New PC System Failure HELP!

Hoping for some help here on this one. I just got a new system and when launching the setup of XP it would hand on starting windows setup.
Here is the system I am working on
MSI K8n Neo4/SLI Mainboard
MSI Turbostream 450w PS
MSI 7800 PCIE Video Card
AMD 64 3700+ Proc
WesternDigital SATA 74g Raptor
Sony DVD Drive
2 GIG's Corsair Value RAM
Sweet huh?! Well I was rather puzzled and unsure as to what the problem was so I did what any tech does and began eliminating the problem. I removed all add on's that came with the motherboard and any extra peripherals went to a base default scheme on the bios and crossed my fingers. Nothing changed. I began dismantling my other box and first thing was first swap hard drives. Now I didnt have an extra RAPTOR laying around so I went to my EIDE drive with XP preloaded and on boot it hung too! I had it do a safemode boot and it hung on a particular file AMDAGP.SYS. So why would this be having a problem loading the AMD AGP Bus Driver?
I began hitting the forums and it says to update this file in the SYS folder to AMDAGPXP.SYSs . Kinda hard when you havent loaded an OS. Any ideas out there what is causing this? And secondly, any suggestions on how to get my PC up and running with XP?
Thanks,
Robert

Quote
MSI K8n Neo4/SLI Mainboard
Quote
So why would this be having a problem loading the AMD AGP Bus Driver?
Your board has no AGP slot, yet the existing IRQ's on your new board are set for PCI-e slots, and no programs for AGP are "understood" by PCI-E.

Similar Messages

  • . Got a new operating system. need help syncing

    Need help replace operating system.Backed up itunes. reinstalled itunes. when i try to sync iphone it says that it will delete phone and replace with this new library. dont want to lose any new content on phone.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I have a 6500 officejet printer that says ink system failure what can i do to fix this if anything??

    my printer 6500 office jet says ink system failure help??

    I am having the same problem, but there is not error code associated with the message.  It says: "Ink System Failure.  Please turn Printer off and then on."  No additional codes or instructrions. 
    I have tried to clean the heads without any luck. 

  • I have one account, but use it as two for years.  One is home, one is work.  Recently we upgraded to Windows 7 at work and a new email system.  Now I can't download music at work; work tech support can't help but said to use my work email address. Failure

    I have one account, but use it as two for years.  One is home, one is work.  Recently we upgraded to Windows 7 at work and a new email system.  Now I can't download music at work; work tech support can't help but said to use my work email address. Failure.
    Could it be a new work firewall associated with the upgrades?  How can I resolve this?

    I have one account, but use it as two for years.  One is home, one is work.  Recently we upgraded to Windows 7 at work and a new email system.  Now I can't download music at work; work tech support can't help but said to use my work email address. Failure.
    Could it be a new work firewall associated with the upgrades?  How can I resolve this?

  • Can Anyone Help With........System failure: CPU=0:Code=

    Trying to help a friend diagnose an issue with her I-Mac. It's running along fine then all of a sudden it freezes and a black window comes up with white type which reads System Failure:CPU=0:code=00000007(unaligned stack) Latest crash info for CPU0: (then about 9 lines of descriptive code which I have if it helps)
    Sounds like a processor error to me, but don't know. If anyone can help it owuld be sincerely appreciated.
    thanks,
    Rodney

    Hi there & welcome to Apple Discussions...!
    I'm wondering if the processor is over-heating? Is that a G4 iMac?
    The model and configuration would determine several factors.
    If possible, a sensor software may be able to tell if the computer
    is over-heating; but if it is too old a model, there would be little
    if any information from the processor. Some don't have a sensor.
    If the computer has been worked on, and the upper section opened
    beyond the place where the second RAM and wi-fi card hides, it
    may be possible the thermo-paste and thermo-couple may need
    to be looked into; since this is important. If the factory RAM slot
    has seen an upgrade, or if the clock battery replaced, or maybe
    if the hard disk drive was upgraded; these require the upper part
    of the iMac G4 to be opened. And it is a tedious process...
    And if that is an iMac G5 or maybe a newer Intel® powered iMac
    the question of overheating or other hardware issue may remain.
    Good luck & happy computing!

  • HP C6180 (wireless) gives "Ink System Failure" when trying to print from my new Windows laptop

    HP C6180 (wireless) gives "Ink System Failure" when trying to print from my new Windows laptop

    Hi @Maxuss,
    Thank you for visiting the HP Support Forums! I see you are getting an 'Ink System Failure' on your HP Photosmart C6180, so you are unable to print. 
    Please complete the steps listed here: An 'Ink System' Error Code Displays on the Front Panel
    If after the reset you are still getting the error message, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart

    I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart. Printer is Hp Photosmart c5180

    This article should help resolve the error you are getting:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
    Give the steps a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

    I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

    Prep your new drive:
    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    After formatting has completed quit DU and return to the installer. Install OS X.

  • Installed new RAM and now got System Failure: cpu=0 error

    This is so frustrating! I installed a 1 GB RAM chip (4200) in addition to the original 512 RAM. I turned on the computer, everything started and was working. I went in to the System Profiler and it was showing RAM as ok, but it had this: (Reversed) <-- in the name. I thought it was odd, but it was at least showing up. I quit iCal and I got a screen full of code with errors - the one I kept seeing was a kernel error. There was also a message that I needed to restart. I did - then it would not come on (fan was running, no video). So I shut down, took out the RAM, put it back in and let it sit for a few hours. When I turned it back on, it started up and I was able to log in to Gmail and created a message reply. In the middle of typing, I got an error that starts out with "System Failure: cpu=0; code=000000004 (No saveareas)" There's a lot more (about 1/3 of my screen) and the last line says "Waiting for remote debugger connection." I live about an hour and a half from a Mac store, so if I have to get there, I can....but does this mean I have a bad RAM chip or just a bad computer?

    Odds are that it's a bad RAM module. People report many problems even with RAM modules that supposedly meet the printed specs. This is why a vendor that will easily replace modules is helpful.
    Go back to the original 512MB only and see if the computer at least works. You might also try swapping sockets. It's possible you may have exacerbated the dead RAM socket problem, or even just have lint or dust in the sockets.

  • HT4623 During my update to the new operating system I am unable to get past Rescue EMail. I tried not putting in another e-mail as it says it is optional - that did nto work. I entered a Rescue E-Mail and it will not allow me to go to the next step. Help

    During my update to the new operationg system I am unable to get past the Restore E-Mail. I first chose not to have an "optional" restore e-mail and was unable to get past this section. I then entered an alternate e-mail with the same results. I am unable to get past this section after I push the Next symbol. HELP!

    I am having the same problem.  I think I saw something about VPN and not being able to communicate with Apple web site.  Do you have your protected company email on your phone?

  • Please help. Since upgrading the new operating system I cannot manage my music through my car

    Please help. Since upgrading to the new operating system, I cannot play my music on my IPhone 4S. I used to use the USB cable and manage my music that way, now it won't even support the auxiliary cord.

    What happens when you try?
    Have you tried basic troubleshooting from the User's Guide?

  • HT4623 I just updated my Iphone 4s to the new operating system and lost ALL MY CONTACTS on my phone. Everything else is there. HELP!

    I just updated my Iphone 4s to the new operating system but lost ALL MY CONTACTS on my phone. The contact list on my phone is completely blank. PLEASE HELP!

    Hello 6underwood,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.
    Best of luck,
    Mario

  • Post gong black strips with white type. System Failure: cpu=0;  etc. HELP

    I happened to plug in a palm pilot dock unit to my keyboard while my machine was booting up and although it may have noting to do with it, I now have the grey screen with the system failure message. The first line ends with "Corrupt Stack" and it goes on with "unaligned frame address" etc.
    I tried to boot from the Tiger install disk, but no luck and the same result. Booted and held the x key. Booted and held the c key. Nada.
    Is it dead?
    Steve

    Weird...after closing down and rebooting with a Tiger install disk (which my drive wouldn't read), and holding down my mouse buttoms, it's back like nothing ever happened. I just cleaned up my permissions and will now look for some utilities to figure out what's up. I'm getting a new iMac in a couple of weeks, so hopefully Ole Bess will hold up until then.
    Steve

  • Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

    Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

    The latest version of iPhoto which can operation with OS X 10.4.11 is iPhoto 7 which is part of iLife 08.  You might be able to find a copy of iLIfe 08 on Amazon.com or Ebay.com.
    iLife 08's full system requirements are:
    Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
    iMovie ’08 requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0 GHz or faster), or an iMac G5 (1.9 GHz or faster)
    iDVD ’08 requires 733MHz or faster processor
    512 MB of RAM; 1 GB recommended; high-definition video requires at least 1 GB of RAM
    3 GB of available disk space
    DVD drive required for installation
    From: http://support.apple.com/kb/HT1010
    OT

  • After downloading the new operating system to my 3GS, all the events in my calender are doubled!!   HELP PLEASE!

    after downloading the new operating system to my 3GS, all the events in my calender are doubled!!   HELP PLEASE!

    did you find a solution for this?

Maybe you are looking for

  • Is there a way to show the current URL for a WebHelp topic in the browser?

    RoboHelp 11, WebHelp. When I open the WebHelp project, the URL displays the start page for the Touchstone Help project: ..../Documentation/Touchstone/Content/Content.htm. As I go to different pages in the Help, the URL never changes. Our client consu

  • Weird font being used in player

    For a while now, in my Flash player embedded in my browser (any browser I use), a weird font shows up for some of the text. Here's a screenshot of what I mean, taken in Firefox (you can see the font in the band name at top and on the song titles): Th

  • Quick selection tool always contains minus sign

    I am obviously not a very experienced Photoshop user and I have a question about the Quick Selection tool. I am using CS6 on a Mac with OS X 10.9 Mavericks. I watched a couple tutorials and my system is behaving differently. In the tutorials I watche

  • PO's by fax

    Hello, I have a issue that supplier is not recieving the PO's by fax. can any one suggest the reason for this?

  • Oracle OleDB Provider VS MS OleDB Provider

    I am using Stored Procedures in Oracle Packages and Microsoft ADO for data access. My Stored Procedure use a Ref Cursor output parameter to make data available to ADO's recordsets. A big difference in network traffic is found between "Microsoft OLEDB