NI Variable Engine (tagsrv.exe) Runtime Error Dialog Upon Restart -- Resolved

After installing LabVIEW 2009, I started getting an error dialog when I restarted, and shared variables stopped working. So, I figured I'd post what I did to resolve it.
For forums searchability, here's the text:
Dialog Window Title:
Microsoft Visual C++ Runtime Library
Dialog Window Text:
Runtime Error!
Program: ...gram Files\National Instruments\Shared\Tagger\tagsrv.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information
=======
Here's the dialog:
I also noticed that the NIVE (National Instruments Variable Engine) service timed out when I manually tried to stop it.
So, I:
* Closed out of everything, opened Distributed System Manager 2009, and removed all processes (except for "System", of course)
* Restarted the PC
Visual C++ Runtime error is gone!
Message Edited by LabBEAN on 11-11-2009 10:02 AM
Certified LabVIEW Architect
Wait for Flag / Set Flag
Separate Views from Implementation for Strict Type Defs

Sorry to hear that. I've been there a few times myself. While you're going through that process, consider uninstalling EVERYTHING NI through Control Panel » Add Remove Programs. Running msiBlast (attached below) can clean out anything you missed.
As a last resort, you could call NI support (if you have support) and at least allow them to probe around. At a minimum, they can document this internally so maybe it's fixed at some point. If you go that route, request a CAR number and post it back here if they give you one.
Message Edited by LabBEAN on 04-23-2010 05:39 PM
Certified LabVIEW Architect
Wait for Flag / Set Flag
Separate Views from Implementation for Strict Type Defs

Similar Messages

Custom Runtime Error Dialog Always showing

Hi,
(TestStand 2.0.1f1)
Using the Callback based on the example C:\TestStand\Examples\Callbacks\PostStepRuntimeErrorCallback\ErrorHandlerExample.seq.
The error dialog always appears. I was expecting from the comment in the Set ErrorReport Flag that the Dialog would not appear again. (Comment: If this flag is set, TestStand does not send a UIMsg_BreakOnRunTimeError event to the GUI. This step sets the flag to prevent the GUI from displaying a runtime error dialog because this callback has already displayed a runtime error dialog to the user.)
When you use the default Error Reporting, you can check a checkbox so that Dialogbox is not seen again for the same execution. I was expecting the same thing from the SequenceFil
ePostStepRuntimeError callback.
Any clues as to whats going on.
See attached example.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
RuntimeError1.seq ‏52 KB

Hi,
In the Programmer Help for DisplayRunTimeErrorDialogEx method it says
"dontShowAgainForExecution Boolean Returns whether the user wants this dialog box to appear again if another run-time error occurs in the current execution. If this value is true, set Execution.RTEOptionForThisExecution to specify what to do on a run-time error for this execution."
Now I have tried setting each of the RTE Options (except the Display Dialog) to try get the same effect as not using the Callback for runtime errors when it comes to ignoring all further errors. Nothing seems to work as expected. So whats the engine doing extra thats not detailed in the Programmer Help or the examples provided.
Regards
Ray Farmer
Regards
Ray Farmer

URGENT: Bug in Adobe Acrobat X /// Acrobat.exe Runtime Error! R6025 - pure virtual function call

Hello
I work usually with large PDF documents, and I was trying to convert a PDF document of 1000 pages ONE THOUSAND PAGES, to little PDF documents of 10 MB each one.
When I tried to convert the PDF file into little ones, craaashhhhhhhhhhhhhhhhhh
I got this message:
Acrobat.exe Runtime Error! R6025 - pure virtual function call - Microsoft Visual C++ Runtime Library
This seems to be a BUG AS BIG A GRAND PIANO... so I would like someone from Adobe tell me how may I solve this problem or if they will release an update soon?
Thank you

This is a user to user forum and we don't post information here (or anywhere else public) about what may or may not be in future patch releases.
If you have a bug with an Adobe product you must report it using the correct form.

Runtime error dialog hidden by custom C# GUI

I have a sequence file that has a front end GUI written in C#. When the MainSequence is run, it calls ShowForm() on the C# GUI in a separate thread. The GUI is used to select which other sequences to run in the sequence file as well as display percent complete status, etc.
My problem is that if an error occurs, I do not see the Runtime error dialog until I close the GUI. Does anyone have any ideas on how to get the runtime dialog box to show while the GUI form is displayed? Or even some way to update the GUI to show there is an error?

The simplest solution might be to make the GUI transparent so you can see the form and what is behind it.
Set the forms Opacity property to %50 just before showing the form. (Form.Opacity = 0.5). You can adjust the forms transparency until your satisfied that you can see the gui and what is behind it.

Hotsync.exe Runtime Error R6025 on Windows/XP Treo/650

I'm running Windows/XP Home Edition with Palm Desktop ver 4/1/4 and Hotsync ver 6.0.1. I have a Sprint Treo/650 using Hotsync ver 5.4.0 (on the Treo) I recently activated my SprintPCS email account and I'm using VersaMail ver 3.1B When I Hotsync I get an abort message with this text: "Microsoft Visual C++ Runtime Library Runtime Error! Hotsync.exe R6025 - pure virtual function call" The Hotsync log lists: OK Quick Install; OK Adobe Reader; OK VersaMail; OK Media and then indicates: Protocol Error. Hanheld cancelled synchronization (4405). The handheld shows cancellation of Hotsync because the fatal error is already being displayed on the desktop.
Thanks in advance for your help.
Greg
Post relates to: Treo 650 (Sprint)

An easy way to reactivate hotsync is to go to Program Files -> Palm -> Hotsync.exe. Create a Hotsync.exe shortcut on your desktop. Click the shortcut and wait for 10 seconds. The hotsync function will come back. May have to do this frequently before fixing the root cause. Spyware software is a possible cause. Check the quarantine folder to see if any "Palm related" files are quarantined. If so, restore them. Hope this can be helpful.

Getconnected.exe runtime error

Hi!
When i execute the phone connection configurator (by the pc suite app or directly to getconnected.exe), a runtime error is raised, and i can't configure my phone.
I spent a lot of time installing and uninstalling both pc suite, toshiba bluetooth stack and vcredist. This error was present on the older versions of pc suite and bluetooth stack, so I wait to the newest (as you can see at the bottom info) but the error comes too with the new versions.
Help, please!
Kepa.
(sorry my poor english)
System info:___________________________
Phone: 2630 (well connected by bluetooth, i can send/receive files well)
Windows XP Pro X64 2003 SP2 (Intel)
PC Suite info:
>Solución de conexión a PC:
>Versión 8.15.0.0
>
>Nokia Connectivity Cable Driver:
>Versión 6.86.11.0
>Sistema operativo:
>Microsoft Windows XP Edición de 64 bits, Service Pack 2
>Idioma: español
>Idioma para programas no unicode: Español
>Navegadores de Internet detectados:
> - Microsoft Internet Explorer 7.0 (Navegador >predeterminado)
>Stacks Bluetooth detectados:
> - Microsoft (Versión: 5.2.3790, Compilación: 3959)
> - Toshiba ([Version: 6.0.7y19.0)
Error info:______________________
AppName: getconnected.exe AppVer: 6.86.74.2 ModName: msvcr80.dll
ModVer: 8.0.50727.1433 Offset: 000046b4

Yes, it is the version 6.86.9.3, but the prior version (6.85.14.1) give me the same error. Perhaps the connect part of the software (getconnected.exe) is the same...

Runtime Error Dialog at Startup Time

I posted a similar question many months ago, but I still have this problem - even after upgrading to 10.5.6 today. I have no idea where it is coming from or how to get rid of it, but apparently there is something trying to auto-launch in the background every time I restart the computer and the desktop comes up?
The dialog says:
Runtime Error
Location/Volumes/RBUS/REALbasic/REALbasic Xcode/../../Common/relocentry.cpp:3374
Failure Condition: functionPtr == oldRntry->code Failure Message:
Then I have a choice of QUIT or CONTINUE, but of course "CONTINUE" just causes the dilog to keep reappearing.

Have you tried uninstalling and reinstalling Real Basic?
http://www.realsoftware.com/download/
If it is something trying to start up then go to :
system Prefs> Accounts> select your account> login items
you should see a list of items which load at start up. You can add or delete items from that list...

Hpqgpc01.exe Application Error dialog on shutdown

When I shutdown, I get an error dialog saying that hpqgpc01.exe Application Error occurred at a particular address.
When I dismiss the dialog, shutdown completes.
What can I do to fix this?
This question was solved.
View Solution.

Tom R. posted this which worked for me:
For 64 bit systems. But you are probably running a 32 bit file system. So lets try this. Load your printer disc in your CD drive, then go to : START, CONTROL PANEL, PRINTER. Then right click on printer and go to properties. Go to SHARING. Click on CHANGE SHARING OPTIONS. Click CONTINUE. Go down to DRIVERS and click on ADDITIONAL DRIVERS. X64 is the 64 bit driver, but remember that you probably have the files loaded in your X86 file which is 32 bit . Leave the X64 file alone, but click the X86 file. Then close out the program. When you go back, the file should show both the X64 & X86 file as Type 3 User Mode INSTALLED-YES. When you power down the computer you will still see the hpqgpc01.exe file pop up because you will need to restart the computer for the change to take effect. But after that, you shouldn't see the error sign on your next shut down. Hope that helps. Let me know if it works for you.

PhotoshopElementsEditor.exe - system error dialog box states"The program cannot start because OnOneToolBox2.dll is missing from your computer. Try reinstalling the program to fix problem" I have uninstalled, then reinstalled both my Elements 10 and my O

ninstalled, then reinstalled both my Elements 10 and my OnOne Apps. several times, but keep getting the same message. please help me with this.ninstalled, then reinstalled both my Elements 10 and my OnOne Apps. several times, but keep getting the same message. please help me with this.

Oop I finally found the answer myself from the onOneSoftware.com website in the support area. the answer is :
Ononecorefoundation.dll Is Missing From Your Computer- Error Message
This error can occur if there are older plugins lingering in your plugins folder of Photoshop after installing Suite 8 and trying to launch Photoshop. To correct the error go to your: [Local Disk (C:)]\Program Files\Adobe\Adobe Photoshop CSx 64bit\Plugins:Delete
PS: I only deleted the old obsolete OnOne plugins,and left their newer plugins, That worked and now Elements 10 is working just fine

Runtime error - Session cannot be resolved to a type

Hello! I try to get JavaMail working, but all in vain.
The problem is I get such an error every time.
org.apache.jasper.JasperException: Unable to compile class for JSP:
An error occurred at line: 29 in the jsp file: /SendMail.jsp
Session cannot be resolved to a type
26:    prop.put("mail.smtp.host",hostMail);
27:    prop.put("mail.smtp.user",fromEmail);
28:    prop.put("mail.smtp.auth","true");
29:    Session ses = Session.getInstance(prop,null);
30:    ses.setDebug(true);
31:    MimeMessage msg = new MimeMessage(ses);
32:    MimeBodyPart m1 = new MimeBodyPart();
An error occurred at line: 29 in the jsp file: /SendMail.jsp
Session cannot be resolved
26:    prop.put("mail.smtp.host",hostMail);
27:    prop.put("mail.smtp.user",fromEmail);
28:    prop.put("mail.smtp.auth","true");
29:    Session ses = Session.getInstance(prop,null);
30:    ses.setDebug(true);
31:    MimeMessage msg = new MimeMessage(ses);
32:    MimeBodyPart m1 = new MimeBodyPart();
Stacktrace:
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:93)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:729)I'm using Eclipse, so I've added external JARs there (activation.jar, mail.jar, mailapi.jar, pop3.jar, smtp.jar). In addition to this, the same libraries are in +/opt/jdk1.6.0_13/jre/lib/+.
I've imported javax.mail.*, java.util.*, javax.mail.internet.* in my JSP file. I tried to do a lot of manipulations. Also I tried to use different code examples, but the error in the line "Session.getInstance(props, null)" remains the same.
   Properties prop = new Properties();
   prop.put("mail.smtp.host",hostMail);
   prop.put("mail.smtp.user",fromEmail);
   prop.put("mail.smtp.auth","true");
   Session ses = Session.getInstance(prop,null);The same problem remains when I do this as a Servlet. Class compilation with javac occurs without errors.
Might the problem be in version compatibility? I use: ArchLinux, Tomcat 5.5, JavaMail 1.4.2.
Thanks in advance.
Edited by: Pavel_Z on May 7, 2009 4:55 PM

Now I am confident that the problem is with library including, as the same thing happens with other libraries.
I found that such a warning appears every time:
Classpath entry /jspbook/src/lib/mail.jar will not be exported or published. Runtime ClassNotFoundExceptions may result.Unfortunately, I've no idea how to include this in a proper way. I think that setting it in "Add External JARs" in "Java Build Path" is enough... or not?
Seems we're close to solve the problem. May be this screen shot will be helpful to determine the problem?
http://img257.imageshack.us/img257/3967/screenshotjavaeejspbook.png
You can see that libraries are included in the Project Explorer

Disable Error Dialogs in LV DSC Engine 6.1

I am having a frustrating experience trying to disable error dialogs on the DSC Tag Engine. My simple goal: to make sure that every time the engine is started, the "Error Dialogs" checkbox (seen in the Engine Manager) is disabled. It should be possible to edit the INI files or use the options menu to disable error dialogs, but it appears that the engine simply ignores these settings. I think it works fine on 6.0.2, but is easily reproducible on my LV 6.1 machine:
1. Run LV 6.1
2. Open the Tag Configuration Editor
3. Create a new, default, empty SCF file
4. From the Tag Configuration Editor, choose TOOLS>OPTIONS and make sure that Enable Error Dialog = False ... this should set an INI setting in lvdsc.ini. If you exit LabVIEW and open it again, LV will properly read the INI file so that this will remain False. That's good.
5. But now start the Tag Engine and double-click on the sys-tray icon to show the Engine Manager. You will notice that Show Error Dialog checkbox is checked (ON).. this means it will show error dialogs. Why is that? I have already siabled error dialogs?
6. So then... un-check the "Error Dialog" box in Engine Manager.
7. Stop and Exit the engine completely (it doesn't matter if you exit LV or not.. you get the same result). Now run the Tag Engine again and open the Engine Manager... You will notice that Error Dialog option is automatically re-enabled (ON).
Note: I am certain the ini files are NOT read-only and that Win2000 has given EVERYONE the FULL CONTROL permission to my LV6.1 folder. I am logged in as Administrator and I installed LV and DSC when logged in as Administrator.
Summary: It is impossible to permanently disable error dialogs in DSC 6.1 ... AND the INI setting "Show Error Dialogs" has absolutely no purpose since the Engine automatically re-enables error dialogs every time you load and run it. In addition, it is not possible to programmatically disable error dialogs.
Question: How can I permanently disable error dialogs on the DSC Engine? If its impossible, how can I programmatically disable it (from a VI)? These INI settings have no effect:
userErrorDialogs=FALSE --- in lvdsc.ini
enableErrorDialog=FALSE --- in DSCEngine.ini

John Paul,
National Instruments is aware of this problem and should be able to fix it for the next version. The problem is that the setting is stored in dscengine.ini but it is read from the lvdsc.ini. - what a silly bug
The only way to workaround for now would be to create a key in lvdsc.ini in the section [LVDSC] with enableErrorDialog=FALSE.
Hope this help
Roland

Setting Romanian regional runtime error

Setting Romanian regional items at install time makes you unable to login in vista: LogonUI.exe runtime error
Model: Satelite Pro u400 -13k .
Problem steps :
Start preinstalled vista setup,ftom a u400-13k,
when prompted change to Romanian Regional settings
result : after completing vista setup, LogonUI.exe crashes with Microsoft C++ Runtime exception dialog.
Solution:
Reboot in safe mode then burn the recovery media.
Restrat setup then do not change regional settings.
Hope this helps other customers until it is fixed.
To Toshiba QA Team : I spent almost 4 hours to workaround your untested product. Please at least fix this bug for other customers, as time is important for anyone. I guess this may be related to fingerprint logon application not being localized correctly .
Regards .
sandi_ro.

>>Purchased in Bucharest, Romania.
You may want to also post a message in the Toshiba Europe forum.
Jim

Illustrator cs2起動時の「Runtime error!」について

OS:WinXP
Illustrator CS2を利用しています。
昨日まで正常に起動していましたが、
本日より起動時に
「Runtime error!
Program: ...ratorCS2¥SupportFiles¥Contents¥Windows¥Illustrator.exe
This application has requested the runtime error to terminate it in an unusual way
Please contact the application's support team for more information.」
と表示されるようになり起動できなくなりました。
Illustratorを再インストールしましたが、
解決しません。
解決策をご教示いただければ幸いです。
よろしくお願いいたします。

「Illustrator.exe Runtime error」でネット検索すると、質問者は同じ日にYahoo知恵袋にも投稿したらしい（投稿文が同一）。
その日のうちに回答があり、その結果、アンインストール後に「C:¥Program Files...Illustratorのインストールされているフォルダを削除」で解決したとしている。
「解決済み」のアイコンも立っている。

Photoshop Elements 10 "C++ Runtime Error" message on Windows Vista

I'm running Photoshop Elements 10 on Windows Vista, and recently when I launch the app a C++ Runtime Error dialog box appears. When it's closed the program immediately exits, and will not allow me to enter the program. How can I get past this issue?

Please let me know if you find a solution

Runtime Error For Converting Static pdf to Dynamic Xml Form pdf

Hi All,
I am converting my static pdf to dynamic xml form pdf using Adoble Livecycle Designer ES 8.2 it is giving runtime error dialog.
My static pdf size is 12MB and it contains 46 pages(mostly all pages will have images). Do we have any limitations for converting static pdf to dynamic xml form pdf ?
Error message image file is attatched to this thread.
Can any body please help me on this.
Advance Thanks
Prasad Sagala

Hi Paul,
With out dividing into smaller chunks, Do we have any other alternative?
Because in my other pdf reports having more than 50 pages (in between 100-600). If i want do divide smaller chunks it will be the long process.
Thanks
Prasad Sagala

NI Variable Engine (tagsrv.exe) Runtime Error Dialog Upon Restart -- Resolved

Similar Messages

Maybe you are looking for