New Slide defaults to different master
Hello.
I've created a new theme having White Theme as base. I've deleted all the default master pages and I've created my own. I've also saved the theme to the Theme Choser under a different name.
Now, when I'm in the Slides Overview and select New Slide, it creates a new slide with a header and a body text box. In Side Layout pane, the page is named Title & Bullets.
How can I change this? I'd like it to default to one of my Master Pages.
Thanks
That will not be possible. Having imposed the PPT-work flow, you only can insert a slide based on a Master slide. I do not like that either, but I'm afraid there is no way back to the previous way.
Although you can always duplicate a slide (CTRL-D)...
Lilybiri
Similar Messages
-
Setting new slide default to High 24 bit quality ?
Captivate v5.5
I am adding some slides to an existing project that was originally created in v4.
I have now opened it in v5.5 and I am recording some new material to the project.
Currently I am adding slide by slide with images from our website - but each slide is appearing in the project with Quality setting "Low (8-Bit)" and all my other slides are Quality High 24 bit.
How can I ensure all new slides take the High 24 bit quality setting ? I have looked in preferences but cannt see anything.
NoelNoel, it's really quite simple:
If quality is all that matters, your end-user bandwidth is unlimited, and filesize / loading time is unimportant, by all means use the highest quality settings.
If on the other hand bandwidth is limited, and filesizes must be kept minimal to avoid excessive loading times, then use the lowest quality settings that still allow your content to look and sound acceptable.
In practice, working out these settings is always a compromise between quality and filesize. Since bandwidth for some users is almost always limited, download times for multimedia e-learning can be highly variable. You can often halve the filesize and thus double the download speed of an e-learning module just by sensible experimentation with the quality settings for video and audio.
It's just a matter of striking the right balance. -
I have always been curious which master slide is chosen when I insert a new slide within a slide show. The slide within your show that you have highlighted determines which Master Slide has a check mark beside it, but that is not always the one which is chosen as the new one.
Am I missing something?Ok, so I built a new master theme - same effect. The background colors and text formatting for the body of the table would not hold.
Then I placed a placeholder object into the master slide for the table, did all my formatting, applied it and voila - it carried over.
Seems that the palceholder did the trick for me.
Thanks for your support, brian
/Dirk -
How can I create a new slide that starts where a complex animation on the previous slide ends?
I am creating a series of animations to illustrate a complex set of ideas, and I want to do it as a series of animations, to keep each slide from getting too complex. I would like to do this a stages, by creating a new slide that is a copy of where the previous slide ended. I'm hoping that some of you have done more with Keynote animations than I, and that you'll be able to give me a few suggestions. Thanks!!
Thanks, Gary. I should have mentioned that the previous slide moved and scaled several groups of objects. So, at the end of the slide's activity the groups of objects were in different positions and were of different sizes than they are when I return to the slide. So if I copy the opbject sn paste them onto the next slide, I still need to get them to the right place, and scale them. That's tricky, especially since text objects don't scale like graphic objects. Thanks for trying tohelp, though. I apprecaite your effort!
-
Creation of new task in a different TR
Hi All,
I have a modification to be made to a User exit. When I'm trying to change to editable mode, a new task in the default TR (already associated with the user exit) is being created. but I want to create the new task in a different TR.
is there any possibility of changing the TR (charm already associated with the user exit) associated with the user exit to a new TR (new charm)?
Please help...
Thanks & Regards,
SriLalithaHi Sri Latha,
There is option to create the TR for same modification.If you are changing the same modification it will create one sub task under main TR.
SO you can change your modification and under old old TR only.Before going to release the TR,
You can create one empty TR include those modifications in new TR.
Thanks for understanding.
BR,
Veeru -
Business area default in asset master record
Dear all
Here is one ticket pertains to asset
when i create asset master record business area will be defaulted
the problem is when i upload asset master record through LSMW
by different business area the system throws a error message BUSINESS AREA EXISTS WHICH CANT BE REPLACED THROUGH LSMW
This is happening for all the asset classes
so i want to remove that default business area from where should i remove that which t-code or menu path
regards ravindra kumarDear ravinagh
removing of business area in asset master record is always possible but
see when u r uploading bulk asset master records through LSMW we cant replace the business area as it is already defaulted in asset master record
means some where we have assigned the default values to the asset classes or some other master record
so we have to find out the source of the defualt business area for asset master record
when we remove this from the asset classes then the business area will not be defaulted so that we can upload assets from LSMW with different business area
so please try to find out the source....................
regards
ravindra kumar -
How do i create a new event in a different time zone in iCal ios7?
New update seems to have made this disappear in iphone.
I'm also looking for same solution on MacBook Pro
THanks
jSeveral settings in Settings > Mail, Contacts, Calendars affect Calendar and your calendar accounts. These include:
Syncing of past events (future events are always synced)
Alert tone played for new meeting invitations
Default calendar for new events
Default time for alerts
Calendar time zone support, to show dates and times using a different time zone
Which day starts the week -
Automatically create new slide after pasting large block of text?
Hello,
Does anyone know if it is possible to have Keynote automatically create new slides if I paste text that doesn't fit into a single slide? The biggest time waster I've encountered is the apparent requirement to break up large chunks of text manually.
If Keynote does not do this, any ideas as to an Applescript or something that could help?
Much appreciatedI usually try dragging from the bottom up in Web pages, it can be tricky getting at the part you want without the extraneous formatting, since that is concealed from you and web designers use many different methods for layout.
That's why pasting into a plain text document is a good idea to shake off the web formatting, otherwise you are groping around whatever Pages has interpreted the formatting to mean. Even browsers don't get this all right.
If the original was formatted as a table which won't fit one of the cells on a Pages page, it just pops and won't continue because Pages does not allow breaks in mid cell. If the cells are small enough to fit and you have pasted the table inline in the main text body of a WP file (between the margins) it will flow.
Peter -
How to add new Attachment category in Projects master creation form
Hi Dudes,
I would like to know that how to add new Attachment category in Projects master creation form.
It defaults as Miscellaneous.
I created new category by navigated Application developer - attachment - category
but i dont know how to assign the above created category for Project master creation form
Can you pls throw some lights into this little dark room?See http://docs.oracle.com/cd/E18727_01/doc.121/e12897/T302934T458262.htm
Scrool down to the "Category Assignments Window".
This is where you assign an attachment category to your form/function.
See http://erpschools.com/articles/oracle-attachment-functionality-adding-an-attachment-to-a-form for step-by-step screenshots.
Sandeep Gandhi -
Automatically copy format to new slide
HI all,
I'm new with Keynote and I'm sure there is an easy answer to this, but I certainly can't seem to find it. I'm putting together a boring, bulleted presentation and have adjusted the master slide to the format I want. Changed font, size, bullet indentation, etc. However when I add a new slide, none of the format from the prior slide is copied to the new slide, it reverts to the original master slide format.
Is there any way to not have to redo the formating for each slide? I tried to save as a Theme, but that didn't seem to work.
Thanks for helping!
Steveduplicate a master slide and rename
make changes to the slide as required
save as a new theme
when creating a new presentation, from the tool bar; select the new custom theme, then select the new custom master slide -
I'm using Keynote, and I have a presentation that is over 100 slides all identical to the master slide. There are several placeholder text elements, and I have a database of all the text elements.
Is there any way to do a "merge" to create the slides automatically using the master slide template?Sure, you can build in and out as many text boxes as you like -- just add a new text box, put in the text, and set the build for it. Do be aware, however, that the timing you get will not be very precise.
If you specifically want to present song lyrics synched to audio, you might find that there are better alternatives than Keynote. Brian Peat, who contributes here regularly, has a comprehensive list of song presentation software. This list may have a better option for you. -
New slide vs. blank slide
In Captivate 5, what is the difference between choose Insert > New Slide or choosing Insert > Blank Slide?
Hi Mukul
Would it be fair to say a "stencil" is another term that would represent a slide associated with a Master Page?
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks -
Access model for smart tabs: Can the new tab have a different ACL?
Access model for smart tabs: Can the new tab have a different access control list then the sources it draws from?
Scenario: Some lecture content is in a private course viewable to course members only and some is put on a public page viewable to all. Can the content on the smart tab viewable to the public have different permissions?
Scenario: Public site starts with small number of courses, say 16, located in 4 sections on the main welcome tab. Administrators have edit only rights to the Welcome page and grant editing rights to each of the course pages to others. A few months later the site has more content and decides to change the four sections on the Welcome page to four section pages with courses attached to it. The new pages would have new editors for them. Can the course pages originally located on the main welcome page be restricted to no viewers and smart tabs put in new courses connected to the new section tabs? The thought here is to avoid rebuilding the site as the architecture changes.
All comments appreciated!
Bill Corrigan,
University of WashingtonThe Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
Font used when I give new Font("Default",....
Hi,
When I create a font using new Font("Default",..
which font will be actually used?
In jdk1.4 the created font shows family=sansserif and font=Default in string representation.
But in jdk1.4.2 the created font shows family=Default and font=Default in string representation.
Both these fonts have entirely different behaviours.
In my application "Default" font is used at many files and I don't want to change this in all places, when I port my appilcation to 1.4.2
Any body know, from where I can set the font to be taken for "Default".
I couldn't find any thing in font.properties.
Please help....
Regards,
Jojopublic Font(String name, int style, int size)Creates a new Font from the specified name, style and point size.
Parameters:
name - the font name. This can be a logical font name or a font face name. A logical name must be either: Dialog, DialogInput, Monospaced, Serif, or SansSerif. If name is null, the name of the new Font is set to the name "Default".
So, you're following none of the Font creation specifications, and just putting "Default" into name parameter directly. Not surprising it doesn't work as expected.
I'd say either replace all your "Default" font name parameters with a
null and let the Font() constructor properly setup it's own
"Default" font, or replace them all with the logical font name that
you actually want - "SanSerif" -
Recording new slides doesn't work
I am trying to add some additional slides to an existing .cp file. (Captivate 4) I select the option to insert recording slides. I choose to add the recorded slides after the currently selected slide, and I select the recording window. I set the mode to training simulation, and click the Record button. I can hear the little camera click as I go through the steps, occassionally adding a manual screen shot of my own. When I am finished, I press End, which returns me to Captivate.
In Captivate, I have one new slide at the end of the movie (not after the currently selected slide as requested) ... and no other new slides. If I try to record again, I get a message that I already have a recording session going on, and that I have to stop that session before I proceed. Of course, I have stopped that session, and have no way of stopping it again. I've got to exit Captivate to get out of this predicament.
I have tried copying all of these slides into a new movie, thinking there was something wrong in the movie. But the same thing happens in there.
I have tried recording in a different movie with the same dimensions and then importing them into this movie ... but the slides don't import.
I have invested too much time in the first part of this movie. I only had this one last section to record and it would be finished. I don't want to start all over again if I don't have to.
Do you think the movie is just corrupted in some way, or is this a problem that somebody has a fix for?
Thanks.
MargeHi Marge,
Yes, it does sound like your original movie may have become corrupted. I would suggest that you try copying slides from your original project to a blank project one by one. If one of the slides will not copy to the new project then you will know that your original project is indeed damaged.
However, since you are using Adobe Captivate 4, it might be worth seeing if you can record additional slides using the Captivate backup file. Begin by creating a copy of the. bak file, remove the .bak suffix and then try recording additional slides using this project file.
If this doesn't resolve the problem then you could try removing the .dat file from the following location.
C:\Documents and Settings\UserName\Application Data\Adobe\Adobe Captivate
Please note that if you are using Windows Vista then the path might be slightly different.
FWIW, I have seen instances when you try to record additional slides in Captivate 4 where you cannot - for some reason - select the application you want to capture screens from the Select Application of the Record Additional Slides dialog. To be fair I have managed to get around this by creating a new project file, capturing my screens and then importing these into my main project file.
If none of the above suggestions work, then re-install Captivate. Failing that please report this issue using the link I have included below.
Adobe Captivate Feature Request/Bug Report Form
Best - Mark
Visit the macrofireball blog
Maybe you are looking for
-
Error while creating Web Dynpro DC
Hi, I created a track with the wizard and I chose "Web Dynpro NetWeaver 7.0" as template. Now, when I create a Web Dynpro DC, I get the following error: Development Component Creation completed with some problem. Reason: Some used DCs are not availab
-
SR MBP Wakes immediately after being put to sleep
Background: I've recently been experiencing consistent random sleep failures with my Santa Rosa Macbook Pro. Whether I sleep via the apple menu, or close the lid, the MBP goes through its sleep procedure, then the split second that the MBP latch ligh
-
Execute Operation On Workitem screen appears...
I have a standard method KNA1-Create being used in a workflow. When executing this task from the UWL, the extra screen "Execute Operation on Workitem" appears. How can I remove this? I guess this is done in transaction SWFVISU, but I do not really kn
-
I need an assist please. While entering contact information I must have done something different on one of these contacts as it has the words "My Contact Card" under the name. This contact is at the top of my contact list and I can not find out a)
-
Adding Effects to text layers now causing image to "disappear."
Ever since the latest update to PS CS6, when I add a simple effect to a text layer, like emboss, the working image disappears when I zoom in and out. Also, the layer effect does nothing to the type. It's almost like a dispay issue. When I turn the la