NI-FBUS Communications Manager won't start when PCMCIA card is configured as Basic Device and Visitor address

I can't get the NI-FBUS Communications Manager to start up unless the PCMCIA Series 2 Card is configures as Link Master. I want to Connect to a FFB Segement which already has a LAS

Hello,
The same case.
It means that fisically I have to connect the the PCMCIA to the actual segment (with its LAS) and then start up the NI-FBUS Comm. Manager?
Like a Basic Device and Visitor Address will let me change parameters at the devices?
Thanks in advance,
Braulio

Similar Messages

Password Manager won't start

Password Manager won't start. If I click on the ThinkVantage icon and go to Security, Protection, and Recovery > Manage passwords, it makes the system tray icon show up but it doesn't fill in passwords. If I right click on the system tray icon and click Open Password Manager... it doesn't do anything.
Any ideas?

jpd111 wrote:
I loaded them up, rebooted and everything is fine now.
Welcome to the forum, jpd111, and congratulations on being our 20,000th new member!
And thanks to Justin for sharing his knowledge and experience with others!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Fabric Manager won't Start

I upgraded to 3.1(2a) and then I reinstalled Fabric Manger and Device Manager. Fabric Manager won't start, error is "Unable to connect to server! Admin login from 127.0.0.1 failed". Device Manager is fine.

I am running into the same situation but with FM(3.0.2a) on a Windows Server 2003. We are using Citrix for FM client login. Looking at the windows services FM server services is in running status. The second login attempt would work, not sure why?
When log in locally via windows remote desktop connection we get these error dialogs "ERROR Open Fabric - Fabric Manager 3.0(2a) Error in register for events: Connection refused to host: 10.1.x.x;nested exception is:java.net.ConnectException: Connection timed out: connect
and
NoSuchOject: no such object in table
After clear these dialogs the second attempt with work.
I can see login issues from remote client but even locally on the server? Any suggestions?
Thanks,

PowerBook G4 - Won't Start Up - 3 Strange Beeps then just LED flashes and sudden death - black screen.

PowerBook G4 - Won't Start Up - 3 Strange Beeps then just LED flashes and sudden death - black screen.
Prior that the powerbook also couldn't start but I could see the Apple logo, so via fire-wire (holding T at start up) I backed up the hard disk.
Check via DiskToolPro the structure, defragmented. Via DiskWarrior rebuild the directory
and finally not been able to access the drive I reformatted the drive via fire-wire drive.
Re-started the powerbook holding C to boot up from DVD - nothing
Re-started again and it give me one long beep and black screen. An indication that my 1gig RAM is bad or gone (?) and the DVD is stuck inside.
Bought new one 1 gig, installed it and now I'm getting only three beeps.
I tried all, changed the slots several times and nothing.
I tried more as:
                         c -- to boot from CD (again while the DVD is still inside and I cannot get it out)
                         cmd-opt-p-r -- to Zap the PRAM,
                         cmd-opt-n-v -- to clear NV RAM,
                         cmd-opt-o-f -- to boot into open firmware … and nothing. The DVD is in and I have
                                                black screen with three beeps and flashing LED.
Do I have to replace the Logic Board?   (Anyone has a spare one ?)
But it is the faulty Logic board?
Could anyone help me out? Please.
I'm retired and I cannot afford a new laptop - and this powerbook was a great, great horse for me until that horrible set of three beeps.
Thank you in advance for any advice and help.
Martin
THE SPECS OF MY POWERBOOK:
Model Family:
Powerbook G4 Aluminum
Processor:
1.67GHz G4 (PowerPC 7457B)
Manufacturer:
Motorola
# of CPUs:
1
Codename:
Apollo 7
Display:
Size:
15.2"
Finish:
Matte
Resolution:
1280x854
Backlight:
CCFL
Base Memory:
1gig PC2700 SODIMM
Brand:
Apple
Wireless:
802.11b/g
Color(s):
Aluminum
Original OS:
Mac OS X 10.6.3
Battery:
50-watt-hour removable lithium-ion battery
Graphics:
ATI Mobility Radeon 9700 (64MB)
Base Storage:
80GB 5400RPM EIDE 2.5"
Optical Drive:
8x Superdrive
Model Number:
A1106
Sales Number(s):
M9677LL/A
Machine Number(s):
PowerBook5,6
Dimensions:
13.7 in x 9.5 in x 1.1 in
Weight:
5.6 lb
Production:
Jan 31, 2005 - Oct 19, 2005
Factory:
China
Production Year:
2005
Production Week:
35 (September)
Production Number:
4240

But it is the faulty Logic board?
There was a known issue with LBs in 15-inch PowerBooks with 1.5 and 1.67Ghz processors in which one RAM slot would fail. There once was a repair extension program that fixed the problem at no cost, but it is long-expired.
The problem with seeking a used logic board for these models is that so many had their boards replaced that it increases the chances of the boards in the used/pulled markets having the same problem you have now. The replacement program also came close to exhausting the supply of new boards,
If it turns out to be a bad LB and you can't find a replacement, consider how used computer pricing works: A used computer is worth hugely more in parts than if bought as a working unit. I.E, you can probably find a working PowerBook that will cost less than the logic bard alone. It also possible to find a used MacBook Pro for less that a replacement LB.
If you tell us your approximate geographic location, we can see what's available nearby. I'm also retired, and and visiting my wife's family this week so have even more time than usual to help you search.
Regards,
Allan Jones

Won't start up, gets to the avi exporter on startup and crashes

Everything was working fine, then I went and downloaded a shareware video converter to convert mov files to
avi, now elements 8 won't start up. It goes through the startup process, and when it gets to starting loading exporter AVI.prm it crashes everytime. I've reloaded the program 2, and I've ran a windows upgrade (reload) once, and removed the converter program. Any suggestions?

The first thing that I would look into would be to create a System Restore Point for today, and then shut-down the computer. Now, boot into Safe-Mode and chose to go to a System Restore Point, from before you installed the converter, back when things ran properly and test.
Good luck,
Hunt

Ram Preview won't start when Render multiple frames simultaneously enabled

Hello everyone,
I have an issue with rendering AE CC , with my new PC computer in Windows 8.1 pro 64 bit
As the title says , my issue is Ram Preview won't start when Render multiple frames simultaneously enabled. Actually it starts after 8 -30 seconds depending of project complexity and the rendering is slower and skipping frames !
12 cores with 2 GB ram each.
When I disable the option of multiple frames simultaneously render starts ok.
but it's really very sad that I can't use this beast of CPU in full potential. its an new intel i7 5930K , 32 Ram DDR4 2.4 Ghz
Any advice and options would be much appreciated.
Thanks,
Vonzar.
Setup:
Windows 8.1 Pro 64 bit
CPU : Intel Core i7 5930K 3.5 GHz Six Core Socket 2011-3 140W Box
GPU : nVidia GeForce GTX 970 4GB DDR5 PCI-E
RAM : 32GB DDR4 Non ECC CL16 2400MHz Crucial Ballistix Sport
Mother board : Asrock x99 extreme 6

If you have any render or preview problems just turn off MP because, first, it only works with certain specific effects and codecs, and 2, it causes more problems that it solves most of the time. I only turn on MP rendering when I know for sure that it will speed up my workflow.
You should have a multiple of 4 GB assigned to AE and Other apps and an even number of cores. If you are using MP rendering make sure that the number of actual cores used makes sense and that there are an even number of cores assigned to other applications. Most important of all, don't spend hours trying to tweak MP rendering to save a few seconds in a render. Follow these general guidelines and then run a short test to see if it works. If you project involves any temporal effects at all turn it off.
Here is an example of the MP settings for a 4 year old Mac Mini that actually work for some projects, but most of the time it is turned off.
I should say that I can allocate 3 GB of ram per background CPU and still see 2 as the actual CPU's that will be used but this little Mac Mini works better with 2 selected. Setting the RAM allocation to 4 GB drops Actual CPU's to 0
BTW, I use the mac mini to record most of my tutorials because I figure that if I do a tutorial that will run OK on a Mac Mini, then anyone with an adequate system should be able to follow along without any problems.

Itunes won't start when i plug in my ipod

itunes won't start when i plug in my ipod touch

Good catch! Glad you got things working again.

Why does CS6 automatically start when i plug in my Canon Eos camera and how do I stop it

Why does CS6 automatically start when i plug in my Canon Eos camera and how do I stop it from doing so?

Autostart is controlled by your operating system. check the relevant system control panel or right-click the drive letter of your memory card to change these options in teh properties.
Mylenium

My problem started when i connected my iphone5 into mac book and i started restoring data, by that i lost my recent photo's ,i tryed a program but it was recovering the previous photo's not the recent once ... need ur help what to do plz....thank u

my problem started when i connected my iphone5 into mac book and i started restoring data, by that i lost my recent photo's ,i tryed a program but it was recovering the previous photo's not the recent once ... need ur help what to do plz....thank u

Not much you can do. You overwrote your current data with older data when you restored the phone from that backup. Your data's gone.

Sync on desktop manager won't start with new 9700

I am attaching my 9700, with a USB cable, to my laptop. The Desktop Manager software opens but it will not start the sync'ing process with my device.
- the little "check" box - "automatically synchronize device and computer when USB connected" is switched on
- I am using the latest version of Desktop Manager
- the "Synchronize" tab is in grey. It's grey'ed out. When my curser hovers over "Synchronize" it won't light up, as in, it won't let me press the Synchronize button to initiate the process.
- my 9700 is brand new. I had no synchronizing problems with my previous model, the Curve.
- my laptop is a great device, I don't currently, nor haven't had, any issues with it in the past - DELL D420 Latitude. I seem to have all the drivers I need
- I am running Windows XP
- I am not linking to a server at work. My Blackberry is set is purely a directly link from the 9700 device, to my computer, and syncs with the calendar, address book and tasks list (MS Outlook 2003 from MS Office)
- my new 9700 - I bought it 2weeks ago. It did sync in the beginning. About three times successfully. But not now obviously.
- on my Windows bar at the bottom of my computer screen it pops up "new hardware added" and the 9700 device is no longer described by its identity number (PIN ref?), it says "new hardware added, 'memory device'"
- I've searched through the Blackberry help pages and so far, all I can come up with is that my computer can't seem to recognise now, for some unknown reason, that it is connected to my 9700. Blackberry help suggested I go to the "pairing" pages of the Help guide, but I thought "pairing" was only a subject that involves Bluetooth activities. Not a USB cable connection.
Anyone got any ideas?

Hey Graeme0309,
If you disconnect the BlackBerry from your computer and open Desktop Manager, are you able to open Synchronize?
What version of BlackBerry Desktop Manager are you using?
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

HELP entreprise manager won't start in windows 7 !

SYSTEM information : windows 7 ultimate WITH Oracle DATABASE 11gR2
I'm connected with a windows user that reside in ora_dba and administrator groups
I execute all commands with "run as administrator"
+'administrator' is also in ora_dba group+
after installing oracle software I executed dbca to create a new database, but after the creation dbconsole won't run!
*>emctl start dbconsole* gives me An instance of Oracle Enterprise Manager 11g Database Control is already running
and the service 'oracleDbConsoleorcl' is not started, when I start it mannually it gives me windows could not start the service in local computer
so now I know that this errors is caused by a running process, it's the 'java.exe : 5520', I kill it and try to start dbconsole again:
*>emctl start dbconsole* it gives me
The OracleDBConsoleorcl service could not be started
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
and of course the result of *>NET HELPMSG 3547* is A service specific error occurred: *** :/
so I tried to recreate the repository but after the creation (successful) the result is the same errors when I want start dbconsole :
*>emca -config dbcontrol db -repos recreate*
You have specified the following settings
Database ORACLE_HOME ................ d:\app\oracle\database\product\11.2.0\dbhome_1
Local hostname ................ localhost
Listener ORACLE_HOME ................ d:\app\oracle\database\product\11.2.0\dbhome_1
Listener port number ................ 1521
Database SID ................ orcl
_.... no warning or errors ..._
Sep 19, 2012 10:11:13 PM oracle.sysman.emcp.EMDBPostConfig invoke
WARNING: Error starting Database Control.Please execute the following command(s)
+1) Set the environment variable ORACLE_UNQNAME to Database unique name+
+2) d:\app\oracle\database\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole+
but ORACLEUNQNAME is already set !_
C:\Windows\system32>set oracle
ORACLE_HOSTNAME=localhost
ORACLE_SID=orcl
ORACLE_UNQNAME=orcl
C:\Windows\system32>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://localhost:1158/em/console/aboutApplication
- An instance of Oracle Enterprise Manager 11g Database Control is already running. //_the same error before I recreate the repos_
C:\Windows\system32>emctl status agent
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent is Not Running
what's wrong ????

I had the same problem.
This was beacause the OS time setting that did not corresponds to the regional setting.
In my case, the daylight saving time.

Recovery manager won't start for clean reinstall of Windows 7

I have an HP Pavilion Elite HPE-110f that is 4 years old. Everything was fine until a couple of weeks ago started getting RAID messages on startup and other little qwerky things. Then last week the dreaded BSOD showed up. I shut down the computer and tried to restart, but got error messages that the computer couldn't start. I then tried everything I could think of - startup repair, tried to boot in safe mode, recovery from partitioned drive, system restore - nothing worked. I have the recovery media from HP but was saving that as my final option. I tried to do a clean reinstall today from the discs, but now the recovery manager won't even come up. Can somebody PLEASE help me get my OS back?

No, it wasn't an error message. It was just notifications about different things being accessed on port1. I just assumed it was startup items loading, but I had never gotten notifications about them before. I just tried again to reinstall from recovery discs. Pressed esc and got the boot menu, selected the dvd drive and you can hear it running, then it slows down to nothing and I get no recovery manager opening. I turned off the computer again and pressed f9 when I turned it on. Diagnostic show processor and memory are fine, but I get an error code of "BIOHD-8" on the hard drive. Any suggestions?

Daemon manager won't start

After doing a fresh install of Cisco Prime 4.1 and rebooting the server 'Cisco Prime Daemon Manager' service won't start. Startup type is 'Auto'. Server has been rebooted twice and I have tried 'net start crmdmgtd' without success.
C:\Users\NetAdmin>net start crmdmgtd
The Cisco Prime Daemon Manager service is starting.
The Cisco Prime Daemon Manager service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
C:\Users\NetAdmin>net helpmsg 3534
The service did not report an error.
C:\Users\NetAdmin>

I need to see following output:
> Output when you enter command : net start crmdmgtd (on command prompt)
> Last 100 lines of NMSROOT/log/syslog.log
> event logs, if anything pertainign to Ciscoworks processes.
Try following things as well:
# Make casuser a member of adminitrators group.
#Make sure you have swap properly and manually configured (twice of RMA):
1. Right click on "Computer" and select "Properties." Click on "Advanced System Settings."
2. Choose the "Advanced" tab and click "Settings," under "Performance."
3. Choose the "Advanced" tab and click "Change" under "Virtual Memory."
4. Uncheck "Automatically Manage Paging File Size" for all drives.
5. Click "Custom Size" and enter the amount of swap space in MB (megabytes). Click "Set" and then "OK" three times to return to the desktop.
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

Desktop manager won't start, sometimes

Edit: I have migrated from kdm to sddm and the problem is just the same.
I have a really weird problem with my laptop (Lenovo E335):
Sometimes, when I boot/reboot my laptop, kdm is started correctly, but other times (maybe more often) kdm won't start, and I need to login as root in a terminal, and run:
$ systemctl restart kdm
After doing this, kdm is always restarted correctly.
Whenever I boot/reboot the system, before kdm is started or fails, I see always these text lines in the console:
[FAILED] Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video
See "systemctl status systemd-backlight@backlight:acpi_video2.service" for details.
Starting Load/Save Screen Backlight Brightness of backlight:radeon_bl0...
[OK] Started Load/Save Screen Backlight Brightness of backlight:radeon_bl0.
When kdm fails, the boot process ends with this screen, and then I have to press Ctrl+Alt+F1 to open the terminal.
When this happens, these lines can be read in /var/log/Xorg.0.log:
(EE) Screen0 deleted because no matching config section.
(II) UnloadModule: "radeon".
(EE) Device(s) detected, but none match those in the config file.
(EE) no screens found(EE)
What puzzles me is that this only happens sometimes, apparently randomly.
--mod note: changed img tags to url tags. -- WorMzy
Last edited by fahrgast (2015-05-13 20:40:02)

Hi fahrgast, welcome to Arch.
Please take a moment to read through the forum etiquette, paying particular attention to the section titled "Pasting pictures and code".
https://wiki.archlinux.org/index.php/Forum_etiquette
Thanks.

[SOLVED]Modem-manager won't start with Network manager

Hi,
I have a problem with getting modem-manager work under gnome. After first Arch install to this laptop, Network manager didn't show my 3G-modem, so I installed modem-manager and usb_modeswitch. Modem is Huawei E367 and it works well with wvdial. Only problem is to get it working with Network manager.
From output of dmesg I see that there is an error, when Network manager is trying to start modem-manager:
[ 3224.705193] do_trap: 322 callbacks suppressed
[ 3224.705198] modem-manager[3112] trap int3 ip:7ff7baab4143 sp:7fff996e62b0 error:0
[ 3224.719275] modem-manager[3114] trap int3 ip:7f58f4c5e143 sp:7fffc82b2400 error:0
[ 3224.733880] modem-manager[3116] trap int3 ip:7f579dda4143 sp:7fff77910850 error:0
[ 3224.748789] modem-manager[3118] trap int3 ip:7ff752c6f143 sp:7fff8ae42e20 error:0
[ 3224.763501] modem-manager[3120] trap int3 ip:7fb4db83f143 sp:7fff3023cbf0 error:0
[ 3224.777865] modem-manager[3122] trap int3 ip:7fa17a33a143 sp:7fffc1628260 error:0
[ 3224.792165] modem-manager[3124] trap int3 ip:7f00a39fb143 sp:7fff075a0fb0 error:0
[ 3224.806603] modem-manager[3126] trap int3 ip:7f9a62e23143 sp:7fffc2ccfed0 error:0
[ 3224.820736] modem-manager[3128] trap int3 ip:7f3d2994d143 sp:7ffff2581340 error:0
[ 3224.834985] modem-manager[3130] trap int3 ip:7f5adda9a143 sp:7fff8a70a4a0 error:0
From /var/log/messages.log I found also something:
Apr 14 16:02:14 localhost NetworkManager[713]: <info> trying to start the modem manager...
Apr 14 16:02:14 localhost dbus[651]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
Apr 14 16:02:14 localhost dbus[651]: [system] Successfully activated service 'org.freedesktop.ModemManager'
Apr 14 16:02:14 localhost NetworkManager[713]: <info> modem-manager is now available
Apr 14 16:02:14 localhost modem-manager: libhal_ctx_init() failed: (null)
Apr 14 16:02:14 localhost NetworkManager[713]: <info> the modem manager disappeared
If I try to run modem-manager manually with debug:
$ sudo modem-manager --debug
** ERROR **: libhal_ctx_init() failed: (null)
Make sure the hal daemon is running?
So it seems to be because of hal isn't running, if I try to start hal daemon it fails:
$ sudo /etc/rc.d/hal start
:: Starting Hardware Abstraction Layer [FAIL]
I also tried to start hal at boot by putting it to DAEMONS in rc.conf. but didn't start either.
The laptop is Asus X61SL with x86_64 version of ArchLinux.
Kernel: 3.3.1-1-ARCH
Would be cool if anyone can solve this.
Last edited by Jompu (2012-04-14 20:42:20)

Thanks for your quick reply Strike0!
I ran lsusb and usb_modeswitch as you instructed:
[louis@Louis-Laptop ~]$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 002 Device 002: ID 045e:00dd Microsoft Corp. Comfort Curve Keyboard 2000 V1.0
Bus 003 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver
Bus 001 Device 006: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard
[louis@Louis-Laptop ~]$ sudo usb_modeswitch -v 12d1 -p 1506 -M '55534243123456780000000000000011062000000100000000000000000000'
Password:
Looking for default devices ...
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Accessing device 006 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x82 (in)
Not a storage device, skipping SCSI inquiry
USB description data (for identification)
Manufacturer: Huawei Technologies
Product: HUAWEI Mobile
Serial No.: not provided
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x82
Resetting message endpoint 0x01
-> Run lsusb to note any changes. Bye.
It didn't help. Network manager doesn't show anything related 3G.
I don't think it's usb_modeswitch since 3G stick works great with wvdial on same system. Could it be a bug on modem-manager?
I start only the Network manager on boot, but while Network manager tries to start modem-manager, it throws error continuously in dmesg. Error is the same as in first post.

NI-FBUS Communicat​ions Manager won't start when PCMCIA card is configured as Basic Device and Visitor address

Similar Messages

Maybe you are looking for

NI-FBUS Communications Manager won't start when PCMCIA card is configured as Basic Device and Visitor address