Having problems with image resizing?

Since my upgrade to LR 3.2, I have detected a problem when resizing images at export. When I select "long edge" at 1500 pixels, I'm getting vertical images at 1500 H x 1000 W (which is correct), but horizontals are exporting at 1500 H x 2250 W, so it's reading the "long edge" selection as "height". Same problem when selecting "short edge" also exporting as image height.

Works fine for me with 3.2 under both OS/X and win7.

Similar Messages

Still having problems with images

I am still having problems putting images into an Oracle 9i database and fetching them back out.
I think I have finally managed to force a blob image into the database, but can't seem to get it back out into a byte array.
After many iterations, I have come up with something that might be getting close.
The code is listed below.
Everything has been simplified as much as I can.
The function get_user_picture_func1 returns a single blob for a specified index.
In this case, I have hardcoded the index = 3 and I think there is an image in the database for that index. (it says there are bytes there anyway).
The byte array to store the image is defined outside the method fetchImage().
byte[] imageData;
When I call fetchImage() I get the following exception:
Invalid argument(s) in call: getBytes().
at the line
imageData = picture.getBytes(zro, k);
It looks like getBytes has two parameters, Long offset, int length.
I had diagnostic statements and I confirmed that the statement:
int k = (int)picture.length(); returned k=4198 (the same size as the image).
I am at a loss to understand what the exception is trying to tell me.
I'be been trying to get this to work for a week now and am really getting burned out trying to find anything that works.
void fetchImage()
Blob picture;
String query = "{ ? = call get_user_picture_func1( ? ) }";
try
CallableStatement cs = con.prepareCall( query );
cs.registerOutParameter(1, OracleTypes.BLOB);
cs.setInt(2,3);
cs.execute();
picture = cs.getBlob(1);
if( picture != null)
InputStream in = picture.getBinaryStream();
int k = (int)picture.length();
imageData = new byte[k];
long zro = 0;
imageData = picture.getBytes(zro, k);
catch( Exception e)
}

I have been using my iPad mini with keynote to make slide presentations in my classes.There has been no problem until I upgraded to Keynote 5.3. Now the refresh rate on the iPad mini is so slow and out of sync with the projected image that I was forced to not use keynote! I have 2 years of work invested that I will have to toss unless this gets fxed. I have not had this problem with this equipment/files before. Only change was upgrade to keynote 5.3. ( Some details: I connect to the projector with a VGA cable and Apple lightining adaptor to the iPad Mini. All updates current on theiPad Mini.) Yes I did turn on and off all equipment. And I did check all cable connections. Thanks for any help you may give!

URGENT: Heap space problems with image resizing

I'm creating a Swing program, with an InternalFrame-type interface. One of the frames contains a .gif file background and then primitive G2D objects are drawn on top of it.
The background image loads and displays fine at its original size, but I've added code for when the window resizes, and resizing the image causes the VM to give me an OutOfMemory exception.

I tried this without any problem (with a gif of 137 kb):
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class ImageFrame extends JFrame {
    public ImageFrame() {
        initComponents();
        Toolkit T=this.getToolkit();
        im0=T.getImage("C:\\sophie.gif");
        MediaTracker mediaTracker = new MediaTracker(this);
        mediaTracker.addImage(im0, 1);
        try {
            mediaTracker.waitForID(1);
        } catch (InterruptedException ie) {
            System.err.println(ie);
        jInternalFrame1.add(new MyPanel());
    private void initComponents() {
        jDesktopPane1 = new JDesktopPane();
        jInternalFrame1 = new JInternalFrame();
        setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
        jInternalFrame1.setResizable(true);
        jInternalFrame1.setVisible(true);
        jInternalFrame1.addComponentListener(new ComponentAdapter() {
            public void componentResized(ComponentEvent evt) {
                jInternalFrame1ComponentResized(evt);
        jInternalFrame1.setBounds(0, 0, width, height);
        jDesktopPane1.add(jInternalFrame1, JLayeredPane.DEFAULT_LAYER);
        getContentPane().add(jDesktopPane1, BorderLayout.CENTER);
        Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
        setBounds((screenSize.width-800)/2, (screenSize.height-500)/2, 800, 500);
    private void jInternalFrame1ComponentResized(ComponentEvent evt) {
        width=jInternalFrame1.getWidth();
        height=jInternalFrame1.getHeight();
    public static void main(String args[]) {
        new ImageFrame().setVisible(true);
    private int width=500,height=300;
    private Image im0;
    private JDesktopPane jDesktopPane1;
    private JInternalFrame jInternalFrame1;
    class MyPanel extends JPanel {
        public void paint(Graphics g1) {
            g1.drawImage(im0,0,0,width,height,this);
            g1.dispose();
}

Having problem with images imported from photoshop

I am totally new to Fireworks, I am redoing a site that was done using CS2, that is GoLive, Photoshop and Image Ready. I wanted to begin familiarizing myself with Fireworks by starting with using it to make all the web images for the site (jpgs, pngs, etc). It started well but after a while I started getting strange results from FW when I imported PSD files. The PSD imports fine into FW but when I want to "preview" or do a "2-UP" and see what it looks like as a jpg or png I just get a blank image where the jpg or png is supposed to be. However if I "export" the jpg it does get exported, but I would like to preview it to see what the quality is. This doesn't happen every time but at least 50% of the time in the last 2 days, and there seems to be no rhyme or reason behind why it works with some images but not others.
Another thing is that if I add a layer effect to the image such as "inner glow" to the PS image, and then flatten the image to make sure it gets exported to FW, it doesn't get exported. It is as if I never added the layer effect in PS.
Any help on these two issues would be greatly appreciated and help me to continue in perservering with FW.
VL Branko

I don't think I've cracked open Bridge since upgrading to CS5/CS6, and I'm hesitant to start today! I'm therefore kind of assuming that you're starting with PSDs and opening them up in Fireworks. (If you're not doing this, give it a try.)
Regarding the 50% failure of Preview and 2-Up modes, I was thinking that saving the PSDs as native Fireworks PNGs—within Fireworks—might eliminate that problem. It's hard to imagine Fireworks not previewing its own file format, but easier to imagine it failing to properly preview a PSD file. And again, perhaps File > Image Preview might work better for you.
As far as the "inner glow" issue: 1) Be sure to add it into the PSD before importing into Fireworks, and 2) If it doesn't show up, have a look at Filters within the Properties panel for the selected object; you could try selecting Inner Glow within ‘Photoshop Live Effects’ or try out Fireworks' own native Inner Glow filter effect.
Other than for the purpose of familiarizing yourself with Fireworks, you may want to consider why you'd use Fireworks for these graphics, if they were originally created in Photoshop. Small changes in graphic appearance are always possible when moving between applications. For example, Photoshop is color managed whereas Fireworks is not; you therefore might notice a small shift in saturation or tonality between the two applications. Whether this is a concern depends on your final output goals.

Problem with image resizing. Lightroom 5.7.

Hi, i've got Lightroom 5.7 and have the following problem. When i export photos in the jpg format with custom image sizing 4600 x 3000, it produces 4500 x 3000. How can I fix it? Thank you.

hi, dj_paige!
i tried and it worked. but then i created a new collection with different photos and also wanted to crop them 23x15. but when i chosed from the list of custom crops, first it was no available, so then i created again the same custom crop 23x15 and lightroom didn't create it, instead it chooses 6.5x10. it looks like that lightroom switches to the previous custom crop instead of using a new one. how can i fix it?
thank you,
anna

Problem with image resize after canvas resize in CS6

In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it.
Resize the canvas (Image > Canvas Size) to 250px x 250 px.
Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
Any ideas??

Please post the Action set *.atn file and name of the action in the set.
What you wrote seems like normal operation.
Duplicate the layer and then hide it.
Resize the canvas (Image > Canvas Size) to 250px x 250 px.
Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
There is no reason to hide and unhide the layer.
When you change Canvas Size the only layer the may actually get changed is the "Background Layer" for the bankground layer does not suppoty tranparency so Pixels of some color will be added to the background layer if your increasing canvas size or Pixels will be cropped off the background layer if you decreasing canvas size. Canvas Size = Document Size = Image size. Canvas size change does not change the size of other layer. Only their position over the canvas may change. Layers other then the background layer can be any size. They can be the same size as the canvas size or they may be larger or smaler then the canvas size and they can have any aspect ratio and any shape. As you saw when you ise free transform on your layer.

Newbie having problems with image on form

In Design, I use both the "image" and "image field" tools to place a JPG image on my form, but the image does not show up on the form (the placement is there for the image, but not the image). How can I correct this problem?

I had this same problem in the past and I'll second the notion that changing the image from CMYK to RGB easily solves the problem. Or, just make sure your image is in a .PNG format.

My iPod Touch 3rd Gen is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. Is this a common problem? Is there a fix?

My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?

Try this for the freezing
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
Or if they don't work put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I am having problems with clone and heal. No matter what I do nothing changes in the image. Has anyone had this problem?

I am having problems with clone and heal. No matter what I do nothing changes in the image. Has anyone had this problem?

Do you have your Opacity Control set to a very low value?

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

Having problem with dead key in Leopard

Hello. I'm having problem with dead key in Leopard.
In Tiger it was working, but in Leopard dead key "'" doesn't work.
In Tiger I could use OPTION key as well to get Latvian special characters (both worked - OPTION Key and dead-key), but in LEOPARD OPTION key is the only possibility to get these characters.
How can I get dead key "'" working?
I'm using Latvian language with Latvian keyboard layout.
Here are images how it looked in Tiger:
1) Before dead key is pressed:
http://amerix.no-ip.org/tmp/1.tiff
2) After dead key is pressed:
http://amerix.no-ip.org/tmp/2.tiff

ok, i got answer
so - first problem was that ukelele didn't work in leopard (it wasn't possible to start new layout), but it was possible to edit Tom Gewecke posted layout.
There it is possible to change every thing (dead-key as well).
So I edited it and now i have layout where dead-key works -
http://amerix.no-ip.org/tmp/LatvianT.keylayout
Just do what Tom Gewecke said with this layout. It should work!

Having Problem with JSP In Netscape!HELP!!!

HI to all! I�m having problem with the jsp that i have :( If i use the Internet explorer it works but at Netscape... it doesn�t work :( The value of "PTE" is null... I need help !!!Please! I think the HTML IS NOT HELPING ...
the code is :
<html>
<head>

<title>BBVA - Transferências - Transferências OIC</title>
<LINK rel=STYLESHEET type='text/css' href="estilos/tablas.css">

<script language="Javascript" src="js/banner.js"></script>
<script language="Javascript" src="js/tp_oic.js"></script>
<script language="Javascript" src="js/utilidades.js"></script>
<script language="javascript" src="js/limpar.js"></script>
<script language="javascript" src="js/tiempo.js"></script>
</HEAD>
<body marginheight="0" marginwidth="0" leftmargin="0" topmargin="0" class="pag-contenido" onLoad="controlSesion();">
<%@ include file ="includecbtf.jsp" %>
<% String s = (String)datos.get("dt");
java.util.StringTokenizer str = new java.util.StringTokenizer(s, "-");
String anoServer = str.nextToken() ;
String mesServer = str.nextToken() ;
String diaServer = str.nextToken() ;
%>

<form method="post" name="captura" action="<%=urls.get("action")%>">
<center> 
<br>

<table border="0" cellpadding="0" cellspacing="0" width="500"> 
<tr>
<td colspan="3"><img src="images/linea.gif" border="0"></td>
</tr>
<tr>
<td width="250"><img src="images/traspasos.gif" border="0"></td>
<td width="82"><img src="images/titular.gif" border="0"></td>
<td width="169" class="fondotitular"><font class="texttitular"><%=datos.get("usuario")%></font></td>
</tr>
<tr>
<td colspan="3"><img src="images/linea.gif" border="0"></td>
</tr>
</table> 
<br><br>
</center> 
<center> 

<table cellpadding="3" cellspacing="1" border="0" align="center" width="500"> 
<tr>
<td class="cabeceratitulo" colspan="2"><p class="titulotabla">Nota : As Transferências para outras Instituições de Crédito decorrem de acordo com os horários da Compensação Interbancária, não se responsabilizando o BBVA pela sua realização fora das regras em uso.</p></td>
</tr>
<tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr>
</table> 
</center> 
<center> 


<table cellpadding="3" cellspacing="1" border="0" align="center" width="500">
<tr>
<td class="cabeceratitulo" colspan="2"><p class="titulotabla">Transferência Conta a Conta para outras Instituiçôes de Crédito</p></td>
</tr>
<tr>
<td class="formgrisosc" width="100">
<p class="dato">Conta Ordenante:  </p></td>
<td class="formgrisosc" width="300">
     <%
java.util.Vector v = (java.util.Vector)(datos.get("ListaCuentas"));
java.util.Hashtable elem;
java.util.Enumeration e = v.elements();
%>

<select name="conta" size="1" class="formgrisosc">
<%
while (e.hasMoreElements()){
elem = (com.ibm.dse.base.Hashtable)(e.nextElement());
String cuenta = ((String)elem.get("s_banco")).trim() + "-"+((String)elem.get("s_oficina")).trim()+((String)elem.get("s_dcontrol")).trim()+((String)elem.get("s_num_cuenta")).trim();
out.println("<option value=\"" + ((String)elem.get("s_tipo")) + "$" + ((String)elem.get("s_clave_asunto")) + "\">" + cuenta + "</option>");
%>
</select> 
</td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Data de Processamento:</p></td>
<td class="formgriscla">
<input type="text" name="dia" size="2"class="formgriscla" value="<%=diaServer %>" maxlength="2" class="formgriscla"> /
<input type="text" name="mes" size="2"class="formgriscla" value="<%=mesServer %>" maxlength="2" class="formgriscla"> /
<input type="text" name="ano" size="4"class="formgriscla" value="<%=anoServer %>" maxlength="4" class="formgriscla"></td>
<input type="hidden" name="dact" size="2"class="formgriscla" value="<%=diaServer %>" maxlength="2" class="formgriscla">
<input type="hidden" name="mact" size="2"class="formgriscla" value="<%=mesServer %>" maxlength="2" class="formgriscla">
<input type="hidden" name="aact" size="4"class="formgriscla" value="<%=anoServer %>" maxlength="4" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Moeda: </p></td>
<td class="formgrisosc"><p class="dato">

<select name="Moeda" size="1" class="formgrisosc">
<option value="PTE" selected>Escudos</option>
<option value="EUR">Euros</option>
</select> </p>
</td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Importância:</p></td>
<td class="formgriscla"><input type="text" name="importancia" size="20" maxlength="15" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Refêrencia:</p></td>
<td class="formgrisosc"><input type="text" name="ref" size="15" maxlength="10" class="formgrisosc"></td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">NIB Beneficiário:</p></td>
<td class="formgriscla"><input type="text" name="nibBeneficiario" size="30" maxlength="21" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Descrição p/ Conta Débito:</p></td>
<td class="formgrisosc"><input type="text" name="debito" size="45" maxlength="45" class="formgrisosc"></td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Descrição p/ Conta Crédito:</p></td>
<td class="formgriscla"><input type="text" name="credito" size="45" maxlength="45" class="formgriscla"></td>
</tr>
<tr>
<td class="cabecera" colspan="2"><img src="images/1x1.gif" width=1 height=3 border="0"></td>
</tr>
</table> 
</center> 
<center> 

<table border="0" cellspacing="2" cellpadding="0">
<tr>
<td valign="top"><img src="images/limpar.gif" border="0" alt="Apagar"></td>
<td valign="top"><img src="images/continuar.gif" border="0" alt="Continuar"></td>
</tr>
</table> 
</form> 
</center> 
</body> 
</html> 
Thanks pepole!

thanks people! when i try to validate the action "PTE" he gaves me (if i put a ALERT...) null.
the js code is : (Moeda is coin )
//testa amount
// var ent = (f.amount.value);
var tamanho = f.amount.value.length;
var valor = f.amount.value;
decimals = 2; // Apenas pode ter duas casas decimais?
if (((tamanho == 0) || (valor == 0)) && ok)
alert ("A import�ncia tem de ser maior que zero.");
f.amount.focus();
f.amount.select();
ok = false;
else
     alert(f.Moeda.value);
if((f.Moeda.value=="PTE") && ok)
for (j = 0; j < tamanho; j++)
xx = valor.charAt(j);
     if ((!(xx.match(numeroER)) && ok))
alert ("O Campo Import�ncia deve ser num�rico inteiro.");
     f.amount.focus();
     f.amount.select();
     ok = false;
          //if para limitar valor dos Escudos
     if (ok)
     if (eval(valor) > 1000000)
     alert ("The field amount must be maxium 1 000 000 Pte.");
     f.amount.focus();
     f.amount.select();
     ok = false;
else
     if (ok)
          //function checkDecimals(f.amount, f.importancia.value) {
          if (isNaN(valor)) {
               alert("O Campo Import�ncia deve ser num�rico e como separador decimal, o ponto.");
               f.amount.select();
               f.amount.focus();
               ok = false;
          else {
               timeshundred = parseFloat(valor * Math.pow(10, decimals));
               integervalue = parseInt(parseFloat(valor) * Math.pow(10, decimals));
               if (timeshundred != integervalue)
               alert ("Apenas pode ter " + decimals + " casas decimais. Por favor tente outra vez.");
               f.amount.select();
               f.amount.focus();
               ok = false;
          if (ok)
          { //if to limit the value of the Euros
     if(eval(valor) > 4988)
alert ("The field amount must be maxium 4988 Eur.");
     f.amount.focus();
     f.amount.select();
     ok = false;
}//end of amount

Problem with Image.createImage()

Hi all!
I'm writing a simple midlet just to display an image on the screen and I'm having some problems with Image.createImage()
Here is my code
Image bg_img;
ImageItem imageItem1;
imageItem1 = new ImageItem("", null,ImageItem.LAYOUT_DEFAULT, "");
try{
bg_img = Image.createImage("/image.png");
imageItem1.setImage(bg_img);
catch(java.io.IOException e){
e.printStackTrace();
I'm getting an exception on bg_img = Image.createImage("/image.png");
I can't understand what is it...:(
I know for sure that the problem is not "file not found"
Any one can help me???

If you are catching IOException, then u may have problem with ur image path. "image not found on the specified path." if ur image is not in the current directiry then put it into current directory. otherwise, If u are using resouce folder and it is already included into the resouce path, then put ur image in that folder..try this..
Still not get, then please give some detail about ur development toolkit. and ur apllication packaging scheem. are you using ANT?
Pranav

Having problems with image resizing?

Similar Messages

Maybe you are looking for