Newly created Service Interface does not exist in SOAMANAGER

Hi all,
Here is an interesting dilemma we are having we just put up a PI sandbox and are validating scenarios.  We have installed 7.11
We created a new sender agreement and published to the Services Registry.  We are able to send the message into the system; but we do not see payload at all in SXMB_MONI which is our first issue and we are wondering if that has something to do with the security set on the web service by default.  This is a SOAP call into PI from a .NET application.
When we go into SOAMANAGER to set the security on the service it is not displayed.  Is there some additional step we need to do to get the service to show up in SOAMANAGER?  Or something we need to do with our new namespace to get SOAMANAGER to search? 
We are looking in SOAMANAGER -> Application and Scenario Communication -> Single Service Administration which is where we would expect the the service to exist; but, it does not.
Thanks, Greg

Hi Greg,
If there is a problem with the search not returning the desired result,could you please refer the
SAP Note Number: 1412081 which talks about   correction for not getting expected results when Searching
with 'BOTH' in SOAMANAGER for Service Groups.
Yes you are right it does not have to be a proxy all the time,Please refer the blog which explains about service definition
in abap
/people/shibaji.chandra3/blog/2010/02/17/soa-web-service-expose-and-consume-configuration-with-soamanager
/people/bv.pillai/blog/2008/01/27/new-service-definitions-in-the-abap-development-environment-soamanager-150-sap-nw-70-sp14
Regards,
Srinivas

Similar Messages

  • Message interface does not exist in any software components

    Hi masters,
    I'm having problems with this message in my repository when I try to create an Interface determination with two interfaces mapping: "Message interface does not exist in any software components installed on this business system".
    note: I have read all the posts about this problem but nothing has solved it.
    I will describe more or less how is my SLD.
    First all, my Technical System is an Web AS ABAP (non a third party).
    I have created two receivers determination, with out problems, then, created the interface determination, with two Inbound interface, BUT, when I create a condition, the message appears, and the XPath doesn't shows the nodes for do the condition..
    I have checked the GUID, and that's good.
    NOTE: I have a second SWC but this is a third party... and when I test to do the same in this system, I have NO problems... so.. what is wrong with the Web As ABAP?
    Regards and thanks

    did you mean:
    SLD -> Technical System->Technical System Type: WebAsAbap-> Installed Products->Add New Product and add my Software Component???
    if is this, I have already done this, and still doesn't works.
    Thanks

  • Message interface does not exist in any software components installed on th

    Message interface does not exist in any software components installed on this business system.
    hello,
    When I check the interfaces on the business systems of 1 technical system, none of them have sender or receiver interfaces, hance I can't use them. The interfaces should ofcourse be on the Directory.
    I have deleted the business systems and the technical system and created them again, but no result.
    The product and software componets are in the technical sytem and business systems.
    Any help would be usefull.
    thanks,
    Job

    Hello!
    If someone will search in the future for this error, here is the solution:
    The error occurs if the GUID of the software component at the SLD is different to the one at the repository. Please compare the GUID at the SLD -> Administration -> Content Maintenance -> Dropdown "Component Version" -> Dropdown "Software Component Version". At the Integration Repository you select the Software Component Version at at the tab "Keys" you find the related GUID.
    The error occured because the Software component has been created manually at the system. The repository content came from another system via import with own SLD (and because of that with another GUID for the software component).
    Kind regards,
    Klaus

  • Error - "Message Interface does not exist in any software components"

    HI
    This is an Idoc sender - SOAP receiver scenario.
    When I try to create the receiver determination, I get a warning message -
    " Message interface does not exist in any software components installed on this business system"
    I checked all the usual things & also reimported the IDoc metadata.
    Any suggestions are appreciated!
    Thanks
    Rachana

    Hi Rachana !!
    You should also check  if the given idoc type in mapping is the same that in the WE20.
    Also try to reactivate your integration directory objects by making any dummy changes.
    Check your receiver business system (I mean XI), that the logical systems are ok.
    Check this document (page 31):
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f2a9fa2-0a01-0010-32ac-d281db722b86
    Regards,
    Matias.
    Message was edited by:
            Matias Denker
    Message was edited by:
            Matias Denker

  • Service EMPLOYEE_TRAVEL_PLANNING does not exist

    Hi experts,
    We are implementing the travel management in ESS (BP_ERP4ESS 60.2 SP0) with EP 6 SP20, ECC 5.0.
    All works fine, but whe i go to My Trips and Expenses --> My Travel Requests and choose "Create New Travel Plan" on a previous created travel request we get this critical error:
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    Service EMPLOYEE_TRAVEL_PLANNING does not exist.
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Service EMPLOYEE_TRAVEL_PLANNING does not exist.
    at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
    at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
    at com.sap.xss.ser.xssmenu.fc.MenuLinks.getServiceLink(MenuLinks.java:161)
    at com.sap.xss.ser.xssmenu.fc.wdp.InternalMenuLinks.getServiceLink(InternalMenuLinks.java:311)
    at com.sap.xss.ser.xssmenu.fc.FcXssMenu.getServiceLink(FcXssMenu.java:384)
    at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.getServiceLink(InternalFcXssMenu.java:479)
    at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.getServiceLink(FcXssMenuInterface.java:268)
    at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.getServiceLink(InternalFcXssMenuInterface.java:426)
    at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.getServiceLink(InternalFcXssMenuInterface.java:571)
    at com.sap.pcuigp.xssutils.navi.FcNavigation.getNavigationTargetServiceWithKey1(FcNavigation.java:542)
    at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigation.getNavigationTargetServiceWithKey1(InternalFcNavigation.java:379)
    at com.sap.pcuigp.xssutils.navi.FcNavigationInterface.getNavigationTargetServiceWithKey1(FcNavigationInterface.java:271)
    at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface.getNavigationTargetServiceWithKey1(InternalFcNavigationInterface.java:182)
    at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface$External.getNavigationTargetServiceWithKey1(InternalFcNavigationInterface.java:314)
    at com.sap.xss.tra.fc.utils.FcTraUtils.startApplication(FcTraUtils.java:657)
    at com.sap.xss.tra.fc.utils.wdp.InternalFcTraUtils.startApplication(InternalFcTraUtils.java:341)
    at com.sap.xss.tra.fc.utils.FcTraUtilsInterface.startApplication(FcTraUtilsInterface.java:421)
    at com.sap.xss.tra.fc.utils.wdp.InternalFcTraUtilsInterface.startApplication(InternalFcTraUtilsInterface.java:219)
    at com.sap.xss.tra.fc.utils.wdp.InternalFcTraUtilsInterface$External.startApplication(InternalFcTraUtilsInterface.java:425)
    at com.sap.xss.tra.vc.allmytrips.VcTraAllMyTrips.travelPlanDisplayChange(VcTraAllMyTrips.java:325)
    at com.sap.xss.tra.vc.allmytrips.wdp.InternalVcTraAllMyTrips.travelPlanDisplayChange(InternalVcTraAllMyTrips.java:399)
    at com.sap.xss.tra.vc.allmytrips.AllMyTrips.onActionCreateTrvlPlanFromRequest(AllMyTrips.java:595)
    at com.sap.xss.tra.vc.allmytrips.wdp.InternalAllMyTrips.wdInvokeEventHandler(InternalAllMyTrips.java:647)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101)
    at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304)
    at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
    at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Thanks in advance,
    Benoit Caddins

    hi again Deepa,
    I try with the value you put on the reply and still don´t work
    ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.ess.employee/com.sap.pct.ess.roles/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.area_travel_expenses/com.sap.pct.ess.serv_travel_expenses
    So i try this values on the field URL of PCD page and the error is still the same:
    URL of PCD page : ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.ess.employee/com.sap.pct.ess.iviews/com.sap.pct.ess.serv_travel_expenses
    and
    URL of PCD page :
    ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.ess.employee/com.sap.pct.ess.roles/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.area_travel_expenses/com.sap.pct.ess.serv_travel_expenses
    King regards,
    Benoit

  • Error "Service EMPLOYEE_ORGCHART_SERVICE does not exist." in ESS.

    We are on mySAP ERP 2004, and using ESS 60.2 version.
    In the "Employee search" workset when I search for an employee it displays his last name, first name, positon, org unit, job, and some other stuff....Every thing is working great except for.........in the results that are dispalyed when a search is performed, I click on the orgunit that a particular employee belongs to, and its throwing me the following error
    "Service EMPLOYEE_ORGCHART_SERVICE does not exist".
    Has anyone come across this?
    Any suggestions on how to fix this is highly appreciated with points.

    Hello John,
    The links in SAP ESS Applications are built at runtime. The configuration for these links and the complete ESS/MSS Menu has been provided in the IMG in the backend(For ERP 2004). I do not remember the IMG Path. But yes you need to maintain the entries for Orgchart in the following views. Most probably they will be missing.
    Check if there is an entry in the following view V_T7XSSSERSRV in your backend client.
    Service Short Key - EMPLOYEE_ORGCHART_SERVICE
    If its not there then you need to create one entry like this:
    Service Link Text    Orgchart                                                    
    Service Type         WebDynpro application                                       
    Link Resource       EMPLOYEE_ORGCHART_SERVICE
    Then goto view V_T7XSSSERRES and check if there is a Resource Object Key as EMPLOYEE_ORGCHART_SERVICE.
    This entry will have following details if its exists(else create with following details):
    Resource Key         EMPLOYEE_ORGCHART_SERVICE
    Description     Orgchart                           
    Server                                             
    Directory Path  sap.com/ess~org                    
    Object Name     Orgchart                           
    URL Parameter                                      
    Window Name          Orgchart                      
    Window Properties                                  
    URL for PCD Page:
    ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.employee_search/com.sap.pct.erp.ess.orgchart
    After maintaining these entries it should work.
    Regards,
    Shubham

  • [DOM_10033] Service [informatica_repository] does not exist in domain [Domain_Shan]. [FAULT_PCSFCONFIGEXCEPTION]]. 08/05/2015 16:17:06-[REP_55102] Failed to connect to repository service [informatica_repository]

    Hi Experts, I have aquestion, I am getting phone number as A=123,B = 456C = 7890D= 123(Extension) I need to concatenate like this in informatica power center: (123)456-7890*123  If I dont get any extension, then we should only populate  (123)456-7890 in the target, I need to remove *ext if ext is null...  can somebody help me out with example. Thanks in advance

    Hi All, I have installed informatica Powercemtre and Oracle on windows 7. Have completed the below steps:1. Installed Oracle2. Informatica server and client Configured domain and node3. Created repository and integration service both the services are up running4. Created informatica_repository in client  
    getting the below error while trying to connect or add to the repository 08/05/2015 16:16:05-[REP_12164] Domain-related error: [[DOM_10033] [DOM_10033] Service [informatica_repository] does not exist in domain [Domain_Shan]. [FAULT_PCSFCONFIGEXCEPTION]].08/05/2015 16:16:08-[REP_55102] Failed to connect to repository service [informatica_repository].08/05/2015 16:17:03-[REP_12164] Domain-related error: [[DOM_10033] [DOM_10033] Service [informatica_repository] does not exist in domain [Domain_Shan]. [FAULT_PCSFCONFIGEXCEPTION]].08/05/2015 16:17:06-[REP_55102] Failed to connect to repository service [informatica_repository]. Domain Name: Domain_ShanHost: ShanPort : 6001  tried the below possible solutions1. Update hosts file with machine ip and host name2. Checked for Oracle services and Informatica services 3. Tried deleting and recreatinf repository  Please can anyone suggest solution for this. Thanks,Avinash

  • Message Interface does not exist in IR u0096 but it does!

    Hi, well again i have a problem. I am still trying to get the XI-demo Checkflight…. to run but there are some obstacles on my way.
    I just wanted to check a MI given in the ID to check the attributes and picked it in the ID to get linked to the IR but a pop-up appears saying
    “Message Interface does not exists in Integration Repository”
    What’s the reason for this because obviously it is there, still existing.
    I tried to refresh the cache of all XI-components, did a server restart but nothing seems to be working.
    On the other hand I have some other questions:
    -     Why is it not possible to delete an object (business system) from the ID? I know because of the dependencies of the different channels but it should be possible because of re-generation of the communication-channels (this was also my approach for solving the problem mentioned above!)
    -     When do I have to refresh the cache in general? Is it indefinite whenever I want to or it seems to be the right time because something is not running the way it should and it seems a little odd

    Hi Carsten Heinrich,
    This will help you,
    1)     Cache Connectivity Test
    In RWB component monitoring, we now have the option of checking whether the cache-connectivity is functioning correctly. This is useful when we are experiencing problems when updating the runtime cache. The system displays a separate window in which we perform the test. If no previous tests have been performed, the system displays a corresponding message. Otherwise, the system shows when and by whom the last test run was started, together with the result of this test.
      To start a new test run, choose Start Test.
    The system displays the first results of the test run. Since the whole test takes some time, we can update the displayed results if necessary.
    To Update the displayed results, choose Refresh Display.
    The overall result for each component is displayed as a green, yellow, red, or gray symbol. A green symbol is only displayed if both update steps for the runtime cache were successful, that is, they both have a green symbol.
    2)     Cache notification status
    a)     Start the Integration Repository.
    b)     Select Environment ® Cache notification.
    c)   Have a look at the entries for the relevant user and date.
    d)   Have a look at the entries for the relevant cache instance, user and date.
                   3)    Cache update and resend the message
    a)Start transaction SXI_CACHE.
    b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
    c)     Call transaction SM58 to check the status of the refresh process.If no entry for function module SAI_CACHE3_REFRESH_BACKROUND is Present any more the cache update is finished.        
             4)     Deleting the SLD Cache
      Many actions require  to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
    However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
    To clear the SLD cache, from the Integration Builder main menu, choose Environment  ®  Delete Cache for SLD Data.
    Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
    Regards
    Agasthuri Doss

  • Message interface does not exist in any software components installed

    "Message interface does not exist in any software components installed on this business system"
    Essa é a mensagem de erro que estou tendo ao tentar configurar o XPath Receiver Determination do cenário SRVSC_WebAS_Outbound_ServiceStatusCheck.
    Já notei que a mensagem dá porque o meu BS da NFe não está com o SWCV SAP SLL-NFE 1.0. Mas isso só no ID porque no SLD ele aparece. Não sei mais o que fazer pra ele aparecer no ID. Já eliminei o BS, executei um refresh do cache do SLD, depois executei um refresh full e nada! Quando eu crio o BS novamente, ele vem sem o SWCV SAP SLL-NFE 1.0.
    Tive que configurar o XPath na mão para todas as SEFAZes!!!
    Já li vários threads a respeito desse erro e executei vários procedimentos sugeridos, mas nada.
    Alguém já possou por isso?!?

    para ser mais preciso, verifique no payload de envio e recebimento da mensagem de verificacao de status do servico se estao correspondentes ao que estao abaixo, essa mensagem é de verificacao do SEFAZ de SP (35) para o ambiente de homologacao
    (SENDER)
    <?xml version="1.0" encoding="utf-8"?><n0:nfeStatusServicoNF xmlns:n0="http://sap.com/xi/NFE/005a" xmlns:prx="urn:sap.com:proxy:PID:/1SAI/TASE95D30ADB76F1544C2D5:700:2009/02/10" xmlns:n1="http://www.portalfiscal.inf.br/nfe"><n0:cUF>35</n0:cUF><n0:tpEmis>1</n0:tpEmis><n0:tpAmb>2</n0:tpAmb><n0:nfeCabecMsg><n1:cabecMsg versao="1.02"><n1:versaoDados>1.07</n1:versaoDados></n1:cabecMsg></n0:nfeCabecMsg><n0:nfeDadosMsg><n1:consStatServ versao="1.07"><n1:tpAmb>2</n1:tpAmb><n1:cUF>35</n1:cUF><n1:xServ>STATUS</n1:xServ></n1:consStatServ></n0:nfeDadosMsg></n0:nfeStatusServicoNF>
    (RECEIVER)
    <?xml version="1.0" encoding="UTF-8"?>
    <nfeStatusServicoNFResponse xmlns="http://sap.com/xi/NFE/005a"><nfeStatusServicoNFResult><retConsStatServ xmlns="http://www.portalfiscal.inf.br/nfe" versao="1.07"><tpAmb>2</tpAmb><verAplic>SP_NFE_PL_005e</verAplic><cStat>107</cStat><xMotivo>Serviço em Operação</xMotivo><cUF>35</cUF><dhRecbto>2010-05-26T09:37:22</dhRecbto><tMed>1</tMed></retConsStatServ></nfeStatusServicoNFResult></nfeStatusServicoNFResponse>

  • SQL Server Browser service group does not exists. Check for earlier failures in the setup. during sql express 2008 R2 setup

    Hello,
    I have an issue while installing SQL Server 2008 R2 Express. When I was installing SQL Server, I occurred an error message as shown in the figure.
    I have followed couple of links as in
    this and
    this links but it did not fix the issue. Can anyone help me on this issue?
    Regards
    Gaurav

    Hi gauravroondhe2306,
    According to your description, you fail to install SQL Server 2008 R2 express with the error that SQL Server Browser service group does not exist. Please help to post SQL Server setup error log for analysis. By default, SQL Server setup summary and detail
    logs are located in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    Based on my research, this issue could occur when you install SQL Server on a Domain Controller, or the machine's name has been changed and the browser service group is named with the original machine's name.
    To troubleshoot the issue, you could follow the solutions below.
    1.Use SQL Server 2008 R2 Best Practice Analyzer to detect if SQL Server is installed on a domain controller. If SQL Server is installed on a domain controller, please demote your machine from being a domain controller and install the SQL Server again since
    it is not recommended to install SQL Server on a domain controller.
    2.Check if the name of local user group matches the machine's current name. If it doesn't match, please change the name of the local user group accordingly, and install SQL Server again. For more information about the process, please refer to the article:
    http://geekswithblogs.net/TedStatham/archive/2014/04/15/installation-problems-with-sql-server-2008-r2-express.aspx
    Regards,
    Michelle Li

  • PO/ Invoice created for supplier does not exist for particular company code

    Hi Gurus,
    We have a case where PO created w.r.t supplier X does not exist for any company code A. Also Invoice is generated.
    As per my analysis:
    1. Purchasing organization is assigned to the particular plant and Plant does assigned to company code. This purchasing organization does not assigned to any company code and kind of centrally allowed to any company code based on above link.
    2. Supplier X does exist for the purchasing organization. And in Partner function-For PI (Invoice presented) partner function, it is defined for another supplier Y. This Y supplier does exist for company code A and might be the reason, it is allowing creating PO and Invoice.
    Please correct me, if I am wrong or If there will be any other reason for the same. Just for your information, there is no Info record exist for this PO as it is created for service without any material number.
    Thanks for your response.
    Best regards,
    Karun Kumar

    You can create vendor only with reference to purchase organization and withoout company code.
    for this vendor, you can create PO and MIGO and system will allow but when you try to post the invoice system will prompt you to enter different invoice party. if you dont enter different invoice party, system will throw an error message "vendor is not defined in XXXX.
    So in your case, your analysis is correct.

  • Can a directory to be created if it does not exist on FTP server?

    Hello SOA experts,
    We are good with most common usage of all Adapters. But recently, I am facing a challenge when archive files on FTP server.
    Archive files need to be placed into different folders for each month. For instance, ./archive/201308 for files archived in August. Next month, a new directory ./archive/201309 should be created, ideally automatically.
    My question is, can I do through some configuration and properties setting to let SOA create a remote target directory when it does NOT exist?
    We maintained multiple archive folders for different typr of documents. It is really a hassle to create them manually. And if the target directory does not exist, it would throw errors.
    Thank you very much in advance.
    Alena Li
    CGI

    Hi, After reading your post, I myself wanted to test this out. I thought that by configuring the following in the Adapter Wizard it would create the remote directory for me:
    <adapter-config name="FW" adapter="File Adapter" wsdlLocation="FW.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
      <connection-factory location="eis/FileAdapter"/>
      <endpoint-interaction portType="Write_ptt" operation="Write">
        <interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
          <property name="PhysicalDirectory" value="C:\Archive"/>
          <property name="Append" value="false"/>
          <property name="FileNamingConvention" value="%SEQ%\test.txt"/>
          <property name="NumberMessages" value="1"/>
        </interaction-spec>
      </endpoint-interaction>
    </adapter-config>
    It failed on my BPEL instance however I could see that it was trying to create the file. When I created all destinations it was able to create it.
    This is my recommendation from what I understand you'd like to accomplish:
    Create the different Year&Month folders on your destination from Jan to Dec:
    201301
    201302
    201303
    201304
    201305
    201306
    201307
    201308
    201309
    201310
    201311
    201312
    (You can actually create as many as you want going to 2090 if you want...
    Add the below config to your JCA File:
    <adapter-config name="FW" adapter="File Adapter" wsdlLocation="FW.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
      <connection-factory location="eis/FileAdapter"/>
      <endpoint-interaction portType="Write_ptt" operation="Write">
        <interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
          <property name="PhysicalDirectory" value="C:\Archive"/>
          <property name="Append" value="false"/>
          <property name="FileNamingConvention" value="%yyyy.MM%\filename"/>
          <property name="NumberMessages" value="1"/>
        </interaction-spec>
      </endpoint-interaction>
    </adapter-config>
    This will allow the files to be dynamically created in the correct directories.
    This is a work-around and I hope this works for you.

  • ESS: Employee Self Services,  Hrxssce_Service_Appl_Path does not exist

    Hi,
    I am having real problems implementing the employee self services in a Portal environment. It is located on a NW 7.0 JavaAddin with SP 15.
    I followed the configuration guides on help.sap.com and rechecked all settings. I could also find some threads here in SDN-community but nothing helped so far.
    My components in the server are SAP_ESS 600 SP13 and BP_ERP5ESS 1.0 SP13 . The different xss components are of version 600.
    The error I get is always after a click on a specific function:
    com.sap.dictionary.runtime.DdException: Type com.sap.pcuigp.xssutils.pernr.model.grpinfo.types.Hrxssce_Service_Appl_Path does not exist
    The default trace of the server node shows this error message:
    sap.com/ess~cod/ChangeOwnDataApplication#com.sap.tc.webdynpro.services.exceptions.TypeNotFoundException: type com.sap.pcuigp.xssutils.pernr.model.grpinfo.types.Hrxssce_Service_Appl_Path could not be loaded: com.sap.dictionary.runtime.DdException: Type com.sap.pcuigp.xssutils.pernr.model.grpinfo.types.Hrxssce_Service_Appl_Path does not exist
    The only thing that I can imagine is that I used a wrong version. Is there a source where I can read about the correct releases for the correct SP-Stacks?
    Does anyone have other Ideas or hints?
    Thanks in advance,
    André

    Hi Guys
    As per note 1303362 check
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
    To ensure you are using corresponding versions and SP levels
    I can't see any problem with SAP_ESS 600 SP13 and BP_ERP5ESS 1.0 SP13  - however are these installed on the same Portal ?
    are you also using SAP_HR and EA_HR version 600 in the ECC system (as recommended) - did you implement Netweaver EHP1 in ECC or Portal (not recommended for ERP 6.0)
    A common reason for this issue is XSS versions are not corresponding version to SAP_HR and EA_HR - this includes component PCUI_GP which should be at version 600 for SAP_ESS 600 useage
    Best wishes
    Stuart

  • What will be data type for the newly created Service Interface def.?

    hi @,
    I am using new Service interface for the start event with objective that any outside application will be able to trigger the BPM. I have created the same SI and its operation and Input params. Now when the request comes there is an exclusive choice gateway which based upon the input fields decide which path to take into consideration. Now I need to map the SI input to the Data object but which data type I need to use ideally it should be the data type defined in the Service Interface should be used but I am not able to locate the same in the data type folder .
    How can I map the input service interface data type to the Data object so that it is available in the next BPM steps?
    Thanks,

    Hi,
    Typically the used types in a new service interface are anonymous. Try making the used complex type a global one (Right-Click onto it -> Refactor -> Make Anonymous Type Global).
    Afterwards you could use the speed button around your your 'start event' and create a new 'data object' from there. Now the IDE automatically assigns the type of the service interface to your 'data object' and  performs the standard mapping between the 'start event' and the 'data object' in addition.
    Please also have a look at the documentation for further information:
    Accelerated Modeling with Speed Buttons
    http://help.sap.com/saphelp_nwce711/helpdata/en/16/52f063cac643d2917347aab86930ef/frameset.htm
    There is also an interesting blog entry dealing with data objects and their reuse:
    How to avoid modeling errors in Netweaver BPM? Part 3: Data flow in style
    /people/soeren.balko/blog/2009/02/03/how-to-avoid-modeling-errors-in-netweaver-bpm-part-3-data-flow-in-style
    Hope that helps,
    Martin

  • Newly created sub-folder does not appear in correct location

    Hello, When I attempt to create a sub-folder in Finder the newly created folder is located at the bottom of the Documents drive and not within the folder I'd originally selected, eg:
    1) viewing the Finder in List view, selected a folder in the Documents Drive, eg DOCUMENTS / WORK
    2) from the "Action" button at the top of the Finder page I've selected "new folder" option
    3) A new folder has been created but it's placed at the bottom of the Documents drive, eg DOCUMENTS / UNTITLED FOLDER
    I've attempted this a number of times and always with the same results, is this bug occurring for all 10.5 users? I hope not because this is a shocker.
    Any advise or suggestions would be greatly appreciated.

    This appears to be a design decision, as when you're in list view, the current folder is the one displayed in the window. If you want it to work the way you think it should, use column view.
    (35826)

Maybe you are looking for