Newly created Applications do not appear in Software Center or Application Catalog

I'm still rather new to SCCM; but I'm slowly working towards configuring an application to be deployed to my clients via an application package that I configured.  I set something up for deployment, and it's my understanding that the app should show
up in the software center for the users that it's deployed to.
However, I'm having an issue where not only is it not showing up, but it's not being installed on the clients I've deployed it to.  The main problem is that I have no idea how to troubleshoot this - I don't know what logs to look at for issues (or where
the logs are); and I've been having a ton of trouble locating 'basic troubleshooting' info for application deployment.  
If anyone could point me towards info that can get me on the right path for troubleshooting why my application isn't either automatically installing on the clients or why it isn't showing in the software center/application catalog, that would be very helpful.
Thanks!

I created the app on Monday, then did the deployment to a computer collection; Tuesday I read something that implied for it to show in software center it had to be deployed to a user collection, so I did that.  I have told it to distribute the content
to all 3 of my distro points (three physical offices, one DP in each office), and I did that on Monday, then again on Tuesday when I deployed to the user collection.  
Looking at it now, it seems as though the content hasn't been deployed to the other DP's yet though.  When I go to Monitoring - Distribution Status - Content Status and select the application I created, it shows the status as 1 success (primary office/sccm
site/where the content was located when I created the package), and two as 'in progress' (other two sites), but has shown in progress for over 24h now.   When I look at the further detail for the distribution - for one site the message shows last status
time of yesterday at 4:30pm and says "the content files for package <package id> have not yet arrived from the source site."  the other one has the same last status time, but says "distribution manager instructed scheduler to send
package <package id> to child site."  
So either the distribution is taking forever or it hasn't updated the status since it finished.  Either way, maybe this is the par that I need to look into?

Similar Messages

  • After uninstalling a program, it does not appear in Software Center

    Hello,
    We had a program that was not working, so we removed it (via Programs and Features) with the intent to run the deployment again from Software Center. However, the app no longer appears in Software Center, even after running an Application Deployment Evaluation
    Cycle and a Machine Policy Retrieval and Evaluation Cycle.
    It appears that Software Center isn’t re-detecting the need to list the app. We have seen this before with another app. In both cases, we had to go into SCCM, find the install command for the app, and run that command manually.
    Any ideas as to what might cause this?

    App is called Doceri, 32-bit, version
    Command: "Doceri_Desktop_setup_2_0_18.exe" /verysilent
    Detection Rule: Setting Type = Registry; Hive = hklm; key = SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{BE44D80F-62BF-48E2-A3CB-4A8A26B25859}_is1; value = displayVersion; data type = string; This registry must satisfy the following rule to indicate
    the presence of this application- operator: Equals; value: 2.0.18.0
    Working on duplicating the problem on another workstation in order to collect logs.

  • Newly created files do NOT appear in finder

    When I bounce files from Logic7 or Logic8 and then switch to the "Bounces" folder, in the finder window that I usually have open in the background, the file that I just bounced does not appear there. The only way to get it to appear is to manually browse to another folder and then back to the "Bounces" folder so that the finder refreshes that folder's contents.
    This was not a problem until I upgraded to 10.5.4 and Logic8. I was previously on 10.4.9 and Logic 7.2.
    Other apps seem to be able to save documents and files to a folder, and they immediately appear in the finder window. Seems like yet another instance where Logic and the OS are not playing nice with each other.
    Anyone else having this problem? Any other apps behaving this way with the OS?

    +1 here!

  • List of planning applications does not appear

    Hello,
    in EAS i create New Rule -> in Rule Editor displays in right pane -> i click on Select outline -> The Select Database Outline dialog box displays -> when i click on +planning -> nothing is displayed: the list of my planning applications does not appear !!
    is this normal?
    N.B : i use hyperion planning V11.1.1.3
    cheers,

    Did you log into the planning application first before logging into EAS, if the planning application service was recently restarted and there have been no logins to the applications then they won't appear.
    As a test log out of EAS, log into one of the planning applications, log into EAS
    Also be sure that the planning applications have been created to use Business Rules and not Calculation Manager if you want to use EAS.
    If you are still having issues then it may be worth having a read of the following document on Oracle Support - "Troubleshooting Hyperion Business Rules Issues [ID 763345.1]"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)?  Thank you!

    Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)?  Thank you!

    >> then I get a completely blue screen.
    That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
    And sure enough, your video card driver is almost 2 years out of date.
    Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

  • App is not visible in Software Center. Won't deploy.

    Hello
    I have recently deployed an app that will not display in Software Center and does not install.  It is a MSI installation that supersedes another.
    This is what AppDiscovery.log says:
    Performing detection of app deployment type myapp - Windows Installer (*.msi file)(ScopeId_59C0D6BB-77EB-4AF1-8913-66B653DA25C2/DeploymentType_8b61105b-7846-454d-be52-7c80a358355e, revision 2) for system.
    AppDiscovery 2015-03-04 2:23:06 PM
    6500 (0x1964)
    +++ MSI application not discovered [MSI Product Code: {5522C2D6-1FC7-4E21-8BAA-CA7FC64D7399}, MSI Product version: ]
    AppDiscovery 2015-03-04 2:23:06 PM
    6500 (0x1964)
    +++ Did not detect app deployment type myapp - Windows Installer (*.msi file)(ScopeId_59C0D6BB-77EB-4AF1-8913-66B653DA25C2/DeploymentType_8b61105b-7846-454d-be52-7c80a358355e, revision 2) for system.
    AppDiscovery 2015-03-04 2:23:06 PM
    6500 (0x1964)
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_59C0D6BB-77EB-4AF1-8913-66B653DA25C2/DeploymentType_d97c36a4-7569-4896-8445-e0b9c4b42d57" AND Revision = 1)"
    AppDiscovery 2015-03-04 2:23:06 PM
    6500 (0x1964)
    There is no mention of it in AppEnforce.log.
    The command line used is msiexec /i "myapp.msi" /qn /norestart
    I've deployed many apps and never run into this before.  Anyone know what could be the problem?
    Hutch

    Then you ran into a still unresolved bug, see http://www.mssccmfaq.de/2013/03/15/fehlende-applications-im-software-center/. (Just use your favorite
    translation engine)
    Torsten Meringer | http://www.mssccmfaq.de

  • Lync does not appear in notification center

    I have the latest version of Lync installed (4.2.6609.0000). When installing the app (I have tried deleting and reinstalling several times) the app does not ask me if I wish to receive push notifications. Therefore I assume this is the reason it does not appear in notification center and therefore unless actually in the app I do not see chats if in screen lock or another app etc.
    On the previous version of Lync I had the same problem. However, I found that if I loaded Lync, powered off, powered back on again and reloaded Lync I could get it to appear in Notification Center and it worked in the background/screenlock etc.
    Is there a way to force it into Notification Center so it will work in the background? When deleting I use app center via 3G so do not connect to a PC etc.
    Any ideas or help here. Great tool, but a little useless if it cannot notify me of conversations from other users.

    With the previous version of Lync if you loaded Lync, powered off, back on, loaded Lync it would appear in notification centre. But this doesn't seem to work now.
    However, as I mention other colleagues with the same phone, IOS version etc do work.

  • Events "full day" does not appear in Notification Center

    hello,
    Events " full day " does not appear in Notification Center on my iPhone 6 If I add an event at a specific time today , this event is displayed. Otherwise , the part calendar ( on today's page ) show " no events " even if there is one or more events " full day " .
    iOS bug or wrong setting on my part ?

    With the previous version of Lync if you loaded Lync, powered off, back on, loaded Lync it would appear in notification centre. But this doesn't seem to work now.
    However, as I mention other colleagues with the same phone, IOS version etc do work.

  • Quantity is not appearing on Cost Center report S_ALR_87013611

    Hi Fellows,
    Quantity is not appearing on cost center report S_ALR_87013611. When we go to the line items it is appearing. Could you please help me in this regard.

    Hi,
       Please refer note 64120
    regards
    Waman

  • GP, callable object Web Dynpro Application (bespoke) not appearing in list

    Hey y'all
    We're developing our first GP, and we would like to call an existing bespoke Web Dynpro. When creating the callable object, we're selecting type Web Dynpro Application, but our Web Dynpro screen is not appearing in the drop down list on the next page. We think that this is because the application has been deployed to a different server (i.e. it has not been deployed onto the portal server).
    So the question is, has anyone faced this problem before, and is there a solution?
    Kind regards
    Jon

    Hi John,
    Please have a look at this Exception on creating GP Action
    This will solve your issue definitively. Do not take care of a given SDA, just redeploy everything and make sure that everything is overwritten by selecting the right option.
    Best regards,
    David

  • Application does not appear

    Hello,
    I created a new application in BPC 7.0 for MS. Then I start BPC for Exel and try to choose my new application but there is not it. What do I have to do application will be appeared?
    Regards,
    Veronika.

    Hi Veronica,
    Whenever we create a new application, we need to define member access profile for that particular application. Without this, the application will not be accessible to any users.
    In BPC Admin, go to secutiry -> member access profile. Modify the member access profile. You will be able to see tabs for each of the applications. Go to the tab for your application. Mention the appropriate rights. Ideally, we give "read and write" to all members of category dimension and "read" access to all members of the entity dimension. However, you can customize this based on your requirement. Once the profile is saved, go to BPC excel, go through connection wizard. You will be able to see your new application.
    Hope this helps.

  • Planning application is not appearing in workspace

    Hi All,
    i have created application in hyperion planning from Appwizard,
    when i trying to open application from workspace am not able to see hyperion planning path to open Application.
    am not understand how to solve prb i try to redeploy in configurator but it is asking for new port number which is not used
    can any one help me in sloving this issue.
    but in shared service application is appearing.
    Thanks in advance
    Regards
    SM

    Depending on version you may not be using the default cluster/instance or it may not be active Re: Not able to see planning applications in the drop down list in 11.1.3
    If it is not that that then the foundation web server may need configuring again.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Install application step on task sequence - application does not appear in the application list

    Hi,
    I am trying to create a build and capture task sequence and add some application installation steps in the process.
    On Install the following applications step when I click the star to choose which applications I want to install, Office 2010 application is not listed there, even though it is available in software library
    and and I've been installing it successfully from application catalog.
    I tried changing the setting "Allow this application to be installed from the Install Application task sequence action instead of deploying it manually", but it had no effect.

    See http://technet.microsoft.com/en-us/library/hh846237.aspx:
    The applications that are installed must meet the following criteria:
    It must run under the local system account and not the user account.
    It must not interact with the desktop. The program must run silently or in an unattended mode.
    It must not initiate a restart on its own
    Torsten Meringer | http://www.mssccmfaq.de

  • Can't upgrade my software from OS X 10.6.8 to 10.8. It does not appear in Software update either?

    Hi,
    My mail has stopped working on my Macbook and I think I need to update my software from OS X 10.6.8 to 10.8. Strangely though it does not appear in my software updates. Can anyone offer any advice?

    you need to buy 10.8 from the app store.  also, upgrading to a new version of OS X will most likely not fix the problem.

  • Create genius does not appear as a choice under Store

    I want to create a genius playlist, but CREATE GENIUS PLAYLIST does not appear under Store.  I have updated for genius.  When I hover over a song and click the icon, there is no choice for creating a playlist from that song.

    Hi fastmax49!
    Here is an article that will tell you a little more about the Genius features in iTunes:
    iTunes 11 for Windows: Use Genius Shuffle, Genius playlists, or Genius Mixes
    http://support.apple.com/kb/PH12342
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

Maybe you are looking for