Newby: locking the table on a SELECT?

I have just downloaded SQL developer and have been using it to look at the back end of my work database, but it seems just as I started browsing through tables (by clicking on them in the tree explorer) people started getting kicked out of their front end applications. When I stopped, they stopped getting kicked out. Does my viewing a table lock that table? I have tried also through select tables, and I am not sure about whether it leaves the transaction open and locks the table, or not? Also, because of this I am unsure about the commit button (since it removes all the data when pressed). Can someone please enlighten me. thanks

Along the same line as the database connection limit:
If you are logged in as the same username as the other users, you could be hitting a limit on the username that you are logged in with.
To find the limits specified for a user:
SELECT * FROM sys.dba_profiles where resource_type != 'PASSWORD' AND profile in (select profile from all_users where username = :username) ORDER BY profile;
The most likely value above to check is 'SESSIONS_PER_USER'
There are other possibilities aside from specific user limits, so you may want to check with your dba to find out what you are running up against. The only other thing that I can think of is open cursor limits since I believe that viewing a table opens a cursor.
Eric

Similar Messages

Lock the table by user with grant only for select

Hallo.
It is possible that the user has rights only for SELECT, do not lock the table? Now, where do "SELECT * FROM table FOR UPDATE", does not make the change, but it locks the entire table, and another user to get into it.
Thanks

And here is the "evidence" ;)
SQL> select * from v$version ;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> create user u1 identified by u1 ;
User created.
SQL> grant connect to u1 ;
Grant succeeded.
SQL> connect hr/hr
Connected.
SQL> create or replace view v_t1 as select username, user_id, created from t1 group by username, use
r_id, created with read only ;
View created.
SQL> grant select on v_t1 to u1 ;
Grant succeeded.
SQL> connect u1/u1
Connected.
SQL> select * from hr.v_t1 where rownum = 1 for update ;
select * from hr.v_t1 where rownum = 1 for update
ERROR at line 1:
ORA-02014: cannot select FOR UPDATE from view with DISTINCT, GROUP BY, etc.
SQL> select * from hr.v_t1 where rownum = 1
2 ;
USERNAME                          USER_ID CREATED
AK                                     36 08-MAY-00

To lock the output of a SELECT query

Hi,
I want to lock the output of a SELECT query to some transaction.
I have wriiten it as follows , the output of the query is a single row;
SELECT empname
FROM employees
where empid = 100
FOR UPDATE;
Specifying only FOR UPDATE is proper or do i need to specify some more clause ??
Thanks.

bscalzo wrote:
You can also specify the columns to lock if you like:
select x, y, z from aaa where x = 1 for update of x, y;
But the locking is still currently only done at the row level - but who knows what the future might offer. May not hurt to have the columns named for thay day when the syntax and engine sync up :)It might be worth to amend that specifying the columns is already particularly relevant if you select from multiple tables/views in order to specify which rows of which table/view to lock.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Lock Object (Not locking the table)

Hi Guys
I have a custom table ZDRAD same like standard table DRAD with an additional 'DATE' field . ZDRAD's Key fields are same like DRAD . I have created a lock object 'EZDRAD' where I put name = 'ZDRAD' (Custom table) and mode = 'EXCLUSIVE CUMULATIVE' . Now I want to lock the table(Whole table) before modifying/Inserting/deleting the records in se38. Please check the code below and suggest me if I am passing wrong values to the lock object Function module.
Code
TABLES : ZDRAD.
CALL FUNCTION 'ENQUEUE_EZDRAD'
EXPORTING
 MODE_ZDRAD = 'E'
 MANDT = SY-MANDT
 DOKAR = ' '
 DOKNR = ' '
 DOKVR = ' '
 DOKTL = ' '
 DOKOB = ' '
 OBZAE = 0
 OBJKY = ' '
 X_DOKAR = ' '
 X_DOKNR = ' '
 X_DOKVR = ' '
 X_DOKTL = ' '
 X_DOKOB = ' '
 X_OBZAE = ' '
 X_OBJKY = ' '
 _SCOPE = '2'
 _WAIT = 'X'
 _COLLECT = ' '
EXCEPTIONS
 FOREIGN_LOCK = 1
 SYSTEM_FAILURE = 2
 OTHERS = 3
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
IF SY-SUBRC = 0.
ZDRAD table is locked.
 P_L_LOCK_STAT = 'X'.
 EXIT.
ELSE.
ZDRAD table is not locked
 CLEAR P_L_LOCK_STAT .
ENDIF.

Hi Kanthimathi
That is numeric field . Please suggest me how can i check the lock.

Problem related to locking the table

Hi all,
i am facing a problem while applying locks on the oracle table.my intention is stop the accessing of table to other users, if the table is locked by one user.
for this i wrote the code as follows
Class.forName("oracle.jdbc.driver.OracleDriver"); con = DriverManager.getConnection("jdbc:oracle:thin:@192.168.2.123:1521:xe", "root", "paridb"); con.setAutoCommit(false); System.out.println("Successfully connected to " + "Oracle server using TCP/IP..."); String lock="lock table report@xe in exclusive mode";-------------------------------------->1 query to lock the table Statement stmt1=con.createStatement(); stmt1.executeUpdate(lock); System.out.println("lock is applied"); Statement stmt=con.createStatement(); for(int i=0;i<6;i++) { sql="insert into report values(1921682123,'device','host')"; stmt.executeUpdate(sql); }
after locking i inserted some data into table, after insertion i am not commiting it because if i commit,the lock will be release.next i am trying to insert data into that table from another system,acutually the data don't insert.but data is inserted. how it is happening like that ??
in another scenario, if execute the locking query on the database directly then trying to insert into database through java application, at that time it is not giving permission to access table.
plz guide me
thanks&regards,
nagaraju

Hi! Thank you so much for your reply. Yes, I´m using ADF. I attach you the iterator´definition from the page definition:
<iterator id="MovimientosCtbView3Iterator" RangeSize="10"
Binds="MovimientosCtbView3" DataControl="AppModuleDataControl"/>
If I set the RangeSize to 11, the problem is solved, but my project manager want to find out why this situation happens with RangeSize=10.
Thank you so much and sorry for bothering you

Locking the table

Hi folks,
I am new to using Numbers, or any spreadsheet for that matter, so I'm pretty baffled.
I created a table to use in my lesson planning, as I found inserting a table into a Pages document didn't serve my purposes. The table looks great, but here's my problem:
I created a large area in the middle of the page in which to type text by merging a whole whack of cells. I did this as it seemed like the best way to create a large area but still maintain the integrity of the format of the page. The problem, however, is that I have no clue how to lock the table - to set the table so that none of the cells change size when I insert text. I have been typing in the text, and the cell keeps expanding, and I have no idea why - I haven't reached the "end" of the cell so I'm not sure why it's not just staying the same size.
I tried to read through the user guide, but I wasn't able to find what I'm looking for.
Thanks folks,
Shawn

Shawn,
Without knowing more about why you need a large text area in the middle of your table, it's a little difficult to suggest solutions. In general though, it's not a good idea to Merge Cells just for visual effect. Having affected all those rows and columns will cripple any future efforts to sort the table, or to add or delete rows and columns. You could Insert a Text Box and put your prose there. Position the text box anywhere you like - even over the middle of the table - without causing any future problems with the table.
Generally we want table cells to expand when we run out of room while making input. I assume that you already have turned on the Wrap feature in the Cells Inspector so that you get more than one line in the cell. You can begin with an oversize cell by dragging the borders of the labels. Beyond that, with Wrap turned on, Numbers will (as you have noticed) accommodate all your input by expanding the height of the cell.
Jerry

FM to lock the Table

Could anybody check and tell me whether Function Module ENQUEUE_E_TABLE
and DEQUEUE_E_TABLE are working fine and if it is so let me know the Parameters used for it.
Full reward points for issue solver.
Regards,
Amol

hi..
check out the following documentation
Lock objects are used to lock the database table while making the modifications on the database table.
you can create your own lock objects using SE11.
if you create lock objects on any table system will create two function modules.
1.ENQUEUE....
2.DEQUEUE.....
first one is used to lock the table
second one used to removing lock on the table.
lock Table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = table_name
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
Unlock Table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
tabname = table_name
check this link :
http://help.sap.com/saphelp_40b/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
_SCOPE = 1: The lock is not sent to the update program. The lock is removed when the transaction is ended.
_SCOPE = 2: The lock is sent to the update program. The update program is responsible for removing the lock. The dialog program which requested the lock no longer has an influence on the lock behavior. This is the standard setting for the ENQUEUE function module.
_SCOPE = 3: The lock
Re: lock objects
Managingin lock entries
http://help.sap.com/saphelp_nw04/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/f9813712f7434be10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/168237d30d974be10000009b38f8cf/frameset.htm
Reward points if useful
Regards
Ashu

How can we lock the table?? how can we lock the record

Hi
how can we lock the complete table?? how can we lock the record ?/
Thanks
Rama

Lock objects are used to lock the database table while making the modifications on the database table.
you can create your own lock objects using SE11.
if you create lock objects on any table system will create two function modules.
1.ENQUEUE....
2.DEQUEUE.....
first one is used to lock the table
second one used to removing lock on the table.
lock Table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = table_name
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
Unlock Table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
tabname = table_name
check this link :
http://help.sap.com/saphelp_40b/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
_SCOPE = 1: The lock is not sent to the update program. The lock is removed when the transaction is ended.
_SCOPE = 2: The lock is sent to the update program. The update program is responsible for removing the lock. The dialog program which requested the lock no longer has an influence on the lock behavior. This is the standard setting for the ENQUEUE function module.
_SCOPE = 3: The lock
Re: lock objects
Reward if this helps.

Is it Necessary to lock the table while accessing the entries from table

Hi Gurus,
While optimization of the Program i came through one type of coding is in inside the Loop of The internal table which is processing BDC call transcation through updating the Custom table.
Before processing the BDC, the Custom table has been locked and read the entries from same custom table ,if the process fails then it waits for another 20 seconds and retrying the same for another time .I could not able to understand the Logic behind this.if it is not the Correct way then i can straight away remove this Part which is very well improve the perfromance of the Object.
For Your Better Understanding i have attached the Snippet of the Code .Please find the Code and advice me the same .
+LOOP AT i_stk_req INTO wa_stk_req.+
+** Lock is set to '0',meaning that no lock exist.+
 ++v_lock = 0. "FALSE.++
++* Preparing variable key for locking.++
 ++CLEAR v_key.++
 ++v_key = sy-mandt.++
 ++v_key+3(3) = wa_stk_req-lgnum.++
 ++v_key+6(4) = wa_stk_req-werks.++
 ++v_key+10(18) = wa_stk_req-matnr.++
 ++v_key+28(10) = wa_stk_req-charg.++
++* Try to lock the row for max of 100 times.++
 ++DO 10 TIMES.++
++* this perform sends sy-subrc EQ 1. in case of foreign lock.++
 +PERFORM enqueue_tab IN PROGRAM saplsvix USING 'ZSDT_STK_REQ' v_key c_e c_e.+
 +IF sy-subrc EQ 0. "If Enqueue is successful.+
+** set lock as TRUE+
 ++v_lock = 1. "TRUE++
++* selecting the latest entry for the table(Entry might have changed-refer to++
 +SELECT SINGLE *+
 ++FROM zsdt_stk_req++
 ++INTO wa_stk_req++
 ++WHERE lgnum = wa_stk_req-lgnum++
 ++AND werks = wa_stk_req-werks++
 ++AND matnr = wa_stk_req-matnr++
 ++AND charg = wa_stk_req-charg.++
 ++IF sy-subrc NE 0. "Checking if select statement was successful++
++* Unlock the table row.++
 ++PERFORM enqueue_tab IN PROGRAM saplsvix USING c_table v_key c_e c_d.++
 ++v_lock = 0. "If unsuccessful.Then we set lock as FALSE.++
 ++EXIT.++
 ++ENDIF.++
 ++EXIT.++
++* If unsuccessful in locking then wait for 1 sec.++
 +ELSE.+
 +WAIT UP TO 20 SECONDS.+
 +ENDIF.+
+** exit from DO. ENDDO.+
 ++ENDDO.++
++* v_lock will be FALSE if all attempts for lock was unsuccessful or++
++* if there is a problem in select single after lock.++
 ++IF v_lock = 0.++
 ++NEW-PAGE.++
 ++CLEAR v_display.++
 ++CONCATENATE text-004 text-012 wa_stk_req-matnr text-011 wa_stk_req-werks++
 ++text-019 wa_stk_req-lgnum text-020 wa_stk_req-charg INTO v_display SEPARATED BY space.++
 ++WRITE :/ v_display.++
 ++ENDIF.++
++* Only to process if lock is successful.++
 ++CHECK v_lock NE 0.++
++* If UPDATE IS FALSE that means that no updates need to be done.++
++* So we set v_update as FALSE in its initial state.++
 ++v_update = 0.++
++* Begin of Insert Optima App - 053++
++SELECT lgnum++
 ++lqnum++
 ++matnr++
 ++werks++
 ++charg++
 ++lgtyp++
 ++meins++
 ++verme++
 ++lgort++
 ++qplos++
 ++bestq++
 ++FROM lqua++
 ++INTO TABLE i_lqua1++
 ++WHERE lgnum EQ wa_lqua-lgnum++
 ++AND matnr EQ wa_lqua-matnr++
 ++AND werks EQ wa_lqua-werks++
 ++AND charg EQ wa_lqua-charg++
 ++AND bestq EQ wa_lqua-bestq++
 ++AND lgort EQ wa_lqua-lgort++
 ++AND verme GE 0.++
++* End of Insert Optima App - 053++
++* IF a requirement still exists.++
 ++IF wa_stk_req-verme > 0.++
 ++LOOP AT i_lqua INTO wa_lqua WHERE bestq = 'Q'++
 ++AND qplos NE 0++
 ++AND lgnum = wa_stk_req-lgnum++
 ++AND werks = wa_stk_req-werks++
 ++AND matnr = wa_stk_req-matnr++
 ++AND charg = wa_stk_req-charg.++
 ++CLEAR v_target.++
 ++CHECK wa_stk_req-lgtyp = wa_lqua-lgtyp OR wa_stk_req-lgtyp IS INITIAL.++
++* checking if still some stock needs to be transported.++
 ++IF wa_stk_req-verme < 0.++
 ++EXIT.++
 ++ENDIF.++
++* we need to send the entire lot if the stock belongs to quality inspection++
 ++IF wa_stk_req-verme >= wa_lqua-verme.++
 ++IF wa_stk_req-lgort IS INITIAL.++
++* fetch the Storage location value from the two custom tables.++
 ++PERFORM f_fetch_lgort.++
 ++ELSE.++
 ++v_lgort = wa_stk_req-lgort.++
 ++ENDIF.++
++* checking if v_lgort is not initial.++
 ++CHECK NOT v_lgort IS INITIAL.++
++* Calling QAC2++
 ++PERFORM f_qac2.++
++* Checking if Post Good was successful.++
 +IF NOT wa_qamb-mblnr IS INITIAL.+
 +REFRESH i_lqua1.+
 +SELECT lgnum+
 +lqnum+
 +matnr+
 +werks+
 +charg+
 +lgtyp+
 +meins+
 +verme+
 +lgort+
 +qplos+
 +bestq+
 +FROM lqua+
 +INTO TABLE i_lqua1+
 +WHERE lgnum EQ wa_lqua-lgnum+
 +AND matnr EQ wa_lqua-matnr+
 +AND werks EQ wa_lqua-werks+
 +AND charg EQ wa_lqua-charg+
 +AND bestq EQ wa_lqua-bestq+
 +AND lgort EQ wa_lqua-lgort+
 +AND verme GE 0.+
 +SORT i_lqua1 BY lgtyp.+
 +CLEAR: wa_lqua1,+
 +v_position.+
 +READ TABLE i_lqua1 INTO wa_lqua1 WITH KEY lgtyp = wa_lqua-lgtyp.+
 +IF sy-subrc EQ 0.+
 +v_position = sy-tabix.+
 +ENDIF.+
 +SELECT SINGLE lgnum+
 +ubnum+
 +FROM lubu+
 +INTO wa_lubu+
 +WHERE lgnum = wa_lqua-lgnum+
 +AND mblnr = wa_qamb-mblnr.+
 +CLEAR i_bdcdata.+
 +REFRESH i_bdcdata.+
 +REFRESH i_messtab.+
 +CLEAR wa_bdcdata.+
 +wa_bdcdata-program = 'SAPML03T' .+
 +wa_bdcdata-dynpro = '0141' .+
 +wa_bdcdata-dynbegin = 'X' .+
 +APPEND wa_bdcdata TO i_bdcdata .+
 +CLEAR wa_bdcdata .+
 +wa_bdcdata-fnam = 'BDC_OKCODE' .+
 +wa_bdcdata-fval = '/00' .+
 +APPEND wa_bdcdata TO i_bdcdata .+
 +CLEAR wa_bdcdata .+
 +wa_bdcdata-fnam = 'LUBU-UBNUM'.+
 +wa_bdcdata-fval = wa_lubu-ubnum.+
 +APPEND wa_bdcdata TO i_bdcdata .+
 +CLEAR wa_bdcdata .+
 +wa_bdcdata-fnam = 'LUBU-LGNUM'.+
 +wa_bdcdata-fval = wa_lqua-lgnum.+
 +APPEND wa_bdcdata TO i_bdcdata .+
 +CLEAR wa_bdcdata .+
 +wa_bdcdata-fnam = 'RL03T-DUNKL'.+
 +wa_bdcdata-fval = 'H'.+
 +APPEND wa_bdcdata TO i_bdcdata .+
 +CLEAR wa_bdcdata.+
 +wa_bdcdata-program = 'SAPML03T' .+
 +wa_bdcdata-dynpro = '0143' .+
 +wa_bdcdata-dynbegin = 'X' .+
 +APPEND wa_bdcdata TO i_bdcdata .+
 +CONCATENATE 'RL03T-SELKZ('+
 +v_position+
 +')'+
 +INTO v_str.+
 +CLEAR wa_bdcdata .+
 +wa_bdcdata-fnam = v_str.+
 +wa_bdcdata-fval = 'X'.+
 +APPEND wa_bdcdata TO i_bdcdata .+
 +CLEAR wa_bdcdata .+
 +wa_bdcdata-fnam = 'BDC_OKCODE' .+
 +wa_bdcdata-fval = 'BU' .+
 +APPEND wa_bdcdata TO i_bdcdata .+
 +CLEAR wa_bdcdata.+
 +wa_bdcdata-program = 'SAPML03T' .+
 +wa_bdcdata-dynpro = '0142' .+
 +wa_bdcdata-dynbegin = 'X' .+
 +APPEND wa_bdcdata TO i_bdcdata .+
 +CLEAR wa_bdcdata .+
 +wa_bdcdata-fnam = 'BDC_OKCODE' .+
 +wa_bdcdata-fval = 'BU' .+
 +APPEND wa_bdcdata TO i_bdcdata .+
+*......changes as per ticket 44206+
++* CLEAR wa_bdcdata .++
++* wa_bdcdata-fnam = 'LQUAU-KZUAP(01)'.++
++* wa_bdcdata-fval = 'X'.++
++* APPEND wa_bdcdata TO i_bdcdata .++
+*......end of changes as per ticket 44206+
 +CALL TRANSACTION 'LT05' USING i_bdcdata+
 +OPTIONS FROM wa_ctu_params+
 +MESSAGES INTO i_messtab.+
Regards,
Raja

hi , please check the link below
[http://help.sap.com/saphelp_nw70/helpdata/en/41/7af4c5a79e11d1950f0000e82de14a/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/41/7af4c5a79e11d1950f0000e82de14a/content.htm]

Need to know which user has locked the table.

hi ,
We are using a table named fm_sec_dict .when we try to disable the triggers and insert data into the table and enable the triggers asociated with the table.after inserting ,we are getting a message
RESOURCE BUSY ACQUIRED NO WAIT option.
please give the querry to find which user and what SID is using the Table ,so that we can kill the session.
so that other users can work with out any obsturctions.
thanks in advance...........

Check in OEM.

Does MM_EKKO archive write job lock the tables?

Archive experts,
We run MM_EKKO archiving twice a week. From my understanding the write job just read the data and write it to archive files. But we run Replenishment jobs which hit EKPO tables, the jobs run slow, and I noticed that the archive write job is holding the locks on this table. As soon as I cancelled the write job, the replenishment jobs move faster. why this happens? Archive write jobs should not be causing any performance issues, only the delete jobs will impact the performance. Am I correct? Is any one experiencing similar issues?
Sam

Hi Sam,
Interesting question! Your understanding is correct, write job just reads the data from tables and writes it into archive files... but....write job of MM_EKKO (and MM_EBAN) is a bit different. The MM_EKKO write job also takes care of setting the deletion indicator (depending on whether its a one step or two step archiving. So its possible that it puts a lock during the process of setting the deletion indicator, as its a change to database.
please have a look at the folloing link for the explanation of one step and two step archiving:
http://help.sap.com/saphelp_47x200/helpdata/en/9b/c0963457889b37e10000009b38f83b/frameset.htm
Hope this explains the reason for the performance problem you are facing.
Regards,
Naveen

How we can lock No more than one user can use the table at a single time

Hi Abapers,
0) which function modules to lock & unlock a table.
1) When you execute the program, we can check if there is any lock on this table. If yes, the user should be able to only view the table contents and not modify.
2) If there is no lock, then lock the table and go into change mode.
3) On exiting from the program, unlock the table using the function module.
4) more than one user can't modify the table just display.
Note: If there is any lock, display message saying table is locked.
Plz help me for this requirement.
Thanks
Nani

Hello Nani
Have a look at the lock object EMMARAE (Lock MARA and MARM/MAKT exclusively) in transaction SE11.
Inspect the F1 help for field Lock mode:
DE ENQMODE
Short Text
 Lock mode
Definition
 Defines how to synchronize table record access by several users.
The following modes exist:
 Exclusive lock
 The locked data can be read or processed by one user only. A request
 for another exclusive lock or for a shared lock is rejected.
 Shared lock
 Several users can read the same data at the same time, but as soon
 as a user edits the data, a second user can no longer access this
 data. Requests for further shared locks are accepted, even if they
 are issued by different users, but exclusive locks are rejected.
 Exclusive but not cumulative lock
 Exclusive locks can be requested by the same transaction more than
 once and handled successively, but an exclusive but not cumulative
 lock can only be requested once by a given transaction. All other
 lock requests are rejected.
If you want to lock a standard table search whether the table is used in lock objects (Where-Used-List). If it is a customer table you have to create your own lock object (including two function modules: one for enqueuing and the other for dequeuing).
The lock modules can be found in menu GoTo -> Lock Modules.
Given these lock modules the logic should be quite clear after starting the program:
1. Request lock -> if successful, continue in Change mode; -> if failed, continue in Display mode
2. Before leaving the report remove lock (note: no problem if no lock has been set in the beginning).
Regards
Uwe

How can I lock a table so that a person can only enter data, not manipulate the table?

I don't want to Lock the table as Numbers does it so perhaps locking is the wrong term. What I want to do is to lock the formatting of the table so it is possible to enter data but not possible to change the position, number of columns etc. I've been searching and all I can come up with is the regular lock function. But I still want to be able to use the cells. Just not change formatting.
Thanks, Brad

you cannot. When you lock a table the whole table is locked. I would consider segmenting the user input into a seprate, un-locked table and placing the calculations in a locked table

Trapping the selected row in the table using boolean checkbox

Hi,
I am using Jdev 11.1.1.2.0 with ADF 11g.
I have a screen that has a table with an additional column of 'Select boolean checkbox'. I have assigned a valuechangelistener method that helps me know which row has been selected. But the issue is it gets fired for all the rows in the table once I select/de-select a checkbox of 1 single row.
How can I handle this? Yes I can iterate through the table rows and check the values of the checkbox. But that is not I want, I also want to trap the de-select event.
What is the way to achieve this?

Timo Hahn wrote:
I don't see a bug in this behavior. This is because each row gets stamped when they render.
The way to do this is to use an attribute (which can be transient) to hold the status of the check box. Exactly this does the link I gave.
TimoHi,
Why I am saying it as a bug is because it is not firing the event for the record where the event has occurred. instead the event is fired for each row which should definitely not what is expected. And because of this we have to add an additional variable.
Now it becomes more complex if I have to handle de-selection as well, b'coz if the valuchangelistener is going to fire for all the records then I need to know which row was previously selected and now de-selected as now the de-selected record will also return a false.
So any better solution, anyone?

Default selection of a row in the table

Dear all,
I have given output of one table as the input to an RFC and the output of this RFC is given to a table and the same scenario we followed for the graphs also. By default first row of the table is getting selected because of that the second table or graph is getting displayed without any user interaction. Please tell us how can we avoid the above. I tried by using guard condition of select but i am unable to control it. Please tell us detailed procedure by which directly i can follow the same.
Regards,
Suman.

Hello Suman,
Please, look at 'No First Select from Table' section of this blog: [/people/jarrod.williams/blog/2006/12/14/visual-composer-tips-and-tricks|/people/jarrod.williams/blog/2006/12/14/visual-composer-tips-and-tricks]
Good luck,
Ola

Newby: locking the table on a SELECT?

Similar Messages

Maybe you are looking for