NISE unable to complete 1193 RF Switch routes

I'm having NISE problems.  I have configured two 1193 RF switches to be in independent mode.  I have configured a hardwire between com0 of the first switch (rf_1) to channel 7 of the second switch (rf_2).  I am trying to connect a route that will go from rf_1/ch0->rf_2/com0.  So basically I have daisy chained the two rf switches.  The problem is that when I click on the routes to connect, NISE just hangs there.  It seems to be trying to configure the path between the two end channels but nothing happens.  Under the Windows task manger it shows that NISE is using about 50% of the CPU, so it is still running doing something.  I have let it run for about 45 minutes and no changes.  It is only suppose to be determining the path for the routes but it is taking an extremely long time.
What could be the problem?  If I manually enter the paths it accepts it and is able to validate the path but it cannot do it on its own.  Any idea what's going or how I can fix this problem?

You are asking something to NISE that will take a very very long time. They are tons of route paths NISE needs to try in order to find the right path. The independent topology should not be used in this case.
If you are only routing channels to coms, you should be using a Mux topology and you should mark some intermediate channels as reserved for routing. 

Similar Messages

  • E72 - "Unable to Complete Command"

    Dear all - I just bought a new e72. Waited months for it, and now i am horribly disappointed. It syncs okay with Microsoft Outlook, mail, calendar, contacts. But, everytime i try to compose a new message, or reply, or forward, the message "Unable to Complete Command" pops out.
    Can somebody help me please? I am running Microsoft Exchange as mail server. Thanks.

    I have a SOLUTION!!!
    Called NOKIA support and they were ZERO help. Only thing they could do for me was to reset my Nokia Messaging service from Expired to active again.
    So to summarise:
    I had the problem that I could not send email (either create, reply or forward) from my E72 connected to my Google Apps Premier Account via Mail for Exchange. I wanted to have my calendar and contacts synchronised and PUSH email on the phone. 
    The other symptom of the problem was that I could only see my inbox and my deleted items folders when I tried to select a different folder. There were no sent items, outbox or drafts folder.
    The solution was:
    reactivate my Nokia Messaging service online - this had expired
    check the settings on your Nokia Messaging service to make sure you have set-up the email account you would like to have push email for
    create a new mail account using Mail for Exchange on the phone. Use the settings as specified by Google, i.e. the server is m.google.com with your username, password etc.- make sure you select that you want to sync calendar and contacts via MfE
    switch OFF the email synchronisation with MfE by going to the settings while in the email inbox, selecting settings and disable the email synchronisation
    create a new email account using the Gmail option in email setup. This will set up an IMAP account that will connect using Nokia Messaging and deliver push email. The most important thing is that this will create another email inbox THAT WORKS!
    Now I have push email from the IMAP/Nokia Messaging service and sync for calendar and contacts from the MfE service. A little clumsy, but it works and thats the main thing!
    Enjoy!

  • Time capsule won't back up - Unable to complete backup. An error occurred while creating the backup folder. Any ideas?

    I have tried all the resets, the firmware is the latest version, the green light is on.
    But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
    Any ideas?

    Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
    Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
    Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
    Reset the TC again.. sorry.. !! You're welcome ... done.
    Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
    You need to open the network preferences to find out. Yep - that's good ...
    ****** I then reconnect the TC WAN to the router - is this right?
    And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
    The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
    Then open the airport utility and you should be able to setup the TC.
    Do as little setup as possible and then run the TM backup and see how it goes.
    I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
    So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
    I named network RFG, named device RFGTC.  RFG network shown as IP 192.168.0.72
    Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
    I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link.  All are effectively connected to the BT Homehub - is there a conflict there?
    Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
    And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ...

  • Time Machine Error. Unable to complete backup. An error occurred while copy

    I purchased my iMac 24" in February.
    After I had set up the machine I configured an IceCube Firewire 300 GB (Seagate) Hard Drive as a backup volume and flicked the switch in Time Machine. All went as expected. I even restored my whole hard drive from the Time Machine volume about a month ago after I repartitioned the boot volume to set up Boot Camp. No problems.
    About a week ago I purchased a 500GB WD HDD and set it up inside the IceCube enclosure (I remembered to make it the "Master" disk too!!). I partitioned it with Disk Utility with a GUID Mac OS X (Journaled) partition for my Leopard boot partition, and as MS-DOS FAT32 for my Boot Camp external partition. I used Carbon Copy Cloner to copy all the Windows files across from Boot Camp to the new FAT32 partition and set up Time Machine to make a backup of the Leopard boot partition.
    After several hours Time Machine stopped with the error message above. ("Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup").
    I have spent days formatting the new WD drive, repairing permissions on the boot drive, excluding large files and cache files from the backup in Time Machine to no avail. Every time I get the same message. I even set up another 200GB firewire drive to see if it was anything to do with the enclosure of WD HDD. Same result!!
    I have searched these forums for any ideas, and have done wide searches with Google but nothing has worked.
    I can not understand why my Mac worked perfectly with Time Machine before I installed the new Western Digital Hard Drive.
    What have I missed?

    I keep getting the Time Machine backup error too, like many others. Was fine until just the other day, now, nothing. Although my husband's backs up just fine. I assume it's the 10.5.3 bug everyone else has. I've tried reselecting the drive, running the disk utility, shutting everything on and off... help!
    Here's the console log- anyone know what this means?
    Jun 10 08:37:27 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Starting standard backup
    Jun 10 08:37:27 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Network mountpoint /Volumes/Library not owned by backupd... remounting
    Jun 10 08:37:27 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Network volume mounted at: /Volumes/Library-1
    Jun 10 08:37:43 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Disk image /Volumes/Library-1/Tiffany Danko’s Computer (2)_001b63baf698.sparsebundle mounted at: /Volumes/Backup of Tiffany Danko’s Computer (2)
    Jun 10 08:37:43 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Backing up to: /Volumes/Backup of Tiffany Danko’s Computer (2)/Backups.backupdb
    Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Failed to create progress log file at path:/Volumes/Backup of Tiffany Danko’s Computer (2)/Backups.backupdb/Tiffany Danko's computer (2)/2008-06-09-065427.inProgress/.Backup.234797868.792920.log.
    Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Event store UUIDs don't match for volume: Macintosh HD
    Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Error: (-36) Creating directory 77B4FA27-3E65-4B81-897C-610DEE7BB187
    Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Failed to make snapshot.
    Jun 10 08:37:53 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Backup failed with error: 2
    Jun 10 08:37:58 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Ejected Time Machine disk image.
    Jun 10 08:37:59 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Ejected Time Machine network volume.

  • For the last 3 months only, I am unable to complete my online payments on your website.  I get as far as method of payment, check the box, and click next.  Then nothing happens.  What gives.  I have to then pay by phone.  Just frustrating.

    For the last 3 months only, I am unable to complete my online payment on your website.  I get as far as Method of Payment, mark it, and then lick on NEXT and nothing happens.  What gives?  Have to pay it by phone.

    Sheesh. That looks hard. I think it will fall over at this point:
    "Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
    Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
    With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
    I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

  • HT3275 This help article says Red "i" message: "Unable to complete backup. An error occurred while copying files to the backup volume."  Restart, then try the backup once again."  OK, I've done that a few times and still receive the same error message. No

    My Time Machine backup is repeatedly failing -- instead I receive a message saying it's unable to complete backup because an error has occured.  The only "Help" advice is to restart the computer and try to back up again, but that did not solve the problem. Help, please?

    Restart the whole network.. not just the computer.. restart in correct order with everything off.
    modem
    TC or router
    clients
    2min gap.
    If you still have trouble, give us the whole network layout.. what broadband? what modem? any other router? are you using wireless? what mode is the TC in?
    I am assuming you are using a time capsule.

  • I'm unable to completely download the latest iphone software verison 5.0.1 with itunes 10.5.2.11, downloading fails with 100kb left (err = -3259).

    Hello,
    I'm unable to completely download the latest iphone software verison 5.0.1 with itunes 10.5.2.11, downloading fails with 100kb left (err = -3259). Any suggestion on how to resolve this? I manually cleaned the DNS cached as well as directly connecting my pc to the cable modem instead of the router.

    Thank you for your response.  But unfortunately there's no Apple Genius Bar here in Malaysia.  Only resellers, which I feel that they are charging way too much in the first place.

  • Time machine error unable to complete backup. an error occured

    Hi All,
    I have a question: i try to set up timemachine. Everything seems to work. but i cant get the first backup, it gives me the follow error: time machine error unable to complete backup. an error occured while copying files to the backup volume
    My setup: an internet wireless router with a ethernet connection. On the ethernet connection i have a FreeCom Network Drive.
    The Freecom Network drive have fat32, i think i cant format the netwerk drive cause there is some software on it, that give me access to my network drive via lan.
    I configure that i can have acces to my netwerk drive. I can setup it from Time Machine, and Time Machine starts to put data on my network drive. After a while (mostly between 500mb-1,2 GB) it gives me the follow error: time machine error unable to complete backup. an error occured while copying files to the backup volume.
    What to do???

    Hi Norm,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    (Repair both Drives)
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Cisco Unity Connection 8.5 : The system is unable to complete your call

    Hi guys ,
    I am facing a probblem with my CUC 8.5 , everything works fine till i've installed a french locale.
    Now, when i want to send a message to a mailbox, the system response is : Translation from french : The system is unable to complete your call.
    The strange thing is when i go to general configuration and i switch back to english , the message is sent succesfully.
    Thank you in advance

    Which specific version of the UC are you running?
    I am having the same problem but with the spanish locale.
    Maybe you have to look at: https://supportforums.cisco.com/thread/2090981
    Regards,
    MM

  • I am unable to complete Synching with my IPhone 4S as it tells me reason is that Apps are unable to be determined on my phone however all of them Purchased from I Tunes. Can someone assist me with a Solution

    I am unable to complete Synching with my IPhone 4S as it tells me reason is that Apps are unable to be determined on my phone however all of them Purchased from I Tunes. Can someone assist me with a Solution

    You can't merge accounts. But you can check your purchase history:
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers
              http://support.apple.com/kb/HT2727
    Also, what may seem stupid to you... may be a protection of privacy to others.

  • Unable to complete installation of imo

    unable to complete installation of imo
    it givs pending ...

    Hi,
    This :- ?
    https://imo.im/register
    Where did you download it from ?
    If it was not the Appe Store what is the setting in System Preferences > Security about downloads from other sites ?
    8:29 pm      Sunday; April 12, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Mainstage Was unable to complete the download world music loops

    Ok, so I have bought Mainstage 2.2 from the app Store, and have almost downloaded all the additional content.
    However, the only pack that will not complete it the World Music Apple Loops.
    I immediately get the message, Mainstage was unable to complete the download.
    There is no attempt to download this pack. 
    Any suggestions?  I don't really want to uninstall and download 20Gb again.
    Cheers

    More disk space than I can shake a stick at, very stable internet connection, speedtest shows ping <18ms etc.  The main reason for purchasing mainstage is for the loops and instruments, at £20 that's a bargain, but only if I can get the application to download the last package.
    Wireshark shows that the server is rejecting the request from MainStage as a HTTP/1.1 416 Requested Range Not Satisfiable.
    Looks like either a MainStage Application issue requesting the HTTP GET command or the Server not servicing that request.
    Apple over to you!

  • Unable to COMPLETE install of iPhoto 09 on Power PC G4 - specs OK

    I have a very old PowerPc G4 (512RAM), 1,25Ghz, OS X 10.5.8 which my kids use for their photos.
    I am unable to complete the install of iPhoto 09 from the iLife 09 update disc I purchased in the late 2000's.
    The disc works perfectly and I get as far as slecting the drive on which I want to install iPhoto. I hit the install button and the beachball appears for 5 seconds or so, then diappears and the install stops. I can hit install again and the process repeats itself but it is not updating the program.
    The reason for doing this is to transfer a my iPhoto 09 library over to this machine instead of re-importing the photos and having to recreate the albums / events.
    iLife 08 is installed and working.
    Thanks in advance for any help.

    Try using   Pacifist to install iPhoto and it's supporting files from the iLife 09 disk.  I would move your current iPhoto application to the Desktop until you know the install was successful and it operates as expected.
    OT

  • To "update software" and when I restarted my computer I got the message unable to complete. Now when I restart my computer it is shows the apple and a continuously turning time gear.

    I responded to install new software message and was asked to restart--I did that--went to lunch and when I returned my screen showed the  message that said, "unable to complete update for unknown reason" or something to that regard-and asked me to restart.  I tried to restart and now see the apple but the time scroll is in an unending loop and my computer will not boot.-I recently installed snow leopard in order to be able to sync my mobile me accounts--since then my computer runs hot.  Not sure if that has anything to do with current issue.

    You will need to reinstall Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the appropriate Combo Updater to return to the Snow Leopard version you prefer from support.apple.com/downloads/.

  • We are sorry, but we are unable to complete your request.•The Office 2007 Product Key provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.

    Over the years I have had many ISP and email addresses - but now we have  finally gone almost fully virtual...
    I have a live login and MS ID 4 my SkyDrive account but I only use my MS  touch with 8.1, SkyDrive and office 365 for mobility.
    And I still like to backup to my own server!!!
    What would be good is if I can put all the software licenses and product  keys of the software and keep a record of my mac addresses for  hardware  and even static IP's in a file or a secure location within the MS online  store.
    That's where MS wants me to get my computing needs from in future and I  will always be able to retrieve it in future but what about the $$$$$ I have  spent on software, hardware and applications prior to now???
    I know u guys love 2 collect data 4 marketing analysis,
    4 example I have an old PC that is still running a server from last century  - if you knew about it a simple script would allow you to offer upgrades or at  least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out 
    now...
    Why cant I add products previous online email purchases into the 1 MS live  ID account where I can keep it together? If you make that available I don't have  to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc 
    etc.
    What has brought me 2 this is I was looking for my office pro 2007 disks to  rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit  at all)
    I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO  DOWNLOAD the software - regardless of the key I used - I got the error message:  We are sorry, but we are unable to complete your request.•The Office 2007  Product Key
    provided is already associated with another user on this site.  Please log in with the user information originally used with this Office 2007  Product Key.
    That's crap - This is a clean brand spanker install of Win7 and there was  nothing b4 I put the oem drivers from Toshiba back on.
    I looked at dozens of support pages and forum blogs and tried for hours to  get a copy to download - including incognito and other logins but because my  default PC name is also my MS Windows live ID the same error was repeated.
    I keep away from the non MS sites for these things and with good reason -  there were heaps of similar users with the same issue or very close to it that  had downloaded from a supposed MS copy from eValue or digital river etc and the  next
    thing was total corruption of the OS.
    EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave  me a link to a slightly older version which will need updating and some reg edit  changes but so far, so good.
    The point is - what a crock !
    I should be able to just keep all my software, drivers, updates, service  packs, and versions that I have upgraded in the MS store.
    If Microsoft aren't going to support XP or Office 2003 and eventually 2007,  vista & Windows7 not far behind??? then that's still no excuse for them to  put these restrictions and limits when I OWN my copy of the software!!
    Unlike office 365 and SkyDrive space which is described in the T&C  (that we all read before ticking that radial button to agree of course) as ONLY  under a leased licence.
    IF Microsoft can support AND develop software that supports SQL2000  Servers, why is it so hard to archive and keep the same info for  everyone???

    Over the years I have had many ISP and email addresses - but now we have  finally gone almost fully virtual...
    I have a live login and MS ID 4 my SkyDrive account but I only use my MS  touch with 8.1, SkyDrive and office 365 for mobility.
    And I still like to backup to my own server!!!
    What would be good is if I can put all the software licenses and product  keys of the software and keep a record of my mac addresses for  hardware  and even static IP's in a file or a secure location within the MS online  store.
    That's where MS wants me to get my computing needs from in future and I  will always be able to retrieve it in future but what about the $$$$$ I have  spent on software, hardware and applications prior to now???
    I know u guys love 2 collect data 4 marketing analysis,
    4 example I have an old PC that is still running a server from last century  - if you knew about it a simple script would allow you to offer upgrades or at  least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out 
    now...
    Why cant I add products previous online email purchases into the 1 MS live  ID account where I can keep it together? If you make that available I don't have  to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc 
    etc.
    What has brought me 2 this is I was looking for my office pro 2007 disks to  rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit  at all)
    I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO  DOWNLOAD the software - regardless of the key I used - I got the error message:  We are sorry, but we are unable to complete your request.•The Office 2007  Product Key
    provided is already associated with another user on this site.  Please log in with the user information originally used with this Office 2007  Product Key.
    That's crap - This is a clean brand spanker install of Win7 and there was  nothing b4 I put the oem drivers from Toshiba back on.
    I looked at dozens of support pages and forum blogs and tried for hours to  get a copy to download - including incognito and other logins but because my  default PC name is also my MS Windows live ID the same error was repeated.
    I keep away from the non MS sites for these things and with good reason -  there were heaps of similar users with the same issue or very close to it that  had downloaded from a supposed MS copy from eValue or digital river etc and the  next
    thing was total corruption of the OS.
    EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave  me a link to a slightly older version which will need updating and some reg edit  changes but so far, so good.
    The point is - what a crock !
    I should be able to just keep all my software, drivers, updates, service  packs, and versions that I have upgraded in the MS store.
    If Microsoft aren't going to support XP or Office 2003 and eventually 2007,  vista & Windows7 not far behind??? then that's still no excuse for them to  put these restrictions and limits when I OWN my copy of the software!!
    Unlike office 365 and SkyDrive space which is described in the T&C  (that we all read before ticking that radial button to agree of course) as ONLY  under a leased licence.
    IF Microsoft can support AND develop software that supports SQL2000  Servers, why is it so hard to archive and keep the same info for  everyone???

Maybe you are looking for