Next FLV won't ever load

Ok...I have 2 flv files that come from my database that tell
the player where the 2 FLV"s are that it needs to play.
(videos/geeksquad.flv and videos/geeksquadoffer.flv). The first one
is loaded and plays upon result from the database like so...
vPlayer.load("videos/" +
res.result.SHOWS._items[0].vchMediaLink);
vPlayer.play();
works fine. Now it gets to the end of the FLV and I do get a
"complete" event which then should load up the 2nd flv using a very
similar call...but it never does. I put a setinterval to keep
telling me what the state of the player is while it doesn't play
the next FLV. The state continues to be "loading" and my traces on
the bytes total and bytesloaded are equal...so it should start.
I hope someone else has run into this before because it's
driving me nuts. I've tried in the interval function to stop and
play the FLVPlayback and try to jumpstart the darn thing...but
doesn't seem to work. HELP!!!!!!!
Thanks!!!

I'm sorry, I didn't pay close enough attention to your question. I think it is most likely a software glitch, either in the iPhone OS itself or Google's map servers. I assure you, you are not the only one affected by quirks like these when it comes to the GPS and Google Maps (These forums are filled with issues about it already). Obviously if it locates you it's not a hardware issue, so at least you don't have to worry about returning the phone or sending it in for repair.
Also, although 3G coverage in my area is typically full bars, there are places where I get 1 bar of 3G. 1 bar of 3G is slower than full bars of EDGE for me, and I get full EDGE bars if I disable 3G in those instances.
If your 3G coverage is spotty, you might try running a free speedtest at:
http://www.dslreports.com/speedtest
There is an iPhone version there, and you can compare EDGE to 3G to see which is faster in your area. Hope this helps.

Similar Messages

  • PLEASE HELP: My "Mail" Has the "Beach Ball" icon and won't ever load...

    My mail on my iMac with newest extension of Leopard is unable to load. The mail app opens and then it starts "thinking" and I wait and wait and nothing happens.
    I have a gmail IMAP account and a POP3 microsoft exchange account in my Apple Mail account on my iMac. The emails work fine on my iPhone and when I directly connect to them. However, the Mail app on my iMac is what is broken. My mail had been working and as of a few days ago it is no longer working.
    Someone had a similar problem posted below.
    Original Question:
    Hi all,
    Today I turned on my iMac and launched Mail, which started behaving really strangely. I have a .mac mailbox, an IMAP mailbox and 3 POP mailboxes. Two of the 3 POP mailboxes have gone berserk. They whirl incessantly, but nothing happens. I opened the Activity window and see, time after time, they supposedly are downloading mail (in fact thousands of pieces of mail which is odd) but the download bar is stuck in the blue and white striped mode. Plus every time I quit and restart, they appear with the exact file being downloaded.
    The other thing is these are two mail addresses with 2 totally different servers. One of them shares an account with the third POP mailbox, and that one seems to be working fine.
    Perhaps Mail needs to be trashed? And reinstalled? But can you install it selectively from the OS disk? And won't it be hopelessly out of date since there have been a number of updates?
    Anyone have any ideas? Many thanks for your assistance.
    MY RESPONSE:
    I am having the EXACT same problem. It won't even let me delete my POP accounts.
    This started happening around the same time that I got some weird "security" pop up when using Firefox; everytime I clicked on a certain link it would take me to this website telling me I needed to update my security. Not sure if these two are related.

    When did you do the latest update for Leopard, and from what version did you update? Has Mail ever worked in this latest version of Leopard?
    Hold down the Shift key while clicking on the Mail icon in the Dock -- does this allow Mail to open?
    Ernie

  • I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

    I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

    If you use extensions like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flashblock</i> that can block content then make sure that such extensions aren't blocking content.<br />
    You can see the installed Firefox extensions in "Tools > Add-ons > Extensions".
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • FLVs won't play when fully loaded (but do play while still loading?)

    With the new flash player (10,1,82,76), my FLVs won't play when they are fully loaded. Previous versions had no problems.
    Curiously, they will play if I click the play button while they are still loading.
    Any ideas are greatly appreciated!

    Well, I found a workaround. If I use myflvplayer.seek(0) before calling myflvplayer.play(), it will work since I am not allowing users to pause.
    Lame.

  • FLV won't load in SWF

    I ran into an issue where a a SWF file loads fine on a
    website when the domain contains the use of "www" or even without
    it. However, I have a video player using an attach movie command
    that then loads an FLV. If you have "www" in your url to the site,
    it works. If you don't, the SWF loads, but the FLV won't. I've
    tried giving an absolute path to the FLV and that does not work
    either. Any ideas?
    try this url with and without the www:
    http://www.aiequine.com/products/tr3_rake.php
    Click on any of the "+" signs to load an FLV

    Hi Hans-Günter,
    thanks for you suggestions, loading to the web didn't change the situation, but lowering the flash version to 9 did thank you!
    so the swf is now loading correctly, here's the website:
    www.flowmusicmethod.com.au
    regards,
    Glenn

  • I click on a link and It won't automatically load the page; I want to change this setting. HOW??

    Hi,
    When I ope my mail in gmail. I click on a link to open a new tab and show me what ever it is I've just clicked on....Firefox won't just load the page like it did before I upgraded to this latest version. It says: Firefox prevented this page from automatically redirecting to another page. and asks me to allow. I allow.
    How can I tell firefox that if I have clicked on a link, I want to view it. That seems intuitive enough. I don't want to allow every time. I do this all day~
    Thanks,
    Melissa

    See:
    *Firefox > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    The setting in "Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
    See also:
    *https://support.mozilla.org/kb/settings-network-updates-and-encryption#w_general-tab
    *http://kb.mozillazine.org/accessibility.blockautorefresh
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • The NYT website won't stop loading whenever it does an auto-update. While this loading continues, other websites are unresponsive until I force the loading to terminate. This started happening with FF 4.0.1.

    When I do a manual refresh on certain sites like NY Times or CNN, or when sites like NYT periodically push an update through, the updates won't stop loading. It's as though the update never completes. The rotating circle icon on the affected tab just continues indefinitely. While this is happening, other websites that I try to open or update are either very slow or unresponsive.
    My fix has been to force the update to terminate by using the red X button next to the website name. Then other websites respond normally but often the one that I have manually stopped becomes unresponsive.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • My Game Center won't stop loading and won't let me sign in. What do I do?

    My Game Center won't stop loading and won't let me sign in. What do I do?

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Snow Leopard (10.6.8) Web Browser, App Store, iTunes Store image won't finish loading.

    Hello,
    I've recently upgraded from Leopard to Snow Leopard by clean installing. Once I upgraded to Snow Leopard (10.6.3) everything seemed to work perfectly except for the new keyboard that I purchased (requires upgrade to 10.6.8). So as I upgraded to 10.6.8 by "Software Update…".
    Once the update was completed and the machine restarted I've noticed when I opened opened couple of common sites in Safari (such as: Flickr, YouTube, and Amazon) and some of the images won't finish loading with a "?" in the middle where the image would be and browser assumes that the site was done loading. First I thought this was a refresh problem so I hit refresh on the browser but nothing really happened. I thought this was strange so I decided to download Google Chrome and Firefox to try it out as well. Same situation as well… Then I opened  the App Store and iTunes Store and the same things happened there as well. I'm assuming that all these images exists online so anything that access the web to load images will just crap out. One odd thing is that this problem don't seem to happen on any of the sites on Apple when I view it in the web browsers.
    I couldn't figure out the reason so I decided to reinstall Snow Leopard (10.6.3) again by cleaning out the hard drives as before. Once it finished installing I opened up iTunes Store and Safari and the images loads fine. So went ahead (crossing my fingers) to "Software Updates…" to 10.6.8 and the the problem happened again.
    I naively went ahead and tried to clean installing it again, thinking "Third time is the charm!" But same situation once I upgrade to 10.6.8. After the third time I let the browser sit there after it didn't load those images. I waited about five minutes and hit refresh and the images loaded. This happened the same with App Store and iTunes Store images as well. This is very odd because my interment connection hasn't been a changed before I upgraded to 10.6.8. Seems like browsers just cuts off the loading time of the whatever that's lagging instead on that site.
    Is there a solution in the preferences for this or is this some kind of a bug that I'm having with my OS disc or network card? I don't think this has nothing to do with my modem or my interment service because it was working fine before I upgraded to 10.6.8.

    I get that same problem too-you could try checking your network settings, release and renew your IP address, see if that helps. There is a tweaking menu you can get in Firefox that can help somewhat (google Firefox tweaks) but you'd have to raise the hood in FF and tinker a bit, but it does help. How much RAM do you have on your Mac Pro?, also update your Java and shockwave
    sorry I can't be of more help
    Jon B

  • Why WINDOWS 8.1 won't install/load on PC where WIN 8 runs Fine ?

    Why WINDOWS 8.1 won't install/load on PC where WIN 8 runs Fine ?
    As far as System Requirements go, they are the same for WIN 8 and WIN 8.1
    Sympton: 
    Windows 8.1 Installation DVD loads for some time, no circle of dots, then PC reboots
    with quick flash of six lines or so of white text (on black backgound) @ 106 seconds
    Needed to use Smart Phone video camera to capture
    Your PC needs to restart.
    Please hold down the power button ...
    Error Code:0x000000C4
    Parameters:
    0x000...91
    0x000... F
    0xFFFFF800699C5A80
    0x00000000000000000
    0x00000000000000001
    Presumably message is intended for frozen PC, hence 'hold down power button'
    In this case it flashes and re-boots
    Windows 8.1 Image loads quickly, flash and reboots PC, having corrupted boot entry
    (thankfully not other entries in Boot Manager situated on Dell System Reserved Partition)
    PC Desktops affected:
    Dimension 5000 - shipped JAN'05
    RAM 4GB
    Intel Pentium 4 640 3.20Ghz 64bit NX enabled
    ATI Radeon HD 6450
    Dimension 5150c/XPS 200 -shipped MAR'05
    RAM 3GB
    Intel Pentium D 820 2.80Ghz 64bit NX enabled
    Intel 82945G WDDM 1.0
    Both the above PC's Install and run Windows 8 without a hiccup
    Another 'ancient' machine, but unaffected:
    Precision 490 Desktop - shipped OCT'07
    RAM 4GB
    2 x XEON 5365 3.0Ghz
    ATI HD 6450 (Now HD 7750)
    All 8.0 & 8.1 clean Installs and Upgrades on this platform had no problems
    Hope some of you can throw some light on this. What does WIN 8.1 do in the boot
    process that WIN 8 does not?
    And if anybody has encounterd this before...
    Note to multi booters - keep or reinstall Dell or other System Reserved partition (PRI,Active)
    EasyBCD/Windows Boot Manager held on this partition (eg. 350MB)
    If it gets corrupted, you can Restore it, rather than Gigabytes of 1st Primary O/S
    Also, it will solve a lot of problems, when manipulating/adding/backing up/restoring O/S's
    That's it, happy computing...
    Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
    USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

    Fellow user from St. Louis, Missouri pointed in the right direction. I'm grateful
    Thanks for pointing me in the right direction. Running upgrade assistant (going to Store rejects CPU, but no details)
    Results in:
    X You can't install Windows 8.1 because your processor doesn't support LAHF/SAHF.
    X You can't install Windows 8.1 because your processor doesn't support PrefetchW.
    There are at least three Processor requirements that M'soft does not list for WIN 8.1
    and it's fairly well documented, if you ask the right question, eg.:
    http://www.pcworld.com/article/2058683/new-windows-8-1-requirements-strand-some-users-on-windows-8.html
    So that's it, exclusion by 'stealth' - at least M'soft told you that processor required NX - Execute Disable Bit
    for Windows 8
    For Intel units, look out for 'VT-x. Have a processor on the way, but will Motherboard pass CMPXCHG16b test?
    AND PrefetchW AND LAHF/SAHF
    Windows 8 support ends 2015, that means people who bought it will have had 2 years use
    WIN 8.1 Upgrade/Update (sic) is free, but costly if it won't run on your machine
    So, those many people who decried Windows 8 and stuck to WIN 7, were right after all
    Early supporters of WIN 8, have been 'betrayed'
    'Minimum Requirement for Processor 1Ghz - don't make me laugh! (Presumably for Phone 8)
    M'soft have a 'more info' link on System Requirements page, so why not spell it out...
    Otherwise it looks like a PR/Cosmetic exersize
    Not helpful
    Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
    USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

  • Configuration framework system error - the configurable won't be loaded

    Hi, I have followed the tutorial on how to url=https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/Implementing%20Resource%20List%20Filters%20for%20Flexible%20UI%20Navigation/index.htm]Implement a Resource List Filters for Flexible UI Navigation[/url]
    When uploading my par file into the portal, I get following error in the defaulttrace file, although the filter works :
    <i>[synchronizer_(config://install/cm/services/resourcelistfilter)_(source:config://import/install/data/cm/services/resourcelistfilter)] cannot load [(configurable: SimpleTbpResourceListFilter:ResourceListFilter)] : ConfigException: Configuration framework system error: "id consistency error on [SimpleTbpResourceListFilter != SimpleTBPResourceListFilter] : the configurable won't be loaded ! please, check file name..."</i>
    Seems like it's related to the configuration of the .co.xml file. Like in the tutorial I have created this file in location src.config - install - date - cm - services - resourcelistfilter (this folder had to be created manually, not generated by the RF wizard).
    <u><b>_simple_tbp_resource_list_filter.co.xml</b></u>
    <?xml version="1.0"  encoding="UTF-8" ?>
    <!-- file generated by configuration framework 03.03.2005 17:09:00 -->
    <Configurable configclass="ResourceListFilter">
    <property name="classname" value="z.imec.flexsort.filter.SimpleTBPResourceListFilter"/>
    <property name="description" value="A sample implementation of a resource list filter. Filters out documents with TBP Valid From and Valid To properties."/>
    <property name="alias" value="SimpleTBPResourceListFilter"/>
    </Configurable>
    <u><b>configArchive.properties</b></u>
    # com.sap.portal.pdk.srv.config
    ca.name=SimpleTBPResourceListFilter.prjconfig
    ca.version=6.0.1.1
    ca.creation.time=1708
    ca.creation.date=20070425
    ca.creation.user=Kevin Laevers
    ca.creation.machine=unknown
    ca.dependencies: bc.util.prjconfig, bc.sf.prjconfig, bc.sf.service.prjconfig, bc.rf.prjconfig
    cma.name=SimpleTBPResourceListFilter.prjconfig
    cma.version=6.0.1.1
    cma.storage=sfs
    cma.creation.time=1708
    cma.creation.date=20070425
    cma.creation.user=Kevin Laevers
    cma.creation.machine=unknown
    cma.dependencies: bc.util.prjconfig, bc.sf.prjconfig, bc.sf.service.prjconfig, bc.rf.prjconfig
    Any idea on the message in the defaulttrace file?
    Thanks :o)
    Kevin

    Hello,
    Can you please explain what exactly the issue? I'd like to know any issues you are having with the video workflow.
    Thanks,
    Vish

  • My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

    My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

    Deleting the System Preference or other .plist file
    ..Step by Step to fix your Mac

  • Why won't my Load Earlier Messages button appear on my iphone5

    Why won't the Load  Earlier Messages button appear anymore on my iphone5

    Hello Eric.
    Thank you for your Reply. I found out the problem was with the USB cable supplied. I swopped it for a different one and the Colorfly C3 icon appeared on the desktop.
    Dave

  • Why won't itunes load on travelmate 290

    I have an Acer Travelmate 290 and although I can download iTunes on it, it refuses to work properly.
    I cannot sync to it and all the features are not present.
    Can anyone help?
    I'm not a "Techie" so dumb your answers down please.

    "Clydeb77
    Re: Why won't iTunes load on my phone, it just keeps spinning and saying 'Loading'....
    Dec 11, 2013 3:24 PM (in response to 65CES)
    reset all settings"
    Only do this after restarting the device...

  • Flash accidentally got uninstalled from my pc laptop (Chrome), and now won't even load websites so I can't download it.  Can I copy it from my desktop?  Or how do I get it back onto my laptop?

    Flash accidentally got uninstalled from my pc laptop (Chrome), and now it won't even load websites so I can't download it.  Can I copy it from my desktop?  Or how do I get it back onto my laptop?

    Hi micha164,
    I am curious to know how did Flash Player get uninstalled from Chrome? If you can please share steps to reproduce how your Flash Plugin got Removed?
    Also, Can you open chrome application Goto Chrome://plugins and See if Adobe Flash Player Plugin is Disabled? If yes, kindly enable Flash Player Plugin by clicking the [blue colored]enable link and restart the browser to see if the changes have reflected.
    Because Flash Player cannot be uninstalled from Chrome using any uninstaller, as it is embedded part of the app installer/update and can only be removed if you remove the plugin reference from the location on disk. Possibility is that your plugin got disabled and did not get enabled after that.
    Please see if it helps. If the above does not work then the only resolve is to update Chrome app. Please let us know if your query got resolved or not.
    Piyush

Maybe you are looking for