NIEHOST_UNKNOWN error when calling any CREATE BAPI

Dear all,
I have a .NET application that will create sales order in SAP by exposing the "create sales order" BAPI WSDL to SAP. However, when the .NET application got executed, nothing was returned back to the .NET app. And when I checked the trace file in ICM, the following error message is displayed:
[Thr 3496] *** WARNING => Connection request from (0/1/0) to host: P25214, service: 1090 failed (NIEHOST_UNKNOWN)
[icxxconn.c 2114]
However, when the .NET application consume the web services from SAP with Getting the sales order data (GETLIST and GETSTATUS), data is returned back to the .NET application. Are the setup in ICM any different between the different interfaces (meaning, are there differences between an inbound and an outbound communication?)?
The current setting in ICM is: I have activated RFC and SOAP.
Any help on this is greatly appreciated.
Thanks!
Cheers,
Cyanna

By using transaction OAC0, delete the entry HME_CONTENT then by using transaction OACT, delete the entry HME_CONT. This should eliminate the following error:
[Thr 03] *** WARNING => Connection request from (0/1/0) to host: P25214, service: 1090 failed (NIEHOST_UNKNOWN)
[icxxconn_mt.c 2114]
Good luck.
Raja M. Ahmed
[email protected]

Similar Messages

Error when calling ejb.create() call

Hi Folks,
I am trying to create a simple CMP bean with J2EE1.4 but when I call ejb.create I get the following exception :-
Exception in thread "main" java.rmi.ServerException: RemoteException occurred in
server thread; nested exception is:
java.rmi.RemoteException
at com.sun.corba.se.internal.iiop.ShutdownUtilDelegate.mapSystemExceptio
n(Unknown Source)
at javax.rmi.CORBA.Util.mapSystemException(Unknown Source)
at com.titan.customer._CustomerHomeRemote_Stub.create(Unknown Source)
at Client.main(Client.java:20)
Caused by: java.rmi.RemoteException
at com.sun.enterprise.iiop.POAProtocolMgr.mapException(POAProtocolMgr.ja
va:195)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:73
9)
at com.titan.customer.CustomerBean_986018080_ConcreteImpl_RemoteHomeImpl
.create(CustomerBean_986018080_ConcreteImpl_RemoteHomeImpl.java:38)
at com.titan.customer._CustomerBean_986018080_ConcreteImpl_RemoteHomeImp
l_Tie._invoke(Unknown Source)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispa
tchToServant(CorbaServerRequestDispatcherImpl.java:648)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispa
tch(CorbaServerRequestDispatcherImpl.java:191)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest
Request(CorbaMessageMediatorImpl.java:1655)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest
(CorbaMessageMediatorImpl.java:1514)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(C
orbaMessageMediatorImpl.java:896)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.call
back(RequestMessage_1_2.java:172)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest
(CorbaMessageMediatorImpl.java:668)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatc
h(SocketOrChannelConnectionImpl.java:352)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.read(So
cketOrChannelConnectionImpl.java:261)
at com.sun.corba.ee.impl.transport.ReaderThreadImpl.doWork(ReaderThreadI
mpl.java:73)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.
run(ThreadPoolImpl.java:382)
Bean code :-
package com.titan.customer;
import javax.ejb.EntityContext;
public abstract class CustomerBean implements javax.ejb.EntityBean {
public Integer ejbCreate(Integer id) {
setId(id);
return id;
public void ejbPostCreate() {
//abstract methods
public abstract Integer getId();
public abstract void setId(Integer Id);
public abstract String getLastName();
public abstract void setLastName(String lastName );
public abstract String getFirstName();
public abstract void setFirstName(String firstName);
public void setEntityContext(EntityContext ec) {}
public void unsetEntityContext() {}
public void ejbLoad() {}
public void ejbStore() {}
public void ejbActivate() {}
public void ejbPassivate() {}
public void ejbRemove() {}
ejb-jar.xml
<?xml version="1.0" encoding="UTF-8"?>
<ejb-jar version="2.1" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd">
<display-name>CustomerBean</display-name>
<enterprise-beans>
<entity>
<ejb-name>CustomerBean</ejb-name>
<home>com.titan.customer.CustomerHomeRemote</home>
<remote>com.titan.customer.CustomerRemote</remote>
<ejb-class>com.titan.customer.CustomerBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>false</reentrant>
<cmp-version>2.x</cmp-version>
<abstract-schema-name>CustomerBean</abstract-schema-name>
<cmp-field>
<description>no description</description>
<field-name>firstName</field-name>
</cmp-field>
<cmp-field>
<description>no description</description>
<field-name>id</field-name>
</cmp-field>
<cmp-field>
<description>no description</description>
<field-name>lastName</field-name>
</cmp-field>
<primkey-field>id</primkey-field>
<security-identity>
<use-caller-identity/>
</security-identity>
</entity>
</enterprise-beans>
</ejb-jar>
sun cmp mapping
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-cmp-mappings PUBLIC "-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 7.0 OR Mapping //EN" "http://www.sun.com/software/sunone/appserver/dtds/sun-cmp-mapping.dtd">
<sun-cmp-mappings>
<sun-cmp-mapping>
<schema>CustomerBean_jar</schema>
<entity-mapping>
<ejb-name>CustomerBean</ejb-name>
<table-name>CUSTOMERBEAN</table-name>
<cmp-field-mapping>
<field-name>firstName</field-name>
<column-name>CUSTOMERBEAN.FIRSTNAME</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>id</field-name>
<column-name>CUSTOMERBEAN.ID</column-name>
</cmp-field-mapping>
<cmp-field-mapping>
<field-name>lastName</field-name>
<column-name>CUSTOMERBEAN.LASTNAME</column-name>
</cmp-field-mapping>
</entity-mapping>
</sun-cmp-mapping>
</sun-cmp-mappings>
sun-ejb-jar.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 8.0 EJB 2.1//EN" "http://www.sun.com/software/sunone/appserver/dtds/sun-ejb-jar_2_1-0.dtd">
<sun-ejb-jar>
<enterprise-beans>
<name>CustomerBean</name>
<unique-id>579688304</unique-id>
<ejb>
<ejb-name>CustomerBean</ejb-name>
<jndi-name>CustomerBean</jndi-name>
</ejb>
<pm-descriptors/>
<cmp-resource>
<jndi-name>jdbc/Vineeth</jndi-name>
<create-tables-at-deploy>true</create-tables-at-deploy>
<drop-tables-at-undeploy>true</drop-tables-at-undeploy>
<schema-generator-properties>
<property>
<name>use-unique-table-names</name>
<value>true</value>
</property>
<property>
<name>java-to-database</name>
<value>true</value>
</property>
</schema-generator-properties>
</cmp-resource>
</enterprise-beans>
</sun-ejb-jar>
Can someone please help me out with this...this is a bit urgent..
Thanks

It seems that u need a ejbPostCreate with the same parameters as ejbCreate:
public Integer ejbCreate(Integer id) {
setId(id);
return id;
public void ejbPostCreate(Integer id) {
}

An error when calling DAQmx from TestStand

Hi,
I get very mystic error when calling DAQmx Create Channel (Digital input) and DAQmx Read (Digital Bool 1Line 1Point) vis. Difficulty is that it does not occur every time. It is random. Any ideas what might cause this error? I uninstalled Traditional DAQ drives because they are not in use but it does not help.
Please, see attachment.
BR,
Jick
Attachments:
daqerror.PNG ‏80 KB

Here is some additional information. See attachments.
I can not get that error using MAX or looping it only. There is something else outside which causes the error. It can not be Traditional DAQ because I uninstalled it. These vis are running in a loop during the test in the batchmodel.
BR,
Jick
Attachments:
daqerror2.PNG ‏33 KB
daqerror3.PNG ‏15 KB

Runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's

Hello colleagues,
I always get the runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's
For instance, lets take Function Modules:
I tried almost any of them but in particular:
GRPC_API_CONTROL_QUERY Load the list of controls
GRPC_API_ISSUE_QUERY Retrieve issues of the case
GRPC_API_ORGUNIT_QUERY Load list of Organizations
GRPC_API_RMPLAN_QUERY Retrieve remediation plans of case
GRPC_API_RISK_CONTROLS Retrieve the controls of the risk
and etc.
All of them return the runtime error OBJECTS_OBJREF_NOT_ASSIGNED, however I've provided Object ID's in the right format,
The same is for corresponding classes,
Does anyone have such problem before?
Appreciate your responses,
Thank you,
Best Regards,
Anton

Hi Anton,
We need to pass value for I_SESSION_ID. Because, when i execute FM: GRPC_API_RMPLAN_QUERY by giving correct I_OBJECT_ID as shown below, i'm also getting the same error.
On executing..
Getting following dump.
And attached is the dump analysis .
Thanks
KH

Error when trying to create a site collection

Hi,
I receive the following error when trying to create a site collection in sharepoint 2013. Any ideas of what I can do to resolve?
Sorry, something went wrong
Failed to call GetTypes on assembly Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.ConnectionUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.RequestUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.LoadUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.UnloadUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation.
thanks,
Sherazad

Hi ,
Based on the error message, please check whether you have installed the spPowerPivot.msi add-in on each of your SharePoint server, and ran the configuration wizard, make sure that the powerpivotwebapplicationsolution.wsp
is deployed correctly.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

401 Unauthorized Error When calling a SharePoint REST web service from SharePoint 2013 Workflow

We have our Workflow Manger installed on the same server as our SharePoint 2013 WFE development environment. When creating a SharePoint 2013 Workflow all Calls to a SharePoint 2013 REST web service results in a 401 Unauthorized error.
As an example I created a simple workflow that should return a JSON result. The REST Url returns the results in the browser without error.
Set Variable:webServiceUrl to https://<hostnamedsitecollection>/_vti_bin/client.svc/web/lists/getbytitle('ISR%20Approvers')/Items?$select=Title&$filter=Title%20eq%20%27General%27
then Build{...} Dictionary (Output to Variable:requestHeaders)
then Call [%Variable:webServiceUrl%] HTTP web service with request (ResponseContent to Variable:responseContent |ResponseHeaders to responseHeaders | ResponseStatusCode to Variable:responseCode)
The RequestHeader is set to the requestHeaders variable though the web service call properties
then Log Variable:responseCode to the workflow history list
After manually running the workflow in SharePoint on a list item in the ISR Approvers list it Logs "Unauthorized" in the Workflow History Log. It does this with every SharePoint REST web service call that I have tried through the workflow.
It doesn't have anything to do with the Workflow Manger being installed on the same machine as the SharePoint WFE does it?
Thank You for any insight

Hi,
According to your post, my understanding is that you had 401 Unauthorized Error when calling a SharePoint REST web service from SharePoint 2013 Workflow.
Please make sure you use the ‘Call HTTP Web Service’ correctly.
You can enter the URL into the brower to check whether it is correctly.
You need to
create the Request header requestHeaders
using a Dictionary:
Accept : application/json;odata=verbose
Content-Type : application/json;odata=verbose
To associate the
requestHeaders variable, select the Call action
property, set the RequestHeaders property to
requestHeaders.
Please refer to the following articles:
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013
Calling the SharePoint 2013 Rest API from a SharePoint Designer
Workflow
In addtion, you need to make sure you install the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Known Issues in Workflow Manager 1.0
Troubleshooting Workflow Manager 1.0 Management and Execution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Getting Msg: Error when calling Credit Management: Technical Error

Hi All,
While creation of sales order in ECC, i am getting a message "Error when calling Credit Management: Technical Error"
Can you help me in this case
Regards,
Satish

Satish,
Just so you know, this BADI "links" SD module to FSCM credit management. If you use the right code in this BADI, it copies over credit information on to the sales order such as Credit Account, Risk Class and Credit representative code. (Later this risk class, order's credit control area and credit group is used to look up the appropriate line in OVA8 settings)
Now you could be getting this error for any of the issues:
1. If the business partner is not created for the customer for which you're trying create a sales order (The credit account (sales order header) should have a relevant BP already) Check if the BP is correctly created.
2. Next if the credit data has been maintained for the BP in credit management.
3. XI/PI connectivity issues etc
Check if all this is maintained and you should be good. Cheers

Error when attempting to create new Crystal Report against SAP BW

We're getting an error when attemptiing to create a new report using the SAP toolbar in CR:
"Failed to retrieve SSO2 logon ticket. Please contact your BW administrator".
Any ideas? We're able to run existing reports fine. Just can't create new ones using the toolbar.

Hi,
but you do realize that it is a pre-requisite ?
your BW system needs to be configured for reading and generating SSO token
Ingo

Error when trying to create a JCO Destination

Hi
I receives the following error when trying to creat a JCO Destination, clicking on the button in the host:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
Error stacktrace:
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:880)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:223)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:620)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:263)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:740)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:350)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Any ideas?
Regards
Kay-Arne

Hi,
Have you configured your SLD? Check JCO Destination error out or search for "com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus" in the SDN forums.
Best regards,
Vladimir

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
when browsed through some of the messages they point to setting Oracle Wallet Manager.
I am trying to connect
Any idea on how to resolve this issue ?
your input is appreciated.
Thanks
Ravi

Duplicate post ... please ignore.

ORA-03115 error when calling a Stored Procedure

Hi All,
I'm in the process of porting a Pro/C app from NT to Linux. I've installed 8.1.5 on our Linux box and patched it up to 8.1.5.02.
It all kind of works ok, except that I'm sometimes getting ORA-03115 errors when the app calls a stored procedure. The call in question looks like this:
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR resprows[50][3998];
int numret = 0;
int numrows= 50;
int done= 0;
unsigned long resp_id = 0;
EXEC SQL END DECLARE SECTION;
EXEC SQL AT DB_NAME EXECUTE
BEGIN pkg_something.getdata(
:resp_id, /* IN */
:numrows, /* IN */
:done, /* OUT */
:resprows, /* OUT */
:numret /* OUT */
END;
END-EXEC;
The stored procedure basically uses the resp_id value to select rows from a table;
in each row there is a VARCHAR2(4000) column which it copies into the hostarray resprows.
There may be anything from 1 to numrows returned from the SP.
Initially, the resprows rows were defined to be size [4000]. Unfortunately, this caused ORA-02005 errors - I then changed the size to [3998], which seemed to fix the 02005's (although I'm unclear as to the reasons why).
Now I'm getting the 03115 errors when calling the SP. The oracle manual is not very helpful on what this error means.
This all works chipper on NT.
Any ideas?
Thanks in advance,
Nigel.
PS: The database the app is talking to is still hosted on NT.
null

Histon FTM wrote:
ORA-04063: package body "LAZARUS.LAZARUS" has errors Above, obviously conflicts with the statement that follows:
>
The procedure and package have both compiled without errors and the statement on its own works fine in SQL*Plus.I suggest you take a look in the USER_ERRORS view to see, what the errors are.
And just checking:
You have schema called LAZARUS, which holds a package named LAZARUS, which holds a procedure called POPULATEGRIDPOSITIONS?
Edited by: Toon Koppelaars on Oct 1, 2009 5:55 PM

Solution to stop error when trying to create a portfolio

Hi all,
I finally found a way to make a portfolio in acrobat pro 9. The problems I was having were explained in the thread titled "Acrobat pro 9 has a stop error when trying to create a portfoloi"
It seems ther is another way to do this, by selecting 'combine' and then 'merge files into a single pdf' rather than 'assemble pdf portfolio'.
The merge option also gives the choice of making a pdf package and does not result in a stop error with authplay.dll.
So much for Adobe support who conuld not tell me this or respond to support requests.
All I have to do now is to remember to not click on 'assemble pdf portfolio' when I want to assemble a pdf portfolio but "merge files into a single pdf" when I want to assemble a pdf portfolio.
I would still like to hear from Adobe why acrobat pro 9 has a stop error with authplay.dll.
I feel a lot happier now.

I read through the pdf wth your emails to/from customer support. I'll have to defer to someone else because it seems you have tried what I would suggest.
If someone else does not respond with a better plan and you are willing to spend a bit more time before writing off Acrobat 9, I would try the process below one last time. (If you are using a CS suite, while authplay.dll is found in each of the directories, it does not appear that the issue extends to the other programs.)
1. Using Add/Remove Programs, uninstall all Adobe Acrobat and Reader software and uninstall the Adobe Flash Player Active X and Adobe Flash Player Plugin. If you have it, uninstall Adobe Air.
2. In C:\Documents and Settings\(your profile name)\Application Data\Adobe, delete the Acrobat and Adobe PDF folders if they still exist.
3. Reinstall only Acrobat 9.
4. From Acrobat, run the updater Help > Check for Updates and install all updates.
5. Verify Adobe Acrobat is now version 9.2: Help > About Adobe Acrobat Pro (If for any reason it is not 9.2, use the update on http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
6. Test
Message was edited by: Anna Nmty
While searching for a solution, I just saw your post over at acrobatusers.com (http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=15765). Looks like my advice was largely a duplicate, although your event log indicates Acrobat did not update properly.

500 internal server error when trying to create users

I am getting a 500 internal server error when trying to create users. What is the cause? We tried reinstalling the latest java jdk release and that didn't help.

Check whether your DBControl or ASControl service is still running or crashed. EM is not able to connect to the Management Server.
For instance in Windows, you may see that the Servise is not started. Then check for error logs in $ORACLE_HOME/sysman/logs for any related error messages in the log files

ERROR: Error when calling IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN

Hi,
We are having a problem in processing (receiving) an idoc through our RFC client in SAP .
The RFC Client is up and running however, turns red while processing a certain Idoc.
The error occured:
Error when calling IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN (IDoc /).
This issue has been occurring since August 18-23. if the status of the RFC client is green, its shows: Waiting for IDOC.
My questions would be:
1) If for example, there are 50,000 idocs that are being sent and the first 1000 contains an error, will it still process the 49,000 idocs left through RFC client?
2) what are the possible errors of an idoc which causes the RFC client to be down (having the error above)? is it the format of the idoc? or the idoc_type itself?
3) another instance would be, if they are resending the idocs again, the RFC will be up eventually and we'll be able to receive the idocs. what are the causes for this?
4) are there any ways to track these idocs (which contains the error) in BODI or in SAP?
5) what are the alternative ways of processing the idocs that contains an error?

I think there is a misspelling in your IDOC type (in header of IDOC probably)
or the IDOC type does not exist on your SAP system
you call function IDOCTYPE_READ_COMPLETE remotely on SAP server and this falls into error with exception 1 (OBJECT_UNKNOWN)

NIEHOST_UNKNOWN error when calling any CREATE BAPI

Similar Messages

Maybe you are looking for