New Quad-G5 with Apple 30" display WON'T DISPLAY THE COLOR BLACK???!!!!

Just got this system up and running with all my software and for some reason if I show video with an all black screen there are blue lines tarnishing the image. If I let the computer go to sleep and then wake it up any black is afflicted with the same problem. Now if just the display goes to sleep (not the computer) and it gets woken up then the problem just occurs in video again. HELP! This computer should be able to display the color black.

Sounds like a video card issue.

Similar Messages

  • Problem with Apple TV, it won't finish the start up

    This morning my Apple TV refused to work.
    I would get the starting up Apple on my screen, it would ask me for what language to use, and then I could restart, run diagnostics or restore. I did all 3 options at different times, I never get past that screen. Diagnostics were all good though.
    I had a 250GB HD in it and reverted back to the original 40GB thinking it could be the HD. Same thing happened.
    This was a "refurbished" unit from e-Bay, I'm starting to wonder if it was really refurbished... But it did perform pretty well since I got it 4 months ago...
    Anybody have a clue what's happening?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • My old Mac died.  I bought a new MacBookAir.  Now I can't open my PSD's, JPEG's, that I designed in an ancient version of CS.  The 'old Mac' was running Tiger, the new MacBookAir operates with Lion.  Lion won't recognize the PowerPC apps.  What do I do?

    So...can I have Tiger and Lion running on the same MacBookAir?

    No.  You'll need to upgrade Adobe CS. If you don't really need the professional features you might find the Photoshop Elements fits the bill.

  • I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.

    I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.
    OS X 10.10.1. 
    Safari Version 8.0 (10600.1.25.1)
    WiFi router connects with mail but not Safari

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Try on another computer to help determine if computer or iPod problem

  • Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Welcome to the Apple Support Communities
    AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
    You have two possibilities:
    1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
    2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
    Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

  • How to contact with Apple support in Viet Nam? The phone number 1-201-2088 is unavailbe.

    How to contact with Apple support in Viet Nam? The phone number 1-201-2088 is unavailbe.

    Dial 1-201-0288, then
    dial 800-708-5413

  • Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings!

    Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings! Anyone else have this issue?

    I think its meant to show your name, not your ID.

  • I have an iPad 1 and would like to buy the new iPad. Will Apple exchange my old iPad for the new one . I live in Saudi Arabia.

    I have an iPad 1 and would like to buy the new iPad. Will Apple exchange my old iPad for the new one . I live in Saudi Arabia.

    Apple does not take trade-ins. You'll have to look for a dealer that does, though you'll probably get more for the iPad 1 if you sell it yourself.
    Regards.

  • My home movie DVD folders all have red circle with white dash and won't allow the files to be read. Is there any way around this so I can back up the DVD's on a external HD?

    My home movie DVD folders all have red circle with white dash and won't allow the files to be read. Is there any way around this so I can back up the DVD's on a external HD?

    Drag the folders to the external drive, and if prompted, click Authenticate. You'll probably be asked for an administrator password.
    (116608)

  • Why does the color red change from working with images in develop to library?  The color gets lighter and nothing shows a change on histogram but visually you can see it.

    Why does the color red change from working with images in develop to library?  The color gets lighter and nothing shows a change on histogram but visually you can see it.

    That's probably a broken display profile. The conversion from Library's Adobe RGB is different than the conversion from Develop's linear ProPhoto, so if there's a problem with the display profile it can show up this way.
    Recalibrate, or if you don't have a calibrator use sRGB. If your monitor is a wide gamut model use Adobe RGB.
    Assuming Windows, change it in Control Panel > Color Management > Devices, and relaunch Lightroom so that it can pick up the new profile at startup:

  • HT1338 my screen won't hold the color I chose

    My screen won't hold the color I chose, keeps turning yellow

    Are you using any other settings? Are you overclocking at all?
    CD/DVD is a generic term used for all DVD drives, so it should automatically detect your installed DVD drive and use that to boot if it's set up as the boot deviI
    I put it back to default. No overclocking. I agree about the CD/DVD is a generic term but the motherboard disagrees with you. Also when I "save change and reboot and go to Change setting info my DVD is disabled and is not set to first boot and there is no place to change it. The boot disk I'm using works fine on other computers and I also tried another DVD drive but the BIOS just isn't letting me boot to my DVD?

  • The display has lines and the color is strange.

    The Retina display has lines and the color is very light when I turn on iPad mini. When I woke up and turned it on this morning, it happened. I have no idea what happened since the iPad mini has been gotten no physical damage.

    Hi:
    I would try a hard reset of the notebook.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01684768&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us​...
    If that doesn't work and considering all of the other steps you took to remedy the issue, I would say the BIOS update wrecked something permanently.

  • Opening a legacy file in CC2014, the fonts in the file (which are loaded and accessible with Suitcase Fusion 6), won't display. I get the [Jensen text] font name indicating a missing font file. YET, when I make a new file, the fonts are available. Any ide

    Okay, that was a long title. Sorry about that.
    Longer version now. The font Janson Text is an old Type 1 Postscript font. If I make a new document in InDesign CC2014, this font is completely available to me. HOWEVER, if I open a legacy file that uses this same font, it shows up with the usual pink highlighting.
    I know the font is available to InDesign, because I made a new test document and set type with it.
    If I try using the Type > Find Font.. option to replace the 'missing' typefaces, InDesign won't let me, not recognizing the font that I just used in the new test document.
    I just tried exporting the defective file as an IDML file, then opening the IDML file. The font is now working properly.
    This is a real problem, as the file I'm trying to open is a book that we need to reprint. I now have to go through it page by page to see if any linebreaks have changed.
    WHAT CAUSES THIS, please?

    There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

  • I updated the photos that share with Apple TV but old photos display during music

    I updated the photo file that shares with Apple TV, and they display correctly when I play the slide show, but when they play slideshow with music playing it's the old photo file. How do I get the new photos to display during music? Thanks

    Not sure what you are trying to do, but the photo is just cached.  You might try restarting ATV and see if that will foruce a cache relaod.
    What is it you did?  Did you update an image, cover art, photo stream?  It could also be that what ever you updated it not what is being displayed.  For instacne if you updated something in iPhoto, but are pointing to Photostream that will not have an effect.  Same problme if you are looking at cover art while the music is playing.

  • I've had to change my email address so I registered the new one with apple, but how do I transfer the credit on my old account?

    I registered my itunes account under my email address but when I changed it I cant seem to transfer my apps across or credit. To make matters worse my new computer states there is a new iphone update out and to install it will erase all apps and music.
    There must be a way to transfer my apps and credit to my new apple account surely?

    1. Sign out of old ID
    2. Sign in with new ID
    Settings>AppStore>Apple ID

Maybe you are looking for

  • Minus and - not working in query

    Hi all, I am operating on 10G R/2. I have thsi query where thi sstatement <pre>(COUNT(W_O) - COUNT(W_I))</pre> TOTAL is returning 0.Why is the minus and '-' not working out in this query?. <Pre> SELECT TRUNC(DT) week_start , next_day (TRUNC( DT) - 7,

  • Multi day events in Month View.

    Multi day events in month view only display on the first day. Checking all day event fixes this, but none of my multi day events are in fact all day. If I sync with my iphone, it does mark both days on the multi day event in month view. In week view

  • File associations (always open with...) are constantly reverted

    Hi, This sounds like a minor problem but is a major hassle on every workstation. We want to change file associations for all types like opening all .eps with illustrator instead of Preview.app and many others. Our Workstations run Lion 10.7.1 and hav

  • Setting text to overflow into another text component in flex

    This was pretty easy when I've done it in html but I can't find any info on how to incorporate this into flex. I want to get this sort of thing into my app where once the text reaches the bottom it wraps underneath the bottom of the left hand image t

  • Modification of va01

    hi; I was requested to create a Z table for shift which I did. I have also created a new screen that pops up when you press enter after the second screen of the transaction. but when my screen pops up it freeses everything. I cannot stop the transact