New problem with file name while exporting files

Hi all. Whenever I export files from Crystal, it converts the filename from mixed case to lowercase, i.e. Vendors.pdf or Vendors.csv becomes vendors.pdf or vendors.csv. The destination folder has other files of mixed case, it's not a setting on that side. Since this file is data for an upload, it's a problem. Can't find a setting in Crystal. Is there a fix somewhere?
Thanks
Robin

Hi Robin,
When exporting this is by design, most OS's won't allow the same name so it's mostly not an issue. You could write a small application that exports for you then you can rename it to anything you want.
Thank you
Don

Similar Messages

How to retain file name while saving file on archive servers

Hi Experts,
I am using function modules:
ARCHIVOBJECT_CREATE_TABLE and ARCHIV_CONNECTION_INSERT for inserting a file to archive server and for linking it with a document.
Then I am reading the URL using FM: SCMS_AO_URL_READ. When I get this URL and download that file, the file name will be always defaulted to 'pclHTTP.dll'. I debugged these FMs to a certain extent and found that this name comes from CREP_HTTP-HTTP_SCRPT table.
Is there any way I can retain the file name while saving it so that when I read the URL it has correct file name in it?
Please help.
Regards,
Anand Kolte

Hi Max,
In case when downloading one file it is fine. But if I want to download 10 files at once and later if I go to my downloads, every file will be having similar name. Unless we open the file, we cannot know what file it is.
Regards,
Anand

Problems with captions in the exported file

I export my sequence as a quicktime file and the captions should be embedded in the export file. But the exported quicktime file doesn't show the captions. Who can help?

Exactly what version of Premiere are you running?
What type of captions? CEA-608? CEA-708? Teletext?
When the sequence is loaded in the Timeline, can you see the captions in the Program Monitor?
When you say "captions should be embedded in the export file," I assume that means that on the Captions tab in the Export Settings dialog you set Export Options to "Embed in Output File." Please confirm.
How are you checking for captions in the exported clips? What player? Have you enabled caption display in it?

File Save dialog box not showing correct file name while saving file

hi
Currently, after the Submit button is hit, the File Save dialog box is displayed. If the user saves the file and then opens it then the output appears correct however if the user chooses to open the file without saving on the local machine then the correct viewer is not used to display the file. The name of the file is defaulted as qotSCopPrint.jsp and the default file viewer for jsp files is chosen to view the file. The format of the file is obviously not text (it is either pdf or rtf) so the output shows binary characters.

data : v_repid like sy-repid.
parameters : p_file like rlgrap-filename.
initialization.
v_repid = sy-repid.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = v_repid
            dynpro_number = syst-dynnr
            field_name    = 'P_FILE'
       IMPORTING
            file_name     = p_file.
Message was edited by:
        Chandrasekhar Jagarlamudi

Check CSV file name while uploading file?

Hi All,
I am uploading data from CSV file.. That part is working fine.
Now i want to check CSV file name. Ex : CSV file name = W1234H4321AB.
I want to check 6th letter, if 6th letter is eq 'H', i want to upload data otherwise should display some message.
I tried by reading this attribute, but i declared this type as XSTRING, i checked value after using get_Attribute in lv_datasouce. It contains some XSTRING value. How to get CSV file name??
Cheers,
Venkys.

>
Thomas Jung wrote:
> >I want to check 6th letter, if 6th letter is eq 'H', i want to upload data otherwise should display some message.
>
> Everything that you have been told about using the filename property of the FileUpload is correct. However you should note that the filename will not be available until after the file has already been upload to the server. So you can't stop the fileUpload based upon a check of the filename - its too late and the upload has already occured.
yeah that is true. but is there anyway to check it otherwise.
or we need to wait for something in coming versions 7.3 or 7.4.

Problems with Transitions in FCP Exported Files - How to Fix?

I have completed an HD 16:9 project which plays properly with transitions in FCP 5.1.4, but when I export it, the transitions have a momentary "blink" to black just as the they begin, and then they complete normally -- a very distracting annoyance. I tried several different transitions, and the same problem occurs. I also tried exporting to several different formats and the problem persists. I also tried applying the flicker filter and the deinterlace filter with no success. I would appreciate any help!

I would also check to make sure the frame rates between your media and sequence really match. This type of thing has also been seen when working with 24p DV50 material - renders such as transitions were showing time shifts and repeated frames.
If this is HDV, you might try isolating one offending transition, exporting the clips as AIC and rebuilding an re-rendering it just to see if it helps. If it does, you could probably use media manager to convert all of the clips in your sequence and reconnect automatically.
Hope this helps -
Max Average

Problems with image names when exporting - images that have come back into lightroom from photoshop

Can anyone help ? When I need to take an image from lightroom into photoshop then back into lightroom and then I export that image, the original file number disappears and is replaced by dashes. Does anyone know how to solve this ?
Thanks !

The appearance of dashes usually suggests some kind of pre-set e.g.
Wedding-20150106-0001.jpg
The only suggestion I can make is that you check to ensure you are using the correct parameters in the templates manager.
Photoshop Lightroom Reference Guide | Create Your Own Custom Filename Presets | Peachpit

Problems with special letters while export/import the application

Hi all,
I have a HTML DB with german letters in the labels and buttons. After the import of my application I have developed recently, alle the german letters are replaced with curious characters like Ã¶ instead of ö e.g.
Do you know a solution for this problem?
Thx!
Michal

Hi Michal,
1) What is the version of HTML DB?
2) What is your database character set?
3) What does the configuration of your Database Access Descriptor look like?
4) If HTML DB 2.0, have you applied the PL/SQL Web Tloolkit patch?
Joel

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

How to mass-reindex files with same name but different file extensions

(reposting cos I'm confused about if I posted in the proper place before. Please delete if it is a repost.)
So I'm on a remote workflow. I pick all the raw data and convert it in two quality standards, one on 'high' with full specifications and one on 'low' so I can send 2gb instead of 80gb of files through the internet for me to work remotely on, and to speed up the overall work rhythm because files are lighter. All I need to do is to work at my home with the low quality files, send it back to the client's computer after finished, re-index all files in their high resolution twins and we are good to go to finish the product with highest quality possible. But both high and low quality files need to be the same extension, that I picked .mp4 for it is the standard for pretty much anything.
The point is, if I want to go full mobile, I only have an old HP Pavillion notebook and I really need to work with a video codec that goes very easy on it. I can only think about some 16:9 DV format. But the point is, this format generates a different file extension than my .mp4 standard, and Premiere, to my knowledge, really can't reindex files using only the file name while ignoring the file extension. It really should. And I really need to know how.
We also need to consider Premiere versions that allow themselves to be installed at x32 processors. My desktop is x64 and I really have no problem to work on these standards, the problem is, in my notebook I really can't.
So, halp?

i want to say it was added in cs7, which requires subscription, so in that case might as well be using latest version 8. if you had to use an older version like cs5, you could still use h264 or low bitrate dnxhd/prores codecs inside a quicktime .mov file. that would allow you to have same file ext on both versions of files.

Is it possible to change each exported JPEG file name from "Export JPEG Slideshow"?

It is convenient to add each image name as a text on each figure by Slideshow.
Could I use each image name as the exported file name?
thx a lot!

Blendy,
You can follow the steps below to assign custom names to export files:
File Naming
Choose an option from the Rename To pop-up menu.
If you chose an option that uses custom text, enter the custom name in the Custom Text box.
If you use a numeric sequence and you don’t want it to start with “1,” enter a different value in the Start Number text box.
For more options, choose Rename To > Edit.
Source: http://helpx.adobe.com/lightroom/help/export-files-disk-or-cd.html
Also you can follow the video from the link below:
http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-and-when-to-rename- files-in-lightroom-4/
Let me know if you need more help on this.
Cheers!
Mandhir

Glyphs alignment change while export file to epub-fixed layout

Glyphs alignment should change while export file to epub, any solution for perfect export in fixed layout

Hi,
Are your documents in the book of different page sizes? Have you done any edits to page size using Page tool and not using Document set up dialog?
We honor only the document set up dialog changes and not the changes made to page size using page tool so this could be one of the reason for things going wrong.
It would be really nice if you could share your document on dropbox may be and share the link with me at: [email protected] This way it would be easy for me to investigate and tell you why this issue is happening.
Regards,
Pooja

How to exclude schema name from exported files (PL SQL Developer)

Dear all,
Just one question: I am using PL SQL Developer. My goal is to export some data (as .sql and .dmp files) from one database and to import them into the another database (both databases have identical structure - test database and production, just different database names and names of schema. In order to make it possible, I need to exclude schema name from generated export file. I believe that it is possible to do it automatically by setting up parameters of PL SQL Developer. How?
Thank you in advance,
Kindest regards,
Dragana

In the meantime, I have found the answer on my previous question:
Actually, the initial idea (how to exclude schema name from exported files) was wrong. No need for any intervention.
Trick is: Schema name can be changed during the import of exported files (PL SQL Developer during import gives possibility: From User (old schema) To User (new schema) .
Hope that this will be useful info for others.
Dragana

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

Strange problem with linking to external vob-file

I have a strange problem with linking to external vob-file. I
have created a link using BudApi:
on mouseup
set OK = baOpenFile ( the pathname &
"Files\General\Video\VTS_01_1.VOB", "normal")
end
This code opens mpg-videos correctly, but nothing happens
when I try to open vob-files with the same code. The strangest
thing is that when I change the default program for vob-files to
WinDVD this code works and the file opens, but when I change the
default program to Nero Showtime this code doesn't do anything
(when I open the file 'manually' from the folder, it opens
correctly on Nero Showtime). My client uses Nero Showtime, so I
really would appreciate any help on this one.

temes wrote:
>
quote:
Originally posted by:
Newsgroup User
>> When using Nero Showtime as a default program, the
error code is 31,
>> "There is no application associated with the given
filename".
>
> Which suggests that something has gone wrong with file
associations.
> If
> you double-click one of these files in an Explorer
window does it fire
> up Showtime and open the file?
>
>
> Yes, the file opens correctly in Nero Showtime when
double-clicking
> it in an Explorer. I tried the file associations and
created a
> html-page with a link to the vob-file, and the html-link
opens the
> vob-file correcly with Nero Showtime. My client reported
this
> problem, so it's not just my computer which is having
this problem.
If you open a command prompt, do you get an association
listed like this
example for .txt files:
C:\>assoc .txt
.txt=txtfile
C:\>ftype txtfile
txtfile="D:\Program Files\JGsoft\EditPadLite\EditPadLite.exe"
"%1"
Andrew

New problem with file name while exporting files

Similar Messages

Maybe you are looking for