New post old problem

I have an iPod Touch, it was fine 2 days ago but when I looked at it today the screen was blank, just a lit blank screen. I tried pressing both buttons and resetting it, I tried restoring it... it syncs fine, there is just no information on the screen what on earth can be wrong...please iPod Gurus HELP!

Armando,
Thanks for this, but I don't believe that I have a mix of formats on the camcorder. I set it for 1080i and there it has stayed ... I have just checked it. Only AVCHD files reside in the camcorder.
By the way, Toast works well, but it's not really a solution to the main problem with FCP!
Best
Wilfredo
Am I right in thinking that Apple check over our posts? And if so, could someone respond with a possible solution?

Similar Messages

"My Subscriptions" new post alert problem

Recently I have noticed that the "My Subscriptions" link in Discussions no longer always removes the blue dot indicating new posts in the list of subscribed topics if I have already read the post(s) while browsing through the forum.
This only occurs in the "My Subscriptions" page -- if I browse the forum topic list or click on the "My Subscriptions" link to take me to the topic, those pages do not show any blue dots or "new!" markers.
It doesn't have anything to do with how recently the topic was last posted to; some items already read several days ago are still marked as new on the "My Subscriptions" page while others read more recently are not.
Has anybody else seen this or is it something peculiar to my account?

ali brown wrote:
I just open the Thread again, to eliminate the
The problem with doing that is I still have to scan the thread for "real" new posts since there is no way to tell from the "My Subscriptions" page which actually have new posts & which don't. If the thread has only a few posts, this isn't much of a hassle, but if it does I have to resort to using the "Find" command in Safari & searching on "new!" to make sure I locate any that really are new to me before leaving the thread. If I don't, I run the risk of marking all the posts as seen/old just by opening the thread & then moving on. That is a hassle I would like to avoid.
Anyway, thanks for confirming that I'm not alone in seeing this.

New illustrator - OLD problemS (mac) of course

Change fonts with keyboard = No (too bad) (essential feature) Microsoft Word do this
Divide (length) look here nice scripts = No (too bad) Corel 5 do this. Add Anchor Point tool add lot of points where you dont need.
Change Blend mode with keyboar = No (bad)
Aling and distribute tool = dificult to undestand Icons to page, to selection combobox = slow option
(best option, radio button or check box)
Four essential features to SAVE TIME
Stop to create new tools and solve old problems
Sorry my english!

Yes, I agree with you. If you thought I was not agreeing with you that shows you how bad my written english can be.
Ok actually having the prototypes as visuals are very helpful you should file a feature request.
Here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
And with your permission I will try to send your mock ups to someone who might possibly be able to do something with it. And there are one or two contributors to the forum who hopefully will see this and they might have some influence as well. But I agree there should be a rethinking about access to the panels and they should be accessible in at least some degree by way of the keyboard.
As far as the comments about your english n need to thank, it was all my pleasure.
I will try and you should as well you cannot attach your visual to the feature request but you can mention in the request that you have created such a visual. Adobe might actually be interested in seeing them.
But they are good solid suggestions.
The changing of the fonts in the way you suggest might actually work on the windows platform and if you have the text highlighted you the change is reflected on the canvas as you scroll. Long sort after request. There are however some Mac users who are opposed to this feature? It is not really clear why they are opposed.

WRT54GS New Firmware Old Problems

Hi , I have a WRT54GS v.5 and updated the firmware from its original v1.52.0 to the latest v1.52.2 last week. Since then, the router hangs after 2 days in mixed mode. I first thought it was skype, with all the recent problems, but it wasn't. Eventually, its all access. A search on this problem suggests this is an old problem, resolved a year ago in prior firmware releases. Now I'm wondering if somehow this fix was forgotten in v1.52.2. The kids PSP's dont work set to G, so I have to go back and forth. Before I roll back this firmware upgrade, is anyone else experiencing this problem since installing v1.52.2? Scott

Help...I had this resolved for months....I cant get by a day without my GS going offline. I don't want to buy another $35 Netgear that has so far, run for 6 months....This is frustrating. This router is back to doing the same thing it did when I first bought it...For a while, setting to Wireless G had this resolved...Now its a show stopper, because I switched to Skype for my home phone... I put the router back to factory settings, and rebuilt from scratch with latest firmware. Every 5-6 hours, off the internet it goes. Wireless and LAN ports. My Comcast provided WEBSTAR modem detects a link, and the access lights are going crazy, but can't make anything out of them. I'm wondering if.... Has anyone seen an ISP disable devices running p2p apps? In this case, Comcast wold detect Skype, direct competition to digital voice, and kick my network off. Just guessing here. Please help me...

Photoshop CS4 - new report, old problems

Hi there,
although i have posted many of the following problems in another thread, i will recall them here, because the other thread has gone slightly off-topic.
I have been "using" Photoshop CS4 that came as part of my Production Suite Premium Package for as long as it is out now and i have to say, that for me it is the worst release ever.
I work with Photoshop since Version 3 and every new release has had it's flaws that were fixed after a while. So i really hope this might also be the case with CS4.
So here are my System Specs again:
Intel Dualcore E8600
NVIDIA Geforce 9800 GX2 (Driver: 180.48)
MSI P35 Neo-2 Motherboard (Bios: 1.90)
3 GB RAM
Wacom Intuos 3 A4 (Driver: pro610-5)
Windows XP (Service Pack 3)
The System is brandnew, the Windows-Installation is fresh, before the CS4 Suite there has not been another Adobe-Program on the machine.
While I am quiet happy with the other programs (Illustrator, Flash, After Effects..even Bridge is starting to become useful), Photoshop CS4 shows several glitches and problems on my system. These are:
- If activated, the GPU-OpenGL setting deactivates randomly. There's no obvious reason for this, just in the middle of work, the rotate canvas-tool is no longer available, zooming is no longer smooth. While the box in the preferences is still checked for OpenGL and my graphics-card is recognized correctly, OpenGL features just stop working. After I close and restart Photoshop everything is normal again, until the next time settings are deactivated.
I am so far not able to trace the reason for this behavior, seems to happen quiet random.
- No "marching ants". In the same matter, the "marching ants" of selections sometimes disappear. While this is not a big problem I think i should note it here for reasons of being accurate.
- Brush tool stops working. I have this quiet a lot. While I paint, the Brush suddenly stops working completely. It produces neither strokes nor blotches anymore. In some cases hefty drawing can result in some strange straight lines but the brush tool can only be revived by restarting Photoshop.
- Crashes. I truly honestly haven't had a crash with CS2 and CS3 ONCE. With CS4 crashes seem to be quiet normal at this point. The application simply freezes, mostly while using the transformation tool. Killing it via the windows task manager is the only option.
- Slow redraw. All the above mentioned problems did occur with OpenGL enabled AND disabled. It really makes no difference. So deactivating this new thing doesn't convert Photoshop back into something useful, but into a slower version of CS3. Redraw of images is considerably slower on CS4 without OpenGL, than it was on CS3, although it gets better after some time working with it. Moving a maximized Image around feels very strange, because the build up of the tiles is somehow slow and sluggish.
- Features I used are no longer there or no longer functional. I use Layer-Comps a lot. With activated OpenGL the Script "Layer Comps to Files" does not work. It produces an error-message that reads:
Error 1: Unable to create Window - OS error (1400) Line: 234 -> dlgMain = new Window("dialog", strTitle);
With OpenGL deactivated it suddenly works... no idea why.
In addition some features like the automatic web gallery creation have been removed from Photoshop, but i figured out how to get them back.
While these are the really bad things about the new version (on my system that is, I heard from Mac-Users who are quiet happy with PS CS4 and keep telling me how fast it is on a Mac.....) there are other things, that i don't understand. I reckon, Photoshop cs4 is first of all a Mac-product and the PC-Version is somehow adapted or converted.
Proof of this for me is the new window behavior. Windows steeling focus and blocking sight on palettes is new for a long time PC-User like me. I also don't understand, why maximizing an image does fill the complete screen thus exterminatin

While I can not help remedy your problems, Pickman, I can tell you I have mostly the same problems as you. I am not the only one either. I hear this from my students. Marching ants disappearing is normal now, palettes hiding behind windows seems common nowadays. Photoshop losing focus, a document suddenly refusing to be the front one and having to minimize the other document(s) to have it back, lasso tool suddenly not showing it's tracing mark, it's all horrible. The error 'unable to create window' is very common.
I didn't even mention the fact that it's no longer possible to downsize the Photoshop window by it's top edge, which is utterly annoying when you have multiple windows open as I often have or the fact that when I scale the main Photoshop window, the documents stay in place and that the tooltips often don't work which is confusing for the novices that I train. I thought they had remedied that in CS3, but it's back in CS4. I have been using Photoshop since version 3 (briefly) then 4, 5 et cetera. This is one of the worst releases ever.

New topic, old problem: Airport Express dropping out

I'm aware of the many threads on Airport Express issues on here but since no solution has emerged I feel I must rake over it again in the hope that someone at Apple will pick up the ball and create a fix for AEX BDS or Bizarre Dropout Syndrome as I call it.
Playing my iTunes music, via my 2T Time Machine>MacBook>AEX (extending my network to the basement) used to work seamlessly until...approximately... I upgraded to Leopard>Snow Leopard although if I'm honest I can't swear to this coincidence. Anyhow the symptoms are the similar as other ppl report elsewhere on this forum: ie Connecting prompts a microburst of a tune then randomly more bursts of varying length, never longer then 15secs, then after an hour or so it suddenly decides to play continuously for 4 or 5mins at a time but always dropping out again ad nauseam.
I called Apple tech support who could only offer it was interference from neighbour's WiFi networks at work, I checked but my neighbours are all on different channels to me. I have tediously checked, rechecked, rebooted, reconfigured, reinstalled iTunes and OS, moved the unit even tried a brand new 11n AEX but to no avail, always the same problem (so at least I can rule out a hardware issue with the AEX unit itself). I'm hoping there is a fix out there.......otherwise the AEX units are just very expensive paperweights.

I do not know if this answer will help much, but it is based on solid experience.
I tried using wi-fi and it kept dropping out. I went through 3 routers! A local salesperson told me enough with the new routers, it's your d*mn ISP.
Well, I started using speedtest.net to monitor my ISP's performance/signal strength. I discovered that my signal FREQUENTLY dropped to very low levels.
My theory is that whenever the signal dropped, which was very, very often, I lost wi-fi connectivity.
I went to ethernet and never looked back, but with all these wireless devices, I'm wondering if I need to take a look at wifi again. My ISP has cleaned up its act, so I might do better.
Unfortunately, I haven't tried it yet, so I can't announce the results. But I thought it might possibly relate to your situation.

IMac G5 Leopard Install (New Question, Old Problem)

I've been through a number of the boards over the last two weeks, but I have yet to solve my install problem. I bought the Leopard family pack and promptly installed on my intel mac mini (no problems). However, I have not been able to install on my iMac G5. After I insert the Leopard disk, go through the various prompts and restart the Mac, all I get is a grey screen the spinning pizza. I never get the option to "archive and install". I have gone through the terminal and removed some of the application enhancer programs (as noted in earlier posts). However, the result is still the same. Am I doomed to backing up my disk, wiping it clean, and installing Leopard at that point? Beforehand, thanks for any advice and help.

When I insert the Leopard DVD, it does boot and the "install leopard" icon appears on the screen. After clicking on the icon and inputing my password, my Mac restarts. At that point, I can hear the DVD turning in the drive but the only thing that comes up is the grey screen and the turning circle.

New release, old problems...

Hello,
I tested the new release for dynamic assignment of endpoint references. Now it must be specified the <wsa:Address> child of <wsa:EndpointReference> even if the BPEL engine reads only the "server location" from it, and not the "service location", whose name must be specified in the other child <wsa:ServiceName>. An important new feature is that now it is not necessary to specify <binding> and <service> in the LoanService.wsdl, according to BPEL4WS 1.1 specification (in fact I deleted them from the LoanService.wsdl)! But the WS-Addressing specification says that only the <Address> field is mandatory and it must contain the "service location" and not only the "server location" (i.e. "http://localhost:9700/orabpel/default/UnitedLoan" against "http://localhost:9700/orabpel/default"). In fact the engine reads the service name only from the field <wsa:ServiceName> which shouldn't be mandatory.
However, another issue is the flowN activity: it doesn't work properly with dynamic assignment either with Correlation Set or Conversation Id, unless I synchronize the branches through a wait activity. The problem is that with the same partnerLink, portType, operation, correlation Set the engine throws a "conflictingReceive" fault according to the BPEL4WS 1.1 specification.
Could I send to you my project so that you can examine it?
Thanks in advance and sorry for my english

Marcello,
This is Alex Yiu, working on the BPEL product for Edwin. I am not directly on [email protected] Could you please cc my personal email address
( alex.yiu AT oracle DOT com) with your project "zap" file?
Thanks!
Regards,
Alex Yiu

New Itunes old problems...

Hi guys.
I updated my itunes to 11.1.2.32 in my Macbook PRO (10.8.5) and in my Desktop with Windows 7.
Before the update, home sharing was working fine. Now I got this problem:
On my windows 7 > My library on macbook appear and I can connect to it.
On my mac > The windows library doesn't show up!
Now I can't copy my musics from windows through home sharing on Itunes.

For starters, click on the Start Menu, click on Control Panel, Click on Hardware and Sound, Click on Device Manager, select DVD/CD ROM Drives and figure out which drive is your CD Burner drive that you are receiving the error code on, copy the model number of the cd burner drive & go to the manufacturers website and try to find what that error code means for that cd burner. It may be a problem with the burner and not iTunes.

Old Problem/New Problem: Lightroom can't find file, then finds, but won't edit it.

(Lightroom 2; Macintosh G5; OS X (10.4.11))
First, the old problem which, though unresolved, is here mostly for background:
A little over a month ago, I posted a question (at http://forums.adobe.com/thread/480423?tstart=0 ).
The short version of that problem is that certain previously accessible images were not able to be opened in Lighroom. The preview image appeared in the main window accompanied by this message across the top of it:
"The file named "[name of image/file]" is offline or missing."
When I right clicked on the image and selected "Show in finder" I got this message:
"The photo '[name of file]' could not be used because the original file could not be found. Would you like to locate it?"
Below which was shown the original path to the file. In the middle of that path, one or more folders appeared with colons in their names in place of the slashes originally part of the names (some folders have dates in their names). Following the path via the Finder, the file was exactly where it was supposed to be, although, of course, slashes appeared instead of the colons that were in the Lightroom summary of the original path, but Lightroom couldn't find them.
I was convinced that Lightroom was renaming the folders (but only in its interface; the original folders had correct names in the finder -- which is the only way they could have been named, since colons are illegal characters and won't be accepted as part of a file name). But I see now that there is some weird thing going on in the Finder itself. Even though I see the correct name on a folder when I search for it, or navigate through the hierarchy, if I click on the file at the end of that hierarchy (the file that Lightroom said it couldn't find) and ask for file info (via Command - I, or other method), the path to that file shows colons where slashes should be, but only in the names of the folders that were so named in Lightroom. All other folders with slashes in their names are listed correctly. So it's a Finder problem. Though this is still a mystery, I have been able to work around the problem. But how is this happening? (Note that I will be reformulating the question and posting it on the Apple discussion groups soon; I don't expect this forum to deal with Apple system issues. Just thought that others here may have had the same problem.)
Now, the new problem, possibly related to the old one:
In the same collection where I noted the previous problem, I selected an image that I wanted to print. The preview came up with this message:
"The file could not be found."
But when I right click on the image and select "Show in finder" it opens the correct Finder window with the file in question highlighted. The file, a TIFF, opens normally in Preview or Photoshop.
So why does Lightroom think it's not there? (even though it can show me exactly where it is)
I have edited this photo in Lightroom before. I have printed it from Lightroom before (as shown in the Lightroom history). But today it can't be edited, won't print and "could not be found"!!!
I know I can print from Photoshop, or re-import this photo into Lightroom (along with any others that Lightroom "can't find"), though both would require time and re-editing the original. I would rather understand (if that's possible) why this is happening in the first place, so hopefully I can avoid such wackiness in the future.
I realize that may have to burn some sage and hire a Shaman, but any ideas that won't smoke up the house or scare the cats would be most welcome.
Thanks for reading.
Leonard B.

If you have an old goat around that's not doing so well, consider the sacrifice.
The one thing that occurs to me besides the Gremlin, is the use of colons or slashes or some other character that the OS or LR doesn't like in some file name or other. I think you'd have to change same in Finder, then show LR where the images are.

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

New iPhone 4....same old problems

Hi folks, I'm one of the many disappointed iPhone4 customers and I hope you can help me out here. Yesterday I got my new iPhone4 and as I was expecting I have the common problems almost everybody else has: poor reception/lost of reception almost all the time. The previous iPhone 3G was working great but the new one is not. Mine came bundled with iOS 4.1. As I have read in this forums and many others there seem to be a bug in this version of the OS that causes poor reception and incorrect signal strength bars. I was wondering whether it possible to install the previous version of the OS, namely, iOS 4.0.5 (i guess that's the correct version number?) because I've heard that that particular version doesn't have this problem (I'm aware I will lose things like HDR but hey, I have a real camera for that so I don't care if the iPhone has or not HDR capabilities).
Is that possible? if so, how can I do it?
thanks,

Hi Malcolm,
You are reading reports from only the users who have problems. Users without problems don't >complain.
This is a weak argument. What should I do? read the complains of people whose devices work fine? I'm sorry but your answer to that sentence doesn't hold. Whenever you have problems with something you look for advice and comments of people that have the same problems. That's the way human problem solving works.
When the next version comes out you will see many people wanting to return to 4.1, which will
have suddenly become perfect.
Again, this is a thin argument. As customers who pay a LOT of many for electronic devices we want things to be functional. So, with the release of a new driver/OS version we expect the old problems to go away and, yes, new problems will come along because that's just the way software development works. So, if iOS 4.1 was supposed to solve reception problems how does Apple explains that after releasing v4.1 those problems are still here? Many people have reception problems, just read the forums. Again, we don't just a fancy electronic device, we want a functional thing. It's like buying an expensive rolex watch that does everything except telling you the time. Or having a Ferrari with a broken engine.
Thanks for the feedback! I'll keep testing the iPhone and if it doesn't get better in a week I'm afraid I'm gonna have to return it and keep using the old 3G until reception problems with the iPhone 4 are solved.

Problem switching from a non Idea Exchange board to an Idea Exchange board when typing a new post

Tested on Chrome/XP and IE8/XP
when I start a post in a non Idea Exchange forum and later on want to convert it into an Idea Exchange one, I can switch to the correct forum using the "Select Board" pull-down list. However, when posting, my post is refused because I haven't chosen a "Label". Well, that's because I can't!
In other words, switching to an Idea Exchange board does not add the "Label" options on the composition webpage, hence it is impossible to post that idea unless you copy it (or rely on the autosave function), start a new post directly into a Idea Exchange forum and paste your old post in it (or alternatively, load the saved draft once you have created the new post).
Disclaimer: this may have already reported, but as I said elsewhere, the Search function doesn't work either...

This is my first post so be gentle with me. I have a Pixi Plus running os 1.4.5. Last week we upgraded to exchange 2010 (or 14 as I've heard it called). I lost the connection on my phone. I tried changing the inheritable permisions above and it has not solved it. I'm pretty sure all the log in info I'm using is correct. It acts like it's communicating with the server because it says
Unable to sign in
Could not sign into account
THe mail server responded: bad login/password
I've changed several things and when I change certain things it says it cannot validate incoming mail server so I feel like I'm close but can't figure it out. Any help would be appreciated. Thank you.

When I first downloaded firefox I was able to blog on blogger. Now I can't see pictures on my blog and I can't create a new post. What is the problem?

I downloaded firefox last week and everything was fine. I was able to use blogger and add new post to my blog. Now my blog does not show the title picture and some of the post pictures will not show up either.
The page to create a new post looks funny and different from when I first downloaded firefox. The toolbox to edit the text/font is not there. The spellcheck is also missing. I can't add pictures or video because that is missing too.
I can use IE to blog, but I liked firefox better until these problems started.

No, you need to (re)install the current Firefox version.
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 13.0.x: http://www.mozilla.org/en-US/firefox/all.html
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.images pref should be 1.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Have new MC544LL/A and same old problem"The ipod cannot be synced. A duplicate filename was specified."Is this a "apple or Itune" problem?

Have new MC544LL/A and same old problem"The ipod cannot be synced. A duplicate filename was specified."Is this a "apple or Itune" problem?

I fought this problem for WEEKS with no success. iTunes on Windows 7 x64. I tried running it as Administrator. I tried every fix I could find here and on Youtube and nothing. Any time I was in iTunes and switched focus to another Window like Outlook or something it would pop this error message up again. I reinstalled iTunes from scratch. This did NOT fix it, but it gave me a clue. I figured it had to be my iTunes library which is stored on an external HD.
After poking around in the library for a while I thought it might be a file that had been set to Read Only so I did an "attrib -r e:\itunes /s" to clear all of them all. This wasn't the problem but it alerted me to a file it couldn't clear. The file was iT.tmp and it couln't clear that because the file was corrupt. I deleted it but that still didn't fix it.
I finally did a "chkdsk e:\itunes /f" and let it run through. It found the error in iT.tmp, fixed it and now iTunes works fine again.

New post old problem

Similar Messages

Maybe you are looking for