New tab in XD01 only when company code data button is selected

Hello all,
I added a new tab in XD01 with the help of BADIs CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS.
But the new tab is appearing at all levels i.e general as well as company code level.
But my client needs the new tab to be displayed only when the company code data button is selected.
How do I restrict this?
Any pointers to this would be highly appreciated.
Thanks in advance.
Regards,
Chandra.

Dear sriraj
If you found solution exactly  Make it correct answer but remember in this Post to which Answer you have given Correct answer so dont do like this
Because in future people easily trace there solution
Dear Mahesh .. Here my intention to guide him only not to blame any one
thanks a lot  

Similar Messages

  • Need to add a new field to XD01 under company code data tab

    Hi,
    I need to add a new field under Company code data of XD01 under Account Management tab.
    I came to know two BADI's CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS can be used for this. But for these BADIs we need to create a sub screen.But for my requirement I need not use a subscreen just to add a field.
    Please let me know how to do this?

    Hello Pavan,
    Do you have any solution for this issue? I only can creat a new tab but hi prefer as you, creat a field Company code data of XD01 under Account Management tab.
    I read that is not possible, this is true?
    Best Regards,
    Eduardo Paiva

  • No company code data available in XD01

    Hi All,
    I'm facing a issue in XD01 transaction code.
    In my current client process of creation of customer is first Master data team is responsible for creation of  General data segment of the customer once general segment is created it comes to SD user who is responsible for creation of company code and sale are segment. SD user donu2019t have authorization to create general segment u2013once general segment is created by MDM then only system will allow to create other segment by SD user.
    In production system when SD user use XD01 to create company  and sale area segment that user is not able to see Company code segment and user is calming that  earlier they are able to see company code segment.  I checked with S&A team as per them there is no changes in roles and authorization for that particular user since beginning.
    So to test what is the problem I requested S&A to create a test id in quality system with same role and authorization what SD user having in production system. I asked MDM to create a customer but when I (I mean test user created in Quality system )try to use XD01 to create other segment then system through a error saying u201CCustomer 830587 has already been created company code NLYQ sales area NLYQ SV PHu201D. Mean system is not allowing me to enter inside through XD01 because customer is already created but user is able to enter through XD01      in production. How it is possible Iu2019m using same roles and authorization what User having in production system.  if in production user is able to enter then with help of test id it should also allow to enter inside XD01 in quality also .
    I checked SU53 also even I asked S&A to activate tracing on Test id in quality so that we will find missing authorization during my testing in su53 and log we found nothing.
    So just wanted to know how it is possible or how I can get company code data in production system for that particular user.
    Thanks
    Prakash Sharma

    Dear Madhu ,
    Yes user is giving company code in selection parameter and there is BDC for creation of Customer. MDM is using that BDC for creation of general segment of customer
    Regards
    Prakash Sharma
    Edited by: Prakash Sharma on Jun 20, 2011 2:23 PM

  • Company Code Data in XD01

    Please help me to solve this issue as some time in when you create an account in xd01  some time i am not getting company code data and some time i am getting it please help me how to solve this issue.
    Message was edited by: G Lakshmipathi
    Please make use of the subject effectively and don't type the entire text in subject
    Moderator Remarks: All the points are unassigned and discussion is locked. Reason - Basic & encouraging point gaming.
    Message was edited by: Jyoti Prakash

    Dear sriraj
    If you found solution exactly  Make it correct answer but remember in this Post to which Answer you have given Correct answer so dont do like this
    Because in future people easily trace there solution
    Dear Mahesh .. Here my intention to guide him only not to blame any one
    thanks a lot  

  • After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Is third-party SO/PO  process possible using only one company code?

    Hi friend,
    1) my client wants to implement third-party PO process but also wants a way of keeping track of inventory during this process. I know that inventory should be tracked on the vendor side and not on our client side since we're doing third-party PO.
    However my client wants to track inventory (in an inventory g/l account like 120100) so that when my client post a Goods Receipt, the inventory account
    gets Debited and when client post  the outgoing invoice to customer, the inventory account gets Credited. In this way, my client can track
    if the customer have received the ordered item or not.
    The problem is that third-party PO posts to consumption account but DOES NOT post to inventory account. Is there any way of
    setting this up so that in addition to posting to comsumption account every time a Goods Receipt occurs?
    2) i tried to create "Individual Purchase Order" (customer order from client -> client order from
    vendor -> vendor ships item to client -> client then ships item to customer) so that posting will hit inventory account.
    However, i find that taking this approach involves setting up a Plant for vendor (A), a Plant for our Client (B), and a Plant for Customer (C).
    Because when i do a Goods Receipt, the stock has move from Plant A to Plant B. Then when i do a Goods Issue to the customer, it asks for the receiving plant. I assume this means that the stock moves from Plant B to Plant C.  
    Also, from the reading i did on the forum, i get the impression that i need to create more than one Company Code if i were to do
    third-party PO.  Do the Vendors have to be created in a different company code then the Customer? Or does it mean that Just the
    plant (like Plant A) needs to be created in a different Company Code then Plant B and Plant C?
    3) can i do third-party PO using only ONE company code?
    Can anyone provide some clarification on this issue? I've read tons of posting but none really helped clear  this issue up.
    Thanks so much.

    Dear Kishore,
    Individual PO processing is not third party process at all. In third party process the vendor delivers the goods dirctly to the customer - please check what SAP help says.
    http://help.sap.com/saphelp_46c/helpdata/en/dd/5601d4545a11d1a7020000e829fd11/content.htm
    Dear Queyen,
    One important point of third party process is that there's no need to keep stock of materials - that is in harmony with reality. Why does your customer want to keep stock from the goods if they doesn't receive at all? Is it coreect? It doesn't correspond to the fact.
    You can do statistical (ghost) GR against the third-party PO and you can see the goods movement in MB51 - I think this should be enough.
    http://help.sap.com/saphelp_46c/helpdata/en/dd/560287545a11d1a7020000e829fd11/frameset.htm
    BR
    Csaba

  • Can't open new tab by going to file/new tab (or CTRL+T or clicking on the new tab field). Only way is to right click on a link and choose open in new tab.

    Can't open new tab by going to file/new tab (or CTRL+T or clicking on the new tab field). Only way is to right click on a link and choose open in new tab.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.

    My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.

    What are the settings for clearing history when Firefox closes?
    Make sure that you do not clear the Browsing Cache as that will remove the thumbnails that are stored in it.

  • Need to move data only by company code wise to another client

    Hi All,
    I need to move data from DEV client to one of PRD clients.
    There are two scenarios:
    1. The scenario is we have 3 company codes in DEV but need to move data of only 1 company code (that too customizing data).
    2. We want to move data, date wise also (i mean from 1 JAN to till date).
    Is there any possibility in SAP to do this?
    Thanks
    Disha

    "As I said above, production system should not be build from quality/development system in any way either by client copy or ALE or any other means."
    @Sunny
    Not necessarilly correct in all cases. Purely depends on what data is being discussed here. ALso depends on how Business processes have been defined. In lot of projects master data like GL Accounts,Cost Centers,Profit Centers etc is created in Development and ALE'D to production. You can also move a lot of data via transports (cutomizing). Depends on what data is being discussed. Transaction data ..yes you would never do that . But customzing and master data you can; provided you have fool proof processes in place and have a good understanding of how ALE works for the concerned data !
    Coming back to the question :
    Yes you can do it. Never do it for transactional data. A lot of garbage might have been created. Master data if you are really happy with the quality do it via ALE (but do it first on a test box) .  Make sure however that all the relevant customzing is in place.  Sequence is import. What got created in DEV first must go to prod first or else you would have errors which of course can be solved but then why take the pain. Involve your FI-CO guys and Business process owners before you do it. Be a bit careful with chart of accounts !
    As I said try it on a test environment first..
    And why are people suggesting to use TDMS when it was mentioned that only customzing data is involved! Why did SAP create CTS then if customzing has to be moved via TDMS !! Or is the old point frenzy back again !
    Regards.
    Ruchit Khushu

  • I just to open every Google searched link in ( new tab ) in same webpage , when i click the link

    hello sir/mam
    i just to open every Google searched link in ( new tab ) in same webpage , when i click the link
    what to do
    please replay
    thank you

    I am not sure what you want. Do you want to open links in a new
    tab / window, or the same window you are in?
    Type '''about:preferences#general'''<Enter> in the address bar.
    Check the settings under''' Tabs'''

  • Vendor Master Data - General and Company Code Data

    Hi,
    We are collecting vendor master data requirements. The requirements that I have are for Vendor General Data, Company Code Data (Accounting Info, Payment Transactions, Correspondence etc.) and Purchasing Org Data. Out of these 3 groups I can only see Vendor General Data that is mapped to CREMDM04 in SAP supplied syndication maps. I am wondering if someone could tell me how much effort is involved to first create the structure in MDM for Company Code data and Purchasing Data and then map these additional fields to CREMDM04 fields?
    Why is it that Company Code data and Purchasing Data is not mapped in pre-delivered syndication maps?
    Thanks in advance,
    M

    Thanks Shruti for your reply.
    I agree with you. However, our client is really pushing for Company Code Data and Purchasing Org data along with Vendor General Data. Now, this is something that is new to me to do. I have never done this kind of customization before.
    I would really appreciate if someone from SAP could give me their recommendation and also help me answer the following questions
    1. Is this doable to map and syndicate Company Code data and Purchasing Org data along with Vendor General Data
    2. Is it possible to then extract the tables that hold Company Code data and Purchasing Org data from ECC and bring it back in MDM to update MDM tables (that we are going to create for this data)?
    3. What's the effort involved in this customization (Considering that we will be extending our repository structure, extend the syndication map, extract new tables from ECC for MDM, create import maps for these tables to import Company Code and Purchasing Org data into MDM)
    Regards,
    M

  • Reset company code data

    Hi SAPiens,
    I have copied xxxx India Model Co with new co code yyyy  and copied 1111 chart of accounts-India with new chart of accounts 9999. 
    I am getting an error msg when I am trying to assign Chart of accounts 9999 to company code yyyy.
    The error is :
    Reset the company code data before changing chart of accounts.
    Pls. Help me out.
    Thanks,
    Kris

    Hi,
         I think already you assigned some other chart of accounts and you did some business transactions after having any transaction data into that particular company code we con't change the chart of accounts other wise system will take the new chart of accounts.Please check it?
    Regards,
    Satya

  • How to restrict user to process own company code data in z program

    Hi All,
    I have this issue. in asset management I would like to restrict user to process its own company data.
    for example A who works in company 0123 only can process comp code 0123 data whereas X who is manager can process all company code data.
    In the abap program, how can i achive this? by authority object? if yes what asset management authority object to use?
    i have company code in selection screen. so may i know what method i can achive so that A can only execute co 0123 whereas X can do for all company code.
    thanks

    Hi,
    One way would be:
    For all persons for whom you would like to 'control' the access to a specific company, SU01-->Parameters--->Give some parameter ID say XXX, & in PArameter Value key in the compnay code whose data it can process.
    Please note that this is only one time process which has to be carried out for all the users. Then in your z-program  in SELECTIO-SCREEN OUTPUT use GET PARAMETER ID 'XXX" Field w_value. If GET PARAMETER ID returns su-subrc = 0 then move w_value to your company code on the selection screen. Then Use LOOP AT SCREEN & make SCREEN-INPUT = '0' for company code so that company code will be displayed but protected thus not allowing the user to change the company code.
    I hope this helps,
    Regards
    Raju Chitale

  • Delivery should not create with out company code data

    Hi all,
              We have created a customer master without company code data with T code VD01 and subsequently created sales order and delivery with PGI and invoice also saved but no accounting document is getting generated. But we want to stop at delivery only; system should not allow creating delivery. Please do the needful
    Thanks in advance
    Regards,
    Nagesh

    hi nagesh,.
    from standard SAP it might not be possible.
    but check this work around:
    after creating the COMPANY CODE DATA by the marketing people only you please go ahead and create a delivery till that time the sales order will be in open status.
    if you want to stop it through the SAP system:
    then you need to contact TECHNICAL PERSON on the same:
    MV45AFZZ : USEREXIT_SAVE_DOCUMENT_PREPARE for checking while creating a delivery if not created then to throw an ERROR message - this is the only probability to check
    but he may not be having solution for your query.
    except the work around.
    please check and confirm
    balajia

  • Company Code Data Automation

    Hi there,
    I've tried to search for a User Exit / BADI / BTE to update Company code data for a Customer, whenever a new customer gets created in ECC 6.0. (We have a CRM / ECC setup and the Customer typically gets created in CRM and gets replicated to ECC)
    Unfortunately, am unable to find one.
    Has anyone been involved in / come across such a scenario and if so could you pl. share your experience?
    Any other help would be gratefully acknolwedged.
    Many thanks in anticipation,
    Kind Regards
    RVS

    Hi
    Which SRM version are you using ?
    <b>Please go through the following SAP OSS Notes below -></b>
    <u>1)</u>
    Note 767058 - Company code/plant/storage location are not transferred
    <u>Related Notes</u>
    Note 737005 - Shopping cart: Company code / plant / storage location
    Note 538605 - Shopping cart: Determine company code/plant/storage location
    <u>2)  </u> 
    Note  682410 - Plant/storage location not copied from default settings
    Note  563469 - Shopping cart: no plant/storage location texts or BBP_PD 247
    Note  538605 - Shopping cart: Determine company code/plant/storage location
    Do let me know.
    Regards
    - Atul

Maybe you are looking for