Nginx + fcgirap + spaw-fcgi + multiwatch madness

I'm trying to setup CGit with Nginx, but for this to work I need to setup fcgi support. According to some google results and Arch's wiki this is possible ( https://wiki.archlinux.org/index.php/Ng … ementation ) but I'm having hard time to understand how exactly to setup everything.
I need multiple worker threads, so I need multiwatch and spawn-fcgi (a part from fcgiwrap). 'Step 1' from the Arch wiki article says that I need to enable fcgiwrap.socket, but just a few lines after that (in the multiple worker threads) there is a warning saying that fcgiwrap.socket should be disabled and copied to /etc/systemd/system/
That really confuses me. What's the point of copying it to /etc/systemd/system/ and disabling it?
Has anyone managed to setup proper multiple worker threads cgi support with nginx?
Regards

Similar Messages

  • Nginx + php-fpm problem

    Hello there.
    I just setup nginx with mysql and php-fpm to my archlinux install and i need help.
    i checked all over internet and try every solution, none still work.
    i have a blank page problem
    this is working correctly:
    <?php
    phpinfo();
    ?>
    short tags are enabled and php short tags are also working.
    i try to install phpbb, the install page load, once the install done.. blank page.
    i tryed a working backup of phpbb from my old server.. blank page, same with my phpnuke backup, blank page.
    i tryed chown to root:root and http:http, and chmod rwx for group user and other, i dont think it is a permission problem.
    Probably a little stupid error on my end but i can't find it, i tryed everything.
    my nginx.cong
    #user html;
    worker_processes 1;
    #error_log logs/error.log;
    #error_log logs/error.log notice;
    #error_log logs/error.log info;
    #pid logs/nginx.pid;
    events {
    worker_connections 1024;
    http {
    include mime.types;
    default_type application/octet-stream;
    #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
    # '$status $body_bytes_sent "$http_referer" '
    # '"$http_user_agent" "$http_x_forwarded_for"';
    #access_log logs/access.log main;
    sendfile on;
    #tcp_nopush on;
    #keepalive_timeout 0;
    keepalive_timeout 65;
    #gzip on;
    server {
    listen 80;
    server_name localhost;
    #charset koi8-r;
    #access_log logs/host.access.log main;
    location / {
    root /usr/share/nginx/html;
    index index.html index.htm;
    #error_page 404 /404.html;
    # redirect server error pages to the static page /50x.html
    error_page 500 502 503 504 /50x.html;
    location = /50x.html {
    root /usr/share/nginx/html;
    # proxy the PHP scripts to Apache listening on 127.0.0.1:80
    #location ~ \.php$ {
    # proxy_pass http://127.0.0.1;
    # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
    #location ~ \.php$ {
    # root html;
    # fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
    # fastcgi_index index.php;
    # fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
    # include fastcgi_params;
    # deny access to .htaccess files, if Apache's document root
    # concurs with nginx's one
    #location ~ /\.ht {
    # deny all;
    # another virtual host using mix of IP-, name-, and port-based configuration
    #server {
    # listen 8000;
    # listen somename:8080;
    # server_name somename alias another.alias;
    # location / {
    # root html;
    # index index.html index.htm;
    server {
    listen 80;
    listen clan-ws.net:80;
    server_name clan-ws.net www.clan-ws.net;
    autoindex on;
    root /srv/http/;
    index index.html index.htm index.php;
    location ~ \.php$ {
    #fastcgi_pass 127.0.0.1:9000;
    fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
    fastcgi_index index.php;
    # include fastcgi.conf;
    include fastcgi_params;
    # include /etc/nginx/fastcgi_params;
    # HTTPS server
    #server {
    # listen 443;
    # server_name localhost;
    # ssl on;
    # ssl_certificate cert.pem;
    # ssl_certificate_key cert.key;
    # ssl_session_timeout 5m;
    # ssl_protocols SSLv2 SSLv3 TLSv1;
    # ssl_ciphers HIGH:!aNULL:!MD5;
    # ssl_prefer_server_ciphers on;
    # location / {
    # root html;
    # index index.html index.htm;
    php-fpm.conf
    ; FPM Configuration ;
    ; All relative paths in this configuration file are relative to PHP's install
    ; prefix (/usr). This prefix can be dynamicaly changed by using the
    ; '-p' argument from the command line.
    ; Include one or more files. If glob(3) exists, it is used to include a bunch of
    ; files from a glob(3) pattern. This directive can be used everywhere in the
    ; file.
    ; Relative path can also be used. They will be prefixed by:
    ; - the global prefix if it's been set (-p arguement)
    ; - /usr otherwise
    ;include=/etc/php/fpm.d/*.conf
    ; Global Options ;
    [global]
    ; Pid file
    ; Note: the default prefix is /var
    ; Default Value: none
    pid = /run/php-fpm/php-fpm.pid
    ; Error log file
    ; If it's set to "syslog", log is sent to syslogd instead of being written
    ; in a local file.
    ; Note: the default prefix is /var
    ; Default Value: log/php-fpm.log
    ;error_log = log/php-fpm.log
    ; syslog_facility is used to specify what type of program is logging the
    ; message. This lets syslogd specify that messages from different facilities
    ; will be handled differently.
    ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
    ; Default Value: daemon
    ;syslog.facility = daemon
    ; syslog_ident is prepended to every message. If you have multiple FPM
    ; instances running on the same server, you can change the default value
    ; which must suit common needs.
    ; Default Value: php-fpm
    ;syslog.ident = php-fpm
    ; Log level
    ; Possible Values: alert, error, warning, notice, debug
    ; Default Value: notice
    ;log_level = notice
    ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
    ; interval set by emergency_restart_interval then FPM will restart. A value
    ; of '0' means 'Off'.
    ; Default Value: 0
    ;emergency_restart_threshold = 0
    ; Interval of time used by emergency_restart_interval to determine when
    ; a graceful restart will be initiated. This can be useful to work around
    ; accidental corruptions in an accelerator's shared memory.
    ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;emergency_restart_interval = 0
    ; Time limit for child processes to wait for a reaction on signals from master.
    ; Available units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;process_control_timeout = 0
    ; The maximum number of processes FPM will fork. This has been design to control
    ; the global number of processes when using dynamic PM within a lot of pools.
    ; Use it with caution.
    ; Note: A value of 0 indicates no limit
    ; Default Value: 0
    ; process.max = 128
    ; Specify the nice(2) priority to apply to the master process (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool process will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; process.priority = -19
    ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
    ; Default Value: yes
    ;daemonize = yes
    ; Set open file descriptor rlimit for the master process.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit for the master process.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Specify the event mechanism FPM will use. The following is available:
    ; - select (any POSIX os)
    ; - poll (any POSIX os)
    ; - epoll (linux >= 2.5.44)
    ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
    ; - /dev/poll (Solaris >= 7)
    ; - port (Solaris >= 10)
    ; Default Value: not set (auto detection)
    ;events.mechanism = epoll
    ; When FPM is build with systemd integration, specify the interval,
    ; in second, between health report notification to systemd.
    ; Set to 0 to disable.
    ; Available Units: s(econds), m(inutes), h(ours)
    ; Default Unit: seconds
    ; Default value: 10
    ;systemd_interval = 10
    ; Pool Definitions ;
    ; Multiple pools of child processes may be started with different listening
    ; ports and different management options. The name of the pool will be
    ; used in logs and stats. There is no limitation on the number of pools which
    ; FPM can handle. Your system will tell you anyway :)
    ; Start a new pool named 'www'.
    ; the variable $pool can we used in any directive and will be replaced by the
    ; pool name ('www' here)
    [www]
    ; Per pool prefix
    ; It only applies on the following directives:
    ; - 'slowlog'
    ; - 'listen' (unixsocket)
    ; - 'chroot'
    ; - 'chdir'
    ; - 'php_values'
    ; - 'php_admin_values'
    ; When not set, the global prefix (or /usr) applies instead.
    ; Note: This directive can also be relative to the global prefix.
    ; Default Value: none
    ;prefix = /path/to/pools/$pool
    ; Unix user/group of processes
    ; Note: The user is mandatory. If the group is not set, the default user's group
    ; will be used.
    user = http
    group = http
    ; The address on which to accept FastCGI requests.
    ; Valid syntaxes are:
    ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
    ; a specific port;
    ; 'port' - to listen on a TCP socket to all addresses on a
    ; specific port;
    ; '/path/to/unix/socket' - to listen on a unix socket.
    ; Note: This value is mandatory.
    ;listen = 127.0.0.1:9000
    listen = /run/php-fpm/php-fpm.sock
    ; Set listen(2) backlog.
    ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
    ;listen.backlog = 128
    ; Set permissions for unix socket, if one is used. In Linux, read/write
    ; permissions must be set in order to allow connections from a web server. Many
    ; BSD-derived systems allow connections regardless of permissions.
    ; Default Values: user and group are set as the running user
    ; mode is set to 0666
    listen.owner = http
    listen.group = http
    listen.mode = 0660
    ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
    ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
    ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
    ; must be separated by a comma. If this value is left blank, connections will be
    ; accepted from any ip address.
    ; Default Value: any
    ;listen.allowed_clients = 127.0.0.1
    ; Specify the nice(2) priority to apply to the pool processes (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool processes will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; priority = -19
    ; Choose how the process manager will control the number of child processes.
    ; Possible Values:
    ; static - a fixed number (pm.max_children) of child processes;
    ; dynamic - the number of child processes are set dynamically based on the
    ; following directives. With this process management, there will be
    ; always at least 1 children.
    ; pm.max_children - the maximum number of children that can
    ; be alive at the same time.
    ; pm.start_servers - the number of children created on startup.
    ; pm.min_spare_servers - the minimum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is less than this
    ; number then some children will be created.
    ; pm.max_spare_servers - the maximum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is greater than this
    ; number then some children will be killed.
    ; ondemand - no children are created at startup. Children will be forked when
    ; new requests will connect. The following parameter are used:
    ; pm.max_children - the maximum number of children that
    ; can be alive at the same time.
    ; pm.process_idle_timeout - The number of seconds after which
    ; an idle process will be killed.
    ; Note: This value is mandatory.
    pm = dynamic
    ; The number of child processes to be created when pm is set to 'static' and the
    ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
    ; This value sets the limit on the number of simultaneous requests that will be
    ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
    ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
    ; CGI. The below defaults are based on a server without much resources. Don't
    ; forget to tweak pm.* to fit your needs.
    ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
    ; Note: This value is mandatory.
    pm.max_children = 5
    ; The number of child processes created on startup.
    ; Note: Used only when pm is set to 'dynamic'
    ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
    pm.start_servers = 2
    ; The desired minimum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.min_spare_servers = 1
    ; The desired maximum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.max_spare_servers = 3
    ; The number of seconds after which an idle process will be killed.
    ; Note: Used only when pm is set to 'ondemand'
    ; Default Value: 10s
    ;pm.process_idle_timeout = 10s;
    ; The number of requests each child process should execute before respawning.
    ; This can be useful to work around memory leaks in 3rd party libraries. For
    ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
    ; Default Value: 0
    ;pm.max_requests = 500
    ; The URI to view the FPM status page. If this value is not set, no URI will be
    ; recognized as a status page. It shows the following informations:
    ; pool - the name of the pool;
    ; process manager - static, dynamic or ondemand;
    ; start time - the date and time FPM has started;
    ; start since - number of seconds since FPM has started;
    ; accepted conn - the number of request accepted by the pool;
    ; listen queue - the number of request in the queue of pending
    ; connections (see backlog in listen(2));
    ; max listen queue - the maximum number of requests in the queue
    ; of pending connections since FPM has started;
    ; listen queue len - the size of the socket queue of pending connections;
    ; idle processes - the number of idle processes;
    ; active processes - the number of active processes;
    ; total processes - the number of idle + active processes;
    ; max active processes - the maximum number of active processes since FPM
    ; has started;
    ; max children reached - number of times, the process limit has been reached,
    ; when pm tries to start more children (works only for
    ; pm 'dynamic' and 'ondemand');
    ; Value are updated in real time.
    ; Example output:
    ; pool: www
    ; process manager: static
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 62636
    ; accepted conn: 190460
    ; listen queue: 0
    ; max listen queue: 1
    ; listen queue len: 42
    ; idle processes: 4
    ; active processes: 11
    ; total processes: 15
    ; max active processes: 12
    ; max children reached: 0
    ; By default the status page output is formatted as text/plain. Passing either
    ; 'html', 'xml' or 'json' in the query string will return the corresponding
    ; output syntax. Example:
    ; http://www.foo.bar/status
    ; http://www.foo.bar/status?json
    ; http://www.foo.bar/status?html
    ; http://www.foo.bar/status?xml
    ; By default the status page only outputs short status. Passing 'full' in the
    ; query string will also return status for each pool process.
    ; Example:
    ; http://www.foo.bar/status?full
    ; http://www.foo.bar/status?json&full
    ; http://www.foo.bar/status?html&full
    ; http://www.foo.bar/status?xml&full
    ; The Full status returns for each process:
    ; pid - the PID of the process;
    ; state - the state of the process (Idle, Running, ...);
    ; start time - the date and time the process has started;
    ; start since - the number of seconds since the process has started;
    ; requests - the number of requests the process has served;
    ; request duration - the duration in µs of the requests;
    ; request method - the request method (GET, POST, ...);
    ; request URI - the request URI with the query string;
    ; content length - the content length of the request (only with POST);
    ; user - the user (PHP_AUTH_USER) (or '-' if not set);
    ; script - the main script called (or '-' if not set);
    ; last request cpu - the %cpu the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because CPU calculation is done when the request
    ; processing has terminated;
    ; last request memory - the max amount of memory the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because memory calculation is done when the request
    ; processing has terminated;
    ; If the process is in Idle state, then informations are related to the
    ; last request the process has served. Otherwise informations are related to
    ; the current request being served.
    ; Example output:
    ; pid: 31330
    ; state: Running
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 63087
    ; requests: 12808
    ; request duration: 1250261
    ; request method: GET
    ; request URI: /test_mem.php?N=10000
    ; content length: 0
    ; user: -
    ; script: /home/fat/web/docs/php/test_mem.php
    ; last request cpu: 0.00
    ; last request memory: 0
    ; Note: There is a real-time FPM status monitoring sample web page available
    ; It's available in: ${prefix}/share/fpm/status.html
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;pm.status_path = /status
    ; The ping URI to call the monitoring page of FPM. If this value is not set, no
    ; URI will be recognized as a ping page. This could be used to test from outside
    ; that FPM is alive and responding, or to
    ; - create a graph of FPM availability (rrd or such);
    ; - remove a server from a group if it is not responding (load balancing);
    ; - trigger alerts for the operating team (24/7).
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;ping.path = /ping
    ; This directive may be used to customize the response of a ping request. The
    ; response is formatted as text/plain with a 200 response code.
    ; Default Value: pong
    ;ping.response = pong
    ; The access log file
    ; Default: not set
    ;access.log = log/$pool.access.log
    ; The access log format.
    ; The following syntax is allowed
    ; %%: the '%' character
    ; %C: %CPU used by the request
    ; it can accept the following format:
    ; - %{user}C for user CPU only
    ; - %{system}C for system CPU only
    ; - %{total}C for user + system CPU (default)
    ; %d: time taken to serve the request
    ; it can accept the following format:
    ; - %{seconds}d (default)
    ; - %{miliseconds}d
    ; - %{mili}d
    ; - %{microseconds}d
    ; - %{micro}d
    ; %e: an environment variable (same as $_ENV or $_SERVER)
    ; it must be associated with embraces to specify the name of the env
    ; variable. Some exemples:
    ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
    ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
    ; %f: script filename
    ; %l: content-length of the request (for POST request only)
    ; %m: request method
    ; %M: peak of memory allocated by PHP
    ; it can accept the following format:
    ; - %{bytes}M (default)
    ; - %{kilobytes}M
    ; - %{kilo}M
    ; - %{megabytes}M
    ; - %{mega}M
    ; %n: pool name
    ; %o: ouput header
    ; it must be associated with embraces to specify the name of the header:
    ; - %{Content-Type}o
    ; - %{X-Powered-By}o
    ; - %{Transfert-Encoding}o
    ; %p: PID of the child that serviced the request
    ; %P: PID of the parent of the child that serviced the request
    ; %q: the query string
    ; %Q: the '?' character if query string exists
    ; %r: the request URI (without the query string, see %q and %Q)
    ; %R: remote IP address
    ; %s: status (response code)
    ; %t: server time the request was received
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %T: time the log has been written (the request has finished)
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %u: remote user
    ; Default: "%R - %u %t \"%m %r\" %s"
    ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
    ; The log file for slow requests
    ; Default Value: not set
    ; Note: slowlog is mandatory if request_slowlog_timeout is set
    ;slowlog = log/$pool.log.slow
    ; The timeout for serving a single request after which a PHP backtrace will be
    ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_slowlog_timeout = 0
    ; The timeout for serving a single request after which the worker process will
    ; be killed. This option should be used when the 'max_execution_time' ini option
    ; does not stop script execution for some reason. A value of '0' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_terminate_timeout = 0
    ; Set open file descriptor rlimit.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Chroot to this directory at the start. This value must be defined as an
    ; absolute path. When this value is not set, chroot is not used.
    ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
    ; of its subdirectories. If the pool prefix is not set, the global prefix
    ; will be used instead.
    ; Note: chrooting is a great security feature and should be used whenever
    ; possible. However, all PHP paths will be relative to the chroot
    ; (error_log, sessions.save_path, ...).
    ; Default Value: not set
    ;chroot =
    ; Chdir to this directory at the start.
    ; Note: relative path can be used.
    ; Default Value: current directory or / when chroot
    ;chdir = /srv/http
    ; Redirect worker stdout and stderr into main error log. If not set, stdout and
    ; stderr will be redirected to /dev/null according to FastCGI specs.
    ; Note: on highloaded environement, this can cause some delay in the page
    ; process time (several ms).
    ; Default Value: no
    ;catch_workers_output = yes
    ; Limits the extensions of the main script FPM will allow to parse. This can
    ; prevent configuration mistakes on the web server side. You should only limit
    ; FPM to .php extensions to prevent malicious users to use other extensions to
    ; exectute php code.
    ; Note: set an empty value to allow all extensions.
    ; Default Value: .php
    ;security.limit_extensions = .php .php3 .php4 .php5
    ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
    ; the current environment.
    ; Default Value: clean env
    ;env[HOSTNAME] = $HOSTNAME
    ;env[PATH] = /usr/local/bin:/usr/bin:/bin
    ;env[TMP] = /tmp
    ;env[TMPDIR] = /tmp
    ;env[TEMP] = /tmp
    ; Additional php.ini defines, specific to this pool of workers. These settings
    ; overwrite the values previously defined in the php.ini. The directives are the
    ; same as the PHP SAPI:
    ; php_value/php_flag - you can set classic ini defines which can
    ; be overwritten from PHP call 'ini_set'.
    ; php_admin_value/php_admin_flag - these directives won't be overwritten by
    ; PHP call 'ini_set'
    ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
    ; Defining 'extension' will load the corresponding shared extension from
    ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
    ; overwrite previously defined php.ini values, but will append the new value
    ; instead.
    ; Note: path INI options can be relative and will be expanded with the prefix
    ; (pool, global or /usr)
    ; Default Value: nothing is defined by default except the values in php.ini and
    ; specified at startup with the -d argument
    ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
    ;php_flag[display_errors] = off
    ;php_admin_value[error_log] = /var/log/fpm-php.www.log
    ;php_admin_flag[log_errors] = on
    ;php_admin_value[memory_limit] = 32M
    php.ini
    [PHP]
    ; About php.ini ;
    ; PHP's initialization file, generally called php.ini, is responsible for
    ; configuring many of the aspects of PHP's behavior.
    ; PHP attempts to find and load this configuration from a number of locations.
    ; The following is a summary of its search order:
    ; 1. SAPI module specific location.
    ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
    ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
    ; 4. Current working directory (except CLI)
    ; 5. The web server's directory (for SAPI modules), or directory of PHP
    ; (otherwise in Windows)
    ; 6. The directory from the --with-config-file-path compile time option, or the
    ; Windows directory (C:\windows or C:\winnt)
    ; See the PHP docs for more specific information.
    ; http://php.net/configuration.file
    ; The syntax of the file is extremely simple. Whitespace and lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives following the section heading [PATH=/www/mysite] only
    ; apply to PHP files in the /www/mysite directory. Directives
    ; following the section heading [HOST=www.example.com] only apply to
    ; PHP files served from www.example.com. Directives set in these
    ; special sections cannot be overridden by user-defined INI files or
    ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
    ; CGI/FastCGI.
    ; http://php.net/ini.sections
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; Directives are variables used to configure PHP or PHP extensions.
    ; There is no name validation. If PHP can't find an expected
    ; directive because it is not set or is mistyped, a default value will be used.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
    ; previously set variable or directive (e.g. ${foo})
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; ^ bitwise XOR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = None ; sets foo to an empty string
    ; foo = "None" ; sets foo to the string 'None'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; PHP comes packaged with two INI files. One that is recommended to be used
    ; in production environments and one that is recommended to be used in
    ; development environments.
    ; php.ini-production contains settings which hold security, performance and
    ; best practices at its core. But please be aware, these settings may break
    ; compatibility with older or less security conscience applications. We
    ; recommending using the production ini in production and testing environments.
    ; php.ini-development is very similar to its production variant, except it's
    ; much more verbose when it comes to errors. We recommending using the
    ; development version only in development environments as errors shown to
    ; application users can inadvertently leak otherwise secure information.
    ; Quick Reference ;
    ; The following are all the settings which are different in either the production
    ; or development versions of the INIs with respect to PHP's default behavior.
    ; Please see the actual settings later in the document for more details as to why
    ; we recommend these changes in PHP's behavior.
    ; display_errors
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; display_startup_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; error_reporting
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; html_errors
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; log_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; max_input_time
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; output_buffering
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; register_argc_argv
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; request_order
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; session.bug_compat_42
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.bug_compat_warn
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.gc_divisor
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; session.hash_bits_per_character
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; short_open_tag
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; track_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; url_rewriter.tags
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; variables_order
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS"
    ; php.ini Options ;
    ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
    ;user_ini.filename = ".user.ini"
    ; To disable this feature set this option to empty value
    ;user_ini.filename =
    ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
    ;user_ini.cache_ttl = 300
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    ; http://php.net/engine
    engine = On
    ; This directive determines whether or not PHP will recognize code between
    ; <? and ?> tags as PHP source which should be processed as such. It's been
    ; recommended for several years that you not use the short tag "short cut" and
    ; instead to use the full <?php and ?> tag combination. With the wide spread use
    ; of XML and use of these tags by other languages, the server can become easily
    ; confused and end up parsing the wrong code in the wrong context. But because
    ; this short cut has been a feature for such a long time, it's currently still
    ; supported for backwards compatibility, but we recommend you don't use them.
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/short-open-tag
    short_open_tag = On
    ; Allow ASP-style <% %> tags.
    ; http://php.net/asp-tags
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    ; http://php.net/precision
    precision = 14
    ; Output buffering is a mechanism for controlling how much output data
    ; (excluding headers and cookies) PHP should keep internally before pushing that
    ; data to the client. If your application's output exceeds this setting, PHP
    ; will send that data in chunks of roughly the size you specify.
    ; Turning on this setting and managing its maximum buffer size can yield some
    ; interesting side-effects depending on your application and web server.
    ; You may be able to send headers and cookies after you've already sent output
    ; through print or echo. You also may see performance benefits if your server is
    ; emitting less packets due to buffered output versus PHP streaming the output
    ; as it gets it. On production servers, 4096 bytes is a good setting for performance
    ; reasons.
    ; Note: Output buffering can also be controlled via Output Buffering Control
    ; functions.
    ; Possible Values:
    ; On = Enabled and buffer is unlimited. (Use with caution)
    ; Off = Disabled
    ; Integer = Enables the buffer and sets its maximum size in bytes.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; http://php.net/output-buffering
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ; http://php.net/output-handler
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    ; http://php.net/zlib.output-compression
    zlib.output_compression = Off
    ; http://php.net/zlib.output-compression-level
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ; http://php.net/zlib.output-handler
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    ; http://php.net/implicit-flush
    ; Note: This directive is hardcoded to On for the CLI SAPI
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated. A warning appears if the specified function is
    ; not defined, or if the function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func =
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 17
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/open-basedir
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-functions
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-classes
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ; http://php.net/syntax-highlighting
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long requests, which may end up
    ; being interrupted by the user or a browser timing out. PHP's default behavior
    ; is to disable this feature.
    ; http://php.net/ignore-user-abort
    ;ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; http://php.net/realpath-cache-size
    ;realpath_cache_size = 16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; http://php.net/realpath-cache-ttl
    ;realpath_cache_ttl = 120
    ; Enables or disables the circular reference collector.
    ; http://php.net/zend.enable-gc
    zend.enable_gc = On
    ; If enabled, scripts may be written in encodings that are incompatible with
    ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
    ; encodings. To use this feature, mbstring extension must be enabled.
    ; Default: Off
    ;zend.multibyte = Off
    ; Allows to set the default encoding for the scripts. This value will be used
    ; unless "declare(encoding=...)" directive appears at the top of the script.
    ; Only affects if zend.multibyte is set.
    ; Default: ""
    ;zend.script_encoding =
    ; Miscellaneous ;
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    ; http://php.net/expose-php
    expose_php = On
    ; Resource Limits ;
    ; Maximum execution time of each script, in seconds
    ; http://php.net/max-execution-time
    ; Note: This directive is hardcoded to 0 for the CLI SAPI
    max_execution_time = 30
    ; Maximum amount of time each script may spend parsing request data. It's a good
    ; idea to limit this time on productions servers in order to eliminate unexpectedly
    ; long running scripts.
    ; Note: This directive is hardcoded to -1 for the CLI SAPI
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; http://php.net/max-input-time
    max_input_time = 60
    ; Maximum input variable nesting level
    ; http://php.net/max-input-nesting-level
    ;max_input_nesting_level = 64
    ; How many GET/POST/COOKIE input variables may be accepted
    ; max_input_vars = 1000
    ; Maximum amount of memory a script may consume (128MB)
    ; http://php.net/memory-limit
    memory_limit = 128M
    ; Error handling and logging ;
    ; This directive informs PHP of which errors, warnings and notices you would like
    ; it to take action for. The recommended way of setting values for this
    ; directive is through the use of the error level constants and bitwise
    ; operators. The error level constants are below here for convenience as well as
    ; some common settings and their meanings.
    ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
    ; those related to E_NOTICE and E_STRICT, which together cover best practices and
    ; recommended coding standards in PHP. For performance reasons, this is the
    ; recommend error reporting setting. Your production server shouldn't be wasting
    ; resources complaining about best practices and coding standards. That's what
    ; development servers and development settings are for.
    ; Note: The php.ini-development file has this setting as E_ALL. This
    ; means it pretty much reports everything which is exactly what you want during
    ; development and early testing.
    ; Error Level Constants:
    ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; E_DEPRECATED - warn about code that will not work in future versions
    ; of PHP
    ; E_USER_DEPRECATED - user-generated deprecation warnings
    ; Common Values:
    ; E_ALL (Show all errors, warnings and notices including coding standards.)
    ; E_ALL & ~E_NOTICE (Show all errors, except for notices)
    ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
    ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; http://php.net/error-reporting
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; This directive controls whether or not and where PHP will output errors,
    ; notices and warnings too. Error output is very useful during development, but
    ; it could be very dangerous in production environments. Depending on the code
    ; which is triggering the error, sensitive information could potentially leak
    ; out of your application such as database usernames and passwords or worse.
    ; It's recommended that errors be logged on production servers rather than
    ; having the errors sent to STDOUT.
    ; Possible Values:
    ; Off = Do not display any errors
    ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout = Display errors to STDOUT
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-errors
    display_errors = Off
    ; The display of errors which occur during PHP's startup sequence are handled
    ; separately from display_errors. PHP's default behavior is to suppress those
    ; errors from clients. Turning the display of startup errors on can be useful in
    ; debugging configuration problems. But, it's strongly recommended that you
    ; leave this setting off on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-startup-errors
    display_startup_errors = Off
    ; Besides displaying errors, PHP can also log errors to locations such as a
    ; server-specific log, STDERR, or a location specified by the error_log
    ; directive found below. While errors should not be displayed on productions
    ; servers they should still be monitored and logging is a great way to do that.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/log-errors
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    ; http://php.net/log-errors-max-len
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ; http://php.net/ignore-repeated-errors
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ; http://php.net/ignore-repeated-source
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    ; http://php.net/report-memleaks
    report_memleaks = On
    ; This setting is on by default.
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
    ; to On can assist in debugging and is appropriate for development servers. It should
    ; however be disabled on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/track-errors
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ; http://php.net/xmlrpc-errors
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; When PHP displays or logs an error, it has the capability of formatting the
    ; error message as HTML for easier reading. This directive controls whether
    ; the error message is formatted as HTML or not.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; http://php.net/html-errors
    html_errors = On
    ; If html_errors is set to On *and* docref_root is not empty, then PHP
    ; produces clickable error messages that direct to a page describing the error
    ; or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://php.net/docs
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot. PHP's default behavior is to leave these settings empty, in which
    ; case no links to documentation are generated.
    ; Note: Never use this feature for production boxes.
    ; http://php.net/docref-root
    ; Examples
    ;docref_root = "/phpmanual/"
    ; http://php.net/docref-ext
    ;docref_ext = .html
    ; String to output before an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-prepend-string
    ; Example:
    ;error_prepend_string = "<span style='color: #ff0000'>"
    ; String to output after an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-append-string
    ; Example:
    ;error_append_string = "</span>"
    ; Log errors to specified file. PHP's default behavior is to leave this value
    ; empty.
    ; http://php.net/error-log
    ; Example:
    ;error_log = php_errors.log
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ;windows.show_crt_warning
    ; Default value: 0
    ; Development value: 0
    ; Production value: 0
    ; Data Handling ;
    ; The separator used in PHP generated URLs to separate arguments.
    ; PHP's default setting is "&".
    ; http://php.net/arg-separator.output
    ; Example:
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; PHP's default setting is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ; http://php.net/arg-separator.input
    ; Example:
    ;arg_separator.input = ";&"
    ; This directive determines which super global arrays are registered when PHP
    ; starts up. G,P,C,E & S are abbreviations for the following respective super
    ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
    ; paid for the registration of these arrays and because ENV is not as commonly
    ; used as the others, ENV is not recommended on productions servers. You
    ; can still get access to the environment variables through getenv() should you
    ; need to.
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS";
    ; http://php.net/variables-order
    variables_order = "GPCS"
    ; This directive determines which super global data (G,P,C,E & S) should
    ; be registered into the super global array REQUEST. If so, it also determines
    ; the order in which that data is registered. The values for this directive are
    ; specified in the same manner as the variables_order directive, EXCEPT one.
    ; Leaving this value empty will cause PHP to use the value set in the
    ; variables_order directive. It does not mean it will leave the super globals
    ; array REQUEST empty.
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; http://php.net/request-order
    request_order = "GP"
    ; This directive determines whether PHP registers $argv & $argc each time it
    ; runs. $argv contains an array of all the arguments passed to PHP when a script
    ; is invoked. $argc contains an integer representing the number of arguments
    ; that were passed when the script was invoked. These arrays are extremely
    ; useful when running scripts from the command line. When this directive is
    ; enabled, registering these variables consumes CPU cycles and memory each time
    ; a script is executed. For performance reasons, this feature should be disabled
    ; on production servers.
    ; Note: This directive is hardcoded to On for the CLI SAPI
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/register-argc-argv
    register_argc_argv = Off
    ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
    ; first used (Just In Time) instead of when the script starts. If these
    ; variables are not used within a script, having this directive on will result
    ; in a performance gain. The PHP directive register_argc_argv must be disabled
    ; for this directive to have any affect.
    ; http://php.net/auto-globals-jit
    auto_globals_jit = On
    ; Whether PHP will read the POST data.
    ; This option is enabled by default.
    ; Most likely, you won't want to disable this option globally. It causes $_POST
    ; and $_FILES to always be empty; the only way you will be able to read the
    ; POST data will be through the php://input stream wrapper. This can be useful
    ; to proxy requests or to process the POST data in a memory efficient fashion.
    ; http://php.net/enable-post-data-reading
    ;enable_post_data_reading = Off
    ; Maximum size of POST data that PHP will accept.
    ; Its value may be 0 to disable the limit. It is ignored if POST data reading
    ; is disabled through enable_post_data_reading.
    ; http://php.net/post-max-size
    post_max_size = 8M
    ; Automatically add files before PHP document.
    ; http://php.net/auto-prepend-file
    auto_prepend_file =
    ; Automatically add files after PHP document.
    ; http://php.net/auto-append-file
    auto_append_file =
    ; By default, PHP will output a character encoding using
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    ; http://php.net/default-mimetype
    default_mimetype = "text/html"
    ; PHP's default character set is set to empty.
    ; http://php.net/default-charset
    ;default_charset = "UTF-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
    ; to disable this feature. If post reading is disabled through
    ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
    ; http://php.net/always-populate-raw-post-data
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; PHP's default setting for include_path is ".;/path/to/php/pear"
    ; http://php.net/include-path
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    ; http://php.net/doc-root
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    ; http://php.net/user-dir
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ; http://php.net/extension-dir
    extension_dir = "/usr/lib/php/modules/"
    ; On windows:
    ; extension_dir = "ext"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    ; http://php.net/enable-dl
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; http://php.net/cgi.force-redirect
    ;cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request. PHP's default behavior is to disable this feature.
    ;cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; http://php.net/cgi.redirect-status-env
    ;cgi.redirect_status_env =
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; http://php.net/cgi.fix-pathinfo
    ;cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; http://php.net/fastcgi.impersonate
    ;fastcgi.impersonate = 1
    ; Disable logging through FastCGI connection. PHP's default behavior is to enable
    ; this feature.
    ;fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ; http://php.net/cgi.rfc2616-headers
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    ; http://php.net/file-uploads
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ; http://php.net/upload-tmp-dir
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    ; http://php.net/upload-max-filesize
    upload_max_filesize = 2M
    ; Maximum number of files that can be uploaded via a single request
    max_file_uploads = 20
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-fopen
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-include
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address). PHP's default setting
    ; for this is empty.
    ; http://php.net/from
    ;from="[email protected]"
    ; Define the User-Agent string. PHP's default setting for this is empty.
    ; http://php.net/user-agent
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    ; http://php.net/default-socket-timeout
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; http://php.net/auto-detect-line-endings
    ;auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; ... or with a path:
    ; extension=/path/to/extension/msql.so
    ; If you only provide the name of the extension, PHP will look for it in its
    ; default extension directory.
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=dba.so
    ;extension=enchant.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=intl.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mssql.so
    ;extension=mysqli.so
    ;extension=mysql.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=phar.so
    ;extension=posix.so
    ;extension=pspell.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite3.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    ; Module Settings ;
    [CLI Server]
    ; Whether the CLI web server uses ANSI color coding in its terminal output.
    cli_server.color = On
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    ;date.timezone =
    ; http://php.net/date.default-latitude
    ;date.default_latitude = 31.7667
    ; http://php.net/date.default-longitude
    ;date.default_longitude = 35.2333
    ; http://php.net/date.sunrise-zenith
    ;date.sunrise_zenith = 90.583333
    ; http://php.net/date.sunset-zenith
    ;date.sunset_zenith = 90.583333
    [filter]
    ; http://php.net/filter.default
    ;filter.default = unsafe_raw
    ; http://php.net/filter.default-flags
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [intl]
    ;intl.default_locale =
    ; This directive allows you to produce PHP errors when some error
    ; happens within intl functions. The value is the level of the error produced.
    ; Default is 0, which does not produce any errors.
    ;intl.error_level = E_WARNING
    [sqlite]
    ; http://php.net/sqlite.assoc-case
    ;sqlite.assoc_case = 0
    [sqlite3]
    ;sqlite3.extension_dir =
    [Pcre]
    ;PCRE library backtracking limit.
    ; http://php.net/pcre.backtrack-limit
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ; http://php.net/pcre.recursion-limit
    ;pcre.recursion_limit=100000
    [Pdo]
    ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
    ; http://php.net/pdo-odbc.connection-pooling
    ;pdo_odbc.connection_pooling=strict
    ;pdo_odbc.db2_instance_name
    [Pdo_mysql]
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/pdo_mysql.cache_size
    pdo_mysql.cache_size = 2000
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/pdo_mysql.default-socket
    pdo_mysql.default_socket=
    [Phar]
    ; http://php.net/phar.readonly
    ;phar.readonly = On
    ; http://php.net/phar.require-hash
    ;phar.require_hash = On
    ;phar.cache_list =
    [mail function]
    ; For Win32 only.
    ; http://php.net/smtp
    SMTP = localhost
    ; http://php.net/smtp-port
    smtp_port = 25
    ; For Win32 only.
    ; http://php.net/sendmail-from
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ; http://php.net/sendmail-path
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
    mail.add_x_header = On
    ; The path to a log file that will log all mail() calls. Log entries include
    ; the full path of the script, line number, To address and headers.
    ;mail.log =
    ; Log mail to syslog (Event Log on NT, not valid in Windows 95).
    ;mail.log = syslog
    [SQL]
    ; http://php.net/sql.safe-mode
    sql.safe_mode = Off
    [ODBC]
    ; http://php.net/odbc.default-db
    ;odbc.default_db = Not yet implemented
    ; http://php.net/odbc.default-user
    ;odbc.default_user = Not yet implemented
    ; http://php.net/odbc.default-pw
    ;odbc.default_pw = Not yet implemented
    ; Controls the ODBC cursor model.
    ; Default: SQL_CURSOR_STATIC (default).
    ;odbc.default_cursortype
    ; Allow or prevent persistent links.
    ; http://php.net/odbc.allow-persistent
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    ; http://php.net/odbc.check-persistent
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/odbc.max-persistent
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/odbc.max-links
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    ; http://php.net/odbc.defaultlrl
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of odbc.defaultlrl and odbc.defaultbinmode
    ; http://php.net/odbc.defaultbinmode
    odbc.defaultbinmode = 1
    ;birdstep.max_links = -1
    [Interbase]
    ; Allow or prevent persistent links.
    ibase.allow_persistent = 1
    ; Maximum number of persistent links. -1 means no limit.

    rune0077 wrote:
    Try this solution:
    https://wiki.archlinux.org/index.php/Ng … gh_FastCGI
    That isn't exactly my problem. The server responds with no body (so no blank html document)
    root@server ~# curl -vH "Host: ███████" localhost/test.php
    * Hostname was NOT found in DNS cache
    * Trying ::1...
    * connect to ::1 port 80 failed: Connection refused
    * Trying 127.0.0.1...
    * Connected to localhost (127.0.0.1) port 80 (#0)
    > GET /test.php HTTP/1.1
    > User-Agent: curl/7.36.0
    > Accept: */*
    > Host: ███████████
    >
    < HTTP/1.1 200 OK
    * Server nginx/1.6.0 is not blacklisted
    < Server: nginx/1.6.0
    < Date: Tue, 20 May 2014 20:11:02 GMT
    < Content-Type: text/html
    < Transfer-Encoding: chunked
    < Connection: keep-alive
    < Vary: Accept-Encoding
    <
    * Connection #0 to host localhost left intact
    When I do set SCRIPT_FILENAME to $document_root$fastcgi_script_name, it responds with "No input file specified."
    Spider.007 wrote:If there are no errors; tell us what your access-logs tell. Enable them in fpm and tell us if the request ends up there. Also; nginx can also log the upstream ip-address; if you add that to the access-logs you'll at least know if the problem is nginx, or fpm
    The nginx log message:
    127.0.0.1 - - [20/May/2014:14:15:50 -0600] "GET /test.php HTTP/1.1" 200 5 "-" "curl/7.36.0"
    I'll try to find a way to make php-fpm more verbose and I'll edit this post with the error when I do. At the moment it's only logging startups/shutdowns.
    Last edited by phillips1012 (2014-05-20 20:23:40)

  • Nginx with php-fpm, connection with php-fpm.sock failed

    I am feeling stumped, trying to setup NGINX for the first time on Arch. Followed the wiki a few times and keep getting hung up in the same spot. I followed the instructions to install NGINX in a chroot, then went on to setup php-fpm. I have not tried setting up any sites, just trying to get to the point of showing the "it works" page, before I moved to setting up a site.
    The error I am getting on the page
    Sorry, the page you are looking for is currently unavailable.
    Please try again later.
    error in log
    2013/03/07 13:04:05 [crit] 1868#0: *1 connect() to unix:/run/php-fpm/php-fpm.sock failed (2: No such file or directory) while connecting to upstream, client: MYIP, server: SERVERIP, request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/run/php-fpm/php-fpm.sock:", host: "SERVERIP"
    SERVERIP: is the IP of the server and shows properly in the log, same with MYIP
    Here are my configs
    /srv/http/etc/nginx.conf
    #user http;
    worker_processes 1;
    #error_log logs/error.log;
    #error_log logs/error.log notice;
    #error_log logs/error.log info;
    #pid logs/nginx.pid;
    events {
    worker_connections 1024;
    http {
    include mime.types;
    default_type application/octet-stream;
    #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
    # '$status $body_bytes_sent "$http_referer" '
    # '"$http_user_agent" "$http_x_forwarded_for"';
    #access_log logs/access.log main;
    sendfile on;
    #tcp_nopush on;
    #keepalive_timeout 0;
    keepalive_timeout 65;
    #gzip on;
    server {
    listen 80;
    server_name SERVERIP;
    include fpm.conf;
    #charset koi8-r;
    #access_log logs/host.access.log main;
    location / {
    root /usr/share/nginx/html;
    index index.html index.htm;
    #error_page 404 /404.html;
    # redirect server error pages to the static page /50x.html
    error_page 500 502 503 504 /50x.html;
    location = /50x.html {
    root /usr/share/nginx/html;
    # proxy the PHP scripts to Apache listening on 127.0.0.1:80
    #location ~ \.php$ {
    # proxy_pass http://127.0.0.1;
    # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
    #location ~ \.php$ {
    # root html;
    # fastcgi_pass 127.0.0.1:9000;
    # fastcgi_index index.php;
    # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
    # include fastcgi_params;
    # deny access to .htaccess files, if Apache's document root
    # concurs with nginx's one
    #location ~ /\.ht {
    # deny all;
    # another virtual host using mix of IP-, name-, and port-based configuration
    #server {
    # listen 8000;
    # listen somename:8080;
    # server_name somename alias another.alias;
    # location / {
    # root html;
    # index index.html index.htm;
    # HTTPS server
    #server {
    # listen 443;
    # server_name localhost;
    # ssl on;
    # ssl_certificate cert.pem;
    # ssl_certificate_key cert.key;
    # ssl_session_timeout 5m;
    # ssl_protocols SSLv2 SSLv3 TLSv1;
    # ssl_ciphers HIGH:!aNULL:!MD5;
    # ssl_prefer_server_ciphers on;
    # location / {
    # root html;
    # index index.html index.htm;
    /srv/http/etc/nginx/fpm.conf  - this is the file in the wiki that says php.conf
    location ~ \.(php|html|htm)$ {
    fastcgi_pass unix:/run/php-fpm/php-fpm.sock;
    fastcgi_index index.php;
    include fastcgi.conf;
    /etc/php/php-fpm.conf
    ; FPM Configuration ;
    ; All relative paths in this configuration file are relative to PHP's install
    ; prefix (/usr). This prefix can be dynamicaly changed by using the
    ; '-p' argument from the command line.
    ; Include one or more files. If glob(3) exists, it is used to include a bunch of
    ; files from a glob(3) pattern. This directive can be used everywhere in the
    ; file.
    ; Relative path can also be used. They will be prefixed by:
    ; - the global prefix if it's been set (-p arguement)
    ; - /usr otherwise
    ;include=/etc/php/fpm.d/*.conf
    ; Global Options ;
    [global]
    ; Pid file
    ; Note: the default prefix is /var
    ; Default Value: none
    pid = /run/php-fpm/php-fpm.pid
    ; Error log file
    ; If it's set to "syslog", log is sent to syslogd instead of being written
    ; in a local file.
    ; Note: the default prefix is /var
    ; Default Value: log/php-fpm.log
    ;error_log = log/php-fpm.log
    ; syslog_facility is used to specify what type of program is logging the
    ; message. This lets syslogd specify that messages from different facilities
    ; will be handled differently.
    ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
    ; Default Value: daemon
    ;syslog.facility = daemon
    ; syslog_ident is prepended to every message. If you have multiple FPM
    ; instances running on the same server, you can change the default value
    ; which must suit common needs.
    ; Default Value: php-fpm
    ;syslog.ident = php-fpm
    ; Log level
    ; Possible Values: alert, error, warning, notice, debug
    ; Default Value: notice
    ;log_level = notice
    ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
    ; interval set by emergency_restart_interval then FPM will restart. A value
    ; of '0' means 'Off'.
    ; Default Value: 0
    ;emergency_restart_threshold = 0
    ; Interval of time used by emergency_restart_interval to determine when
    ; a graceful restart will be initiated. This can be useful to work around
    ; accidental corruptions in an accelerator's shared memory.
    ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;emergency_restart_interval = 0
    ; Time limit for child processes to wait for a reaction on signals from master.
    ; Available units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;process_control_timeout = 0
    ; The maximum number of processes FPM will fork. This has been design to control
    ; the global number of processes when using dynamic PM within a lot of pools.
    ; Use it with caution.
    ; Note: A value of 0 indicates no limit
    ; Default Value: 0
    ; process.max = 128
    ; Specify the nice(2) priority to apply to the master process (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool process will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; process.priority = -19
    ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
    ; Default Value: yes
    ;daemonize = yes
    ; Set open file descriptor rlimit for the master process.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit for the master process.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Specify the event mechanism FPM will use. The following is available:
    ; - select (any POSIX os)
    ; - poll (any POSIX os)
    ; - epoll (linux >= 2.5.44)
    ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
    ; - /dev/poll (Solaris >= 7)
    ; - port (Solaris >= 10)
    ; Default Value: not set (auto detection)
    ; events.mechanism = epoll
    ; Pool Definitions ;
    ; Multiple pools of child processes may be started with different listening
    ; ports and different management options. The name of the pool will be
    ; used in logs and stats. There is no limitation on the number of pools which
    ; FPM can handle. Your system will tell you anyway :)
    ; Start a new pool named 'www'.
    ; the variable $pool can we used in any directive and will be replaced by the
    ; pool name ('www' here)
    [www]
    ; Per pool prefix
    ; It only applies on the following directives:
    ; - 'slowlog'
    ; - 'listen' (unixsocket)
    ; - 'chroot'
    ; - 'chdir'
    ; - 'php_values'
    ; - 'php_admin_values'
    ; When not set, the global prefix (or /usr) applies instead.
    ; Note: This directive can also be relative to the global prefix.
    ; Default Value: none
    ;prefix = /path/to/pools/$pool
    ; Unix user/group of processes
    ; Note: The user is mandatory. If the group is not set, the default user's group
    ; will be used.
    user = http
    group = http
    ; The address on which to accept FastCGI requests.
    ; Valid syntaxes are:
    ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
    ; a specific port;
    ; 'port' - to listen on a TCP socket to all addresses on a
    ; specific port;
    ; '/path/to/unix/socket' - to listen on a unix socket.
    ; Note: This value is mandatory.
    ;listen = 127.0.0.1:9000
    listen = /run/php-fpm/php-fpm.sock
    ; Set listen(2) backlog.
    ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
    ;listen.backlog = 128
    ; Set permissions for unix socket, if one is used. In Linux, read/write
    ; permissions must be set in order to allow connections from a web server. Many
    ; BSD-derived systems allow connections regardless of permissions.
    ; Default Values: user and group are set as the running user
    ; mode is set to 0666
    listen.owner = http
    listen.group = http
    listen.mode = 0666
    ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
    ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
    ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
    ; must be separated by a comma. If this value is left blank, connections will be
    ; accepted from any ip address.
    ; Default Value: any
    ;listen.allowed_clients = 127.0.0.1
    ; Specify the nice(2) priority to apply to the pool processes (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool processes will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; priority = -19
    ; Choose how the process manager will control the number of child processes.
    ; Possible Values:
    ; static - a fixed number (pm.max_children) of child processes;
    ; dynamic - the number of child processes are set dynamically based on the
    ; following directives. With this process management, there will be
    ; always at least 1 children.
    ; pm.max_children - the maximum number of children that can
    ; be alive at the same time.
    ; pm.start_servers - the number of children created on startup.
    ; pm.min_spare_servers - the minimum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is less than this
    ; number then some children will be created.
    ; pm.max_spare_servers - the maximum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is greater than this
    ; number then some children will be killed.
    ; ondemand - no children are created at startup. Children will be forked when
    ; new requests will connect. The following parameter are used:
    ; pm.max_children - the maximum number of children that
    ; can be alive at the same time.
    ; pm.process_idle_timeout - The number of seconds after which
    ; an idle process will be killed.
    ; Note: This value is mandatory.
    pm = dynamic
    ; The number of child processes to be created when pm is set to 'static' and the
    ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
    ; This value sets the limit on the number of simultaneous requests that will be
    ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
    ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
    ; CGI. The below defaults are based on a server without much resources. Don't
    ; forget to tweak pm.* to fit your needs.
    ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
    ; Note: This value is mandatory.
    pm.max_children = 5
    ; The number of child processes created on startup.
    ; Note: Used only when pm is set to 'dynamic'
    ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
    pm.start_servers = 2
    ; The desired minimum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.min_spare_servers = 1
    ; The desired maximum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.max_spare_servers = 3
    ; The number of seconds after which an idle process will be killed.
    ; Note: Used only when pm is set to 'ondemand'
    ; Default Value: 10s
    ;pm.process_idle_timeout = 10s;
    ; The number of requests each child process should execute before respawning.
    ; This can be useful to work around memory leaks in 3rd party libraries. For
    ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
    ; Default Value: 0
    ;pm.max_requests = 500
    ; The URI to view the FPM status page. If this value is not set, no URI will be
    ; recognized as a status page. It shows the following informations:
    ; pool - the name of the pool;
    ; process manager - static, dynamic or ondemand;
    ; start time - the date and time FPM has started;
    ; start since - number of seconds since FPM has started;
    ; accepted conn - the number of request accepted by the pool;
    ; listen queue - the number of request in the queue of pending
    ; connections (see backlog in listen(2));
    ; max listen queue - the maximum number of requests in the queue
    ; of pending connections since FPM has started;
    ; listen queue len - the size of the socket queue of pending connections;
    ; idle processes - the number of idle processes;
    ; active processes - the number of active processes;
    ; total processes - the number of idle + active processes;
    ; max active processes - the maximum number of active processes since FPM
    ; has started;
    ; max children reached - number of times, the process limit has been reached,
    ; when pm tries to start more children (works only for
    ; pm 'dynamic' and 'ondemand');
    ; Value are updated in real time.
    ; Example output:
    ; pool: www
    ; process manager: static
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 62636
    ; accepted conn: 190460
    ; listen queue: 0
    ; max listen queue: 1
    ; listen queue len: 42
    ; idle processes: 4
    ; active processes: 11
    ; total processes: 15
    ; max active processes: 12
    ; max children reached: 0
    ; By default the status page output is formatted as text/plain. Passing either
    ; 'html', 'xml' or 'json' in the query string will return the corresponding
    ; output syntax. Example:
    ; http://www.foo.bar/status
    ; http://www.foo.bar/status?json
    ; http://www.foo.bar/status?html
    ; http://www.foo.bar/status?xml
    ; By default the status page only outputs short status. Passing 'full' in the
    ; query string will also return status for each pool process.
    ; Example:
    ; http://www.foo.bar/status?full
    ; http://www.foo.bar/status?json&full
    ; http://www.foo.bar/status?html&full
    ; http://www.foo.bar/status?xml&full
    ; The Full status returns for each process:
    ; pid - the PID of the process;
    ; state - the state of the process (Idle, Running, ...);
    ; start time - the date and time the process has started;
    ; start since - the number of seconds since the process has started;
    ; requests - the number of requests the process has served;
    ; request duration - the duration in µs of the requests;
    ; request method - the request method (GET, POST, ...);
    ; request URI - the request URI with the query string;
    ; content length - the content length of the request (only with POST);
    ; user - the user (PHP_AUTH_USER) (or '-' if not set);
    ; script - the main script called (or '-' if not set);
    ; last request cpu - the %cpu the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because CPU calculation is done when the request
    ; processing has terminated;
    ; last request memory - the max amount of memory the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because memory calculation is done when the request
    ; processing has terminated;
    ; If the process is in Idle state, then informations are related to the
    ; last request the process has served. Otherwise informations are related to
    ; the current request being served.
    ; Example output:
    ; pid: 31330
    ; state: Running
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 63087
    ; requests: 12808
    ; request duration: 1250261
    ; request method: GET
    ; request URI: /test_mem.php?N=10000
    ; content length: 0
    ; user: -
    ; script: /home/fat/web/docs/php/test_mem.php
    ; last request cpu: 0.00
    ; last request memory: 0
    ; Note: There is a real-time FPM status monitoring sample web page available
    ; It's available in: ${prefix}/share/fpm/status.html
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;pm.status_path = /status
    ; The ping URI to call the monitoring page of FPM. If this value is not set, no
    ; URI will be recognized as a ping page. This could be used to test from outside
    ; that FPM is alive and responding, or to
    ; - create a graph of FPM availability (rrd or such);
    ; - remove a server from a group if it is not responding (load balancing);
    ; - trigger alerts for the operating team (24/7).
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;ping.path = /ping
    ; This directive may be used to customize the response of a ping request. The
    ; response is formatted as text/plain with a 200 response code.
    ; Default Value: pong
    ;ping.response = pong
    ; The access log file
    ; Default: not set
    ;access.log = log/$pool.access.log
    ; The access log format.
    ; The following syntax is allowed
    ; %%: the '%' character
    ; %C: %CPU used by the request
    ; it can accept the following format:
    ; - %{user}C for user CPU only
    ; - %{system}C for system CPU only
    ; - %{total}C for user + system CPU (default)
    ; %d: time taken to serve the request
    ; it can accept the following format:
    ; - %{seconds}d (default)
    ; - %{miliseconds}d
    ; - %{mili}d
    ; - %{microseconds}d
    ; - %{micro}d
    ; %e: an environment variable (same as $_ENV or $_SERVER)
    ; it must be associated with embraces to specify the name of the env
    ; variable. Some exemples:
    ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
    ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
    ; %f: script filename
    ; %l: content-length of the request (for POST request only)
    ; %m: request method
    ; %M: peak of memory allocated by PHP
    ; it can accept the following format:
    ; - %{bytes}M (default)
    ; - %{kilobytes}M
    ; - %{kilo}M
    ; - %{megabytes}M
    ; - %{mega}M
    ; %n: pool name
    ; %o: ouput header
    ; it must be associated with embraces to specify the name of the header:
    ; - %{Content-Type}o
    ; - %{X-Powered-By}o
    ; - %{Transfert-Encoding}o
    ; %p: PID of the child that serviced the request
    ; %P: PID of the parent of the child that serviced the request
    ; %q: the query string
    ; %Q: the '?' character if query string exists
    ; %r: the request URI (without the query string, see %q and %Q)
    ; %R: remote IP address
    ; %s: status (response code)
    ; %t: server time the request was received
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %T: time the log has been written (the request has finished)
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %u: remote user
    ; Default: "%R - %u %t \"%m %r\" %s"
    ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
    ; The log file for slow requests
    ; Default Value: not set
    ; Note: slowlog is mandatory if request_slowlog_timeout is set
    ;slowlog = log/$pool.log.slow
    ; The timeout for serving a single request after which a PHP backtrace will be
    ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_slowlog_timeout = 0
    ; The timeout for serving a single request after which the worker process will
    ; be killed. This option should be used when the 'max_execution_time' ini option
    ; does not stop script execution for some reason. A value of '0' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_terminate_timeout = 0
    ; Set open file descriptor rlimit.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Chroot to this directory at the start. This value must be defined as an
    ; absolute path. When this value is not set, chroot is not used.
    ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
    ; of its subdirectories. If the pool prefix is not set, the global prefix
    ; will be used instead.
    ; Note: chrooting is a great security feature and should be used whenever
    ; possible. However, all PHP paths will be relative to the chroot
    ; (error_log, sessions.save_path, ...).
    ; Default Value: not set
    ;chroot =
    ; Chdir to this directory at the start.
    ; Note: relative path can be used.
    ; Default Value: current directory or / when chroot
    ;chdir = /srv/http
    ; Redirect worker stdout and stderr into main error log. If not set, stdout and
    ; stderr will be redirected to /dev/null according to FastCGI specs.
    ; Note: on highloaded environement, this can cause some delay in the page
    ; process time (several ms).
    ; Default Value: no
    ;catch_workers_output = yes
    ; Limits the extensions of the main script FPM will allow to parse. This can
    ; prevent configuration mistakes on the web server side. You should only limit
    ; FPM to .php extensions to prevent malicious users to use other extensions to
    ; exectute php code.
    ; Note: set an empty value to allow all extensions.
    ; Default Value: .php
    ;security.limit_extensions = .php .php3 .php4 .php5
    security.limit_extensions = .php .html
    ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
    ; the current environment.
    ; Default Value: clean env
    ;env[HOSTNAME] = $HOSTNAME
    ;env[PATH] = /usr/local/bin:/usr/bin:/bin
    ;env[TMP] = /tmp
    ;env[TMPDIR] = /tmp
    ;env[TEMP] = /tmp
    ; Additional php.ini defines, specific to this pool of workers. These settings
    ; overwrite the values previously defined in the php.ini. The directives are the
    ; same as the PHP SAPI:
    ; php_value/php_flag - you can set classic ini defines which can
    ; be overwritten from PHP call 'ini_set'.
    ; php_admin_value/php_admin_flag - these directives won't be overwritten by
    ; PHP call 'ini_set'
    ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
    ; Defining 'extension' will load the corresponding shared extension from
    ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
    ; overwrite previously defined php.ini values, but will append the new value
    ; instead.
    ; Note: path INI options can be relative and will be expanded with the prefix
    ; (pool, global or /usr)
    ; Default Value: nothing is defined by default except the values in php.ini and
    ; specified at startup with the -d argument
    ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
    ;php_flag[display_errors] = off
    ;php_admin_value[error_log] = /var/log/fpm-php.www.log
    ;php_admin_flag[log_errors] = on
    ;php_admin_value[memory_limit] = 32M
    In php-fpm.conf I have modified the permissions to be 0666 and I am still hitting the no such file or directory. But it is created.
    ls -la /run/php-fpm/
    total 4
    drwxr-xr-x 2 root root 80 Mar 7 13:05 .
    drwxr-xr-x 17 root root 520 Mar 7 10:59 ..
    -rw-r--r-- 1 root root 4 Mar 7 13:05 php-fpm.pid
    srw-rw-rw- 1 http http 0 Mar 7 13:05 php-fpm.sock
    Not getting what I am missing here, can someone help shed some light or smack me in the correct direction. Thanks.
    edit:
    Also verified that it is for sure running in the chroot
    ps -C nginx | awk '{print $1}' | sed 1d | while read -r PID; do ls -l /proc/$PID/root; done
    lrwxrwxrwx 1 root root 0 Mar 7 14:06 /proc/313/root -> /srv/http
    lrwxrwxrwx 1 http http 0 Mar 7 14:06 /proc/314/root -> /srv/http
    edit2:
    I just rebooted the box and was going over everything again to see if I missed anything or anything was not matching the wiki and the only extra info I could dig out of my box was new error in the logs relating to the nginx.pid
    2013/03/07 18:10:41 [notice] 411#0: signal process started
    2013/03/07 18:10:41 [alert] 387#0: unlink() "/run/nginx.pid" failed (13: Permission denied)
    ls -la /srv/http/run/
    total 12
    drwxr-xr-x 2 root root 4096 Mar 7 14:02 .
    d--x--x--x 9 root root 4096 Mar 7 11:07 ..
    -rw-r--r-- 1 http http 4 Mar 7 18:12 nginx.pid
    It appears to have the proper permissions and it is not in /run/
    ls -la /run/nginx.pid
    ls: cannot access /run/nginx.pid: No such file or directory
    Going to try setting it up again on another box to see if I catch what I did wrong on this one, but will be leaving this one as is to make sure I figure out what happened. Is it that my chroot is bad? That is really the only thing I can think of that is really any different than other NGINX installs I have done, which have always been on a Debian based system.
    Last edited by vwyodajl (2013-03-07 18:24:55)

    Might sound stupid, but do you have php-fpm running?
    Means, is there a php-fpm process on your box, and does the socket exist like in:
    └» ps -ef|grep php-fpm
    root 3045 1 0 Mär04 ? 00:00:09 php-fpm: master process (/etc/php/php-fpm.conf)
    http 13534 3045 0 18:22 ? 00:00:10 php-fpm: pool www
    http 13545 3045 0 18:22 ? 00:00:08 php-fpm: pool www
    http 22807 3045 0 19:46 ? 00:00:01 php-fpm: pool www
    tom 27863 28055 0 20:16 pts/1 00:00:00 grep --colour=auto php-fpm
    └» ls -l /run/php-fpm/php-fpm.sock
    srw-rw---- 1 http http 0 4. Mär 22:24 /run/php-fpm/php-fpm.sock
    EDIT: somehow missed your output regarding the php-fpm socket. Ignore above then, I have no idea about chroot, I use LXC.
    Last edited by teekay (2013-03-07 19:24:04)

  • [Solved]Lighttpd and php/fcgi

    I installed and configured lighttpd and php/fcgi exactly as found http://wiki.archlinux.org/index.php/Lig … nd_Non-SSL except for: ssl and eaccelerator. I am also running php with the lighttpd user instead of phpuser.
    I have done chmod 775 for /var/run/ligghtpd and chown lighttpd -R /var/run/lighttpd and still get these errors.
    2008-05-02 10:14:28: (log.c.75) server started
    2008-05-02 10:14:28: (mod_fastcgi.c.904) bind failed for: unix:/var/run/lighttpd/php-fastcgi.socket-0 Permission denied
    2008-05-02 10:14:28: (mod_fastcgi.c.1340) [ERROR]: spawning fcgi failed.
    2008-05-02 10:14:28: (server.c.908) Configuration of plugins failed. Going down.
    But if I stop /etc/rc.d/spawn-php, and restart my server, everything works perfectly, the phpinfo page, and a basic php include.
    my /etc/php/php.ini
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; function addslashes() on each input element you wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = On
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    open_basedir = /home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 32M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = Off
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/20060613/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 2M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = Off
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    ;sqlite.assoc_case = 0
    [xmlrpc]
    ;xmlrpc_error_number = 0
    ;xmlrpc_errors = 0
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/tmp"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mime_magic.so
    ;extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    my /etc/lighttpd/lighttpd.conf
    # lighttpd configuration file
    # use it as a base for lighttpd 1.0.0 and above
    # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
    ############ Options you really have to take care of ####################
    ## modules to load
    # at least mod_access and mod_accesslog should be loaded
    # all other module should only be loaded if really neccesary
    # - saves some time
    # - saves memory
    server.modules = (
    # "mod_rewrite",
    # "mod_redirect",
    # "mod_alias",
    "mod_access",
    # "mod_cml",
    # "mod_trigger_b4_dl",
    # "mod_auth",
    # "mod_status",
    # "mod_setenv",
    "mod_fastcgi",
    # "mod_proxy",
    # "mod_simple_vhost",
    # "mod_evhost",
    # "mod_userdir",
    # "mod_cgi",
    "mod_compress",
    # "mod_ssi",
    # "mod_usertrack",
    # "mod_expire",
    # "mod_secdownload",
    # "mod_rrdtool",
    "mod_accesslog" )
    ## a static document-root, for virtual-hosting take look at the
    ## server.virtual-* options
    server.document-root = "/home/lighttpd/html/"
    ## where to send error-messages to
    server.errorlog = "/var/log/lighttpd/error.log"
    # files to check for if .../ is requested
    index-file.names = ( "index.php", "index.html",
    "index.htm", "default.htm" )
    ## set the event-handler (read the performance section in the manual)
    # server.event-handler = "freebsd-kqueue" # needed on OS X
    # mimetype mapping
    mimetype.assign = (
    ".pdf" => "application/pdf",
    ".sig" => "application/pgp-signature",
    ".spl" => "application/futuresplash",
    ".class" => "application/octet-stream",
    ".ps" => "application/postscript",
    ".torrent" => "application/x-bittorrent",
    ".dvi" => "application/x-dvi",
    ".gz" => "application/x-gzip",
    ".pac" => "application/x-ns-proxy-autoconfig",
    ".swf" => "application/x-shockwave-flash",
    ".tar.gz" => "application/x-tgz",
    ".tgz" => "application/x-tgz",
    ".tar" => "application/x-tar",
    ".zip" => "application/zip",
    ".mp3" => "audio/mpeg",
    ".m3u" => "audio/x-mpegurl",
    ".wma" => "audio/x-ms-wma",
    ".wax" => "audio/x-ms-wax",
    ".ogg" => "application/ogg",
    ".wav" => "audio/x-wav",
    ".gif" => "image/gif",
    ".jar" => "application/x-java-archive",
    ".jpg" => "image/jpeg",
    ".jpeg" => "image/jpeg",
    ".png" => "image/png",
    ".xbm" => "image/x-xbitmap",
    ".xpm" => "image/x-xpixmap",
    ".xwd" => "image/x-xwindowdump",
    ".css" => "text/css",
    ".html" => "text/html",
    ".htm" => "text/html",
    ".js" => "text/javascript",
    ".asc" => "text/plain",
    ".c" => "text/plain",
    ".cpp" => "text/plain",
    ".log" => "text/plain",
    ".conf" => "text/plain",
    ".text" => "text/plain",
    ".txt" => "text/plain",
    ".dtd" => "text/xml",
    ".xml" => "text/xml",
    ".mpeg" => "video/mpeg",
    ".mpg" => "video/mpeg",
    ".mov" => "video/quicktime",
    ".qt" => "video/quicktime",
    ".avi" => "video/x-msvideo",
    ".asf" => "video/x-ms-asf",
    ".asx" => "video/x-ms-asf",
    ".wmv" => "video/x-ms-wmv",
    ".bz2" => "application/x-bzip",
    ".tbz" => "application/x-bzip-compressed-tar",
    ".tar.bz2" => "application/x-bzip-compressed-tar",
    # default mime type
    "" => "application/octet-stream",
    # Use the "Content-Type" extended attribute to obtain mime type if possible
    #mimetype.use-xattr = "enable"
    ## send a different Server: header
    ## be nice and keep it at lighttpd
    # server.tag = "lighttpd"
    #### accesslog module
    accesslog.filename = "/var/log/lighttpd/access.log"
    ## deny access the file-extensions
    # ~ is for backupfiles from vi, emacs, joe, ...
    # .inc is often used for code includes which should in general not be part
    # of the document-root
    url.access-deny = ( "~", ".inc" )
    $HTTP["url"] =~ "\.pdf$" {
    server.range-requests = "disable"
    # which extensions should not be handle via static-file transfer
    # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
    static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
    ######### Options that are good to be but not neccesary to be changed #######
    ## bind to port (default: 80)
    #server.port = 81
    ## bind to localhost (default: all interfaces)
    #server.bind = "127.0.0.1"
    ## error-handler for status 404
    #server.error-handler-404 = "/error-handler.html"
    #server.error-handler-404 = "/error-handler.php"
    ## to help the rc.scripts
    server.pid-file = "/var/run/lighttpd.pid"
    ###### virtual hosts
    ## If you want name-based virtual hosting add the next three settings and load
    ## mod_simple_vhost
    ## document-root =
    ## virtual-server-root + virtual-server-default-host + virtual-server-docroot
    ## or
    ## virtual-server-root + http-host + virtual-server-docroot
    #simple-vhost.server-root = "/home/lighttpd/vhosts/"
    #simple-vhost.default-host = "www.example.org"
    #simple-vhost.document-root = "/htdocs/"
    ## Format: <errorfile-prefix><status-code>.html
    ## -> ..../status-404.html for 'File not found'
    #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-"
    #server.errorfile-prefix = "/srv/www/errors/status-"
    ## virtual directory listings
    #dir-listing.activate = "enable"
    ## enable debugging
    #debug.log-request-header = "enable"
    #debug.log-response-header = "enable"
    #debug.log-request-handling = "enable"
    #debug.log-file-not-found = "enable"
    ### only root can use these options
    # chroot() to directory (default: no chroot() )
    #server.chroot = "/"
    ## change uid to <uid> (default: don't care)
    ## !!!! IF YOU CHANGE THE UID OR GROUPID apply the changes to /etc/logrotate.conf as well !!!
    server.username = "lighttpd"
    ## change uid to <uid> (default: don't care)
    server.groupname = "lighttpd"
    #### compress module
    compress.cache-dir = "/home/lighttpd/cache/"
    compress.filetype = ("text/plain", "text/html")
    #### proxy module
    ## read proxy.txt for more info
    #proxy.server = ( ".php" =>
    # ( "localhost" =>
    # "host" => "192.168.0.101",
    # "port" => 80
    #### fastcgi module
    ## read fastcgi.txt for more info
    ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
    fastcgi.server = ( ".php" =>
    ( "localhost" =>
    "socket" => "/var/run/lighttpd/php-fastcgi.socket",
    "bin-path" => "/usr/bin/php-cgi"
    #### CGI module
    #cgi.assign = ( ".pl" => "/usr/bin/perl",
    # ".cgi" => "/usr/bin/perl" )
    #### SSL engine
    #$SERVER["socket"] == "0.0.0.0:443" {
    # ssl.engine = "enable"
    # ssl.pemfile = "/home/lighttpd/ssl/server.pem"
    # server.errorlog = "/var/log/lighttpd/error-ssl.log"
    # accesslog.filename = "/var/log/lighttpd/access-ssl.log"
    # server.document-root = "/home/lighttpd/html-ssl"
    #### status module
    #status.status-url = "/server-status"
    #status.config-url = "/server-config"
    #### auth module
    ## read authentication.txt for more info
    #auth.backend = "plain"
    #auth.backend.plain.userfile = "lighttpd.user"
    #auth.backend.plain.groupfile = "lighttpd.group"
    #auth.backend.ldap.hostname = "localhost"
    #auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
    #auth.backend.ldap.filter = "(uid=$)"
    #auth.require = ( "/server-status" =>
    # "method" => "digest",
    # "realm" => "download archiv",
    # "require" => "user=jan"
    # "/server-config" =>
    # "method" => "digest",
    # "realm" => "download archiv",
    # "require" => "valid-user"
    #### url handling modules (rewrite, redirect, access)
    #url.rewrite = ( "^/$" => "/server-status" )
    #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
    #### both rewrite/redirect support back reference to regex conditional using %n
    #$HTTP["host"] =~ "^www\.(.*)" {
    # url.redirect = ( "^/(.*)" => "http://%1/$1" )
    # define a pattern for the host url finding
    # %% => % sign
    # %0 => domain name + tld
    # %1 => tld
    # %2 => domain name without tld
    # %3 => subdomain 1 name
    # %4 => subdomain 2 name
    #evhost.path-pattern = "/home/lighttpd/vhosts/%3/htdocs/"
    #### expire module
    #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")
    #### ssi
    #ssi.extension = ( ".shtml" )
    #### rrdtool
    #rrdtool.binary = "/usr/bin/rrdtool"
    #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd"
    #### setenv
    #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" )
    #setenv.add-response-header = ( "X-Secret-Message" => "42" )
    ## for mod_trigger_b4_dl
    # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db"
    # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
    # trigger-before-download.trigger-url = "^/trigger/"
    # trigger-before-download.download-url = "^/download/"
    # trigger-before-download.deny-url = "http://127.0.0.1/index.html"
    # trigger-before-download.trigger-timeout = 10
    ## for mod_cml
    ## don't forget to add index.cml to server.indexfiles
    # cml.extension = ".cml"
    # cml.memcache-hosts = ( "127.0.0.1:11211" )
    #### variable usage:
    ## variable name without "." is auto prefixed by "var." and becomes "var.bar"
    #bar = 1
    #var.mystring = "foo"
    ## integer add
    #bar += 1
    ## string concat, with integer cast as string, result: "www.foo1.com"
    #server.name = "www." + mystring + var.bar + ".com"
    ## array merge
    #index-file.names = (foo + ".php") + index-file.names
    #index-file.names += (foo + ".php")
    #### include
    #include /etc/lighttpd/lighttpd-inc.conf
    ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
    #include "lighttpd-inc.conf"
    #### include_shell
    #include_shell "echo var.a=1"
    ## the above is same as:
    #var.a=1
    DAEMONS=(syslog-ng iptables network netfs crond sshd lighttpd)
    Did I do anything wrong, is this how it's supposed to work? I googled the error from lighttpd error.log and the only useful information I could find was in polish i think, and unfortunately, i don't speak polish.
    -Zack
    Last edited by Sjoden (2008-05-28 22:00:37)

    ls -l /var/run/lighttpd/
    And how are you spawning the php instances? I don't see that in the daemons array anywhere.
    EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
    You will note that with pre-spawned information, the config looks different[1].
    You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
    [1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

  • [Solver]Nginx and fcgiwrap

    I have been trying to get a single user server side cookie setup running on arch with nginx and fcgiwrap. But cant seem to sort out the following my stripped down nginx.conf is as follows…
    server {
    listen 127.0.0.1:8080;
    server_name login;
    location / {
    root /home/nginx/login/;
    index index.html;
    location ~ \.cgi$ {
    #root if ommited throws 403 error
    #root /home/nginx/login #allows .cgi execution
    #root /home/nginx/login/cgi-bin/; #throws 403 error
    fastcgi_pass unix:/home/nginx/fcgiwrap.sock;
    include fastcgi.conf;
    current file setup is…
    nginx:nginx rwxr-x--- /home/nginx/login - web server root
    fcgi:fcgi rwxr-x--- /home/nginx/login/cgi-bin - restrict executables to this folder
    With nginx being in the fcgi group and fcgi being in the nginx group...
    I was hoping I could restrict what nginx would pass to fcgiwrap to a none nginx owned sub directory. Or at worst figure out whats actually going on here and the only thing i’ve found through searching is old posts about a fcgiwrap bug that was apparently fixed on debian years ago.
    So far the only sort of error log or anything to help with debugging has been
    Cannot get script name, are DOCUMENT_ROOT and SCRIPT_NAME (or SCRIPT_FILENAME) set and is the script executable?
    Output from journalctl -u fcgiwrap.service -f…
    Guessing I could just be going about this the wrong way but I’m stumped and could use any help trying to figure this out.
    Last edited by spareproject (2014-07-29 14:31:01)

    solved thanks to kolbyjack on freenode #nginx...
    Stops cgi from being executed in anything bar the cgi-bin folder in the web root
    and throws 404 errors for anything that isnt a .cgi in the cgi-bin
    http {
    upstream_fcgiwrap { server unix:/home/nginx/fcgiwrap.sock }
    server {
    listen 127.0.0.1:8080;
    server_name login;
    root /home/nginx/login/;
    index index.html;
    location /cgi-bin/ {
    return 404;
    location ~ \.cgi$ {
    fastcgi_pass _fcgiwrap;
    include fastcgi.conf;

  • [Solved] gcc 4.7 breaks passenger-install-nginx-module

    I needed to recompile nginx with some different options, but since upgrading to gcc 4.7 running passenger-install-nginx-module always gives the following compilation error:
    g++ -Iext  -D_REENTRANT -I/usr/local/include -DHASH_NAMESPACE="__gnu_cxx" -DHASH_NAMESPACE="__gnu_cxx" -DHASH_FUN_H="<hash_fun.h>" -DHAS_ALLOCA_H -DHAS_SFENCE -DHAS_LFENCE -Wextra -Wno-unused-parameter -Wno-parentheses -Wpointer-arith -Wwrite-strings -Wno-long-long -Wno-missing-field-initializers -g -DPASSENGER_DEBUG -DBOOST_DISABLE_ASSERTS -o ext/common/libboost_oxt/aggregate.o -c ext/common/libboost_oxt/aggregate.cpp
    In file included from ext/boost/thread/detail/platform.hpp:17:0,
                     from ext/boost/thread/once.hpp:12,
                     from ext/boost/src/pthread/once.cpp:7,
                     from ext/common/libboost_oxt/aggregate.cpp:5:
    ext/boost/config/requires_threads.hpp:29:4: error: #error "Threading support unavaliable: it has been explicitly disabled with BOOST_DISABLE_THREADS"
    Upgrading to latest gems made no difference.
    This took me ages to find a workaround so for anyone who has this problem here is a description of the problem and how to resolve the issue (you will need to edit the file /usr/lib/ruby/gems/1.9.1/gems/passenger-3.0.11/ext/boost/config/stdlib/libstdcpp3.hpp):
    https://svn.boost.org/trac/boost/ticket/6165

    Good to know
    If you get a  "TIME_UTC" compatability issue
    Passenger's boost version fails to compile,
    read more: Unable to compile applications using boost_thread since updating boost

  • I get "Welcome to NGINX" instead of my home page

    I installed Firefox 5 and at first it was fine, then I got "Welcome to NGINX!" instead of my homepage. The address bar says I'm on my homepage, though. I uninstalled, ran antivirus, reinstalled and it's still there. I have used Firefox for years, but I went back to IE9.
    ''name correction made''

    Check for malware
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Configuring Reverse Proxy Nginx for Messenger

    We have updated to Messenger 3.0 and are looking to use the Mobile apps. We have a reserve proxy Nginx which we use for WebAccess and have tried to configure this for Messenger.
    When I try to connect using a Mobile app (from the Internet) I can see a connection been made in the Messenger Agent logs and then get a failed to connect error:
    10:36:12 B70 SPL Login failed [0xD130]: ::xxx.xxx.xxx.xxx - An invalid tag was discovered
    My question is
    Has anyone used nginx to reverse proxy Messenger successfully and if so how?
    And if not, what configuration have they used?
    Thanks in advance

    johngallagher,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • HT5312 I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? th

    I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
    He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
    But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set  up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car  pato caa パトカア　they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
    I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.

    You have to enter the Apple ID and password. You are running into the Activation Lock
    iCloud: Find My iPhone Activation Lock in iOS 7
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

  • Is There any API in receivables payment will made against closed invoices ?

    Hi ALL,
    i have requirement as below.
    i am doing AR Invoice Data Migration for Instance 11.5.5 (as a Source Instance) to the new instance R12 (as a target instance).
    Both open and closed invoices will have to be migrated from 11.5.5 to R12 to provide the drill down facility for audit purpose.
    To meet the above requirement all the open and closed invoice will be picked up from 11.5.5 ; and imported into R12..
    Subsequently, full payment will be made in R12 against all closed invoices in 11.5.5 to close those invoices by using any APIs?
    can some one explain is there any API in receivables payment will made against closed invoices.
    Thanks,
    VSR.

    Hi,
    Can you be clear on your question: You want any API to make payment against closed invoices?
    To me, You are making things complex. We can achieve the Migration of Closed invoices using following two procedures:
    Procedure: 1
    Ask Functional Guy to create a Transaction Type 'Closed Invoices' with Open to Receivables Flag not checked. +(You can uncheck Post to GL flag also, if required depending on your migration strategy)+. Status at Transaction Type if taken as 'Closed' it will be appropriate.
    Invoices migrated using this Transaction Type shall not be shown as Outstanding but will be useful for Audit.
    Procedure: 2
    Consider the amount due Original of Closed Invoices and migrate them with the amount as Amount due remaining.
    While migrating populate Receipt Method,Payment Method and Instruments useful for Automatic Receipts.
    Once Create Automatic Receipts Program is run, it will close all these invoices. Note: We require dummy bank here which points to a Clearing account.
    Automatic Receipts program is also an API.
    In the above 2 ways, we are acheiving the Goal by using Functional knowledge rather than Technical. And I think following Functional way is better and less time consuming.
    Please discuss with your Functional consultant if required. You can succeed.
    Regards,
    Sridhar

  • How can i get Background Jobs list which is made me?

    I created background job using JOB_OPEN and SUBMIT and JOB_CLOSE.
    I need to Background Job list which is made me..
    Do u know any function or logic?
    plz~

    [BP_JOBVARIANT_OVERVIEW|http://help.sap.com/saphelp_45b/helpdata/en/fa/096ccb543b11d1898e0000e8322d00/frameset.htm]
    BP_JOBLOG_READ

  • My wife and I have made many purchases over several years on seperate accounts, how could we join them into one account, without losing everything?

    My wife and I have made many purchases over several years on seperate accounts, how could we join them into one account, without losing everything? We both use Iphone 5's and share an Imac at home.

    Purchases using one Apple ID cannot be merged or transferred to another Apple ID. Purchases are forever tied to that Apple ID used. You have to decide which Apple you want to use for purchases and stick to that Apple ID so that you can share: Settings > iTunes & App Stores > Apple ID : > use the same Apple ID here to share purchases.

  • Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

    Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

    Why have 5 accounts if you need to access all of them.. just have one account?
    Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

  • My iTunes downloads were made using my old gmail address.  I had to quit using this email address as it got hacked.  I created a new gmail account.  How can I get my iTunes downloads into the new gmail account?

    My iTunes downloads were made using my old gmail address.  I had to quit using this address  as it got hacked.  How do I get my iTunes downloads into my new iTunes account that was created with a new gmail address?  In my old iTunes account (with the old gmail address,  I can't 'update' my email address or even 'add an alternate address' as I had already created this gmail account and inputting the new address into iTunes gives me the 'pop-up' that 'this account is already in use.'   Advice please!

    Good luck. It took me weeks to fix this when I had to do it. Your old ID branches out in lots of places. You may have to delete app and get them again, at least that is what Apple told me. Plus, all of your settings on your iPad that required any ID, will have to be changed. My old ID kept showing up in different places for weeks. Changing it on Apple.com is just the beginning.

  • I made my own apple id because my family was getting my texts from other people. I want to add my device to my dads find my iphone app on his icloud but can't figure out how, without having to log in to his apple id on my phone. how do i add my device?

    I made my own Apple ID because when I was logged into my dad's my family was receiving my texts from other people. I want to add my device to my dad's "find my iphone" app but without signing into his Apple ID on my phone because that was causing them to get my texts. I was told by Apple I could add my device to his by signing into icloud.com but there is no option that I can find to add my device. And I don't want to log back in to his.. Any ideas???

    Also when I apply the safety copy it only imports the app the phones have had in common, so none of the apps that only the iPhone 4 had doesn't come in, only the ones I and the iPhone 4 has had in common. So you say the only way I can use the Apple ID to download on the old iPhone 4 is if I delete the apps that are in the phone and then download them again? How will that change the ID to download/update from. Won't it still have mine to update/download from?

Maybe you are looking for

  • Pivot_table's percent_of_column not displayed correctly in graph

    I have a pivot table with one field of value X. I duplicated that column and set 'show data as' value as percent_of_column. It works great on the table, where I see percentages figures, but the y_axis of the related chart still show the origin values

  • Join issue OBIEE (BMM Layer)

    Hi All - 1. I have following tables: D1 - Dimension Table D2 - Dimension Table D3 - Dimension Table F1 - Fact Table We have join between - D1 - F1, D2, F1 & D3 - F1 2. We have some more tables : D4 - dimension Table F2 - Fact Table We have join betwe

  • Photoshop CS3 Tablet problems

    Hi. I have a Laptop (HP PAVILION DV6000, Dual-core at 2 ghz with 2 ghz of ram) and Windows Vista Home Premium Pre-Installed. The thing is...i get myself a digital tablet NGS CADBOY ULTRA, it has 1024 pressing levels. Windows Vista has its own drivers

  • Flash Errors in HTML

    Until recently I was able to receive Flash compile errors in Internet Explorer. The would pop up in a window much like a javascript alert. These were very helpful and I would like to continue receiving them. However recently they stopped, without pro

  • Backup Without giving username and password

    Dear Friends, I am using Oracle 10g. I created a batch file to make export backup. In the batch file i have to mention username and password. Whereas i don't want to mention username and password so that nobody can see that. Is there any option to do