New PSUB Servise for standby Server
Hi All,
I have configured Physical Standby Database for my OC Database and it is running fine, now I want to create new
PSUB service for my standby server so that when my Primary Database goes down I can make my stanby up and
start the PSUB, so that standby database can be used.
Thanks in advance !!
Regards,
OCADMIN
Hi All,
I have resolved the issue by creating new psub service for my standby database, following are the steps completed may help the DBA who wants to create standby database for OC database as DR
$] export p1=OCTDBPR
$] export p2=46
$] opa_setput
$] cd $RXC_BIN
rxcpsdps -install database-connect-string database-instance-name
rxcpsdps -install OCTDBPR STDDB
where OCTDBPR is primary database and STDDB is standby database.
Thanks,
OCADMIN
Similar Messages
-
New Apple ID for new server?
I'm setting up a Mac Mini to act as a media server. My family all has iphones and a few Apple TVs that this mac will be streaming to. Should I use a new Apple ID for this server's iTunes account or use one of our existing Apple IDs?
Hello zakirfromlecco,
Certificate errors such as this can occur as a result of incorrect information in Settings -> General -> Date & Time, as Apple servers and your iPad disagreeing on what time it is can cause certificates to appear invalid (out of date).
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Can't connect to the iTunes Store
https://support.apple.com/en-us/HT201400
Regards,
Allen -
Move Publisher backup to new server( Cold Standby Server) ?
We have CUCM cluster consist of 1 publisher, 4 subscriber and have installed a new node like another cluster's publisher(with diferent ip address from existing publisher) . When existing publisher goes down we will move publisher backup to new server and change publisher ip address to new server on existing subscribers.
is it posible ?
Our aim is using new server for publisher down issue.(like cold standby server but diferent ip address from existing publisher)
Or is there any better way to install publisher backup on on branch? When publisher goes down we will use the new server like publisher.Hi
Re: NTP... you can have multiple NTP servers assigned, and only the primary NTP server is used for license MAC generation. As such, I would:
1) set the primary NTP server to be the real NTP address you want to use. This will not be accessible when you build the server with the old servers' IP.
2) set the secondary NTP server to an accessible NTP server. I do this by setting up NTP on the server you serve the SFTP backup file from. I use Meinberg NTP if this is a Windows box, it's free.
That way you can build the server (primary NTP not accessible, but secondary is so it's fine). Then after the restore, change IP address and it will start using the primary NTP server.
I presume deployment type refers to product and role .e.g. a CUCM Publisher, not a CUC server or CUCMBE publisher.
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts... -
SQL Server Radio - A new podcast for SQL Server professionals
Hi everyone,
We (Guy Glantser and Matan Yungman) have recently launched a new podcast for SQL Server professionals, called "SQL Server Radio".
We release two shows a month, and basically talk about everything around SQL Server and the SQL Server community. On one show of each month, we juggle around and talk about interesting blog posts, forum discussions, news, events and other things that happen
in the SQL Server world. We expand about each of those items and add from our own experience. On the second show of the month, we go more in-depth. Sometimes we bring a guest, and sometimes we talk about a specific topic like SQL Server 2014, conferences or
professional development.
So if you love SQL Server and love learning by hearing, whether you're on your way to work, jogging or just chilling and
want to learn in a fun way, check us out on
http://www.SQLServerRadio.com
Two shows are already online..Hi everyone,
We (Guy Glantser and Matan Yungman) have recently launched a new podcast for SQL Server professionals, called "SQL Server Radio".
We release two shows a month, and basically talk about everything around SQL Server and the SQL Server community. On one show of each month, we juggle around and talk about interesting blog posts, forum discussions, news, events and other things that happen
in the SQL Server world. We expand about each of those items and add from our own experience. On the second show of the month, we go more in-depth. Sometimes we bring a guest, and sometimes we talk about a specific topic like SQL Server 2014, conferences or
professional development.
So if you love SQL Server and love learning by hearing, whether you're on your way to work, jogging or just chilling and
want to learn in a fun way, check us out on http://www.SQLServerRadio.com
Two shows are already online.. -
Hello All,
As mentioned in title, i am stuck up with that articular error from last three days,
i have following scenario, my SQL server 2008, my oracle 10g are on both same machine with OS Windows Server 2008.
the following error generated on my management studio when i execute my procedure written in my SQL server. Following is original source code snippet after error massage.
OLE DB provider "OraOLEDB.Oracle" for linked server "ORCL" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
Msg 50000, Level 16, State 2, Procedure PROC_MIGRATE_MST_FRM_ORA_SQLSERVER, Line 43
The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORCL" was unable to begin a distributed transaction.
BEGIN TRY
-- MIGRATION OF PR_COMPANY_MH START
BEGIN TRANSACTION T1
PRINT 'mILAN NNNNNNNNN 11'
INSERT INTO PROD.PR_COMPANY_MH
SELECT * FROM OPENQUERY(ORCL, 'SELECT * FROM PR_COMPANY_MH WHERE SQL_FLG = ''N'' ')
PRINT 'mILAN NNNNNNNNN 12'
UPDATE OPENQUERY(ORCL, 'SELECT SQL_FLG FROM PR_COMPANY_MH WHERE SQL_FLG = ''N''')
SET SQL_FLG = 'Y'
--EXECUTE ('UPDATE PROD.PR_COMPANY_MH SET SQL_FLG = ''Y'' ') AT [ORCL]
PRINT 'mILAN NNNNNNNNN 13'
COMMIT TRANSACTION T1
-- MIGRATION OF PR_COMPANY_MH END
END TRY
BEGIN CATCH
PRINT 'mILAN NNNNNNNNN 14'
ROLLBACK TRANSACTION T1
PRINT 'mILAN NNNNNNNNN 15'
SELECT
@ErrorNumber = ERROR_NUMBER(),
@ErrorSeverity = ERROR_SEVERITY(),
@ErrorState = ERROR_STATE(),
@ErrorLine = ERROR_LINE(),
@ErrorProcedure = ISNULL(ERROR_PROCEDURE(), '-');
PRINT 'mILAN NNNNNNNNN 16'
SELECT @ErrorMessage = ERROR_MESSAGE();
RAISERROR (@ErrorMessage, @ErrorSeverity, @ErrorState, @ErrorNumber, @ErrorProcedure)
PRINT 'mILAN NNNNNNNNN 17'
END CATCH
this perticular part is raising that error, and i had tried every configuartion on my local machine related to MS DTC.
When i remove my transaction code, its work just fine no exception raise, but when i use then i.e. BEGIN TRAN, COMMITE TRAN, AND ROLLBACK TRAN. its giving me error, other wise its fine.
Please Help or disscus or suggest why my transaction base code is not woking????
thanks in advance.
Regards,
MilanSorry again, I am new on any kind of forum, so i am learning now, following is the error massage generated by SQL Server. and its not
an architecture problem, i had just included my complete architecture to be more informative while asking for the solution or suggestion. My real problem is T-SQL, i think and its related to Distributed queries raise in SQL Server in Oracle Link Server.
OLE DB provider "OraOLEDB.Oracle"
for linked server "ORCL" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
Msg 50000, Level 16, State 2, Procedure PROC_MIGRATE_MST_FRM_ORA_SQLSERVER,
Line 43
The operation could not be performed because OLE
DB provider "OraOLEDB.Oracle" for linked server "ORCL" was unable to begin a distributed transaction. -
Logical standby issue after adding a new user at production db server
Hello Experts,
I am facing a issue related to logical standby db server where after adding a new user at production db server logical standby has stopped sql apply. Can anybody give some idea to find out the root cause and give some tips to resolve the issue.
tried below .....
SELECT EVENT_TIME, STATUS, EVENT FROM DBA_LOGSTDBY_EVENTS
ORDER BY EVENT_TIMESTAMP, COMMIT_SCN, CURRENT_SCN;
got error
ORA-16227: DDL skipped due to missing object
ORA-01403: no data found
ORA-00942: table or view does not exist
OS : RHEL 4 (IBM P5)
DB : Oracle 10g (10.2.0.1)
AchyotPlease let me know if can skip the DDL at which it is failing.
ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Use EXECUTE DBMS_LOGSTDBY.SKIP
ALTER DATABASE START LOGICAL STANDBY APPLY;
Thanks,
Renu -
Do I need to create new group for standby redo log files?
I have 10 group of redo log files with 2 members for each group for my primary database , Do I need to create new group for standby redo log files for the standby database
Group# Members
==============
1 2
2 2
3 2
4 2
5 2
6 2
7 2
8 2
9 2
10 2
If So, The following statment is correct? or nto
ALTER DATABASE ADD STANDBY LOGFILE GROUP 1 ('D:\Databases\epprod\StandbyRedoLog\REDO01.LOG',D:\Databases\epprod\StandbyRedoLog\REDO01_1.LOG');
please correct me if am doin mistake
becuase when I issue the statment I getting error message sayin the group is already created.Thanks John
I just find the answer
Yes, it's recomeded to add new group , for instnace If I have 10 group from 1 to 10 then the standby shoudl be from 11 to 20
Thanks I found the answer. -
New command for radius-server source-ports
I am trying to find the new command fro radius-server source-ports 1645-1646 since it appears to be depricated. We use tacacs so we do not have the radius server specified but we do need to put in the ports. Can someone please tell me the new command for radius-server source-ports?
ThanksBoth of the links that Peter posted are interesting and helpful. I would like to take a slightly different approach in answering your question.
In every version of IOS there are certain commands that get inserted into running-config when a particular feature is activated. It looks like in your version the radius-server source-ports is one of those commands. I do not think it is anything that you should be concerned about.
And I do not believe that having the radius-server source-ports command would prevent TACACS from working. I believe that there is likely to be some fault in your configuration. If you would post the aaa parts of the config then maybe we could see what the problem is.
In my experience configuring aaa some of the common problems include not correctly identifying the TACACS server, not having exactly the same key configured on the Cisco device and the TACACS server, not having connectivity to the TACACS server (can the Cisco device ping the server, and can the server ping the device), or errors in the authentication or authorization prameters specified.
Post some information and we will see what we can do.
HTH
Rick -
Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview" at
http://aka.ms/xb9l0w
Thanks -
James McIlleceHi,
Thanks for your good sharing.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
We want to purchase new server for our server room
We want to purchase a new server for our server room please let me know how to get it directly from HP. we also want a backup server with that.
Please help us to find out the best option
With Best RegardsGreetings,
Welcome to the HP Forum.
Please provide the following information:
Customer / Your Region/Country
Products interest (prod. names)
If you can do that, I can send along the information to HP and seek the correct contacts for you.
Thanks!
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround to your Question!
Kind Regards,
Dragon-Fur -
New Support Link for Adobe Media Server
All
Please note the new Support link for Flash Media Server/Adobe Media Server
http://helpx.adobe.com/adobe-media-server.htmlDear sir or madam,
Here is Letswin Technology, which specializes in global servers, web hosting, VPS, VPNj. If anything I can do for you, pls contact us!
Have a nice day! -
Hi,
I have installed SQL Server 2012 Express edition (name of installation media: en_sql_server_2012_express_edition_with_advanced_services_x64.exe) from MSDN and I have installed the application on my pc with Windows 7 Exterprise.
Everything is working fine except when I am trying to create "New Database Diagram", where I recieve following error message:
TITLE: Microsoft SQL Server Management Studio
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft.VisualStudio.OLE.Interop)
BUTTONS:
OK
I have tried two times to reinstall SQL Server 2012 Express and I have installed Cumulative Update #3 for SQL Server 2012 and restarted the machine, but I have still the same problem with the same error message.
Installed the following fixes:
1) 2012_RTM_DAC_CU3_2723749_11_0_2332_x64
2) SQLServer2012_RTM_CU3_2723749_11_0_2332_x64
These files was installed successful.
How can I solve the problem?
BR
Jan NilssonHi Jan,
Have you installed Visual Studio in your machine?
The problem seems to be related to installing and uninstalling the VS 2011 RC0 program.
The workaround involves copying the files from another PC with SQL 2008 or 2012 from one machine to another. Just replace this folder:
C:\Program Files (x86)\Common Files\microsoft shared\MSDesigners8
See also the following for further details:
http://social.msdn.microsoft.com/Forums/en-GB/vstsdb/thread/d65c71f5-3887-4f2a-bbd3-e799a4ac6fdc
Best Regards,
Iric
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Cold Standby Server for Crystal Reports Server...
Hi there,
We have the confirmation from Hong Kong SAP that Crystal Reports Server 2008 does not come with any clustering feature as Business Objects Enterprise does. We are to set up a cold standby server for the production server for high availability. Below is our procedures to work it out:
1) we set up two machines for CRS 2008 with the same licence key and identical hardware; otherwise we clone the production machine to an identical hardware for a cold standby machine
2) we are using our Oracle instance (same instance for both the production and the standby one) for CRS 2008 repository; we bring the production sever offline and perform the standby server installation of CRS 2008 without resetting the repository Oracle database
3) we are to use a SAN LUN for storing the reports produced by CRS 2008
Once the production server does not work properly due to any hardware problem, we switch it off manually and turn on the standby machine and the Crystal Reports service should resume with no repository problem (all the settings) and no loss of printed reports. We would be grateful if you could confirm the feasibility of these procedures. Thanks a lot.
Regards,
Jason FUCorrect, CRS is for a single machine use only, that why it is not as expensive as the full BOE. Talk to Sales to upgrade.
-
How to configure new system landscape in portal server for bsp iview
Hi
can you tell me what are the necessary parameters (apart form default parameters that were there while creating new system landscape) for configuring a system landscape for using it in bsp iviews.
thanks & regards
AshutoshHello,
what you call system name has to be the system alias, and this alias has to be the same between DEV/QUAL/PROD environment.
Your portal application will look for data/BAPIs/etc... with this alias. Your portal application will know on which environment it has to retrieve data/BAPIs/etc... will be defined in each system object you have defined for each environment.
Fabien. -
Duplicate target database for standby failing with below error
Hello All, Need your assistance
We are creating a physical standby database (standalone) from 2 node RAC database, OS =RHEL5 and DB =11gR2
What we did: We took RMAN backup of primary DB along with archives and copied to standby server in same location. We have modified necessory prameters on primary as well as standby too.
The command we used :
RMAN>connect target sys/pwd@primary auxiliary sys/pwd@stdby
RMAN> run {
allocate auxiliary channel ch1 type disk;
duplicate target database for standby dorecover nofilenamecheck;
release channel ch1;
Note we tried : duplicate target database for standby as well as duplicate target database for standby nofilenamecheck methods too....But no luck..we are getting following error.
channel ch1: reading from backup piece /u01/BDB/BWFCCPRD_5fmpdvce_1_1
channel ch1: ORA-19870: error while restoring backup piece /u01/BDB/BWFCCPRD_5fmpdvce_1_1
ORA-19501: read error on file "/u01/BDB/BWFCCPRD_5fmpdvce_1_1", block number 121856 (block size=8192)
ORA-27072: File I/O error
Additional information: 4
Additional information: 121856
Additional information: 1036288
failover to previous backup
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/20/2011 09:16:11
RMAN-05501: aborting duplication of target database
RMAN-05556: not all datafiles have backups that can be recovered to SCN 41855007833
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
could you pease help to resolve this ....?
Note : Creating standby using RMAN 11g new feature : duplicate target database for standby from active database is not possible in our environment since the network bandwith is tooooo low, We have tried and not able to succeed because of n/w issue, So we are doing this alternate method...!!!
Looking for your valuable advises...
Thanks in Advance....Take the fresh backup and also check the space crunch. The below clink may help you
ORA-27072: File I/O error Additional information: 2
--neeraj
Edited by: Vishen on Oct 20, 2011 2:14 PM
Maybe you are looking for
-
Assignment of Component Configuration
Hi, As you see in the screenshot, the Comp.Conf /.../GRC_GRAC_ERM_OIF is assigned to Component FPM_OIF_COMPONENT: But I think this is the cause for some errors in my application. The standard looks like this: I want to set up the configuration to the
-
Prime Infrastructure vulnerable to ShellShock?
Hi, does anyone know if Prime Infrastructure version 1.2 is also affected? It is not in the list: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20140926-bash KR
-
i use firefox as my internet browser. when i go to itunes to download music it says i am not connected to the internet when actualy i am. what am i doing wrong?
-
Manage your childREN! and get some GINKO
as parents you have to have a good way to manage children.. I found one... I came across it when a guy offered to help me out with learning/playing with some flex.. first he had an issue with filling up arrays with data.. and making coppies and housi
-
Hello , I created a planned order and when i look at MD04 transaction for the material i can see the planned order but there is an exception 52 indicating No BOM selected , what can be the reason for this exception. I have created a bom , routin