New Revision of the eMAC

Is Apple going to release a new revision of the eMAC with the Intel chip to the general public or a smaller & cheaper 17" iMAC ? I really like the compact design of both eMAC & its bigger brother iMAC, but do not the price of the bigger iMAC.

Hello Mikeyeddie,
You may want to spend some time looking at the terms and conditions of using these forums / discussions.
Speculation about future Apple products... Forbidden!
Duplicate posts....
http://discussions.apple.com/message.jspa?messageID=1808880#1808880
Frowned upon!
You are very new here. I hope you do get a Mac soon.
I don't want to see you get into trouble though!
Best regards.
Ian

Similar Messages

New revision of the X200 ultrabase?

Any chance anyone knows if there will be a new X200 Ultrabase in the near future? I need one pretty much exclusively to do dual monitor output.
I am debating getting one, but would like to know if I should wait. Thanks.

france wrote:
Any chance anyone knows if there will be a new X200 Ultrabase in the near future?
In my opinion, based on what IBM and Lenovo have done with docking stations and media slices (aka Ultrabases) in the past, it's fairly unlikely that there will be any change in X200 Ultrabase in the near future.
Cheers,
Bill
I don't work for Lenovo

Bigbang XPower X58 New revision??

Is this a new revision? the first thing i noticed is the ream slots clip
the msi xpower we knew..
the msi i had..
Is this a new revision? the first thing i noticed is the ream slots clip

Quote
How do you tell from looking at the outside of the unopened box which revision might be inside --is their a date on the box which might be an indicator?? thanks m
Probably need to contact MSI manufacturing & find out the serial number range. Even then, in the manufacturing process, the two types may have been used until the supply was exhausted. I have one of each type, & although a little more caution & attention to detail is required when installing the RAM with the single clip version, once properly seated, everything works just fine. Might ask the retailer to open the box & check on it for you if it's that much of a concern.

New Rev from the K8N Diamond?

Hello
I have heard that MSI will bring out a new Revision from the MSI K8N Diamond?It has 2V Vcore and 3,8V Vdimm?!It is true?

Quote from: aicjofs on 25-November-05, 00:25:05
Stick, you know better then to trust the MSI site. LOL.
lol. silly me
anyway, seeing that there are 2 different names for the same mobo (K8N NEO4 PLATINUM/SLI & K8N SLI PLATINUM) I think it's also a matter of different geographical areas. best think is to look at the specifications at your retailer and you will be sure on what are you getting. if you will not purchase online and can see the mobo before, it is very easy to look on the SLi Platinum board for the second LAN connector. if it's not there it means that you don't have the Marvell chip nor the Sil3132 chip onboard. (PS - you can also count the SATA ports )
with no intension to bash MSI on this one, but it seems very stupid to make 2 boards that where supposed to be the same with different features. at least put a different letter at the end geeeeezzzzzz

The new revision 8.1

SSo, with the new revision of iOS 8.1 that was put out to day. Is anyone having more problems with their iPads? Should I download the forum?

I'm running an iPad 4, too and with no problems. Now, what that means for "you" is that it's technically feasible for iOS 8.1 to run fine on an iPad 4. If it wasn't okay, then it would not be running on any of them. Therefore, you'll just have to keep going down the troubleshooting trail. And I noticed that you said you had been through several processes before ... but there is one process that I'm not sure you have done yet. Have you reset your iPad 4 to factory default through your iTunes program and NOT restored your backup? In other words, left your iPad 4 in the same state it was in, before you ever added any of your data or any of your apps?
That's a troubleshooting methodology in which you'll see if that iPad 4 runs as its supposed to "right off the factory floor" so to speak, and before you ever start using it for your own stuff. I would verify that iPad 4 in that condition first, before going any further with it.
Here are the links I've put up for doing that (including doing your backups).
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

I miss the emac...

I need a new computer for artwork. Something I can AFFORD! So I've been planning on getting an emac! So I come here one day and see that they took the emac off the flippin store. That's so nice sarcasm!
Can you PLEASE BRING IT BACK!? The same thing happened with the iMac G4 which I had my eyes on for literally YEARS. I wanted the old one. I wish they'd stop getting rid of all the cool models.
They did the same with the colors. They should have kept the colors. Different colors made them more personal. Now everything is so plane and boring. Yes flat screens are nice, but come on! The neat model of computers made me more interested in them when I was a kid (and still do). They were eye catching. And a plus is they work better than any others. They don't even need colors. Bring on the shiny white + clear plastic! Makes them look all crystaly. Maybe make a line of models for women - we love the selections of colors.
What I wouldn't do for a clear ruby ibook G4 and emac... with pretty back-light keyboards. Think about it! How awesome would the ibook g4 look with translucent black interior, clear white keys that light up, and your selection of a clear colored plastic exterior?
Dependable and personal. It's a good thing.
-Mel P.
ibook g4 Mac OS X (10.3.9)

Then look at PowerMax, as Jean suggested. Here is a deal:
Apple Certified Reconditioned eMac G4/1.42 GHz with AppleCare -- US$829
In the Box
- eMac
- Apple Keyboard
- Apple Mouse
- Modem cable
- Power cord
- Install/restore DVDs/CDs
- Printed and electronic documentation
Mac OS X v10.4 Tiger
Tiger delivers 200+ new features and improvements, such as the amazing Spotlight search technology and handy Dashboard widgets. Tiger also includes all-new versions of the following system applications:
- Safari 2
- Mail 2
- Address Book 4
- iChat AV 3
- iCal 2
- Font Book 2
- DVD Player 4.5
- Preview 3
- Xcode 2
More Software
In addition, the eMac comes with an incredible bundle of software:
- iLife '05, which includes the latest versions of iTunes, iPhoto, iMovie HD, iDVD and GarageBand
- AppleWorks
- Quicken 2005 for Macintosh
- 2005 World Book Multimedia Reference Suite
- Nanosaur 2
- Marble Blast Gold
- Microsoft Office 2004 for Mac Test Drive
AND they will give you up to $40 off shipping (by rebate)!

[svn] 1011: Change for supporting newer version of the concurrent library.

Revision: 1011
Author: [email protected]
Date: 2008-03-28 16:42:52 -0700 (Fri, 28 Mar 2008)
Log Message:
Change for supporting newer version of the concurrent library. When you remove, you need to
provide the return value from the schedule method, not the arg you passed in. The api is
a litte awkward in this regard in that the return value is not a Runnable but the remove
method expects a Runnable so this code is a little defensive to be sure no one is using
a version of the code where the return value is not a runnable.
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/util/TimeoutManager.java

...It was so bad my English?

Ideas for migrating data to new iMac from faulty eMac?

My wife's old eMac died, but she was able to copy her user folder (all 58+ GBs) to an external drive prior to it finally giving up the ghost. It was copied via finder (not cloned or done via Time Machine), so it doesn't appear to have permissions set (i.e., I can mount the disk on another computer and access all her files).
She needed her new iMac set up right away to finish some work, so only a few files have been transfered.
I don't know if Migration Assistant can deal with the files, but I'd rather not migrate her stuff at this point. Migration Assistant isn't particularly granular (i.e., you can't choose which apps or which email to transfer - it's all or nothing). I'd rather access her home folder (as the user) to clean out her files (i.e., email, downloads, iTunes, iPhoto, etc.) prior to migrating them to her new computer. At a minimum, I want to log into her old account to backup her contacts to transfer over (or access them some other way).
Can I set up a user account for her on another computer (same name and pw), go into the advanced accounts settings and point to her folder on the external drive, and then log into her account? Or do I need to do some terminal work?
I believe the HDD was corrupted by the HW failure, but if Target Disk Mode is preferable for what I want to do, then it might be worth some troubleshooting on the eMac to get Target Disk working.

"Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist"
excepted from, "kimaccdual: A Basic Guide for Migrating to Intel-Macs" by Kappy and others.

New revision for a metadata only content

Hi all,
I'm using Webcenter Content (UCM) 11.1.1.6 and client is using a kind of documents without file associated. It's working fine with the AllowPrimaryMetaFile=true and createPrimaryMetaFile=1 variables, but client needs to have revisions of this content. We can't just update the content because they want to have a new revision for every change.
The checkout option is enabled but, when we try to create the new version, the metadata-only checkbox is missing and form asks for primary file.
Could you help me?
Thanks in advance.

I was able to replicate your issue. If I am right, the caveat is not in the fact that CHECKIN_SEL_FORM does not understand the rule, but rather that no rule is used at all (it defaults to the standard check-in).
What have I done?
- I have created a simple rule where all the three keys were filled with values as advised.
- The rule contained just the mandatory fields (security group, document type document title).
- Then, I have created a profile consisting of this rule only (defined as Excluded non-rule fields). Note that in my system Profile Trigger Field uses a custom field called xProfile, which contains values from a table, so I had to add another record to that table ("HidePrimary").
- Now, with this setup, if you check in a new item using the profile, the Primary File is hidden, but when you check out the item and try to check in a new revision (CHECKIN_SEL_FORM) it appears - no profile, but standard check in form is used.
- Therefore, I have modified the rule to contain also xProfile field (InfoOnly) and I filled it with the default value "HidePrimary". This will force the system to use the HidePrimary profile even when a new revision is being checked in.
- Finally, I verified that it really works.

What is the best method for saving the client sequence file revision in the database \ report?

I'm trying to figure out the best way to store the sequence file Revision in the database. That is, if I have the Revision (SequenceFile.AsPropertyObjectFile.Version), where (e.g. what table / field) should I put it if I'm using the SQL Server schema that ships with TestStand? How do I get it there?
Certified LabVIEW Architect
Wait for Flag / Set Flag
Separate Views from Implementation for Strict Type Defs
Solved!
Go to Solution.

Ok LabBEAN,
Here is my tutorial. It is actually easier than I thought:
Step 1: Configure>>Database Options and uncheck the Disable Database Logging.
Step 2: Click the Data Link tab
Step 3: Make sure the Connection String Expression is pointing to the right location. Should be a public directory with a .mdb file if you are using TestStand defaults. Click the View Data button to verify. It should open the Database Viewer so you can look at the tables. Leave the Database Viewer open.
Step 4: Click the Schemas tab
Step 5: With the Generic Recordset (NI) selected click the Duplicate button.
Step 6: You should now see a copy of that schema. In the Name box name it MyRecordset and make sure it is checked
Step 7: Click the Statements tab and highlight STEP_SEQCALL. NOTE: you must always do this before clicking on the Columns/Parameters tab
Step 8: Click the Columns/Parameters tab
Step 9: Highlight the SEQUENCE_FILE_PATH item and click the Copy Button
Step 10: Highlight the new entry and change the Name to SEQUENCE_FILE_VERSION
Step 11: MOST CRITICAL STEP: Change the Expression to RunState.Engine.GetSequenceFileEx(Logging.StepResult.TS.SequenceCall.SequenceFile, 107, ConflictHandler_Error).AsPropertyObjectFile.Version It is better to do it this way because you never now where a sequence file call will be made and not all sequence calls are made to the model client sequence.
Step 12: Hopefully you left the Database Viewer open from Step 3. Go to it.
Step 13: Right click the STEP_SEQCALL and select Add Column.. Name the new column: SEQUENCE_FILE_VERSION. Basically you need a column that matches the one you created back in the Columns/Parameters tab. Set it up with the same type and size. NOTE: there is an alternate way to do this using the Execute SQL View in the Database Options but you need to create it. You can create it from the Schemas tab back in TS by clicking the Build .sql File.. button.
Step 14: Back in TestStand click OK to save and close the Database Options.
Now run your sequence and you will see the new data in your database.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Checkin New Revision without checkout/browse steps.

Hi,
Is possible to do a check-in new revision for a document without check-out (that involves browse for file to upload) ? This is needed to just update some metadata fields and start a workflow process that is fired when one of the fields change from yes to no.
I already tried to use the service UPDATE_METADATA and UPDATE_DOCINFO but the workflow did not fire.
Any helps is appreciated.
Thanks,
Andres

Hi AEstrada,
nope, UCM will not trigger a workflow at all unless a new rev is checked in.
There are a number of customization approaches to do this "invisibly" though.
We at Fishbowl Solutions have created our workflow solution set which can help in this area.
On the update of a metadata field we can automatically and invisibly rev the content item so that it drops into workflow just like a normal document.
Please reach out directly if you would like more information.
Warmly,
Billy Cripe
Fishbowl Solutions

Is OS X 10.4 Tiger Full install CD Mac New X code the right thing for me?

Please Help - I have been having problems on some websites and with Safari - I can't afford to buy a new or even a 'new' used Mac with Intel - I have been thinking that upgrading to Tiger will solve my problems, I have committed to buy (on Ebay) but not yet paid for OS X 10.4 and am now worried that I am buying the wrong thing.
The description of what I am buying is Apple eMac OSX 10.4 Tiger Full install CD Mac New XCODE
Rare genuine factory Mac operating system, full installation CD set for Apple OS 10.4 Tiger. Normally Tiger OS 10.4 comes in single DVD format which most older eMacs don't have, so this OSX 10.4 is a rare item in CD format. 16 install CD's plus an XCODE Development tools version 2 on 17 discs.
My eMac specifications are:
Machine Model: eMac
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 512 KB
Memory: 768 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.2f1
Can anyone please help a damsel (albeit not a very young one) in distress?

No, its only 10 pm at the moment.
OK, that's good news as it is the latter type eMac, though not identical to the latest, it falls into the 'second half' of the eMac series.
The only difference I can see is that your model has a slightly slower graphics card but is the same model card. It seems only a subtle difference.
I believe there is a high probability that those disks would work.
Given they are considerably cheaper £27 or less it is probably worth risking. I'll guess 85% + chance of success.
The retail Tiger disks are just black, but they are quite rare, and overpriced.
Here is a comparison at
http://fastmac.com/osx.php
where they want over £50 (US79.95) so the ebay thing looks good.
You could change web browsers to Opera or Camino but Java versions end at 1.4 in Panther.
10.3 is pretty ancient in internet years, so an OS upgrade will at least keep you with a useful tool, even if not at the cutting edge.
10.20pm see you tomorrow.
Message was edited by: roam

When using Numbers with iCloud, a new version of the spreadsheet is created even when no reisions have been made. Why is this, and how do I make it stop?

When using Numbers with iCloud, a new version is created every time I make a change. I do not want all these revised documents. When I change a document, I commit to that change. How do I shut off this multiple-revision feature of Numbers being pushed to iCloud.
Also....
When using Numbers with iCloud, a new version of the spreadsheet is created even when no revisions have been made. Why is this, and how do I make it stop?
My files are growing.

Your plugins list shows outdated plugin(s) with known security and stability risks.
# Java Plug-in 1.5.0_11 for Netscape Navigator (DLL Helper)
# Adobe Shockwave for Director Netscape plug-in, version 11.0
Update the [[Java]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
See
http://java.sun.com/javase/downloads/index.jsp#jdk (you need JRE)
http://www.adobe.com/shockwave/welcome/

SOA composite - new revision x running instances on old revision

Hello,
We use OIM 11g R1.
I have a doubt about how to update a SOAcomposite (that has Human Task) with running instances on the old version.
I am trying to add notifications in the bpel process when the human task is approved or reject.
And will see how to add a treatment for the requirement of more information on the request.
According to the documentation I should disable the old revision, increase the revision, deploy the new one and register it.
My doubt is: how the running instances will be completed if the old version is disabled? Is there a requirement for all the running instances be completed before the update of the composite?
Thanks

Actually, I've managed to jump this hurdle. I did three things more or less simultaneously, so I can't say which did it.
First, I shaved my xorg.conf down to the most basic graphics stuff, i.e. a screen, a monitor, a device and switched the radeon for the VESA device driver. Second, I tried running startx as an ordinary user instead of as root. Finally, I ran startx (at first) without any configuration files, including .xinitrc. This got me a working X server with some xterms. I then proceeded to add bit and pieces gradually, starting with 'exec openbox-session' in .xinitrc.
Hope this helps.

How to install Leopard to external hard drive & boot the eMac from it.

I am attempting to update my mom's eMac so she can use her new iPad and have discovered it would be best to install Leopard onto an external firewire hard drive and boot from that. I want to be sure I'm doing it right. So, I attach the drive to the eMac, partition and format it (I did find some instructions in the forum) and then how do I load Leopard on the external drive. Would it be best to do all the formatting and installation from my own MacBook Pro? After Leopard is on the external drive, how do I cause the eMac to boot from it?
Or would it be easier to return the iPad, buy the basic Macbook and shine the eMac? Can you tell I'm frustrated?
Message was edited by: cwebb

how do I load Leopard on the external drive
Install it normally. The drive must be connected with FireWire.
Would it be best to do all the formatting and installation from my own MacBook Pro?
No. It won't work if you do.
how do I cause the eMac to boot from it?
Start up with the Option key held down, click on it, and push the button with the straight arrow.
(51916)

New Revision of the eMAC

Similar Messages

Maybe you are looking for