New SSD

Hallo,
i got a New SSD from Lenovo, behause my Old One was broken.
The X230t is not able to boot from this SSD!? Is this Common, that no operating System is preconfigured?
I Wonder if I have to use the recovery CDs to install Windows on the New SSD, or if I have a Problem!?
thanx

Welcome to the forum!
You'll need to install the OS on the new drive using the recovery disk set. The replacement drives are usually shipped blank.
As long as you can "see" the drive in BIOS, you should be good to go.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across. However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro. I'm finding that it doesn't run as quickly as it used to.
A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library. Keep all documents, pictures, music etc on the current hard drive.
I would be grateful if someone could help me with:
1) installing OSX on the SSD without copying across data from the current hard drive
2) transferring applications, system and library folders across to the SSD so that they still function
3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
If anyone could help with this, it would be much appreciated.

If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
Clinton

ITunes Match won't recognize my MBA equipped with a new SSD

Hi,
Here's the situation: I replaced the SSD in my late 2010 MBA to add storage space. Everything went perfectly well and I have been using it for weeks, no problem whatsoever with any of my iCould stuff - calednar entries, contacts etc. as everything was transferred over by making a back-up of the old SSD onto the new one and re-instlaling Mavericks to the new one.
I also have been using iTunes Match for years and love it: ATV, IOS devices are all connected and work perfectly. Until I tried using iTunes Match on the MBA equipped with the new SSD. Note that my iTunes music (not the library file) sits in an external drive connected to my Home network which I don't currentl have access to. That's also teh reason why I signed up for Match: once synced, I didn't have to connect to tht drive and could travel while still having access to all my music.
The library only sees two local songs that were downloaded recenrly after I purchased them on the iTunes Store. I'm still using the same Apple ID nothing changed, but iTunes isn't showing any of my iTunes Match songs in there. I checked Match had been turned on (it is), I checked that I didn't max out on the number of devices (I haven't) and even checked availability of iTunes Match in other countries (temporarily in France), but otherwise residing in the US.
So now, when I try to "add this computer" to iTunes Match, it gives me the following error:
Only one library can be matched at a time. If you continue, the other iTunes Match session will be stopped and this computer's library will be matched instead.
=> Seeing that the "old" library and the "new" one technically come from the same Mac (only now it has a new SSD drive), I'm at a loss and scared to have all of my previously synced/matched songs deleted from itunes Match if I only sync the two local files that were just downloaded/purchased. <=
Would appreciate any help or suggestions please.
Thank you in advance!

wandererny wrote:
Only one library can be matched at a time. If you continue, the other iTunes Match session will be stopped and this computer's library will be matched instead.
Hi,
You often get this message when match thinks that you already have a match in progess on another computer.
If you are happy that all your music is on your new hard drive (or if it is only in the cloud), you should select "this computer".
Jim

I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.

Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts.

My mid-2009 MacBook Pro's hard drive is near death. I want to install a new SSD and work from scratch. Please help.

Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc."). It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead. Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive. If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
Potentially Important info:
     Model:                mid-2009 13'' MacBook Pro
     Processor:          2.53 GHz Intel Core 2 Duo
     Memory:             4 GB 1067 MHz DDR3
     Software:            OS X 10.8.4
Some additional questions I have...
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing. The batter was replaced in March, the RAM was upgraded to 8 GB in January. When the battery was swapped, the trackpad went           nuts so that's new too. Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).

cwgonzalez1192
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing.
Well there is no "official Apple HD / SSD" in any regard, no worries there.
If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
You can push it likely a few more years, for mere surfing and word processing,...many many years.   Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
Concerned with a boot clone? yes and no. Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course.    Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
CLONE Apps :
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/

All device mappings lost, including DVD, trying to install Windows 8.1 on a new SSD disk containing no OS

I have a catch-22 situation. When I installed a new SSD disk on my desktop (does not contain an OS), Windows 8.1 would not install. The error stated that there was no partition to install on. I saw a Forum describing initializing the drive with DISKPART
using the advanced tools and a command prompt I got through the windows 8.1 installation disk, which I did successfully.
I did what it described, created an active partition, an all my drive mappings were lost. Now I can't access the Windows installation disk because the mapping was lost on my DVD reader. The error says to press any key to boot from DVD, when I do this the
message just comes up again. It is clear my DVD is not spinning or being accessed. So, every solution I have read on these forums seems to depend on being able to read the DVD, which I cannot do. I have unplugged all hard drives but the new SSD and DVD
reader.
When I try to get a listing from the shell, my only option, it says nothing is mapped. My BIOS settings boot first from DVD, then from disk. It doesn't matter, the DVD cannot be accessed.
How do I map my DVD with no OS so the Windows installation disk can be accessed?

Hello LBLivnat,
With no operating system, the DVD recognization is not from Windows.
Please go to bios and check if the DVD rom is recognized in the BIOS.
Please contact the manufacturer and check if the issue is from the BIOS.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Wrong Drive Letter in Catalog after new SSD

Had a new SSD installed in windows 7 desktop. It is now the C drive and the old hard drive is F. All the photos are on C as is the catalog (per system information under Help) but the catalog shows the path for all photos to F drive. There are no photos on the F drive. I can open all the photos but cannot add new ones. New scanned photos go to C and elements automatically "finds" them but the new photos screen is just a "?" and Elements cannot bring them into the catalog. I have about 10,000 pictures. Any help wood be appreciated. Thanks

paulp27948648 a écrit:
Had a new SSD installed in windows 7 desktop. It is now the C drive and the old hard drive is F. All the photos are on C as is the catalog (per system information under Help) but the catalog shows the path for all photos to F drive. There are no photos on the F drive. I can open all the photos but cannot add new ones. New scanned photos go to C and elements automatically "finds" them but the new photos screen is just a "?" and Elements cannot bring them into the catalog. I have about 10,000 pictures. Any help wood be appreciated. Thanks
That's how the Organizer works. The drive is not only recognized by the letter, but also by the serial number of the drive. (The reason for that is that removable drives can change letter when plugged in depending on the other peripherals already plugged in). That's why one of the most repeated advice when changing drives or computers is to use the backup/restore method.
Use Backup, Restore to move catalog | Organizer | Elements 6 or later
What can you do now? I assume you don't have the full backup needed for that process.
You can 'reconnect' your files:
Photoshop Elements (PSE) knowledge base.
That's not easy and time consuming, generally.
Or you could copy your picture folders tree back to their original position on drive F (except the newly imported ones). That should reconnect everything.
Once reconnected, delete all those picture files on C.
You can either use the backup and restore method to recreate everything in your C: drive.
Or simply use the organizer to move those files back from F to C.
In the left folders panel, you can drag and drop your folder tree from F to C (be patient for that copy). The files moved from the Organizer won't be diconnected.

How to install Lion OSX on new SSD without install disc

TL;DR
I need a way to install Lion on a new SSD without an install disc, and how to format it without a Mac.
Hello, just yesterday I opened up my MBP 13" Mid-2010 running 10.7.(4/5) (Not sure which it is, but I think it is 10.7.5) and the first thing I saw was Skype tring to sign in. It looked fine, untill I took a second look and I heard a strange clicking noise coming from my computer. The Sykpe signin page said "Disc I/O error" or something like that. I instantly knew there was something wrong with my hard drive. Tried rebooting, grey screen, strange clicking noise like most people with hard drive failure. I was devistated. It has worked minutes ago, then my brother gets off, I open it up,and the hard drive has failed. After I got over the initial shock, I googled "hard drive replacement" after searching for a while, I noticed most sites just showed how to UPGRADE your hard drive, cloning it and all. Well, heres my main problem. I had no time to clone. Luckily, I had started backup up a month ago, and all my data is safe on my external hard drive, but this is only a time machine backup. No OS. Now, most people can just put in their install disk and voila! But, I, sadly, do not have my install disk. No idea where it went, I just don't have it. So, I was wondering if there was any possible way to make a bootable USB or disk without having acsess to a Mac, or having to buy a disc. I bought Lion, and I'm hoping that there is a way to download this and put it on a USB, then boot my computer from it. Now, my second problem is formatting. I have no idea how to format my SSD, let alone without a Mac. If there is some way to format an SSD so that it will work with a MacBook Pro, that would be great.on a PC
IMPORTANT: No, I don't have ANY install discs, the only one I had, for Snow Leopard, is gone. And no, I don't have access to ANY Macs to format the SSD. Finally, I would really love to be able to do this all cost-free, as I have already purchased the Lion, and dont feel like buying a disc for it again.

Yes. See below:
Drive Erase for Lion/Mountain Lion
1. Wait until the Main Menu appears. This could take quite some time because you are doing all of this over an Internet connection. You should use Ethernet if possible. It's much faster than wireless. Select Disk Utility from the Main Menu and click on the Continue button.
2. After DU loads select the SSD main entry (mfgr.'s ID and size.) Click on the Partition tab in DU's main window. Select One partition from the dropdown menu under Partition Scheme.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
After the above has completed quit DU and return to the Main Menu. Click on the Install/Reinstall OS X option then click on the Continue button.
You should be all set if there are no glitches.

Clean Install of Mavericks on new SSD - Final Question

I am looking for some help installing a new SSD into my mid-2010 Macbook Pro. I have the 15 inch with i5 and 4GB of RAM. last week I upgraded to 8GB of RAM, purchased from Crucial, and am about to install a MX100 512GB SSD also purchased from Crucial. I have read about the issues with third party drives in Yosemite and because of this I will keep Mavericks until I learn more.
My goal has been to get the new SSD into the computer and treat it like a brand new computer completely clean. This I learned was considered a "Clean InstalI". I am not very good with computers and sometimes the discussions I've read on the internet can generalize things and not define each step like a complete novice like me would need. So I have done a lot of research and below have a step by step guide on how I intend to do a clean install of the operating system onto my new SSD. I am looking for validation that this is correct or any steps I need to adjust.
I had asked a question about 2 months ago that lead me into the direction of doing the clean install. Drew helped out quite a bit and got me started on researching what I need to do for this clean install. There were some comments I had a question with. His notes are in italics and my questions are in bold.
During install use Setup Assistant (it's basically the same as Migration Assistant).
Connect the old HD (Can I connect to my external HD that backed up my old HD via Time Machine?) & choose the option to migrate the User account (leave the applications & other data disabled). (what happens if I opt to not do this step, not migrating User account information, what would be the Pros / Cons... another basic question I guess would be what exactly is in these User Accounts... anything that if I did not migrate over would give me issues?)
When completed you will have the same user on the new disk.
The Applications are left on the old disk, it's better to reinstall them in my opinion.
now on to by guide I compiled...
My Step by Step guide that if confirmed on here I will move forward with! Very excited and hope I got this correct.
Create bootable MAC OS X Mavericks USB Flash Drive
App Store - Download OS X Mavericks from PurchasesDone
Now found in the Applications folder (leave right there)
Plug in USB Flash drive (minimum 8gb)
Go to UtilitiesLaunch Disc Utility
Find USB Flash Drive on left hand side
Format this drive
Click on Erase (tab towards top)
Format: Mac OS Etended (Journaled)
Name: “installMavericks”
Click Erase button at bottom
Launch Terminal
Copy and paste text below. replace the red “Untitled” with the name of the USB drive (installMavericks) - case sensitive and keep the space after installMavericks
click enter - put in password
will take approx 20-30 minutes
If message says Done I now have a USB drive with Mac OS X Mavericks right on itwhat happens if there is an issue?
Text to put in terminal
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Upgrade HD to SSD
I have backed up my current HD on an external 1TB drive via Time MachineI plan to do a Fresh/Clean install of the Mac OS Mavericks. I will individually bring over songs, pictures, movies, documents etc from the external HD that has the last x amount of my Time Machine Backups of current/soon to be old HD
Open Macbook Case
loosen two screws, pull the entire strip out. The screws do not come out, only loosen
Pull hard drive out with the clear strip of (paper?)
careful, still connected to SATA cable
once removed - use TORX screw driver to remove the 4 screws on the Hard drive and transfer them into the same spot on the SSD
connect SSD to the SATA connector
put the SSD back into its bay by lining up the 4 screws to the locations within the bay
add back the strip that had the two screws from earlier. tighten screws
put case back on.
Plug in USB into computer and turn on computer
Will boot to the Mac OS Utilities
go to “Disc Utility”Find SSD on the left
go to Erase Tab to repartition
Format: Mac OS Extended (Journaled)
Name: example “new SSD”
click erase at the bottom
Exit out of Disc Utility
go to “Reinstall OS X”Click continue
go through the screens and menus… (not sure what happens here) assuming this is loading the OS Mavericks from the USB to new SSD
after this step is the installation complete?
what will be on the new SSD?
iTunes, iPhoto, iMovie, Garage Band, QuickTime player etcwill these need to be re-downloaded from the App store etc
Logic Pro X, Toontracks, Fluenz etc.these I need to re-download from the sites using serial keys etc. (I have decided to just buy the new Logic Pro X so that I can do the clean install and leave my old Logic Express behind where I have lost the disc that came with it)
From here I can connect my external 1TB drive that had my previous HD backed up on it and pick and choose what songs, movies, pictures, documents etc that I want to drag onto my new SSD
DONE !! ??
Sorry for the long post. Wouldn't make sense not to reach out to this awesome community though. Thanks again for all the help. I realize I am responding to an old post so I may end up re-posting this as a new topic.
Daniel

DRH85 wrote:
...However the simplicity of using Time Machine to migrate over to the new SSD is very alluring. I have found a link that talks about the Pros and Cons. Do you think they summarize things very well?...
Your link makes very interesting reading. One thing that jumps out is how an old HD's installation and Time Machine are equated. Time Machine is a remarkable system, simple on the outside and complex under the hood (this is the fundamental resource on the subject, created by a Community member who is sorely missed). But it doesn't play well with certain types of files (virtual machine files for running Windows, etc., on a Mac for example) and has, in my experience at least, lost some files after briefly saving them. Your old HD, on the other hand, is both complete and current, making it a better source IMHO to migrate from.
The point about older software no longer being compatible is well taken, but I tend to keep older versions long after newer versions appear and I've been surprised at how well they continue to function after the publisher insists they're no longer supported by a newer OS (and are sometimes better than what replaces them). And in the case of commercial software, associated files are often sprinkled far and wide, perhaps to prevent easy pirating. Moreover, while keeping track of serial numbers is always a good idea, many publishers limit the number of installations and entering the S/N over again usually involves the program phoning home to check on the installation count so far. Cloning avoids that more effectively than migrating.

I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working.

I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.

Tech support is not normally available on weekends. You should contact them as soon as the weekend passes and pick up where you left off with them.

How to move library only (not data) to new SSD

I currently have an iMac with a 2TB drive which contains my OS, application and all data (iTunes etc). However, I am about to install a 240GB SSD as an additional drive which I intend to use for the only for the OS and applications. I would like my iTunes library files to reside on the new SSD but to leave the data(music, video etc) on the existing 2TB drive and wonder what is the best way to achieve this.
Any help much appreciated.
Regards

The details of the answer will depend upon how you intend to have to drives set up. If you're not changing drive structure in any way, try copying the iTunes folder to the SSD but do not copy the media folder. On the SSD start iTunes with the option key held own and guide it to the new location of your library files. I believe (but cannot test this) it will still know to look for the files on the other drive. If it doesn't you will have to take additional steps.
Typically the easiest thing to do is not split library and media files. It gets messy when moving between drives and if all your media is on another drive there's not really much point in having the library files on the main drive with no media. You can just leave it all on the 2TB drive, then start iTunes with the option key held down and guide it to the library location on the external drive.

Macbook Pro, How to transfer files to new SSD

Hi
Ordered 16GB of Ram and a 480GB SSD for my MacBook Pro 13 2.5GHz last night.
I know how to install the ram and SSD but I am kind of stumped as to how to move my files from my HDD currently in my Mac to my new ssd, I know that its possible to do it by removing the optical drive and use a hard drive caddy and move the files with an app called super duper but i could do with keeping my optical drive for the time being.
I have a Mac Pro late 2012, i was wondering is there any way i can put both drives into two different slots and transfer the files any way?
Or does anybody else know how i can do it, maybe if i take my Mac to the apple store they have a cable they would let me use whilst im there?
Hope somebody can help
Tom

Buy an external hard drive enclosure. They are inexpensive. Put the new drive in it temporarily, connect it and run Disk Utility to format the new drive.
Then transfer files between the two drives with Super Duper or Carbon Copy Cloner.
Next physically switch the drives.
Your old drive can now serve as your Time Machine back up.
Example of a hard drive enclosure: http://www.newegg.ca/Product/Product.aspx?Item=N82E16817392032

I got a new SSD and I cannot put anything onto my iPhone 4S through the SSD, but I can on my old HDD. How can I fix this issue?

So recently I purchased a 250g SSD for my new build, while still keeping my old 1TB HDD. Whenver I try to use iTunes (the latest), I cannot transfer ANYTHING onto my iPhone 4S. There is no "Add to" button, nor can I drag and drop. However, I can do both on my old HDD. I also own an iPad 4, which I can easily use on both drives. This is quite annoying because I have to restart my computer just to add music or videos, etc. I do not want to sync because I will lose all of my music, or whatever else it takes, and I do not want that.
So how can I enable file transferring on my new SSD?

Move the ENTIRE iTunes folder from the old computer to the new computer, or drives in this case.
iDevices are designed to only sync to one library (computer). Attempts to sync with a new library will require removing all media from the device and replacing with media from the new library.

How do I transfer applications from AirPort Time Capsule to my new SSD?

Hi,
I wonder how to transfer my applications, Logic Studio etc, from the AirPort Time Capsule to my new SSD on the iMac. I can't do a complete restoration beacause the SSD is to small, only 255 GB. I have Mountain Lion.
Thomas

Migrate what you want ..
See http://pondini.org/TM/15.html
I recommend you read the whole section 14-17 to understand the various restore options in TM.

My late 2012 mac mini boots slow with new ssd drive

So here is the situation. I purchased a 128gb ssd drive, installed it a usb enclosure, formatted it to Mac OS Extended (Journaled), cloned it with carbon copy cloner 3, used the option key during boot up and selected the ssd drive and it booted my mac mini and it functioned perfectly. I than tested it for dozens of reboots and it worked fine. I then took apart my mac mini and removed the original hard drive and installed the new ssd drive. When I boot to the ssd drive it still takes 47 to 53 seconds just like the old drive. Aren't ssd drives supposed to be a lot faster?
My solution or tip is as follows; The reason it takes so long to boot is because the mac mini doesn't know you replaced the old drive and it is looking for it during the boot process. Finally it can't find the drive so it boots to the ssd drive. All you have to do to correct this is click on "system preferences", select and click on "startup disk" and select your ssd drive and click on "restart". After these steps your mac mini will now boot in about 17 seconds. Issues solved.

Yes, my solution fixed the issue. I went from a 47 to 53 second boot time to a 17 second boot time. The ssd drive is significantly faster than the original drive that came with my late 2012 mac-mini. This is my first post and I wasn't sure how to post this as a tip. I have another tip regarding usb 3.0 hubs.

Windows 8 will not activate with new SSD (second) hard drive

I added a new SSD drive in the second hard drive bay. I used the HP restoration media to install Windows 8 on the new SSD drive. Windows 8 will not activate. After spending 90 minutes on the phone with HP support (and paying $150), they told me to contact Microsoft. After spending some time with Microsoft, they told me that the Windows product key is being locked by HP, and there is nothing they can do.

Hi badgerbuzz,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

New SSD

Similar Messages

Maybe you are looking for