Newbie question - how to add a computer not on your network?
We purchased the ARD 3.0 for our networked Macs and so far it's been working fine. But we also have a remote user we'd like to add. This person is using a cable modem to connect to our VPN now but is moving and may have to use dial-up for a while.
So, how do I add them to this list? Get their IP address? What if the IP address changes?
Thanks
"So, how do I add them to this list?"
"File" menu --> Add by address.
But you should forget about supporting this user if they have a dialup connection, as it is far to slow to do 95% of ARDs tasks...especially control and observe.
"What if the IP address changes?"
Set up the computer with a dynamic hostname at dyndns.com
Similar Messages
-
Newbie question - how to format timeline to not show hours?
Hello - trying out Premiere after giving up on (gasp) iMovie
I make very short videos - from 30+sec to 5 minutes. I don't need the timeline to show so much detail. The hours are meaningless. I also am not yet trying to sync audio with precision I don't need the fractions of seconds.
Can I control that in the display is Premier 2014?
Thanks!!
KatieYes you can controle the timeline but not the way you want.
Its either timecode (more options rightclick on playhead position) or audiounits (1/48000 per second).
Its default set to hours-minutes-seconds-frames.
The more you zoom in on the timeline the more specific it gets. -
QUESTION: HOW TO ADD OWN SUBJECT IN CCMS
Hi, All
QUESTION: HOW TO ADD OWN SUBJECT IN CCMS
In NW2004s SP20, kernal 4.6C WebAs 620
I add paramater in RZ21, Method: CCMS_OnAlert_Eamil , Paramater: SUBJECT_ALERT value CCMS Alert from XDV
But nothing changed when I received e mail it same look like CCMS alerts XDV 20080528 104346
How can I do that please advicse
ThanksHI,
Refer
Blog to implement the email notification:
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies
http://help.sap.com/saphelp_nw04/helpdata/en/ce/c193d07a7343ff9a81db1bdc97b2f7/frameset.htm
Monitoring with Solution Manager
http://help.sap.com/saphelp_nw04/helpdata/en/1a/40f83ee0e66856e10000000a114084/frameset.htm
Configuring the Alert monitoring of Solution Manager 4.0
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 8:07 PM -
Newbie Question: How much computer do I need?
Newbie Question:
I would like to use MainStage 3 in a live performance environment to play bars, parties, etc. I'm not looping, using it to playback recordings, processing outboard equipment or vocal processing. I want to stop carrying Rolands, Nords, Korgs, etc and get to a controller and a rack with a Mac Mini in it.
I tested a download of Mainstage 3 on my home Mac Mini (late 2012, 3.5 Ghz i5, 4GB RAM, 500GB drive) and it seemed to run fairly well. $30 well invested so I trekked forward... I purchased a Mac Mini (late 2009, 2.52GHz Core 2 Duo, 6GB RAM, 128GB SSD) for $200. I started to do more elaborate keyboard setups to see how the CPU would hold up. It typically runs from 30% to 50% of capacity (CPU and Memory) It actually boots and runs better than the i5. I hear the occasion gitch, but it actually seems to be getting better in time (or I'm rock and roll deaf.
I got a rack, an Airport Express, a Radial USB interface and a Nektar Panorama P6. It's starting to get expensive, but I'm emboldened by the actual quality for the sound and the flexibility of arranging for live performance. What used to take me two and three keyboards to play, I can now fit on one performance patch.
OK, now the question... am I at the limits of this little Core 2 Duo? Should I upgrade the i5 with more RAM and a bigger SSD and use that? Should I get a new(er) i7 and bite the $1,500 bullet for the additional RAM and SSD?
I see that most of you are running pretty nice Macbook Pros with i7 and lots of everything. My needs are modest; am I OK?
BTW, I want to run a Mac Mini in a box because I don't want to carry a laptop out in the open. If I was doing bigger shows I wouldn't care but I play some rowdy bars and constantly have folks hanging off me while I'm playing. It's fun, but hard on gear. If you can't drop it or dip it in beer, it won't last long where I work.
Matt DonnellyRule of thumb: newer and faster is better. But, depending the complexity of your needs you may be OK with an older Mac. Some glitches that happen in a live performance are due to loss of communication with USB or Firewire inputs, so make sure they're secure. I recently upgraded from a 2010 Mac Mini 2.6 dual core with 16 GB RAM, which was used live for nearly four years, to the latest Mac Mini 3.0 i7 with 16 GB RAM and a 500 GB SSD. I was getting an occasional stuck note with the older one. The new one is rock solid. Some of my patches may have up to a dozen channel strips mapped to three keyboards. The Mini is mounted in a rack next to a MOTU Ultralite Hybrid. It is a good idea to map a panic button on your keyboard to controller # 123(all notes off). Also, you might want to invest in a battery backup power supply(APC, Cyberpower, etc.-$40-$60) to protect your Mac against power loss, which can damage you hard drive.
-
How to add a computed field to a reports
I have a report where I would like to add a column that is the sequence of the row. It is not the rownum in the db, but I want it to be a row number for what is returned.
So, if I return 10 records, I would like a column to contain 1 through 10 to depict the row number.
I do not want to have this number in the table or view.
Is it possible to add a computed field to a report like this?
If so, how?
Thanks - JimThe SQL function rownum should suffice if the report is not too complicated, as this returns the number of the row rather than the database row ie.
select empno,ename,rownum
from emp
add some clauses each time and you should see that each row is always numbered 1 to n.
However, if you introduce the HTMLDB column sort functionality into the report then it would appear that it is the result set that is sorted rather than a new query being issued.
Hope this is of help. -
How to add a computer to the newtwork
How do I add other computers to the WIFI network?
I assume the all of these computers will be Wi-Fi ready. If so, all that is needed is for each to connect to your Wi-Fi network. Now depending on what you want each of these computers to do, you would configure each as appropriate. For example, if you want to share files between computers, each computer that will be sharing these files must be configured for sharing.
-
Anyone know how to add a wait to a phone number?
Thanks> Is this possible to add wait
No, this does not make any sense.
The BPM waits for the response anyway.
You could change the scenario to an asynchonous pair of messages.
But in my opinion the error is inside the ECC, because the response from ECC is not correct. -
How to add a computer to Mac Mini server network?
Hello,
Can anyone tell me how to add a Mac Air to the computers my Mac Mini server recognizes? Currently, I cannot share files between computers.
Thanks for any help!Hmmm, not sure which end the problem is on, if you don't get an answer here you might post over here...
https://discussions.apple.com/community/servers_enterprise_software/mac_os_x_lio n_server -
Question: How to add a Sandbox system as a second Quality System?
Dear experts,
I am kindly asking for your help and asking you to write me exact procedure on how to do this.
We have a 3 system landscape - DEV, QAS and PRD. There are 2 routes from DEV and QAS:
ZDEV and the SAP standard route and a delivery route from QAS to PRD.
We also have built a Sandbox system, which we temporarily need to include in TMS, in order
to perform a few transports from our DEV system to the Sandbox. When doing a transport
(not sure exactly at which step), the system has to offer a choice, whether the transport to be
imported in the QAS or in the sandbox.
For sure I know that we will need to make /usr/sap/trans shared to the sandbox as well.
Then I am kindly asking you to explain exactly how to setup this configuration.
I am relying very much on your help, as I made quite bad experience with OSS messages, which
are hanging for weeks without any answer... And I believe that this forum is faster and more precisely
answered, than OSS messages. And we have 4 non-working days ahead, and right on tuesday in the
morning I need to implement this configuration!
Many many thanks in advance!!Hi Symon,
You're right, the first step is to ensure that the SAPService<SID> user for your sandbox (let's call it SAPServiceSBX) must have the same level of access to /usr/sap/trans on your transport domain controller (usually, but not always, your DEV system) as the other systems in the transport domain. If you are in a Windows Active Directory environment, this is most easily accomplished by adding the SAP_SBX_GlobalAdmin Active Directory group to the SAP_LocalAdmin local group on the DEV system. Your SAPServiceSBX user should have already been a member of SAP_SBX_GlobalAdmin as part of the normal installation process when you created the SBX system. If you are on another OS, I can't really help you there, but it must achieve the same effect of granting that file system access.
Next, you need to tell SBX how to find the domain controller. Log on to SBX as an administrative user and start transaction RZ10. Open your DEFAULT profile and, if it's not already there or has something different, put in an entry with Parameter Name = SAPTRANSHOST and Parameter Value = the host name of your domain controller, i.e. your DEV system, where the /usr/sap/trans directory resides. Save and activate the profile. If you made a change here, you will probably need to restart the SBX system for it to take effect. In the old days, you would have to add a SAPTRANSHOST entry to your hosts file on the operating system level and/or add it as an environment variable for your sidadm OS user, but I don't think that's necessary anymore, if you put it in the profile.
After the restart, logon to SBX again, this time to client 000, as an administrative user and start transaction STMS. Most likely, if SBX isn't a member of a transport domain already, you will get a popup asking you to add it to one (or to create one). If so, put in the name of the transport domain (probably DOMAIN_DEV, but you can find it out by going into STMS on the DEV system), and any other details about the DEV system that it asks for. If you don't get a popup, then select Extras... Delete TMS Configuration to reset it so that you are starting over fresh (you may have created a standalone transport domain just for SBX when you installed it, and if so you need to delete that so it can join your DEV domain). You should get a message then that the system is waiting to be approved for inclusion in the domain.
Now go logon to your DEV system and start STMS, then call up the System Overview. If necessary, refresh the list. You should see your SBX system there with a status indicating it's waiting for inclusion. Click on the symbol, or select SBX and click in the menu SAP System... Approve, and now it should be in. Once that's done, highlight all the systems in the list, then click SAP System... Update Configuration to distribute the information about the new system to all systems in the domain. Now select SAP System... Check... and go through the three tests respectively to ensure everything is working.
Back out of the system overview and go into Transport Routes. Refresh if necessary. You should see your ZDEV and SAP transport routes you mentioned earlier, and SBX should now show up as a Single System. It's fine to leave it this way, and if this is temporary, I recommend leaving it this way. Check the configuration for consistency, then select Configuration... Distribute and Activate (you can also do this from SBX with Adjust with Controller).
That should be all you have to do to set it up. You can do some further tests to ensure the Transport Groups configuration is good (from the System Overview screen).
Because you have configured SBX as a Single System, transports released from DEV won't automatically show up in the SBX import queue. However, you can forward transports there easily. From the SBX system, in STMS, in the Import Overview, select the import queue (or import history) of your QAS system and highlight the transports you want in SBX. Choose Request... Forward... System and select your SBX system. They should now show up in the SBX import queue ready for import as normal.
I hope this helps.
Best regards,
Matt -
How to add a "item not null" condition to an existing request condition ?
Hi,
I have a condition for displaying a region ;
Request Is NOT Contained within Expression 1
Expression 1 value is : "GET_DETAIL_MONTH || GET_DETAIL_DAY"
It works fine.
But the problem is that I would like to add a condtion to this. This condition would be that the item P10_DEPT is not NULL.
How to do ?
Thank you for your kind answers.Hello,
Swith the condition type to a PL/SQL Expression and enter
(:P10_DEPT IS NOT NULL) and (:REQUEST NOT IN ('GET_DETAIL_MONTH','GET_DETAIL_DAY'))
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-) -
How to add another Computer to my Apple TV?
I've had my apple TV for a while and really like it. If I rember correctly it used to be easy to add another computer to my Computer list on Apple TV. But for some reason I can't seem to do it anymore.
I intend to take my main home imac down for maintenance over the weekend. I run my itunes library from an external hard drive.
What I want to do is take my external drive with my itunes library and connecvt it to my macbook and run my apple TV from there while my main imac is down.
I thought that if I launched the itunes on the macbook, then enabled homesharing then my macbook would appear on my apple TV compuers list and I could just select it..
But it doesn't!
Any ideas?
One thng that it maybe is that my apple TV is connected to my imac via a physical eithernet.
Would it make sence to diosconnect that and go WiFi and then see if my apple TV picks up the macbook?
Thanks for any advise!Is the MB setup with the same home sharing ID as the iMac? It should make no difference whether you are on wifi or ethernet, in fact any issues with discovery are typically related to wifi.
-
Asset related question - How to add a record into table ANLC?
Hello experts,
Could anyone tell me how to add a record into table ANLC?
Thanks very much!
Christina.how you want add?
you want add direct in table???.
Normally if yo post any transaction this table will update.
ex;acquisition;
chandra -
Could not complete your request because an unknown or invalid JPEG marker type is found
The above messagecomes up on a lot of my photoshop files that have been recovered from a damaged disk - can this be fixed?
Thanks, Phil.That's a pretty good indication that the data inside the files is corrupted.
You *might* be able to get some of the image back by opening it in different tools that can open JPEGs. But very likely none will be able to recover all the image data perfectly.
Check Irfan View as a viewer with some resiliency for opening corrupted files.
-Noel -
How do you find who's on your network
I have 6 machines on my AP network for my office & home business. I do not have it password protected. But I have a neighbor who says he can pick up my signal on his laptop. Is there a way to find out who's machine is on your network?
I strongly recommend you password protect your network right away. It doesn't matter who is on your network if even one person is unauthorized. That person could easily get into private data through your network, or simply piggy back onto your Internet connection for a free ride.
If you click on the Network icon in your Finder window, it will tell you the names of all the computers connected together on the local subnet. However, an intruder need not network with the other machines in your system to take advantage of your Internet connection. For example, I have 2 Macs using the Net via my base station. They are not necessarily connected to each other. I can use the Net with both machines at once, but until I actually use Network to connect them together I can't access one machine from another, and I can't see whether or not my other machine is using the Network or not.
On top of that, I have to have Personal File Sharing turned on to share files between 2 machines. You can change these settings in Sharing under System Preferences. That can keep intruders out of your system, but may not tell you who is logged into your subnet unless they Network, or if they have file sharing turned off on their system.
I'm not sure if there is a way to see if you have any freeloaders via an IP address.
Theala -
Newbie Repository question: How to add extra columns to relationship table?
I've defined the following item-descriptors:
<item-descriptor name="award" display-property="id">
<table name="bc_award" type="primary" id-column-name="award_id>
</table>
</item-descriptor>
<item-descriptor name="product" display-property="displayName" xml-combine="append">
<table name="bc_product" type="auxiliary" id-column-name="product_id">
</table>
Now products and awards have a many-to-many relationship, so I also added the following under the product item-descriptor definition:
<table name="bc_prd_awards" type="multi" id-column-name="product_id">
<property name="awards" data-type="set" component-item-type="award" column-name="award-id"/>
</table>
So far, so good. However, I actually want some extra information on the relationship table. Namely, the catalog to which the product-award association applies. In other words, I'd like the create table statement to turn out something like this:
CREATE_TABLE bc_prd_awards (
product_id varchar2(254) NOT NULL REFERENCES dcs_product(product_id),
award_id varchar2(254) NOT NULL REFERENCES bc_award(award_id),
catalog_id varchar2(254) NOT NULL REFERENCES dcs_catalog(catalog_id),
PRIMARY KEY(product_id, award_id, catalog_id)
Any ideas as to how I accomplish this?
Edited by: user6200425 on Jul 1, 2011 1:04 PMIf you want to add catalog information to the product-award association, do this.
<item-descriptor name="product"/>
<table type=multi>
<property name="productAwardAssociation" component-item-type="productAward" data-type="set" />
</table>
</item-descriptor>
<item-descriptor name="productAward">
<property name="award" column-name="award" item-type="Award"/>
<property name="catalog" column-name="catalog" item-type="Catalog"/>
</item-descriptor>
<item-descriptor name="Award">
--- award related properties
</item-descriptor>
Hope this helps.
Thanks
karthik
Maybe you are looking for
-
Open Photoshop 3 files and convert to TIFF or JPEG --- on the cheap!
Hello, I have about a hundred large scans in PS3 format on DVD. I never use PS or other pro photo SW; only iPhoto. My last PS is v7. I run the latest Snow Leopard on my new MBP 17 iCore7. All I want is to recover these files and convert them to the h
-
How can I recover X11 app missing by mistake in my new mac??
I 'd like to work with windows office ,but I can`t be cause of I`ve missed X11 app from my computer;MAC O SX 10.7.3.When I try to install windows office for MAC my computer gives an message you can´t set up windows becausu X11 is not in your comput
-
hi i,m a beginnner how can i run my own java class into a JSP file? please help me! thanks
-
Loading data and printing it out in graphic mode(is it possible)
if you are in graphic mode and you have a nice back ground and loader and stuff is it possible to load a pile and post it on screen? i want to know and if u can post a little code i also use netbeam so if its possible it would be easy here is a worki
-
It CHAINS OF CHARACTERS MAY REPLACE THE WORD DOCUMENT BY USING THE PACKAGE OF ORACLE XML? For example, in a text like this: Earmark. License # # Client to exercise his office. Characters # should be replaced with data from tables. One example please.