New plant created, how to create/configure personnel area & sub area for it

Hi Gurus,
I am very new to SAP HR, our clinet has plans to open a new plant for their organization.
Now we need to create a personnel area and personnel sub area.
Can you please explain how to configure the Personnel area and sub area through SPRO for the new plant?
Also, is it neccessary to assign the newly created PA and PSA to already present employee subgroups?
Thanks in advance.
Akash.

Hi,
You can create PA & PSA thru
spro : Enterprise structure - Definition - HRM - PA & PSA
spro : Enterprise structure - Assignemnt - HRM - PA to CC.
There is no direct relationship between a plant and PA&PSA info.
You can either create PAs inline with your plants or not.
It depends on your firms's enterprise structure.
There is no assignemnt between PA & PSA and employee groups.
You need to only assign newly created PA to company code.
Regards,
Dilek

Similar Messages

Can I create an Apple ID sub account for my kids to use?

How do I create an Apple ID sub account for kids to use?

Your best bet is to create an Apple ID for them, enable and use restrictions on the devices.
http://support.apple.com/kb/HT4213

I got a new computer. How do I make this the primary pc for all of my apple devices?

I purchased a new pc. How do I make this the primary pc for iTunes and all of my apple devices? I need to know how to take all Itunes files off old pc and put on new pc. Also, disable old pc.

Backup your library using this User Tip.
The same tool can be used to backup other important user data.
Deauthorise the old computer
Restore the library into the music folder of your new profile. (Use the same tool as for the backup)
Install iTunes and sign in to your account.
tt2

How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "?

Hello SAP Guru's,
How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "? We have implemented SAP ECC 6.0 EHP4 version in the organization. If anybody have any idea, need help .
Thanks in Advance.
Prashant Kunjir

Have a look at the following note:-
Note 1573200 - How to restructure the statistic data of the sales information system (SIS)
But before trying to carry out the process as detailed in the above note, first check with other SIS reports like MCTA etc., and no reports are showing correctly, then you can proceed. Otherwise, you need to raise an OSS message with SAP.
G. Lakshmipathi

Updation of Personnel Area for a position and an employee after hiring.

Hi Experts,
I have query regarding Personnel Area updation for an employee.
Here is the scenario :-
An employee was hired to a Position with personnel area "A". In future, the Personnel area for this position is chnaged to "B". Now the PA for this person doesn't get updated automatically.
Could you suggest how do we update the PA for an employee?
Thanks
Niharika

Hi Niharika,
If the personnel area of an employee is getting changed then that can be done by executing organisation re-assignment/ transfer action.
Regards,
Chetan
Hi Niharika,
In Set up personnel actions please mark the country reassignment indicator. Hope this will work.
Regards,
Chetan
Edited by: Chetansw on Jun 23, 2009 12:48 PM

How to get the depreciation areas for an asset in particular period

Hi frndz,
how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
Thanks and regards.
Harisumanth.Ch

Try table ANLB, then read ANLC.
Regards.

Update personnel area for the same position

Hi,
I have to update the personnel area for the same position. The personnel area has been updated in OM side.
What should be done to get the same value in Infotype 1 ?
I tried using lsmw . But, personnel area field is greyed out and Iam not able to change it .
Thanks in advance.

Hi,
Please check if this [link|PA30(URGENT); is useful.
Regards,
Srini.

How to create a text area for a blog that scrolls independent of the webpage.

I want to create a boxed area (Middle 2/3 of page) with text in muse that scrolls up and down independently of the webpage itself. I am trying to create a blog posting on the page and the reader can scroll down on the text but the page (background image) stays static. See Shades link for example. This is a retail store using the same function for posting product.

i'm trying to do the same thing, but with a section of images that scrolls independently of the rest of the page. i haven't found any way to achieve this yet, but i will keep looking and update you if i find anything. good luck!

How do I configure a deployed webapp (war) for access without port numbers

Using WLS 11g.
Have created a managed server called "DeplymentServer". This managed server is listening on port 9005.
I have deployed a war, webapp, and selected the DeploymentServer as its "target".
The war file was originally on our 10g OAS and deployed as OC4J and I made no changes to prior to deploying to our 11g Weblogic installation.
On 10g we used to be able to call the webapp directly from one of our webpage like this:
https://cxxxxx.nswc.navy.mil/wizardapp/wizard?REQUEST=Change_Request_Form
Now on 11g I have to remove the "s" from https and include the port. So now my url looks like this
http://cxxxxx.nswc.navy.mil:9005/wizardapp/wizard?REQUEST=Change_Request_Form
I am currently testing this behind a firewall so http will work here as will the port, but when we go live these won't.
My questions are:
1) Is there a way to configure the webapp deployment or the managed server, so I don't have to include the port number to access my deployment?
2) How to I configure so I don't have to remove the s from https.
At the moment question 1 is more pressing.
I think If I can get question 1 squared away question 2 may get corrected as well.
Thanks in advance for any help.
Steve.

Hi Steve,
Port 443 is the default HTTPS listen port for Servers...so to access an application using : https://cxxxxx.nswc.navy.mil/wizardapp/wizard?REQUEST=Change_Request_Form .... You were not needed to provide the 443 protocol in the URL because ur Server (Or the frontend proxy) was also listening on 443 SSL port.
Now as u want to use HTTP Protocol...(Port 80 is the default HTTP listen port so it will not be visible in the URL)... So you have 2 options now:
Option-1). Either u change the Server Port to 80 (Server in which ur Application is deployed) so that the Port will not be visible on the URL.
Option 2). Install a WebProxy (on Port 80 infront of the WebLogic Server)...and by pass the requests to the WLS through the Proxy. like: http://weblogic-wonders.com/weblogic/2010/05/13/apache-proxy-as-static-content-repository/
Thanks
Jay SenSharma

Trying to create two login areas for one site

I'm currently creating two different login areas for the site. One for my client to update content and one as a media/press area for downloads. Both areas work fine but it seems I can only do one login area because even if I use a different Connection script, one login area overtakes the other and you
're stuck with one setup instead of two. How can I work this so each area has its' own separate login area?

Instead of having two login forms, have one login form and utilize the user level controls. You will need to go to the login settings page and set/use the Level field on the database tab and then configure the user levels on the user levels tab.
You simply route users to different subdirectories and then secure the files for those two user directories using different user level permissions.
This removes the needs to maintain multiple connection files.
That said, do your two different login forms have different names? Different ids? Different targets/actions?

New document alert: How to get PDF documents into Adobe Reader for iOS

Opening PDF Files in Reader for iOS (iPhone and iPad) has been very helpful to many users of Adobe Reader for iOS. However, Apple has drastically changed the user interface in iOS 7, which made the original document obsolete.
According to Apple Developer Support's App Store Distribution page, 89% of devices connected to the App Store are using iOS 7 during a 7‑day period ending June 29, 2014.
Because of the exceptionally high iOS 7 adoption rate, Adobe Reader for iOS version 11.3 now supports iOS 7 only.
Here are the new How-To documents for iOS 7.
How to get PDF documents into Adobe Reader for iOS (iPad on iOS 7 version)
How to get PDF documents into Adobe Reader for iOS (iPhone on iOS 7 version)
(It had to be split into two separate documents because each contains way too many screenshots.)
Hope these documents are as helpful as the original one.
Please let us know if you have any feedback or suggestions on the topics for other help documents/tutorials.

Dennis (or any Adobe rep),
Any updates to the OP's question? I'm with a large government agency, and we're moving away from GoodReader for reasons I can't go into here, and the ability to add user-defined bookmarks within the app is a mandatory feature for the document reader we select. I have the latest version of Adobe Reader (11.6.1) installed on my government iPad, and the ability to add user-defined bookmarks still seems to be missing. Does Adobe have any plans to add this feature, or is it already present and I'm simply overlooking it?
Thanks,
Cam

How do you configure the ADC on RIO7833R for differential inputs?

I use the 7833 RIO board; my signal source is a differential signal.
According to the documentation I can configure the inputs to be differential using software, but I have not been able to find any instructions on how to do this. Can anyone point me to a way to achieve this?
There is the obvious "braindead" method of putting the positive signal into AI0+, and the negative signal into AI1+, then subtracting - but that would only allow me to use 4 inputs, not all 8. And it would probably increase the noise due to ADC nonlinearity. The diagrams show a MUX, I just can't seem to find a way to configure it and the default mode appears to be single-ended.
Thanks a lot for any information!
Floris HJ.

That's great help, thanks Prashanth. It answers the question which I asked, not the one I wanted answered. So now the 64 thousand dollar question (from the days when that was still a lot of money):
Can you do the same thing from software? In other words, could I set up my VI so it can change input mode in response to a user input or other external condition, and that doesn't require a user navigating to the project explorer? It would appear that there is some direct access of flash memory going on. If we know the address, could we poke that register directly (perhaps from the FPGA code itself - obviously we'd then have to signal from the host VI to the FPGA code but I know how to do that).
Thanks in advance for any help.
Floris

I have a new time capsule how do you turn up the transmitting power for wifi

I have a new time capsule how do you turn up the transmitting power?

Transmit Power is set by default at 100%, the maximum allowed by law.
There are no settings to allow higher output.

Why do we need a new PA (PErsonnel Area) for retirees?

Hi guys,
I have seen this at many organizations that they have a separate PA for retirees. Why do they do that? Please explain.
Thanks,
Jess..

Hi Jessica,
There are many groupings that are determined according to personnel area & subarea of employees including premiums, primary wage types, appraisals, leave types, time quotas, work schedules, pay scales, etc.
Thus, if retirees have different rights than normal workers in one of these groupings, then making the retirees a separate personnel area or subarea would make sense.
Regards,
Dilek

New User Question: How do I find ALL of my setting for my layout once I'm working on it?

I'd like to get screen captures of my settings for each project I do so that I have them for refference.
Thank you!!!

OK, I think you're basically on the right track, but I think converting your files to templates might be more useful than printouts. Templates contain the master pages (which is where margins and columns are typically changed from the defaults set during initial Document Setup (or they may not be changed from those defaults at all), all the styles defined for the project, and all the color swatches that have been defined, so you don't need to reinvent the wheel, only choose from among the available selections. They can also have page elements (headers and footers, page numbers, placeholder frames for standard layouts, etc.) predefined or in place.
You can make any file into a template just by saving as one (File > Save As... and choose Template from the file type dropdown), or by changing the file extension to .indt. The only functional difference between a document file and a template file is that when opened "normally" documents open as original, so you are editing the actual document, and templates open as an untitled copy, so you are editing the copy and won't accidentally change the template. You can delete essentially all the content (other than objects on a master page) from any file and save as a template and have everything you need to make a new file using the same parameters.
There are scripts available to tell you what styles are defined in a document (you can google for InDesign Style Reporter script, I think), and there may be others that will give you other parameters. There may be something like that in the Blatner Tools plugin, too. If you want one comprehensive script you may need to pay someone to custom write it for you, but it would be worth a trip to the scripting forum (InDesign Scripting) to see what is already written that might help you if you want reports.

New plant created, how to create/configure personnel area & sub area for it

Similar Messages

Maybe you are looking for