Newbie having problems with image on form

In Design, I use both the "image" and "image field" tools to place a JPG image on my form, but the image does not show up on the form (the placement is there for the image, but not the image). How can I correct this problem?

I had this same problem in the past and I'll second the notion that changing the image from CMYK to RGB easily solves the problem. Or, just make sure your image is in a .PNG format.

Similar Messages

Still having problems with images

I am still having problems putting images into an Oracle 9i database and fetching them back out.
I think I have finally managed to force a blob image into the database, but can't seem to get it back out into a byte array.
After many iterations, I have come up with something that might be getting close.
The code is listed below.
Everything has been simplified as much as I can.
The function get_user_picture_func1 returns a single blob for a specified index.
In this case, I have hardcoded the index = 3 and I think there is an image in the database for that index. (it says there are bytes there anyway).
The byte array to store the image is defined outside the method fetchImage().
byte[] imageData;
When I call fetchImage() I get the following exception:
Invalid argument(s) in call: getBytes().
at the line
imageData = picture.getBytes(zro, k);
It looks like getBytes has two parameters, Long offset, int length.
I had diagnostic statements and I confirmed that the statement:
int k = (int)picture.length(); returned k=4198 (the same size as the image).
I am at a loss to understand what the exception is trying to tell me.
I'be been trying to get this to work for a week now and am really getting burned out trying to find anything that works.
void fetchImage()
Blob picture;
String query = "{ ? = call get_user_picture_func1( ? ) }";
try
CallableStatement cs = con.prepareCall( query );
cs.registerOutParameter(1, OracleTypes.BLOB);
cs.setInt(2,3);
cs.execute();
picture = cs.getBlob(1);
if( picture != null)
InputStream in = picture.getBinaryStream();
int k = (int)picture.length();
imageData = new byte[k];
long zro = 0;
imageData = picture.getBytes(zro, k);
catch( Exception e)
}

I have been using my iPad mini with keynote to make slide presentations in my classes.There has been no problem until I upgraded to Keynote 5.3. Now the refresh rate on the iPad mini is so slow and out of sync with the projected image that I was forced to not use keynote! I have 2 years of work invested that I will have to toss unless this gets fxed. I have not had this problem with this equipment/files before. Only change was upgrade to keynote 5.3. ( Some details: I connect to the projector with a VGA cable and Apple lightining adaptor to the iPad Mini. All updates current on theiPad Mini.) Yes I did turn on and off all equipment. And I did check all cable connections. Thanks for any help you may give!

Having problem with images imported from photoshop

I am totally new to Fireworks, I am redoing a site that was done using CS2, that is GoLive, Photoshop and Image Ready. I wanted to begin familiarizing myself with Fireworks by starting with using it to make all the web images for the site (jpgs, pngs, etc). It started well but after a while I started getting strange results from FW when I imported PSD files. The PSD imports fine into FW but when I want to "preview" or do a "2-UP" and see what it looks like as a jpg or png I just get a blank image where the jpg or png is supposed to be. However if I "export" the jpg it does get exported, but I would like to preview it to see what the quality is. This doesn't happen every time but at least 50% of the time in the last 2 days, and there seems to be no rhyme or reason behind why it works with some images but not others.
Another thing is that if I add a layer effect to the image such as "inner glow" to the PS image, and then flatten the image to make sure it gets exported to FW, it doesn't get exported. It is as if I never added the layer effect in PS.
Any help on these two issues would be greatly appreciated and help me to continue in perservering with FW.
VL Branko

I don't think I've cracked open Bridge since upgrading to CS5/CS6, and I'm hesitant to start today! I'm therefore kind of assuming that you're starting with PSDs and opening them up in Fireworks. (If you're not doing this, give it a try.)
Regarding the 50% failure of Preview and 2-Up modes, I was thinking that saving the PSDs as native Fireworks PNGs—within Fireworks—might eliminate that problem. It's hard to imagine Fireworks not previewing its own file format, but easier to imagine it failing to properly preview a PSD file. And again, perhaps File > Image Preview might work better for you.
As far as the "inner glow" issue: 1) Be sure to add it into the PSD before importing into Fireworks, and 2) If it doesn't show up, have a look at Filters within the Properties panel for the selected object; you could try selecting Inner Glow within ‘Photoshop Live Effects’ or try out Fireworks' own native Inner Glow filter effect.
Other than for the purpose of familiarizing yourself with Fireworks, you may want to consider why you'd use Fireworks for these graphics, if they were originally created in Photoshop. Small changes in graphic appearance are always possible when moving between applications. For example, Photoshop is color managed whereas Fireworks is not; you therefore might notice a small shift in saturation or tonality between the two applications. Whether this is a concern depends on your final output goals.

Having problems with and advanced form to Mail PHP app in Dreamweaver

Hello,
I would like to start off by saying i am horrible when it comes to php of any kind so i use an attachment for my forms call Advanced from to Mail PHP in dreameaver for connecting my site to my email contact for user data.
I have had this problem a few times but don't remember what someone told me about a year ago, the form that i have setup is from a free template so i did not set it up. Any how i am gettiing an error where dreamweaver is stating i need to "Please Enter Valid Form" pretty sure that means the from im trying to manipulate is unreadable for this application.
Are there any PHP or form experts out there that may be able to help me in making this form readable to the app i am using in order to tie it to my email for submisions?
I will post a picture of the form i am trying to use the app on, the app and the error i am getting.
Could it be that i have to replace <label for= with <Input Name   possibly?!
Thank you so much!
The Form
<form action="../index.php">
           <h4>fill in your contact details</h4>
           <div class="form1">
             <label for="fname"> <span>first name</span>
               <input type="text" name="fname" id="fname">
                </label>
             <label for="lname"> <span>last name</span>
               <input type="text" name="lname" id="lname">
                </label>
             <label for="email3"> <span>email address</span>
               <input type="text" name="email3" id="email3">
                </label>
             <label for="phone"> <span>phone number</span>
               <input type="text" name="phone" id="phone">
                </label>
             <label for="address1"> <span>address 1</span>
               <input type="text" name="address1" id="address1">
                </label>
             <div>
               <label for="city"> <span>city</span>
                 <select name="city" id="city">
                   <option value=""></option>
                   <option value=""></option>
                   <option value=""></option>
                    </select>
                  </label>
               <label for="state"> <span>state</span>
                 <select name="state" id="state">
                   <option value=""></option>
                   <option value=""></option>
                   <option value=""></option>
                    </select>
                  </label>
                </div>
             <label for="address2"> <span>address 2</span>
               <input type="text" name="address2" id="address2">
                </label>
             <label for="zip"> <span>zipcode</span>
               <input type="text" name="zip" id="zip">
                </label>
             <label for="schedule"> <span>When Do You Prefer Us To Call? (We only call during weekdays and Saturdays)</span>
               <select name="schedule" id="schedule">
                 <option value=""></option>
                 <option value="">In the morning (Between 9am - 12nn)</option>
                 <option value="">In the afternoon (Between 1pm - 5pm)</option>
                 <option value="">In the evening (Between 6pm-7pm)</option>
                  </select>
                </label>
              </div>
           <h4> Describe the Contents of your pickup or Quote below:</h4>
           <div class="form2">
             <label for="message2">
               <textarea name="message2" id="message2" cols="30" rows="10"></textarea>
                </label>
              </div>
           <input type="submit" name="send2" id="send2" value="">
            </form>

> dreamweaver is stating i need to "Please Enter Valid Form"
It's asking for a valid 'FROM' field, not FORM.

Having problems with image resizing?

Since my upgrade to LR 3.2, I have detected a problem when resizing images at export. When I select "long edge" at 1500 pixels, I'm getting vertical images at 1500 H x 1000 W (which is correct), but horizontals are exporting at 1500 H x 2250 W, so it's reading the "long edge" selection as "height". Same problem when selecting "short edge" also exporting as image height.

Works fine for me with 3.2 under both OS/X and win7.

Having problems with my email form...

Here is my HTML form:
<form style="font-size:12px; font-family:"Arial" action="form.php" method="post">
<span class="style18">Name:</span><br/>
<input style="color: #FFFFFF; font-size: 12px; font-family: Verdana; type="text" size="25" name="Name" />
<br/>
<br/>
<br/>
<span class="style18">
Phone:</span><br/>
<input style="color: #FFFFFF; font-size: 12px; font-family: Verdana; type="text" size="25" name="Phone" />
<br/>
<br/>
<br/>
<span class="style18">Email:</span><br/>
<input style="color: #FFFFFF; font-size: 12px; font-family: Verdana; type="text" size="25" name="Email" />
<br/>
<br/>
<br/>
<span class="style18">Comments:</span><br/>
<textarea style="color: #FFFFFF; font-size: 12px; font-family: Verdana; name="Comments" cols="23" rows="7"> </textarea>
<br/>
<br/>
<br/>
<input type="submit" class="style18" value="Submit" />
</form>
Here is my PHP:
<?php
$Name = $_POST['Name'];
$Phone = $_POST['Phone'];
$Email = $_POST ['Email'];
$Comments = $_POST ['Comments'];
$msg .= "Name: " . $Name . "\n";
$msg .= "Phone: " . $Phone . "\n";
$msg .= "Email: " . $Email . "\n";
$msg .= "Comments: " . $Comments . "\n";
$headers = "From: " . $Email . "\r\n" .
"Reply-To: " . $Email . "\r\n";
mail('[email protected]', 'basic inquiry', $msg, $headers);
header('Location: confirm.html');
?>
The problem I am having is all the information is sending to my email address just fine, however, the Comments are not coming through. The email says "Comments" but the comment that was typed in is not sending through the email.
Please help...
Thank you,
cp

Try adding closing quotes after the style attribute (after Verdana;).
See " in red below
<textarea style="color: #FFFFFF; font-size: 12px; font-family: Verdana;" name="Comments" cols="23" rows="7"> </textarea>

I'm Still having problems with my contact form, can someone look at it and help me?

http://www.alpenawebdesigns.com
when I try and submit my contact form I get a 404 error something about a port 80 (I'm using port 21) I use Godaddy as a host and this contact form works in another program
http://www.bayviewdropincenter.org
can someone look at these and tell me what is the problem?
Also is there a user group in the Alpena Mi area?

The requested URL /form-to-email.php was not found on this server. Did you upload the script?
Also, please take my URL out of your footer code. Thanks.
<div id="footer">
<p>© 2012 <a href="http://alt-web.com/">Alpena Web Designs</a> all rights reserved.</p>
</div>
Finally, validate your code. You're missing a closing </div> tag for your header.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.alpenawebdesigns.com%2Fcontac tus.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Newbie having problems with noisy fan and high CPU usage in Activity Monitor

I am new to the world of Apple and have got my hands on a hand-me-down PowerBook G4 version 10.4.11. It works fairly well for everything but the Internet.
One of the first symptoms i noticed was that watching stuff on youtube was slow and jumped a lot. I checked a few things out and looked the CPU usage in activity monitor and this was about 80% to 100% when on youtube or even moving from page to page. I'e tried loads of stuff including repairing disk permissions, emptying caches and relaunching finder when the preferences file is on the desktop (not really sure what that was supposed to do).
The next thing I discovered was that if i disconnected the laptop from the mains and played youtube and some other applications the whole thing would go into sleep mode very quickly. I have got temperature monitor downloaded now although I already know it is getting very hot.
PS when it heats up the fan turns on because I can hear a whirring sound...
Would really appreciate some insight into this as it seems to be a good runner otherwise.
PS2 I have loads of free space left in the disk usage tab in activity monitor.
Big thank you in advance

Welcome to the world of PowerBook!
One of the first symptoms i noticed was that watching stuff on youtube was slow and jumped a lot. I checked a few things out and looked the CPU usage in activity monitor and this was about 80% to 100% when on youtube
Virtually no G4s are dealing well with web video anymore. The video technology used by modern developers puts a huge strain on a G4 processor. As this a choice made by coders, there is not much you can do about it. Some people suggest adding RAM but the effect is marginal considering it's the processor that's taxed.
Notebooks get hot. The fans in my 1Ghz 17-inch PowerBook from 2003 kick in between 130 and 140°F. The danger point is not until in the vicinity of 100F so don't sweat it to much. Make sure you do not cover the case bottom by setting the computer on a thick cloth placemat, pillow or other bedding item, or on your lap without a lapboard. The bootom of the case is part of the heat dissipation system and needs air under it to work
A lot of PowerBooks have, by now, lost some or all of their "feet" that gve a little space under the case. Don't bother looking for official replacements--get the silicone door/drawer bumpers from the hardware store that stick on. I found some about 3/16" thick that let more air under my PB thatn the mostly missing originals.
The next thing I discovered was that if i disconnected the laptop from the mains and played youtube and some other applications the whole thing would go into sleep mode very quickly
Your battery is likely dead from old age. Batteries only last about 2-3 years. You are seeing a sign of the battery lacking sufficient remaining capacity to run the computer. Get this utility:
http://www.coconut-flavour.com/coconutbattery/
(you'll need the 2.6.6 version for Tiger) and post what is says about "Health" and "Cycles."

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I am having problems with clone and heal. No matter what I do nothing changes in the image. Has anyone had this problem?

I am having problems with clone and heal. No matter what I do nothing changes in the image. Has anyone had this problem?

Do you have your Opacity Control set to a very low value?

Having Problem with JSP In Netscape!HELP!!!

HI to all! I�m having problem with the jsp that i have :( If i use the Internet explorer it works but at Netscape... it doesn�t work :( The value of "PTE" is null... I need help !!!Please! I think the HTML IS NOT HELPING ...
the code is :
<html>
<head>

<title>BBVA - Transferências - Transferências OIC</title>
<LINK rel=STYLESHEET type='text/css' href="estilos/tablas.css">

<script language="Javascript" src="js/banner.js"></script>
<script language="Javascript" src="js/tp_oic.js"></script>
<script language="Javascript" src="js/utilidades.js"></script>
<script language="javascript" src="js/limpar.js"></script>
<script language="javascript" src="js/tiempo.js"></script>
</HEAD>
<body marginheight="0" marginwidth="0" leftmargin="0" topmargin="0" class="pag-contenido" onLoad="controlSesion();">
<%@ include file ="includecbtf.jsp" %>
<% String s = (String)datos.get("dt");
java.util.StringTokenizer str = new java.util.StringTokenizer(s, "-");
String anoServer = str.nextToken() ;
String mesServer = str.nextToken() ;
String diaServer = str.nextToken() ;
%>

<form method="post" name="captura" action="<%=urls.get("action")%>">
<center> 
<br>

<table border="0" cellpadding="0" cellspacing="0" width="500"> 
<tr>
<td colspan="3"><img src="images/linea.gif" border="0"></td>
</tr>
<tr>
<td width="250"><img src="images/traspasos.gif" border="0"></td>
<td width="82"><img src="images/titular.gif" border="0"></td>
<td width="169" class="fondotitular"><font class="texttitular"><%=datos.get("usuario")%></font></td>
</tr>
<tr>
<td colspan="3"><img src="images/linea.gif" border="0"></td>
</tr>
</table> 
<br><br>
</center> 
<center> 

<table cellpadding="3" cellspacing="1" border="0" align="center" width="500"> 
<tr>
<td class="cabeceratitulo" colspan="2"><p class="titulotabla">Nota : As Transferências para outras Instituições de Crédito decorrem de acordo com os horários da Compensação Interbancária, não se responsabilizando o BBVA pela sua realização fora das regras em uso.</p></td>
</tr>
<tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr>
</table> 
</center> 
<center> 


<table cellpadding="3" cellspacing="1" border="0" align="center" width="500">
<tr>
<td class="cabeceratitulo" colspan="2"><p class="titulotabla">Transferência Conta a Conta para outras Instituiçôes de Crédito</p></td>
</tr>
<tr>
<td class="formgrisosc" width="100">
<p class="dato">Conta Ordenante:  </p></td>
<td class="formgrisosc" width="300">
     <%
java.util.Vector v = (java.util.Vector)(datos.get("ListaCuentas"));
java.util.Hashtable elem;
java.util.Enumeration e = v.elements();
%>

<select name="conta" size="1" class="formgrisosc">
<%
while (e.hasMoreElements()){
elem = (com.ibm.dse.base.Hashtable)(e.nextElement());
String cuenta = ((String)elem.get("s_banco")).trim() + "-"+((String)elem.get("s_oficina")).trim()+((String)elem.get("s_dcontrol")).trim()+((String)elem.get("s_num_cuenta")).trim();
out.println("<option value=\"" + ((String)elem.get("s_tipo")) + "$" + ((String)elem.get("s_clave_asunto")) + "\">" + cuenta + "</option>");
%>
</select> 
</td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Data de Processamento:</p></td>
<td class="formgriscla">
<input type="text" name="dia" size="2"class="formgriscla" value="<%=diaServer %>" maxlength="2" class="formgriscla"> /
<input type="text" name="mes" size="2"class="formgriscla" value="<%=mesServer %>" maxlength="2" class="formgriscla"> /
<input type="text" name="ano" size="4"class="formgriscla" value="<%=anoServer %>" maxlength="4" class="formgriscla"></td>
<input type="hidden" name="dact" size="2"class="formgriscla" value="<%=diaServer %>" maxlength="2" class="formgriscla">
<input type="hidden" name="mact" size="2"class="formgriscla" value="<%=mesServer %>" maxlength="2" class="formgriscla">
<input type="hidden" name="aact" size="4"class="formgriscla" value="<%=anoServer %>" maxlength="4" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Moeda: </p></td>
<td class="formgrisosc"><p class="dato">

<select name="Moeda" size="1" class="formgrisosc">
<option value="PTE" selected>Escudos</option>
<option value="EUR">Euros</option>
</select> </p>
</td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Importância:</p></td>
<td class="formgriscla"><input type="text" name="importancia" size="20" maxlength="15" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Refêrencia:</p></td>
<td class="formgrisosc"><input type="text" name="ref" size="15" maxlength="10" class="formgrisosc"></td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">NIB Beneficiário:</p></td>
<td class="formgriscla"><input type="text" name="nibBeneficiario" size="30" maxlength="21" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Descrição p/ Conta Débito:</p></td>
<td class="formgrisosc"><input type="text" name="debito" size="45" maxlength="45" class="formgrisosc"></td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Descrição p/ Conta Crédito:</p></td>
<td class="formgriscla"><input type="text" name="credito" size="45" maxlength="45" class="formgriscla"></td>
</tr>
<tr>
<td class="cabecera" colspan="2"><img src="images/1x1.gif" width=1 height=3 border="0"></td>
</tr>
</table> 
</center> 
<center> 

<table border="0" cellspacing="2" cellpadding="0">
<tr>
<td valign="top"><img src="images/limpar.gif" border="0" alt="Apagar"></td>
<td valign="top"><img src="images/continuar.gif" border="0" alt="Continuar"></td>
</tr>
</table> 
</form> 
</center> 
</body> 
</html> 
Thanks pepole!

thanks people! when i try to validate the action "PTE" he gaves me (if i put a ALERT...) null.
the js code is : (Moeda is coin )
//testa amount
// var ent = (f.amount.value);
var tamanho = f.amount.value.length;
var valor = f.amount.value;
decimals = 2; // Apenas pode ter duas casas decimais?
if (((tamanho == 0) || (valor == 0)) && ok)
alert ("A import�ncia tem de ser maior que zero.");
f.amount.focus();
f.amount.select();
ok = false;
else
     alert(f.Moeda.value);
if((f.Moeda.value=="PTE") && ok)
for (j = 0; j < tamanho; j++)
xx = valor.charAt(j);
     if ((!(xx.match(numeroER)) && ok))
alert ("O Campo Import�ncia deve ser num�rico inteiro.");
     f.amount.focus();
     f.amount.select();
     ok = false;
          //if para limitar valor dos Escudos
     if (ok)
     if (eval(valor) > 1000000)
     alert ("The field amount must be maxium 1 000 000 Pte.");
     f.amount.focus();
     f.amount.select();
     ok = false;
else
     if (ok)
          //function checkDecimals(f.amount, f.importancia.value) {
          if (isNaN(valor)) {
               alert("O Campo Import�ncia deve ser num�rico e como separador decimal, o ponto.");
               f.amount.select();
               f.amount.focus();
               ok = false;
          else {
               timeshundred = parseFloat(valor * Math.pow(10, decimals));
               integervalue = parseInt(parseFloat(valor) * Math.pow(10, decimals));
               if (timeshundred != integervalue)
               alert ("Apenas pode ter " + decimals + " casas decimais. Por favor tente outra vez.");
               f.amount.select();
               f.amount.focus();
               ok = false;
          if (ok)
          { //if to limit the value of the Euros
     if(eval(valor) > 4988)
alert ("The field amount must be maxium 4988 Eur.");
     f.amount.focus();
     f.amount.select();
     ok = false;
}//end of amount

I am having problem with MDV Studio.

Hello happy guys, whatzup? Guess all ya 'r doing fine? Right!
I am using Dreamweaver from Macromedia Studio 2004. I am having problem with Inserting Record into Access database using the forms I create on my .asp document. I am using IIS and Javascript as my Document Technology. The error I usually have is:
"Technical Information (for support personnel)
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
/site_files/user_regform.asp, line 78
Browser Type:
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/530.5 (KHTML, like Gecko) Chrome/2.0.172.28 Safari/530.5
Page:
POST 41 bytes to /site_files/user_regform.asp
POST Data:
uname=Honesty&pword=admin&MM_insert=form1
Time:
Tuesday, June 02, 2009, 1:49:39 PM"
Please I need assistance on how to solve this problem. Thank you.
Similarly, I don't really know how to write sql strings - I just give commands and Dreamweaver will generate the sql strings. Yet, I still observe errors. But I think, for the sql aspect, I'm undergoing a tutorial note that I downloaded on the internet.
Please help me to solve this error problem at the moment. The sql knowledge is not the problem. I can get that at my leisure.
Thank you.
Eyo Eyo (Nigeria).

It sounds like you do not have an internet connection (wifi arcs in the upper left does not mean you have a connection) since Safari does not work also.. Try the following:
- Reset the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

Newbie having problems with image on form

Similar Messages

Maybe you are looking for