Newbie with specific application -needs help

I own this website www.artevinowinery.com (in development). I
am trying to make the bottle on the left be an interractive tool
where mousing over it will call up the choices for the type of
product in a new window, then clicking on that choice will change
the master image and store their choice in a database for future
"checkout". I also want them to be able to upload their own image
for the label part of the design and move it around the bottle then
record the X,Y positions so we can make the bottle for them. I am
not a programmer. Any suggested referrences I can use to get this
done in the next 6-8months?

Similar Messages

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Blue boxes with question marks, Need help

In safari i am constantly getting blue boxes with question marks in them, replacing images.
These boxes are showing up on tumblr, forums, facebook and other places.
I need help fixing it please.

Thoseboxes mens it can't decipher the format, might try
Perian...
http://perian.org/
Perian enables QuickTime application support for additional media:
          •          File formats: AVI, DIVX, FLV, MKV, GVI, VP6, and VFW
          •          Video types: MS-MPEG4 v1 & v2, DivX, 3ivx, H.264, Sorenson H.263, FLV/Sorenson Spark, FSV1, VP6, H263i, VP3, HuffYUV, FFVHuff, MPEG1 & MPEG2 Video, Fraps, Snow, NuppelVideo, Techsmith Screen Capture, DosBox Capture
          •          Audio types: Windows Media Audio v1 & v2, Flash ADPCM, Xiph Vorbis (in Matroska), and MPEG Layer I & II Audio, True Audio, DTS Coherent Acoustics, Nellymoser ASAO
          •          AVI support for AAC, AC3 Audio, H.264, MPEG4, VBR MP3 and more
          •          Subtitle support for SSA/***, SRT, SAMI
Never heard of those sites though, so no idea what they use.

My first Mac and first experience with iPhoto. Need help

Hello everyone. I just purchased my first Mac, a Mini, last week and I'm trying to learn how iPhoto works. I've been able to import picturs from my NAS (network attached storage) drive which holds all our photos, music and videos.
However, when I took pictures over the weekend, I wanted to put them on the NAS as well and have them automatically import into iPhoto. I like that iPhoto lets you put a description about the pictures, but I can't find a way to type a description and then set iPhoto to save the pictures to my NAS drive.
I ended up just saving them to the NAS drive and then importing again and telling iPhoto to not import duplicates. The problem with that is I get folders called thumbnails and then I get messages telling me the Thumbs.db files are not readable and those are coming from my camera card or the NAS drive, maybe because it was formatted on a PC. I know Thumbs is a PC item.
With my old PC, it allowed me to pick where I wanted my photos stored and what name I would like to call the pictures and then it named them all in succession automatically. Will iPhoto do this and if so, how do I do that? And how do I enter descriptions about my old photos to make them easier to find during a search?
Thanks for the help. While the Mac is very similar to my old PC, there sure are a lot of things I'm unfamiliar with. But with time and some help from experts like you, I'm sure I'll get comfortable with it.
John

John
iPhoto is a photo organiser - that is a database. Like any database the data has to be imported into the application.
What format is that NAS? iPhoto does not sit happily on disks that are not formatted for Mac OS X (journalled). You will find issues with saving changes to the db and with sharing pics among other apps.
You can put a library on an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
With my old PC, it allowed me to pick where I wanted my photos stored and what name I would like to call the pictures and then it named them all in succession automatically. Will iPhoto do t
No. For a start, filenames have no relevance in iPhoto - it's all about visual organisation. You can attach titles, keywords and comments to pics, of course, and can add them to the File on export.
If you want to set the pics in a spot, then do that with the Finder and thereafter import them. You can use a batch file renamer such as FileList to rename the files prior to import.
and telling iPhoto to not import duplicates.
Using a Referenced rather than a Managed library means that iPhoto will not copy the files, but rather simply reference them on your HD. It will create an alias to the Original file, a thumbnail and, if you modify the pics, a Modified version.
However, you need to be aware of a number of potential pitfalls using this system.
1. Import and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
As a general comment: iPhoto is a bit different from most photo apps. It's happiest when it manages the files and lets you go on to manage your Photos. That's a key distinction though, between Files and Pictures. iPhoto is about Pictures, not Files.
You do all your work in the iPhoto Window - there is never a need to go into the Photo Library on the Hard Disk. To find and access photos:
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To use an external editor
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
By all means post again if you need more info.
Regards
TD

Bought a used iMac G5 with no OS - Need Help!

Hello,
I recently bought an iMac G5. Specs:
1.8 GHz, 1024 mb, 80 GB, CD-RW, DVD-RW
Has keyboard and mouse
but it has no operating system installed. I was hoping I might be able to install OS X 10.4.11 from my old macbook, however I don't know enough about computers to figure this out.
Can anyone give me some direction? Do I need to buy a new OS? If so, which one? Do you know of a good place to get a decent deal on it?
Thank you for any help you can give me!

I'm afraid install discs are machine specific, you need to contact Apple and get the install discs for your iMac - 800-767-2775 and they'll send them to you for a modest fee. You can also try using a retail version of Tiger, which has a black label. Anything with a grey label is machine specific and won't work.

BB Desktop Manager no longer works with Mac Maverick - Need Help Urgently

I have been a loyal Blackberry user since the Government of Canada officially began using these cell phones. I feel, however, abandoned by Blackberry (they obviously don't believe that it is easier to retain an existing customer than acquire a new one). I'm using a Blackberry Bold (9900) with a Macbook Pro. Everything was fine until I upgraded my Mac operating system to Maverick; my Blackberry Desktop Manager no longer works, so I cannot sync the content (contacts, calendar) of my phone with my Mac, but that's not the worst of it.
I recently had a momentary lapse and exceeded the 10 password attempts to access my phone... this accidentally wiped my phone clean... and because Desktop Manager does not work with Mac, I do not have a way to recover my data. Rogers was of no help and had Blackberry updated its desktop software months ago, as it should have, this issue would have been moot. I do not know how or why, but I was able to recover most of my data, but I'm not sure just how up-to-date tha data is and am still going through it, but I'm having issues with some functionality.
I'm in the US for several months and have suspended my Canadian services. Prior to the wipe, I was able to use wifi on my phone to send and receive emails with no problem. After the wipe, I can't send emails or bbms. I checked my blackberry internet service and all email accounts are good to go. BBMs are another issue. I need help. Suggestions please.

Apple has ceased synchronization with Mavericks. The issue lies with Apple, not with the desktop software. To mitigate the lack of sync capabilities in Mavericks you can sync your contacts and calender on your Mac with the usual suspects (Yahoo, Google). Create a backup (archive) for Contacts and Calender on your Mac first, then create one of those email accouonts that allow syncing. On your 9900 and with BlackBerry provisioning enabled create the new or existing email account. See which email accounts can sync with BB, I know Yahoo is working fine. For Yahoo, get the Yahoo Calender sync (a few bucks one-off payment required), Contacts sync works off the shelf within BB. If you reset the 9900 you should be able to restore all data with BB DTM. Please note that emails you received during the 9900 reset and the date of restore will not be available on the device. You will still not be able to sync contacts/calender over BB DTM. I hope that helps.
BlackBerry Bold 9900, Blackberry Z10 and BlackBerry PlayBook.

Serious Issue with Linkage..Need help ASAP!

OK, I have big deadline for Monday and I can't figure this
out. I have a bunch of movieclips that are set up with linkage for
actionscript and set to export in first frame. Everything was fine
and dandy for a week. Now all of a sudden Flash hangs when I try to
export the swf. If I turn off the export in first frame everything
is fine. The problem then is that my move clips aren't available
for the attachmovie call. What I don't understand is why it was
fine, then all of a sudden this happened for no apparent reason.
Has anyone got a workaround or solution for this? I need help with
this ASAP. Thanks.
--Paul

Sadly nothing you can do. The file must be corrupted.
sometimes files that need saving corrupt themselves (product of
voltage variations or some other physical things) making some
objects "BAD", maybe you can save your work if you determine what
is the only object that is corrupting all the file and delete and
and redraw it.

Problems with exporting. Need help fast

So I recorded some video game footage (Battlefield 4) and when I look at the raw file, it says it's 1920x1080. I edited it and finished it and even if I look in info it says that it's 1920x1080.
But when I try to export the video it says that the source file is 1280x1080
So when I export it, it is in REALLY bad quality and I usually upload high quality videos! What do I do? I need help, fast! I have Adobe Premiere Pro CS6.
I have a i7 3770k CPU so I don't think that is an issue. 8GB of ram aswell.

Quickest way:
Get Started with Premiere Pro
New to Premiere Pro? Get started with your first project — editing a video. In less than an hour, you'll learn to edit together different types of media to tell a video story.

I just got a iPhone 5S and I forgot my passcode. I don't have Find my Iphone or icloud and my phone isnt synced with itunes, i need help.

I just got a IPhone 5S and I forgot my passcode. I'm stuck on the disabled part. I don't have Find My IPhone or iCloud and my phone isn't synced with iTunes, I really need help.

Hi Numento,
Follow the instructions in this support article for "If you have never synced your device with iTunes....":
http://support.apple.com/kb/HT1212
Cheers and good luck!
GB

Newbie to Java who needs help..

Hello all.
I am having some troubles making a random walker/Drunkard. What I have to do is make it that the user inputs the starting X, Y coordinates and the amount of steps he has to walk. After that, it is post to print back the new coordinates he walked to and the distance of his new coordinates is to the starting one. I am new to java so I am confused.. This is what I have so far..
import java.util.*;
public class Drunkard {
    private int x;
    private int y;
    private int numSteps;
    private int Distance;
    private int moveDrunk;
    public Drunkard() {
        this.x = x;
        this.y = y;
        this.numSteps = 0;
    public int getX() {
        return x;
    public int getY() {
        return y;
     public int getSteps() {
        return this.numSteps;
    private void move(int numSteps);
    private void moveDrunk(){
    moveDrunk = (int) (Math.random() * 4);
    public int getmoveDrunk() {
        return moveDrunk;
public boolean getDistance{
(int)(Math.sqrt((getX()*getX()) + (getY()*getY())));{
return Distance
import java.util.Scanner;
public class DrunkardSimulator
    public static void main (String[] args)
        Scanner scan = new Scanner(System.in);
        System.out.print ("Enter the number of steps: ");
        numSteps = scan.nextInt();
        System.out.print ("Enter the starting x coordinate: ");
        x = scan.nextInt();
        System.out.print ("Enter the starting y coordinate: ");
        y = scan.nextInt();
        Drunkard drunk = new Drunkard();
        System.out.println("The drunk moved to X" +drunk.getX() + ", y " + drunk.getY() && "a distance of " + drunk.getDistance());
}Any help would be nice.
Edited by: orlfman on Apr 9, 2008 5:26 PM

Sorry. I should have stated what I need help with..
I need help with making him move randomly when the user types in the x,y starting coords, and the amount of steps he has to walk from what the user inputs. I also need help printing out the new x,y coords he walked to randomly and the distance his new coords are from where he first started at (the coords the user the typed in.)
I have two files:
Drunkard.java
import java.awt.*;
import java.util.*;
public class Drunkard {
    private int x;
    private int y;
    private int numSteps;
    private int Distance;
    private int moveDrunk;
    public Drunkard(int x, int y) {
        this.x = x;
        this.y = y;
        this.numSteps = 0;
    public int getX() {
        return x;
    public int getY() {
        return y;
     public int getSteps() {
        return this.numSteps;
    public void moveDrunk(int numSteps){
         for (int i=0;i<numSteps;i++) {
        if(rand.nextInt(2)==1) { x+=1; } else { y+=1; } }
    public int getDistance(){
(int)(Math.sqrt((getX()*getX()) + (getY()*getY())));{
return Distance
}And DrunkardSimulator.java
import java.util.Scanner;
public class DrunkardSimulator
    public static void main (String[] args)
int x;
int y;
int numSteps;
        Scanner scan = new Scanner(System.in);
        System.out.print ("Enter the number of steps: ");
        numSteps = scan.nextInt();
        System.out.print ("Enter the starting x coordinate: ");
        x = scan.nextInt();
        System.out.print ("Enter the starting y coordinate: ");
        y = scan.nextInt();
        Drunkard drunk = new Drunkard(x,y);
        drunk.moveDrunk(5); //5 steps
        System.out.println("The drunk moved to X,Y" + drunk.getX() + drunk.getY() + drunk.getDistance());
}Edited by: orlfman on Apr 10, 2008 12:29 AM
Edited by: orlfman on Apr 10, 2008 12:31 AM

2 issues with my phone need help !!

I am having problems with my app store, when I am downloading an app it is always stuck on 92% that's 1 issue, my second issue is my messages when I send a message it keeps saying sending I don't know why. I need help with these 2 issues Please & Thank You

What phone?

Problems with some fonts, need help!

Hi everyone,
Recently I need to create some documents in Pages and I found some problems with some of the fonts. Apparently some fonts when the font size is increased the spacing between characters gets reduced and ooks very weird.
http://img109.imageshack.us/i/screencapturem.png/
I've tried all type of configs in pages and i'm really clueless what this is.
Can anyone please give me some pointers?
Thank you in advanced,
Prismer

This leaves several files instaled. Among them are the preferences files. If you re-install with existing preferences files, these one aren't replaced by new, clean, ones.
Right, uninstalling the application does not necessarily uninstall its preferences. (Indeed, previous InDesign and QuarkXPress betas had the problem that they preserved the older preferences when the newer betas were installed which could lead to crashes.)
Arguably, system software has to have smart install / uninstall so that all the files installed by an application are removed, but then what about fonts and / or profiles installed with the application, which some other application may be using as a resource.
I don't know, but the word 'simple' and the word 'software' don't seem ever to be synonyms .
/hh

Guys i just deleted a very important back up of my iphone 5 on itunes on a mac book pro and it wasnt backed up with i tunes need help to get it back 911

guys i need help please

How do u get points
You can get points when you answer peoples questions. The person asking the question awards the points as they deem appropriate. You can't awared points to yourself. Points aren't worth anything.

Any idea on Integrating mentioned application with OIM 11g :Need Help

Hi,
I wanted to integrated below target application to OIM11g. (to manage user life cycle, we also have role management(OIA))
The 7 applications have their own repository, e.g SIPORT uses oracle database tables, PBX uses ms-sql, Lync is AD and other uses file. Employees will need to be provisioned into these application repositories via OIM connectors to provide them with access.
Any approach/help/question would be appreciated.
OfficeNet
SIPORT
MediaTechnology (Gingco)
PBX
Lync
Campus App
Sicherheitsleitzentrale
Edited by: IgnitedMind on Apr 22, 2013 8:00 AM

We are trying to achieve "single sign-on" to windows workstation and then to oracle database in the following way:
- user logs in to his WinXP workstation through Active Directory
- user connects to Oracle 10.2 database (SQL*Plus as " conn / ") without having to type his database password and the user is authenticated by Oracle Internet Directory (user is created in the database as identified globally)
Can we achieve this if AD is integrated with OID and the user's password is the same in both directories?
OID is configured for "password authentication", not for SSL/Kerberos.
Thanks!

Application crashes with UAC enabled (Need help bad)

I have an application that installs a service configured to run with the Local System account.
The application never prompts me for UAC but it crashes if the following is true
1. UAC is enabled
2. Service is configured to run using local system account
Workarounds:
Disabled UAC (not an option for me) or change the service to run using a service account (possible)
Beside setting up a service account does anybody know how I can get around my issue with UAC?
Thanks!!

Please be courteous enough to provide the exact name and version of the application causing this. It is absolutely impossible to suggest possible actions without the name and version of the application.
Have you contacted the publisher/vendor of the application about this? The publisher/vendor has sole responsibility for support of their products and to ensure they run properly in the Windows 7 environment.
Some applications require that the installation setup program be run As Administrator, but this is information you would have to acquire from the publisher/vendor of the application.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Newbie with specific application -needs help

Similar Messages

Maybe you are looking for