Newbie with problems opening an IPD file

Hi everyone, I hope someone can help me asap please.........
I made a back up on my desktop manager in the usual way and everything was fine. I then went onto my PC to try and open the blackberry backup IPD file. I right clicked on the blackberry file and clicked....." open with" and stupidly clicked paint. Somehow this changed all my blackberry back up files to paint files.
All I desperately want to know is.........
When I right click on the blackberry file on my pc and open the properties tab, in the general section the type of file shows IPD file, but underneath it shows Opens with: what should this show please?
I have tried making another backup but each time it saves it to my pc it shows as an IPD file opening with Paint!!!
Any ideas anyone??? Any help would be greatly appreciated. Thank you

You won't be able to show the content of an IPD file from your desktop directly. There is an application called ABC Amber BlackBerry Converter which can help you in getting the data. You can find the application from the below link -
http://abc-amber-blackberry-converter.en.softonic.com/
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

Newbie with problems opening RAW files.

I am new to using RAW files. I started by following the instructions to download and install the new RAW plug-in for my CS2 version of photoshop. When I open CS2 and choose bridge, I can see the thumbnail of the NEF file, but when I right click to open, there is no option for me to open as RAW file. If I double left click to open it tells me it cannot open because it is the wrong type of file.
Photoshop CS2 Ver 9.0
Raw Plug-in Ver 3.7
Camera Nikon D5000

Unfortunately, ACR (Adobe Camera Raw) 3.7 doesn't support RAW files from Nikon D5000.
Support for Nikon D5000 RAW was added in ACR 5.4. But, again, sorry to say you cannot install ACR5.4 for Photoshop CS2.
Your best bet is to try a DNG converter that you can find in your Nikon Camera Applications CD and convert your pictures.
You can also download ViewNX from here: http://www.nikonusa.com/en/Nikon-Products/Product/Imaging-Software/NVNX/ViewNX.html#tab-Pr oductDetail-ProductTabs-Overview

Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra

I am using PSE 9. I had no problem opening my Raw files from my Canon Rebel XT Now I have a Rebel 5ti and pse 9 won't reconize the Cr2 files

I am using PSE 9. I had no problem opening my Raw files from my Canon Rebel XT Now I have a Rebel 5ti and pse 9 won't reconize the Cr2 files

See this faq:
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
That will explain why each new camera model uses its own raw format. (.CR2 does not indicate a format, only a Canon family of formats).
The first link tells you what version of camera raw is needed for your camera : https://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
You need ACR 7.4
The second link tells you which ACR versions are supported by Elements versions Camera Raw-compatible Adobe applications
PSE9 supports version 6.5
Further down on that paper, you get links to download the free Adobe DNGconverter for Mac or Win.
This standalone software can batch convert a whole folder of raw files to the DNG raw file format that your present PSE9 can read.
Otherwise, you would have to upgrade to version 10 or later.

I'm having problems opening my pdf files. I'm running windows XP and have adobe reader XI (11.0.06)

I'm having problems opening my pdf files. I'm running wiondows Xp and have adobe reader XI(11.0.06) installed.

What kind of problems? What happens when you try? Any error messages?

Lightroom 1.4 - problem opening up NEF files

Hi there,
I've been having problems opening up NEF files in Lightroom 1.4, a message keeps coming up saying that the file is not recognised. I'm using a MacBook Pro and can't get a solution - can someone please advise on the best course of action?
Thanks!

>a Nikon D3
I don't think that one is supported in LR 1.4. The camera was released after LR 1.4 was released. To get support for that camera, either upgrade to LR 2 or convert the NEF files to dng using the free DNG converter that you can download from http://www.adobe.com/products/dng/

Problems opening a mov file on quicktime

Hey guys, i just purchased a mac and im having some problems opening a MOV. file on quicktime. FOr some reason im just getting sound and no video. Can anyone please help me out? Is there some extensions i have to download? Please let me know thanks.

A MOV. file can be anything.
I would suggest you download and install Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.

NEWBIE PLEASE HELP..!! Problem Opening a MIDI file

Hi all.
Does anyone have any advice on this strange problem..??? On the Logic Pro 8 Manual it says that : +"When you open a MIDI file in Logic Pro 8, software instrument tracks are automatically created for each MIDI track"+
My problem is that when I open a MIDI file, (Standard MIDI file) some tracks get assigned to external MIDI instruments, others get assigned to Software instruments. I can't figure out how this might happen.
I really want to use the software instruments for each MIDI track, not the Quicktime Synthesizer...
PLEASE HELP ME FIX THIS...!!!!
Thanks

Well, the thing is that I only want Logic to automatically create the software instruments tracks (EXS, EXS24, Garageband sounds, etc) every time I open a MIDI file
As a matter of fact I have a Macbook with 10.4 OSX with Logic Pro 8 and this one DOES what it says in the manual (creating the W/W instrument tracks) I just open a MIDI file and the program does all the rest..it assigns a SW instrument for each track... However, I can't do that with my iMac....
This problem is really driving me insane ....I'm a switcher from Cakewalk SONAR and I really want to use Logic....Please Help..!!

Problems opening & resaving NEF files with CS3/CS2

I seem to be having problems sending my NEF files to Photoshop from Aperture. This started happening just today & I'm not sure what to do.
What happens is that when I open a NEF file in external editor, instead of just opening up as a psd file in CS3 or CS2 directly like it used to do, it now opens Adobe Raw instead which means that I am unable to resave back into my Aperture Library. Is there anyone who has experienced this as well? Any suggetions as to the cause and a solution? I tried checking preferences for both Aperture as well as Photoshop but nothing seems to work.
The only thing I can think of is having just updated Adobe Raw to the latest version, 4.3 I think. Other than that Aperture did start up about a week ago & declared my library corrupt & proceeded to rebuild my library. Other than that it was behaving normally until today. Its really irritating & counter productive to be unable to resave my edits in Aperture.
Any help or suggestions will be very welcome indeed. Thanks in advance.

Thanks for the tip Eduardo, but I checked the preferences and they seem to be correct.
It seems that only images in certain projects were affected. Could be the ones that Aperture rebuilt earlier. I guess I may have to try exporting the raw files from the affected projects, then deleting and reimporting the projects again. I did try to rebuild the thumbnails but it doesn't seem to help.
Does anyone have any other suggestions for me to try before I do this?

Problem opening D700 nef files with ACR 4.6

Hi there,
I am running PS CS3 on a Mac with OS 4.11. I have just down loaded the beta version of adobe camera raw 4.6 - normally I don't down load betas but I am desperate to work on my D700 files in PS CS3. And I still can't open the RAW files...ACR 4.6 won't recognize the 'NEFs'...I have followed the instructions about replacing the plug in as per the release notes. Yet I still can't open the files. I love PS, please help.
Thanks,
Sean

Ok I went to the location and found this:
mac/library/application support/adobe/plug-ins/cs3/file formats/dng_cameraraw_4-6_091708.dmg
It turns out that it was here all along - I put in camera raw as two words and not one when I asked the finder and I put the exact name of the camera raw update so you can see it.
I must still be doing something wrong as its still not reading the NEFs from either my Nikon D700 or the NEFs from a D200 that I had before I switched to the D700.
I will go and check the path again - I do not know what else to do.

Problems opening & printing pdf files created on a Mac

I am at my wit's end! I recently upgraded to a new version of Acrobat and suddenly a lot of my clients could no longer open my pdf files. I uninstalled the latest version of Acrobat and reinstalled an older version (Acrobat 8.1.3). Some clients started being able to open my pdf files but others could not. So I started using the Acrobat Share server and sending links. Some of my clients cannot open those either and many cannot print even if they can open the files that way. I personally also cannot print from the Acrobat Share server. The pdf files print out with all the surrounding graphics and application design elements. I also can't open the pdf files that I created on my Mac using my PC laptop running Vista. I have tried opening and printing both pdf files and the Acrobat Share links from my Mac and my PC laptop running Vista, to no avail.
I was under the impression that compatibility problems between Macs and PCs were largely a thing of the past. I was also under the impression that the whole point of exchanging pdf files was that pdf files are cross-platform compatible. Not only am I am losing tons of valuable time, I may be losing credibility with my clients (especially since I have an IT background). I desperately need to know what version of Acrobat I should be running on my Mac so that when I scan documents into my Mac, the pdf files that are created are completely 100% compatible with both Mac and PC operating systems regardless of what operating system and what version of Acrobat my clients are running. I also need to be sure that those same pdf files I create on my Mac can be seemlessly printed out from either a Mac or PC regardless of the operating system or Acrobat Reader version. If anyone can help me get to the bottom of this, I will be eternally grateful. Thanks.

This file downloaded and works fine for me in Preview on both OS X 10.5.7 and 10.4.11 (and opens in Acrobat Pro 9.1.1 and 8.1.5, and the latest version of Reader on both versions of the OS). As expected.
If you're printing from Acrobat.com by right clicking in the image area and selecting Print, don't. This isn't printing the PDF, it's printing the Flash frame that contains, as you've noticed, buttons and other elements. (Adobe's Mac Flash plugin is notoriously buggy.) Direct your clients to download the file by selecting the download button, not by right clicking and printing.
Again, your PDF file is fine.

Problems opening up RAW files in the Adobe elements 12 editor

I just installed Elements12 on my Windows Desktop.
Operating System Windows XP SP3, Quad Core Processor 2.4GhZ, 3Gb RAM (based on these spec, I should be meeting minimum system requirements)
My camera's RAW format (Rebel 4Ti, CR2) is supported by the installed Camera RAW version (8.0.0.xx).
I had no problems opening up the RAW file into Camera Raw. I performed the basic adjustments and save the image as a .DNG file. No problems so far.
(1) I then tried to open the RAW file into the Elements Editor by clicking on "OPEN Image" in Camera RAW. I goes the error message that this action could not be completed due to a program error.
(2) I also tried to open the .DNG file directly. I got an error message telling me I had not enough RAM to complete this action (see above, I have 3Gb installed)
Can anybody advise me what to do, or what the problem is>
Thanks.

You might start looking for a new computer with windows 7 or 8 64 bit.
Not because windows xp is a bad operating system, but it's not supported by microsoft any longer and more and more software companies are dropping support for xp.
(even one of my favorite open source programs; Krita, dropped support for windows xp)
Plus, new programs seem to be more and more ram hungry and a 64 bit version of windows can make a world of difference.

Problems opening CS2 ai files in CS4 under Snow Lep op system

I am finding I can't open files created in CS2 with CS4. I didn't have any problem on the PC but on the Mac the files won't open. The operating system is Snow Lepoard. Anyone have any ideas as why this is happening? They are 165 mb files but I never had any problems on the PC so my guess is it is the new Mac op.

I feel like they'll work. Worst case, maybe I can pay someone a few bucks to throw them into AI and change to compatibility mode if I have any problems.
I did work with an artist's CS4 files when I was on CS2 and the only thing it seemed to do was add a couple of weird paths. So if you selected all the items in a piece of vector art and it set the frame around it to show the selection, it would include an area of white space, normally below the artwork because there was some random point down there -- deleting it solved that problem... Hopefully it's the worst thing that will happen.
Thanks for your help!!
-Kristie

Problem opening 40D RAW files

I have installed CS3 Extended and then downloaded and installed Camera RAW 4.2. In CS3 in the Help / about plug-ins option, Camera RAW 4.2 is named. I have also opened CS3 with the ctrl key depressed and cleared the cache / reset preferences.
I have CS3 installed on d: (d:\program files\adobe\... )
and Camera Raw.8bi is installed in
d:\program files\common files\adobe\plug-ins\cs3\file formats\
(This is the version from 29/08/07 10136kB)
In bridge I can see thumbnails of 350D files but not 40D files and I can't open the 40D files in Camera Raw (on the 350D files I can right click and "open in Camera Raw..."
The 40D files are the full size RAW at 9-14Mb rather than sRAW files.
I don't know where to go next to try to get the 40D files recognised. Any suggestions anyone?
Thanks

If it works on a Mac it must work on a PC...right Ab? (-;
I tried the 40d raws on my laptop and all is well so there must be a problem with ACR on my desktop. I have seen a few messages in that regard so will proceed down that path.
Thanks for motivating me to check further on my end Ab.
Jerry

Problem opening PDF/A files

Hi,
it's the first time I meet PDF/A files and I have some problems opening these files. I use Adobe Reader 9.3.4 with the last updates, but when I try to open a PDF/A file I have this screen (sorry, but it's in italian).
Thanks in advance if someone can help me.

Reinstall Adobe Reader.
http://www.adobe.com/support/downloads/product.jsp?platform=macintosh&product=10

Newbie with problems opening an IPD file

Similar Messages

Maybe you are looking for