.4). So I know the name of the group, the name of the rulemodule and the position of the new rule. How could I do that?
In order to build the JTree I have the following statements:
TreeNode treeNode = fillTheTree(ruleModulePart.config.getRuleModules()); This function actually builds the tree.
jTreeModel = new DefaultTreeModel(treeNode);
jTree = new JTree(jTreeModel);
Thanks a lot to everybody!
Fran.

Thanks a lot for your answer Maxideon,
Well, I think that I did not explained it the problem very well...
The example of the tree was just that, an example, but the tree does not look like that. I just wanted to show that the tree has 3 levels of depth.
The declaration of the function would actually be like that:
public void UpdateJTreeWithNewRule (String groupName, String ruleModuleName, String newRuleName, int positionOfNewRule) {
}So I think that I would need to do first a search to find the position of the "group" which corresponds to that 'groupName' and after that the position of the "rulemodule" which corresponds to that 'ruleModuleName'. And then add the 'newRuleName' in the position 'positionOfNewRule' inside that "rulemodule".
Thanks a lot again,
Fran.

SQL Server Distributed Partitioning Views how to add a new node online

We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KH

Thank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH

Error when adding a new node to RAC 10g

Hi all,
I have a RAC 10g environment test in Linux Red Hat Umbreakble 5 with two nodes. This RAC is fine on 2 nodes.
I want to add a new node (rac3) of the following way:
- The node 1 (rac1) is started and the instance ORCL1 is online.
- The node 2 (rac2) is offline. i.e the machine is off.
- The node 3 (rac3). The machine is on and already configured
So that when I execute the CRS_home\oui\bin\addnode.bat on node 1 and put the information of node 3 (Public node name, Private node name, Virtual host name) and press next I get the following message:
OUI-35000: Fatal cluster error encountered (PRKC-1071 Nodes rac2 did not respond to ping in 30 seconds) - Sure: The machine is off;
My question is: Can´t I add a new node on RAC if a node is off ?
Anybody can help me.
Thanks.
(Wander Brazil)

Interesting question.
You might have better luck getting an answer if you ask where people discuss RAC, instead of asking where people report documentation issues. (Go to http://forums.oracle.com and scroll down to 'Grid Computing' to see RAC forums.)

Adding new node to the Clusterware fails with the root.sh script.

Dear All,
I had successfully added third node to the existing 2 node cluster. After adding new node I need to run the root.sh scripts, but it was faling with the below error.
Please help me with the below issue:
Instantiating scripts for add node (Monday, April 8, 2013 3:23:14 PM EDT)
. 1% Done.
Instantiation of add node scripts complete
Copying to remote nodes (Monday, April 8, 2013 3:23:16 PM EDT)
............................................................................................... 96% Done.
Home copied to new nodes
Saving inventory on nodes (Monday, April 8, 2013 3:31:40 PM EDT)
. 100% Done.
Save inventory complete
WARNING:
The following configuration scripts need to be executed as the "root" user in each new cluster node. Each script in the list below is followed by a list of nodes.
/u01/app/11.2.0/grid/root.sh #On nodes svphxwgdbprd06
To execute the configuration scripts:
1. Open a terminal window
2. Log in as "root"
3. Run the scripts in each cluster node
The Cluster Node Addition of /u01/app/11.2.0/grid was successful.
Root.SH Script Log:
[root@svphxwgdbprd06 ~]# /u01/app/11.2.0/grid/root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The contents of "dbhome" have not changed. No need to overwrite.
The contents of "oraenv" have not changed. No need to overwrite.
The contents of "coraenv" have not changed. No need to overwrite.
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User ignored Prerequisites during installation
OLR initialization - successful
Adding Clusterware entries to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.mdnsd' on 'svphxwgdbprd06' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.gpnpd' on 'svphxwgdbprd06' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'svphxwgdbprd06'
CRS-2672: Attempting to start 'ora.gipcd' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.cssdmonitor' on 'svphxwgdbprd06' succeeded
CRS-2676: Start of 'ora.gipcd' on 'svphxwgdbprd06' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'svphxwgdbprd06'
CRS-2672: Attempting to start 'ora.diskmon' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.diskmon' on 'svphxwgdbprd06' succeeded
CRS-2676: Start of 'ora.cssd' on 'svphxwgdbprd06' succeeded
ASM created and started successfully.
Disk Group DATA created successfully.
clscfg: -install mode specified
clscfg: EXISTING configuration version 5 detected.
clscfg: version 5 is 11g Release 2.
Successfully accumulated necessary OCR keys.
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Failed to initialize Oracle Cluster Registry for cluster, rc 105
Oracle Grid Infrastructure Repository configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6818.

The document references posted already are very good ones. However, I would say that on personal experience (on Solaris and 10gR2) that the addnode tools gave me nothing but problems. Luckily, I was able to build a parallel cluster (with three nodes) on other hardware and then move the databases across via DataGuard. It was quicker and cleaner (and easier!) that way...
Good luck!

Trying to add a new node to OAS

I'm trying to add a new node to our OAS server, and it always fails. Any hints on what I might be doing wrong?

every entry in an ldap directory must have some mandatory attributes, e.g. "objectClass". which objectclass your entry should belong to? add the objectClass-attribute to your entry!
Regards!
Rainer

New Nodes and writeXML

Similar Messages

Maybe you are looking for