Nnot Get Session Key for Authentication

I found in trace file of my application
(TRACE_LEVEL_CLIENT = SUPPORT in sqlnet.ora):
ORA-28035 Cannot Get Session Key for Authentication
Cause: Client and server cannot negotiate shared secret during logon.
What is the session key and how to obtain it?

DISABLE_OOB = ON
NAMES.DEFAULT_DOMAIN = domain
NAMES.DIRECTORY_PATH= (TNSNAMES)
SQLNET.CRYPTO_SEED = P9EBHPQFLEIAJNUFAZHQP8JBNES8EBEEHS895LCWW9UZKO9HR2R2E5GDN7JV15T27QJO97D89BQAWSRF
# SQLNET.CRYPTO_CHECKSUM_SERVER = requested
# SQLNET.CRYPTO_CHECKSUM_CLIENT = requested
# SQLNET.ENCRYPTION_SERVER = requested
# SQLNET.ENCRYPTION_CLIENT = requested
SQLNET.RADIUS_AUTHENTICATION = ad1.domain
# SQLNET.RADIUS_AUTHENTICATION_PORT = (PORT)
SQLNET.RADIUS_AUTHENTICATION_TIMEOUT = 5
SQLNET.RADIUS_AUTHENTICATION_RETRIES = 3
SQLNET.RADIUS_ALTERNATE = ad2.nlmk
# SQLNET.RADIUS_ALTERNATE_PORT = (1645)
SQLNET.RADIUS_ALTERNATE_TIMEOUT = 5
SQLNET.RADIUS_ALTERNATE_RETRIES = 3
SQLNET.RADIUS_SEND_ACCOUNTING = ON
# SQLNET.RADIUS_SECRET=(path/radius.key)
SQLNET.AUTHENTICATION_SERVICES = (NTS, BEQ,RADIUS)
# TRACE_LEVEL_CLIENT = SUPPORT
# TRACE_LEVEL_SERVER = SUPPORT
domain is the name of my windows domain
TNSNAMES.ORA
SERVER.DOMAIN =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = server.domain)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = server.domain)
)

Similar Messages

How to get the "Key" for Dimension in SSAS.

Hi
How to get the "Key" for Dimension in SSAS.
(Below value is the PPSParameters table XML column value in PPSDatabase in SharePoint.
Below three key values are belongs to "Dimension". I have tried to find the key but I could net get it.)
<NewDataSet>
<UserValues><Key>16A201A9E75128559F947D58E6D187A9</Key></UserValues>
<UserValues><Key>7FBEA449A6ED5606973306445839619E</Key></UserValues>
<UserValues><Key>A8F75F9720817BCD2E1DFC1C1CF1E678</Key></UserValues>
</NewDataSet>
Thanks & Regards
Poomani Sankaran

To Be Honest there is not one straight Cmdlet that atleast I have come across
The best way would if you have Lync monitoring server
Using the Lync Server 2013 Monitoring Server
If you have the Monitoring Server role configured in your environment, and for Lync Server 2013 everyone should!, you can use information contained in the LcsCDR database to pull back the last time a user signed in. You can run the following query* to
pull back the user's SIP URI and their last login time:
USE LcsCDR
SELECT dbo.Users.UserUri, dbo.UserStatistics.LastLogInTime
FROM dbo.UserStatistics
JOIN dbo.Users ON dbo.Users.UserId = dbo.UserStatistics.UserId
ORDER BY UserUri
Which produces the following output:
The advantage to using the Monitoring Server to obtain this data is that unlike the information contained in the rtcdyn database, the information from the LcsCDR data will persist even when the user isn't signed into Lync.
To get approx count of users enable for Lync Server in your organisation
Get-CsUser -Filter {Enabled -eq $true} | MeasurE
Please not the above command let will give you an approx number not exact
From the Monitoring report yet the SIP account that signed in and then from count find out how many user havent signed in this is manual task
Hope this is helpful
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

Why can't I get a key for the Office Consumer Technical Preview now?

So.. I tried for many times to get a key for my new office 16 technical preview but failed all the times. Now the office on my PC is running out of time. So I cannot use it now. How could I get a key to let it work?

Hi CNysl,
This forum is for developers discusing devloping issues about
apps for Office.
As suggested by jackafx, I also suggest that you contact the Office team via the blog, you can send an email by following link like figure below:
The next chapter of Office on Windows
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I get license key for trial app, now that I have joined Creative Cloud ?

how do I get license key for trial app, now that I have joined Creative Cloud ?

after trying again, the signin process worked and activated my trial copy for me.

How to get master key for strong composition detail

Hi all,
My Offline Database Diagram that I have drawn with JDeveloper uses the cascading delete option in foreign keys. When the master will be deleted, its details should be deleted as well. This has resulted in strong composition relationships between master and details.
These relationships are covered by ADF BC Entity Associations and View Links.
But what strikes me is that both AppModule tester and the JHeadstart first-cut application are not able to insert a new detail? They respond with:
JBO-25030: Failed to find or invalidate owning entity
I found an article of Steve Muench discussing this topic with a bare BC4J Java sample. How do I get this in my master/details Entity Impl's context? How can I get the key of the selected master in the create() method of the detail (Steve Muench selects the first row in the table)?
I can't get rid of the strong association relationship in the Entity Association. It is automatically switched on when I switched it off.
Anyone to help?
thanks in advance,
Martijn Peters

Hi Markus,
Thanks for your reply. Your hints describe how to manually set up a master-detail relationship at the View Objects level.
Does this also work for master-detail entity objects that have a strong composition through CASCADE DELETE on the foreign keys in the database?
What surprises me is that the BC4J wizard uses different approaches for creating a master with details with or without CASCADE DELETE.
I would not expect different behavior for the create() operation in BC4J. I would only expect different behavior for remove() operations.
Moreover it is strange that the generated View Objects can not be altered and that we depend on a workaround you described.
Is their no risk for BC4J corruption when the master is deleted with the BC4J tester and that the database CASCADE deletes the details?
JDeveloper 10.1.2 provides a pretty tool for designing and maintaining a database schema though an Offline Database Diagram.
It shows the CASCADE DELETE option on foreign keys as a strong composition in an object oriented fashion.
The ADF BC wizard is very powerful in making an object oriented abstraction of the database schema.
However it seems to me that ADF BC does not seamlessly fit regarding compositions.
Switching on CASCADE DELETE in the database causes master-details pages in JHeadstart to disfunction.
Need this be improved in BC4J or am I wrong in the implied concepts?
What Java code can I add in the create() methods of my Entity Object subclasses to get the same behavior of regular master-detail objects creation?
Martijn Peters

Getting License Key for NSP (no E-Mail is sent)

Hello SDN Team,
as reported I have successfully installed the NW04 ABAP Sneak Preview. Now I'm trying to get a license for it at http://www.sap.com/solutions/netweaver/minisap.epx. I enter all the data, check the License Agreement, hardware key from Transaction SLICENSE, choose the System NSP and send the form. But I never got an E-Mail with the key. So I tried the System WA1 just for a test. And after just a Minute I've got the E-Mail with the key.
Regards
Gregor

lol.
@gregor,
i don't know what kind of groopie you are and why you are so opportunistic to talk for everyone.
fact is:
- some (including me) haven't even got that email.
OS: "Did you request it again - after I fixed the EmailServer?"
- others seem to have got it, but with a developer key for installation number DEMOSYSTEM whereas the installation sets the installation number to INITIAL.
the developer key for INITIAL is definitely different from the one for DEMOSYSTEM.
so to be a little constructive, at least tell people that they probably have to actualize their general license to update the installation from INITIAL to DEMOSYSTEM and afterwards use the known developer key to unlock the repository.
and don't you tell me what to post an what not to post.
anton
Message was edited by: Oliver Stiefbold

Get product key for preinstalled windows 7

Hello sir, I bought this laptop (Hp pavilion dv6 6115tx Entertainment Notebook)around 4 years ago with preinstalled Windows 7 Home Premium Operating system. As you know Microsoft is going to give free upgrade to Windows 10. But the problem is that the product key below my laptop is not much visible. I am unable to identify the product key. Is there any other way to get product key of my genuine windows 7? I have recovery disk with me. but it does'nt have product key on it.Please help me... Thanks & Regards,Rushikesh Musale

Yes, you can use the same product key for 64-bit release too, as SenneVL says. But, kindly note that upgrade across is not supported and you need to perform clean install only. Also, kindly note that the Windows installation must be made in the same PC,
even if different architecture is being used. Otherwise, activation issues will arise.
Multiple architecture is supported in multiboot, so Windows 32-bit and 64-bit can be installed as multiboot environment, parallely.
Balaji Kundalam

Getting Candidate Keys for a Table?

Hi,
Does anyone know a way of getting a list of all candidate keys for a table? (all "UNIQUE" sets of columns defined when creating a table).
I looked in DatabaseMetaData, but there you can only get a list of primary key fields.
I'm using Java 1.3.1 with a PostgreSQL backend.
Cheers
Amar

run a query against the Meta-data tables of the database for getting the UNIQUE columns.

Can I get product key for older versions of Illustrator with Creative Cloud Student and Teacher edition

I have purchased the Creative Cloud Student and Teacher edition and I now need to install illustrator on Windows Vista. All the new versions are not available for Vista. I have managed to find older versions for download but it is asking me for a product key. Is it possible to get the product keys for older version with Creative Cloud Student and Teacher edition?

You cannot purchase older versions of Adobe software thru Adobe. If you have a full subscription you can acquire the CS6 version thru that. I have had CS6 running on a Vista system for years without problems.
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

Unable to get registry key for protectlink in cisco rvs4000

All,
I need help. Just a few weeks ago I purchased a rvs4000 router. On that small business device is a product called protectlink. To get an activation key, you need a registration key first. That is normal in the package. However, my wify like to cleanup up and throws stuff away that she should not do. So, I lost the registration key.
It is impossible to key a new registration key. The webstore does not have them. They are in the package and will not open an other one. Cisco (if you can get passed the ...you don't have a support contract...go away statement) does not even know that they have this product. Registration keys, never heard of it. But you get the normal ... we can't help you, go to the webstore or trendmicro.... And that after the statement, we don't know that product. How do you know that this is a trenmicro piece of software.....
Well call trendmicro.... Same answer, we can't help you. Go to Cisco or the Websore. I realy feel like a dog trying to get his tail.
So, last hope of some progress I post this on the community group for small business devices. Maybe this will help. If some one can help me getting a registration key for a cisco small business router rvs4000 to obtain an activation code for the cisco/trensmicro protectlink product.... then please send it [email protected]
Kind regard, Rembrandt

I want to inform you that the rvs4000 router does not come with the protectlink license. Protectlink is a service that you can purchase from a resseller or you can also get the trial license from the cisco website to test it our before you buy it for free. I am going to provide you with the link for the trial: http://www.cisco.com/cisco/web/solutions/small_business/products/security/protectlink/index.html
The second link is to find a trend micro reseller: http://www.trendmicro.com/buy/partners/Small-Biz.asp
Thanks
Q

Getting Licece Key for BO XI 3.1 Integration tool kir for SAP Solutions

Hi ,
I want to Install 'BO XI 3.1 SP3 Integration Toolkit for SAP solutions'.I have market place login ID.
1)Can you please tell the ways to get permanent licence key for above mentioned tool?
Edited by: Venkat8130 on May 20, 2011 1:34 PM

Check with your SAP/BO account manager to see if you are licenced for it.
If you are, they will be able to supply it to you.

Where I could get Registration Key for ProtectLink ?

Register Your Product
Please enter your Registration Key (for example xx-xxxx-xxxxxx-xxxxxx) below and                                                                  click Next
Contact your reseller if you cannot locate your Registration Key.
If you are a current ProtectLink Gateway user, and have purchased another                                                                  router,
Click here
to register                                                                  the new router.
For further assistance, contact www.cisco.com/support

www.cisco.com/go/protectlink
in the middle of the page it mentions the 30day trial.
1year and 3year licenses can be bought from your local Cisco Sb distributor.
or from any Online Retailer
http://www.amazon.com/Cisco-L-PLEP-25-3YR-Protectlink-Incremental-LPLEP253YR/dp/B0046SKRSW/ref=sr_1_15?ie=UTF8&qid=1295006936&sr=8-15
(if it wouldn't show 'currently unavaible)
Hope it helps
Jo

How get license key for ESR integration ARIS

Hi experts.
I have ARIS and ESR. A have valid license key for CE.
Where i can got license key for ESR integration extension.
Max

after trying again, the signin process worked and activated my trial copy for me.

Where to get license key for SAP Netweaver ABAP 7.01 trail version?

Hi All,
I installed SAP Netweaver ABAP 7.01 trail version on my PC but I don't know where to get the license key and how to install it. Please guide me.

Hi
Refer the following link for installation of license key.
https://cw.sdn.sap.com/cw/docs/DOC-111105
/people/mario.herger/blog/2010/01/20/new-community-developer-license-is-available
Regards
Vinodh

How to get the keys for a field in the dropdown list?

The dropdown list of payment terms on an account is unfortunately very big, containing al lot of different values, in our system and therefore very confusing for the user working with Web UI version 5.2 to pick the right one. The keys (code like e.i Z077 or ZO23) are not stated in the list available for user. Is there any way in the system to flag if the different fields should show boths the keys(codes) and the description of the values in the field as Payment terms, etc.
In the ERP SAP Gui it is possible to activate if you want the keys should be shown in all drop down list.
If this is not possible for all the fields at one time, what can be a solution to have the keys in the drop down lists, any suggestion will be very valuable for us.
Kindly regards
Camilla

HI Joost
No it is not that simple, that is not a solution for us. The fields are maintained i our backend system and replicated to CRM, and these fields descriptions are also printed at Order confirmations and invoices, and we do not want the keys that do not give any meaning to be visible to customers.
BR
Camilla

Nnot Get Session Key for Authentication

Similar Messages

Maybe you are looking for