New TV with no scart and Sky+ box with no HDMI

Hi, I have a new TV which only has 2 x HDMI outlets and 1 USB port. My Sky+ box has no HDMI output!! I've tried looking on Google etc for scart to HDMI leads but apparently they don't exist. The only thing I can seem to find is a converter box. When I spoke to the people I bought the TV from they told my Sky would upgrade my box lol!! Any suggestions/help please. Thanks

Phone up Sky or visit the upgrade section (http://www.sky.com/shop/customer-shop/box-upgrade/) to find out how much Sky want for a new Sky+HD box. Usually if you haven't had a discounted HD box before, your eligible for one. Although it may require some form of commitment such as a new minimum term.
If Sky are asking too much money for a new HD box just buy one second hand, there's loads on eBay. Aim to get a DRX890 or DRX895 Sky+HD box. Don't buy a Sky+HD box made by Thomson, there obsolete.
If you really want to keep your current box you would need a Scart to HDMI converter. It's impossible to do it with just a lead. But a converter could cost the same or more than a second hand HD box.

Similar Messages

Connecting sky+ box to my 20inch display

The subject kind of says it all really.
Basically I see the flow going like this:
Signal comes out of sky box on a scart -> Convert cable to dvi -> plug into display card that is on back of computer.
I really dont think it can be that simple!
But there are a few different things i have been thinking.....
1. Do I need a video/tv card to plug the sky box into?
2. As the output of the box is scart can I just get a cable to convert it to dvi, and plug it in?

Hello,
I doubt you can find a connection to go between the iBook and Sky Box.
Unless the Sky Box is Wireless and you can connect to it via your iBook network settings.
Even then, what playback software would be available for your PPC iBook to play back these programs.
Does Sky even permit programs being copied from their boxes to computers?

Can I copy recorded programmes from my sky box to my iBook ?

Can I copy recorded programmes from my sky box to my iBook ?

Hello,
I doubt you can find a connection to go between the iBook and Sky Box.
Unless the Sky Box is Wireless and you can connect to it via your iBook network settings.
Even then, what playback software would be available for your PPC iBook to play back these programs.
Does Sky even permit programs being copied from their boxes to computers?

LSO FE - No Trainings in "Messages and Notes" - Box

Hello LSO-Gurus,
my Problem concerns the following aspects:
A Learner has some Prebookings for Trainings. The Course Administrator creates some new Trainingappointments but in the Learning Portal the Learner is not able to see these new dates. The Messages and Notes box stil shows the "No Messages"-Text.
we are on EHP 4. I deleted local cookies and refreshed the Servercache, but the new dates are still not visible. Any Ideas?
Kind Regards
Sebastian

Hello,
Check if all the setting in HRLSO & SEMIN GROUP in T77S0 are correct. if Yes then consult portal consultant for any activations.
thanks
good luck

Hi, Plz help me find my stolen black iPhone5, I just bought it unlocked with 1200$ to be worked in Egypt and it was stollen from my luggage at the Airport. It was brand new and the box is sealed. It's serial no

Hi, Plz help me find my stolen black iPhone5, I just bought it unlocked with 1200$ to be worked in Egypt and it was stollen from my luggage at JFK Airport in NYC. It was brand new and the box is sealed. It's serial no# is 013330002557961. Plz help me for God's sake.

no way to track phone i the box. I doubt u can track it period.
Thats some low stuff though. What Airport where u in. I bet NYC or Chicago

I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

Headsets don't come with the iPad. All you get is the iPad, USB cable and wall charger.
Since you're new to iPad ...
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

If i replace my iphone5. will i get a new iphone5 with box and all new accessories?

if i replace my iphone5. will i get a new iphone5 with box and all new accessories?

Vague.
If you buy a new on , then yes you will get all of that.
If it is replaced under warranty, then no. You will get a service unit, could be a refurb, with no accessories - you need to keep everything but the iphone itself when you have it exchanged.

Line Cord Error when connect to Sky+ Box with BT65...

Bought a new Panasonic TV and had to re sort cables took photos and replaced exactly as before. Did connect the new TV to splitter that works fine.
BT 6500 shows Line Cord error as soon as Sky box connected on own, with micro filter, with splitter. No errors prior to today so wonder if doing something daft.
We have 3x 6500s in house is it REN related? But as worked previously a bit odd.
Extension socket behind TV to micro filter - to spliter as before. Plug in cable to SKY plus box and get a line chord error showing on handset. Disconect and fault goes but noticed this fault reported on many forums BT, Virgin ....ANY advice welcome.

make sure you have connected the cable to Sky box into correct port.... the sky box has 2... an ethernet port for a cat5 cable ( rj45 bigger port ) and an rj11 port for the phone cord.... the problem is this will fit in both!! but if connected to the ethernet port it will put a loop on line and cause fault on phone line...

Set up new iPhone 5 with iCloud restore, then iTunes created new library with only content already on phone. How do I find and sync everything in original library?

My daughter got a new iPhone 5 and we set it up using the option to restore her iPhone 4 backup from iCloud. This worked great and everything on the old phone showed up on the new phone. Because we were traveling, we weren't able to sync the iPhone 5 with iTunes at that time.
She purchased new apps and music on the iPhone 5. When we returned home she synced with iTunes, and it seems to have created a new library, with only the content currently on the phone. I don't know if it prompted her to do this on the first sync or not - she doesn't remember.
So in iTunes, the library now only shows the music on the phone. A sync isn't doing much now because when choosing the phone in iTunes and selecting each content type across the top (Apps, Music, Movies, TV Shows) the box is unchecked to sync that content. When I check the box to "Sync Music", iTunes gives a warning:
Are you sure you want to sync music? all existing songs and playlists on the iPhone Becca's iPhone will be replaced with songs and playlists from your iTunes library.
Same goes for apps, except that warning also mentions that the apps and their data will be erased and replaced.
At some point she was also getting a message that this iPhone was associated with another library, but I'm not sure how she had triggered that. She says she canceled out of that. I can see all of the music
How do we get iTunes to see the "old" library of songs, videos and apps without losing the ones she's purchased already on the iPhone? The music files themselves are still on the computer, and include music both purchased from iTunes as well as music ripped from CDs. Thanks for any advice!

See Recover your iTunes library from your iPod or iOS device.
tt2

I am trying to set up icloud on my iphone when i go to settings icloud it says verifying and a box pops up for me to sign in with my apple id but that has my old apple id on it. help??

i am trying to set up icloud on my iphone when i go to settings icloud it says verifying and a box pops up for me to sign in with my apple id but that has my old apple id on it. help??

Have you already verified your "new" email address? If not then please check your inbox for a confirmation email (also the junk folder). If you do not have a confirmation email then please sign in at https://appleid.apple.com and press "verify" for confirming your email address.

I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes

I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes, and Itunes can't find my Ipad. [email protected]

Ok, if reinstalling iTunes as suggested above does not resolve the issue of iTunes recognising the iPad then try this -
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are no faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/
As for making your new laptop your 'home computer' follow these instructions -
1. Without connecting your iPad to your computer -
A) Install iTunes / make sure the latest version of iTunes is installed.
B) Go to the Store tab and click on "Authorise This Computer".
C) Go to Edit, click on Preferences [iTunes and Preferences on Macs] and click on Devices. Put a check mark in the box next to "Prevent iPods/iPhones/iPads from syncing automatically". Click OK and close iTunes.
2. Connect your iPad to your computer -
A) Start iTunes (it will not start automatically because of the action at 1(C) above).
B) Right click on your iPad under Devices in the left column. Select "Transfer purchases".
C) When the transfer has completed, right click on your iPad again and select "Backup".
D) When the backup has completed, left click on your iPad, click on the Apps tab, and put a check mark in the box next to "Sync Apps", and then click on "Apply" (bottom right).
E) Unless you want to always do a manual sync (as I do), go back to Edit, Preferences [iTunes and Preferences on Macs] and uncheck the box next to "Prevent your iPod.....".
F) Finally, on your iPad, check that everything is syncing properly. If not, go back to iTunes and check all settings.
NB You should not lose any apps. However, any 'purchased' missing apps can be downloaded again FOC. As with updates, this must be done with the Apple ID under which they were originally 'purchased'.
Also see here as to moving your music to your new computer -
http://support.apple.com/kb/HT4527

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)... How can I open old Freehand files on this new Mac? Can I still open and work in Freehand on this new Mac?

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
How can I open old Freehand files on this new Mac?
Can I still open and work in Freehand on this new Mac?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

I am running OS X 10.9.1 on a MacBook Air....I had keychain issues that I bumbled my way through - deleted and created a new Keychain....now a box appears pretty regularly, wanting my Keychain login....i enter it and it's accepted and the box disappears.

Help..!! I'm running OS X 10.9.1 on a MacBook Air. I had keychain issues with passwords etc and bumbled my way out of it by deleting the current keychain and creating a new one with a new log-in (yes, I wrote it down this time!) But now these little boxes appear wanting my log-in ie. calendar, Safari, Outlook) and its annoying....entering the login gets rid of the box but what a pain and I know it's not right.....I know I need to enter somekind of automatic logins to these apps but how do I do that....and go easy on me, I'm not computer savvy.

Did you install the latest driver set for the device? there is a new release on motu.com for mavericks.
rachel

Good workflow to avoid white lines and discolored boxes with transperancy?

I'm somewhat new to Illustrator. I have designs in illustrator CS4 that contain objects with drop shadows that are on top of gradient backgrounds. When I save out the artwork as a PDF file I see random faint white lines and discolored boxes around the objects with the drop shadows. When I print proofs of the file on my HP3500 color laser printer I see the white lines and discolored boxes as well. I'm afraid the the lines will show up in production when I send off to the printer. Here's what I'm doing. Any suggestions would be appreciated.
(Document Raster Effects Settings: Resolution-High 300ppi/Background: Transperant/Options: preserve spot colors, add 12.7mm around object)
1. Save file as PDF from Illustrator CS4
2. PDF Settings
a. PDF Preset: PDF /xa:2001
b. Advanced Overprint and Transperancy flatener options: Preset-High Resolution
When viewed and printed from Adobe Acrobat 9 Pro there are white stiching lines that are visible.
Do I need to worry about these? Or will they go away when sent to a better printer?
Thanks for the help.

Try "Press Quality" Acrobat 5 compatable setting for "live" transparency. You can also try PDF/X-4 2008 which maintains live transparency and, in CS4, maintain Acrobat 5 compatability. PDF-X1 is a setting that "flattens" transparency which may limit your output options, depending on final output device. Double check your raster settings and make sure it is set for 300ppi/2400dpi and not 72ppi/300dpi. As suggested by Wade, your printer may not be a Postscript Level 3 output device with a RIP. So, the driver may not be screening the artwork properly and the stitching shows up in output. You may benefit from taking the file to a prepress shop and have them output a "contract" proof. If the stitching shows up in the contract proof, then the PDF setup may be the problem or the original file itself.

Hello alltogether! I use PSE 7 on my PC with windows XP and now want to change to a new Mac with the

Hello alltogether! I use PSE 7 on my PC with windows XP and now want to change to a new Mac with the newest version PSE . Is it possible to move all my albums and tags to that new version? Thank you very much for your kind answers! Candyapple111

1. Install PSE 11 in windows, upgrade your catalog, then make a full backup to a removable drive, like a usb drive, using the organizer's back up command. If you buy the boxed version you get discs for both platforms.
2. Install PSE on the mac.
3. Restore the backup to the mac. Point the restore to the .tly file in the folder, not the enclosing folder.

New TV with no scart and Sky+ box with no HDMI

Similar Messages

Maybe you are looking for