NO 11g "Manage Filters" Online Layout "OR" filter operator!?
Hey guys,
I realize this is a totally n00b question about the BIP 11.1.1.5 Online Layout editor (for Interactive layout mode). I've created a complex P&L financial statement report in BIP using a Word RTF template, and I'd like to try to retool it into the online layout editor for possibly easier maintainability.
But I'm coming up against what looks like a fundamental limitation and problem to me in the online layout editor. I'd like to create either a Repeating Section object or a Data Table object that will display values if a few certain values are found in the data. So, I want my filter to do something like this (to display the section or table):
If Group = 'ABC'
If Group = 'XYZ'
Problem is, in my "Manage Filters" window, I need to be able to supply an "OR" filter operator between those two lines! It's an implicit "AND" operator between them apparently.
I would gladly use an "IN" operator instead of "=" if it existed, but alas, I don't see that option either in my Manage Filters controls.
Has anyone else come up against this in the 11g online layout editor for interactive mode output? Am I missing something totally obvious here that's right under my nose and I just can't seem to see it or find it?
Thanks,
Jeremy
Hi BIPuser,
Thanks so much for the reply; sorry for the delay in getting back to you. I believe you are referring to the group filter functionality on the data model itself, correct? If so, that's a good thought and maybe I can use that approach, but it means I would have to potentially break up my "master" data set into many, many copies to get this "OR" like functionality.
For example, suppose I had 26 groups, groups A-Z that I wanted to show together in different report sections in my final layout. So I want A&B, C&D, E&F, etc. Instead of having one master data set with report-level grouping that way, I guess I'd have to break my data model into 13 different data sets, each one group filtered for A&B, C&D, E&F, etc, right?
That approach seems to involve a lot more setup and data set maintenance, when all I really want is just an "OR" ability in the report layout designer itself. Something exactly like OBIEE provides in the filter section in the Criteria tab of a BI Analysis (when developing a query there).
Now that I say that, maybe I can extend my OBIEE BI Analysis (I'm using that as the basis for my source), and perhaps I could create a new A&B, C&D, etc grouping column there to "bucket" my data together into a single data group to work around the online layout limitation of not having an "OR" filter operator available. Or, like you mentioned, I could even use the "Add Element by Expression" option in the data model itself if I wanted to manage it from there instead of OBIEE.
I still say it would be easier if they would just give us a filter "OR" ability in the "Manage Filters" dialog in the layout editor. :)
Thanks again BIPuser!
Jeremy
Similar Messages
-
Add a new font in the online Layout editor in BI Publisher (OBEE 11g)
Hi ,
Possible to add a new font in the online Layout editor (Font list) in BI Publisher (OBEE 11g).
Thanks,In the layout editor, you can simply drag the fields so they don't overlap.
See http://www.youtube.com/watch?v=7emNa7THMLg
Sandeep Gandhi -
Hello,
Issue:
On a Virtual Machine with a secondary VHDX attached, I cannot manage (bring online, initialize, partition, format, or write to) the VHDX hard drive once it has "Enable Virtual Hard Disk Sharing (VHD Sharing)" enabled.
Questions:
Should I be able to manage (bring online, initialize, partition, format, and write to) a VHDX hard drive once it has VHD Sharing enabled? If I should be able to manage it, what am I missing?
Topography:
One SuperMicro Cluster In a Box (CIB) with 2012 R2 Data Center on each node. Microsoft Failover Cluster installed and working on each node. The Failover Cluster Servers on each host passes all cluster validation tests. Two Hyper-V 2012 R2 Data Center Virtual
Machine (VM) servers, one on each node. 1 common Cluster Shared Volume (CSV) and 1 Generation 2 Scale-Out File Server (SOFS) shared volume both Resilient File System (REFS) formatted. One 5 Gigabit (Gb) Virtual Hard Drive Type X (VHDX) file on the CSV and/or
SOFS. Integrity bit and read only turned off on VHDX file.
Each of the two Hyper-V VMs have one 127Gb VHDX Generation 2 primary hard drive and 1 VHDX secondary hard drive attached, both on SCSI Controller #1.
Background:
If I start VM1 without the VHD Sharing enabled on the secondary hard drive, I can bring the drive online, initialize, partition, format, and write to the drive.
If I enable VHD Sharing, I can no longer modify the drive in Disk Management in any way. With or without VM2 running.
Both VMs and the CSV and SOFS are on the same host cluster server, or not, no difference…
The VHDX is referenced either by the CSV name C:\ClusterStorage\Volume1\TEST1.VHDX
or a Shared Folder name
\\sharedfolder\folder\Test1.VHDX .
If I start VM1 with VHD Sharing disabled and I format the drive, then shut down and enable VHD Sharing, the drive is offline and requests initialization which fails with an "I/O device error", every other attempt to manage the drive fails with
the same "I/O device error", error.
Events:
VDS fails to write boot code on a disk during clean operation. Error code: 8007045D@02070008
Log Name: System
Source: Virtual Disk Service
Date: 3/3/2015 11:39:18 AM
Event ID: 10
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Server1.Domain.local
Description:
VDS fails to write boot code on a disk during clean operation. Error code: 8007045D@02070008
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Virtual Disk Service" />
<EventID Qualifiers="49664">10</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-03T19:39:18.000000000Z" />
<EventRecordID>27318</EventRecordID>
<Channel>System</Channel>
<Computer> Server1.Domain.local </Computer>
<Security />
</System>
<EventData>
<Data>8007045D@02070008</Data>
</EventData>
</Event>
AND
Log Name: System
Source: disk
Date: 3/3/2015 12:16:42 PM
Event ID: 153
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: Server1.Domain.local
Description:
The IO operation at logical block address 0x0 for Disk 1 (PDO name: \Device\MPIODisk1) was retried.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="disk" />
<EventID Qualifiers="32772">153</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-03T20:16:42.017090000Z" />
<EventRecordID>27333</EventRecordID>
<Channel>System</Channel>
<Computer>Server1.Domain.local</Computer>
<Security />
</System>
<EventData>
<Data>\Device\Harddisk1\DR1</Data>
<Data>0x0</Data>
<Data>1</Data>
<Data>\Device\MPIODisk1</Data>
<Binary>0F01040004002C00000000009900048000000000000000000000000000000000000000000000000000020488</Binary>
</EventData>
</Event>
Thanks again for any help,
RobertHi All,
I had to buy a Willy Wonka bar and spend a golden ticket to get an answer to this one.
We found that the default LogicalSectorSizeBytes of a VHDX is 512b. It needs to be 4kb.
The Host drive doesn't seem to matter CSV or SOFS. Below is a way to create a VHDX with the correct LogicalSectorSizeBytes.
In Power Shell, type --> New-VHD -Path C:\ClusterStorage\Volume4\Cluster2DataDisks\Cluster2Disk1.vhdx -SizeBytes 200Gb -PhysicalSectorSizeBytes 4kb -LogicalSectorSizeBytes 4kb
Attach the resulting file to your guest cluster servers and set the Enable Virtual Hard Disk Sharing option on both server. You should now be able to bring the drives on-line and initialize them. They will also add to the guest cluster pool.
Change the size, path and file name above to fit your Cluster Servers configuration.
Thank You
Sachin Kumar Support Engineer | Windows Server Setup Team | Microsoft Enterprise Platform for finding the answer to this one.
Hope this helps others.
Robert -
Which is better approach to manage sharepoint online - PowerShell Script with CSOM or Console Application with CSOM?
change in sharepoint scripts not require compilation but anything else?Yes, PowerShell is great, since you can quick change your code without compilation.
SP admin can write ps scripts without specific tools like Visual Studio.
With powershell you can use cmdlets,
which could remove a lot of code, for example restarting a service.
[custom.development] -
Accessing Managed Session Bean in Servlet Filter
I wrote a Servlet Filter to handle user authentication. Now I'm trying to access my Managed Session Bean in the filter in order to save the current user. Unfortunately the Session Bean is created after the Filter executes for the first time.
I'm trying to access the Session Bean in this way:
(SessionBean) FacesContext.getCurrentInstance().getExternalContext().getSessionMap().get("sessionBean");
In this case getExternalContext() is equals null.
Is there any way to create the Session bean before the filter executes or any other ideas how to handle this?
I already searched around the internet but couldnt figure out something.
Thanks guys,
PaulOk, fixed it like this. Works perfect. JSF finds and uses the handmade Session Bean as well.
if(request.getSession().getAttribute(BeanNames.SESSION_SCOPE_BEAN) == null) {
SessionBean sessionBean = new SessionBean();
request.getSession().setAttribute(BeanNames.SESSION_SCOPE_BEAN, sessionBean);
}Thanks,
Paul -
Does pages have an equivalent for Word's option of viewing a document in "online layout"?
Does pages have an equivalent for Word's option of viewing a document in "online layout"?
With online layout you can have the page of your document fill up as much of the screen as you want while being able to zoom the viewing of your text or words to any percentage you want. In pages, I can zoom or stretch the document to fit the full width of the screen, but the view the actual text or words themselves correspondingly enlarges as well.
-
I would like to build a desktop computer for video editing, business management and online learning and also have a small laptop, tablet or ipad to take to university, Can someone please advise me of the best set up for this?
Let's see if I understand this... You're asking for advice on building a desktop computer, in the Apple developer's forum? Why not just buy a Mac?
-
Manage Telstra Online Security account
Log into MyBigPond, using your BigPond email address and password if you want to do the following:
If you want Telstra Online Security to protect more than one computer click on an Orange Install button.
If all your licenses are in use, you can hover over the green button to get more information about the install.
If you wish to protect another different computer but all the licences are green, press a green button to reset and install on this computer
If you need to change your payment details, change from paying monthly to paying one year in advance, change how you pay your subscription fee, switch from Credit Card to Telstra Bill or correct your Credit Cards details if they have changed
If you want to upgrade from BigPond SafeCentral to BigPond Security.
If you want to cancel your service, use the unsubscribe button to unsubscribe from BigPond Security.Re: Manage Telstra Online Security account
I want to know if Telstra online security is active on my account or any other active antivirus software. It tells me it DOES but I often receive pop-ups that tell me it's expired or inactive. I never click on the pop-ups for fear they are actually malware.
I want to know if my computer has any malware that may effect it.
I tried to access your free malware scan but couldn't find anywhere to activate it - just information about it.
0423764776
[email protected] -
Monitoring progress when performing filter operations on images
Hi,
I am working on Java2D and making some image filters using classes like ImageFilter etc. Now For simple filters I want to get the progress status while the filteting is in progress, so that I can show a progress bar in the GUI.
For this I do not have much idea. I think we can use the ImageConsumer interface, so that if the class implementing that interface list itself as an image consumer with the filter operation. Here is two way I have tried implanting this:
1st way:
Class MyConsumer implements ImageConsumer
int width,height;
int percentProgress;
Public image processImage(Image srcImage, ImageFilter filter){
FilteredImageSource fis: new FilteredImageSource(srcImage.getSource(),filter());
//should we do this?
fis.addConsumer(this);
//or this?
srcimage.addConsumer(this)
Image destImage = this.createImage(fis);
return destImage;
//implementing methods of imageConsumer
//we get the width and height of the new destImage (or do we get the dimension of the srcImage here??)
public void setDimensions(int width, int height){
this.width=width;
this.height=height;
public void setPixels(int x, int y, int w, int h, ColorModel model, int[] pixels, int off, int scansize){
// Is this the correct way of obtaining the progress????
progressPercent=(y*100)/height;
//We also have empty implementation of other ImageConsumer methods after this
--------------------------------------------------------------2nd way, let?s say we use a smooth filter and replace the processImage(..) method above with the one below (the other methods being same):
Public image processImage(Image srcImage){
float[] SHARPEN3x3 = { 0.f, -1.f, 0.f,
-1.f, 5.0f, -1.f,
0.f, -1.f, 0.f};
BufferedImage dstbimg = new
BufferedImage(iw,ih,BufferedImage.TYPE_INT_RGB);
Kernel kernel = new Kernel(3,3,SHARPEN3x3);
ConvolveOp cop = new ConvolveOp(kernel,
ConvolveOp.EDGE_NO_OP,
null);
//should we do this?
dst.addConsumer(this);
//or this?
srcImage.addConsumer(this);
cop.filter(srcImage,destImage);
return destImage;
}Now I do get a progressPercent. But when the percent is 100%, the destimage does not return, that means the operation is not yet complete.
So is this the correctw ay, or is there any other way to know the progress of the flter operation.
Also I extended the ImageFilter class and overrode its setPixel method as:
public void setPixels(int x, int y, int w, int h, ColorModel model, int[] pixels, int off, int scansize){
int progressPercent=(y*100)/height;
System.out.println("progress in image filter:"+progressPercent);
//I simply print out the progress and let the super perform the filter operation
super.setPixels(x, y,w, h, model, pixels, off, scansize);
//should I do this below? This calls the imageconsumer's setpixels
//that I implement in the MyConsumer class
consumer. setPixels(x, y,w, h, model, pixels, off, scansize);
}I observe that the setPixel method of MyImageFilter is called several times even for the same scan lines, and even after percentProgress is 100%, the process runs again for 2-4 times. So the filtering operation scans the lines several times to finally perform the filtering, and as such the percentProgress is incorrect.
Can anybody guide me. Is this approach okay and needs to be modified a bit, or there is a different approach to obtain the progress from a filter operation?
I would finally want the same progress from other operations like LookupOp, ConvolveOp, AffineTransformOp, ColorConvertOp, RescaleOp.
Thanks in advance
Tanveer
DrLaszloJamf, are you there? I am sure you are one of them who can help me in this.
anyone can send me a private message too at [email protected]Please somebody let me know how to get the progress of imagefilter operation using convolveOp.filter(...) or Filteredimagesource. I waant to display the progress i a JProgressbar.
-
Reg:filter operator in is not like
hi,
can anyone tell how does the filter operator "is not like pattern" function in obiee answers?in what scenarios this operator might be used/
thanksHi,
Filter:
Its used to filter data from report.We apply filter on report as prompted to make prompt effective.
Example :
ColumnA is prompt then we apply filter is not like ('India','Singapore') then the report will display expect india and singapore country in the output the report as ColumnA is prompted
Filters can be apllied on report in many with diff operators like not equal In order to select values dynamicaly from report and filter data from report we use prompt.
Prompt - Its used to select specific values to be filtered from the report
Thanks
Deva -
Rewrite sql to avoid filter operation
Hi All,
I found below sql and some more sql's causing high CPU usage.
SELECT :B1 AS ID ,
DECODE((SELECT 1
FROM DUAL
WHERE EXISTS (SELECT NULL
FROM ONS
WHERE PARENT_ID = :B1 )), 1, 1, 0) AS IP_RELATION ,
DECODE((SELECT 1
FROM DUAL
WHERE EXISTS (SELECT NULL
FROM ONS
WHERE ULTIMATE_PARENT_GID = :B1 )), 1, 1, 0) AS UP_RELATION ,
DECODE((SELECT 1
FROM DUAL
WHERE EXISTS (SELECT NULL FROM AFFILIATIONS WHERE AFFILIATED_ID= :B1 )), 1, 1, 0) AS AFF_RELATION ,
DECODE((SELECT 1
FROM DUAL
WHERE EXISTS (SELECT NULL FROM JOINT_VENTURES WHERE JOINT_VENTURE_ID= :B1 )), 1, 1, 0) AS JV_RELATION ,
DECODE((SELECT 1
FROM DUAL
WHERE EXISTS (SELECT NULL FROM SUCCESSORS WHERE SUCCESSOR_ID= :B1 )), 1, 1, 0) AS SUC_RELATION ,
DECODE((SELECT 1
FROM DUAL
WHERE EXISTS (SELECT NULL FROM COUNTERPARTY WHERE CP_TAX_AUTHORITY_ID = :B1 )), 1, 1, 0) AS TAX_AUTH_RELATION ,
DECODE((SELECT 1
FROM DUAL
WHERE EXISTS (SELECT NULL FROM COUNTERPARTY WHERE CP_PRIM_REGULATOR_ID = :B1 )), 1, 1, 0) AS PRIM_REG_RELATION ,
DECODE((SELECT 1
FROM DUAL
WHERE EXISTS (SELECT NULL FROM ONS WHERE DUPLICATE_OF_ID = :B1 )), 1, 1, 0) AS DUP_RELATION ,
DECODE((SELECT 1
FROM DUAL
WHERE EXISTS (SELECT NULL FROM ONS WHERE REG_AUTHORITY_ID = :B1 )), 1, 1, 0) AS REG_AUTH_RELATION
FROM DUAL
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | 2 (100)| |
|* 1 | FILTER | | | | | |
| 2 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 |
|* 3 | INDEX RANGE SCAN | IDX_IMMEDIATE_PARENT_ID | 1 | 3 | 2 (0)| 00:00:01 |
|* 4 | FILTER | | | | | |
| 5 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 |
|* 6 | INDEX RANGE SCAN | IDX_ULTIMATE_PARENT_ID | 2 | 4 | 2 (0)| 00:00:01 |
|* 7 | FILTER | | | | | |
| 8 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 |
|* 9 | INDEX FAST FULL SCAN| PK_ORG_AFFILIATED_WITH | 1 | 7 | 294 (7)| 00:00:04 |
|* 10 | FILTER | | | | | |
| 11 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 |
|* 12 | INDEX FULL SCAN | PK_ORG_JOINT_VENTURE_OF | 1 | 7 | 3 (0)| 00:00:01 |
|* 13 | FILTER | | | | | |
| 14 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 |
|* 15 | INDEX FAST FULL SCAN| PK_ONS_SUCCEEDED_BY | 1 | 7 | 79 (7)| 00:00:01 |
|* 16 | FILTER | | | | | |
| 17 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | IDX_ORG_CP_TAX_AUTHORITY_ID | 2 | 14 | 2 (0)| 00:00:01 |
|* 19 | FILTER | | | | | |
| 20 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 |
|* 21 | INDEX RANGE SCAN | IDX_ORGCP_PRIM_REGULATOR_ID | 1 | 4 | 2 (0)| 00:00:01 |
|* 22 | FILTER | | | | | |
| 23 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 |
|* 24 | TABLE ACCESS FULL | ONS | 1 | 2 | 27013 (4)| 00:05:25 |
|* 25 | FILTER | | | | | |
| 26 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 |
|* 27 | TABLE ACCESS FULL | ONS | 1 | 2 | 475 (3)| 00:00:06 |
| 28 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 |
Peeked Binds (identified by position):
2 - :B1 (NUMBER, Primary=1)
3 - :B1 (NUMBER, Primary=1)
4 - :B1 (NUMBER, Primary=1)
5 - :B1 (NUMBER, Primary=1)
6 - :B1 (NUMBER, Primary=1)
7 - :B1 (NUMBER, Primary=1)
8 - :B1 (NUMBER, Primary=1)
9 - :B1 (NUMBER, Primary=1)
10 - :B1 (NUMBER, Primary=1)
Predicate Information (identified by operation id):
1 - filter( IS NOT NULL)
3 - access("IMMEDIATE_PARENT_ID"=:B1)
4 - filter( IS NOT NULL)
6 - access("ULTIMATE_PARENT_ID"=:B1)
7 - filter( IS NOT NULL)
9 - filter("AFFILIATED_ID"=:B1)
10 - filter( IS NOT NULL)
12 - access("JOINT_VENTURE_ID"=:B1)
filter("JOINT_VENTURE_ID"=:B1)
13 - filter( IS NOT NULL)
15 - filter("SUCCESSOR_ID"=:B1)
16 - filter( IS NOT NULL)
18 - access("CP_TAX_AUTHORITY_ID"=:B1)
19 - filter( IS NOT NULL)
21 - access("CP_PRIM_REGULATOR_ID"=:B1)
22 - filter( IS NOT NULL)
24 - filter("DUPLICATE_OF_ID"=:B1)
25 - filter( IS NOT NULL)
27 - filter("REG_AUTHORITY_ID"=:B1)Oracle Version : 10.2.0.4 RAC 2 nodes
Is there any possibility to rewrite this sql to avoid filter operation.
Please let me know if you need any more details....My bad..i overlooked the execution plan.
Below execution plan has been extracted from devlopment database which is exact replica of production database.
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads |
|* 1 | FILTER | | 1 | | 1 |00:00:00.72 | 8028 | 5986 |
| 2 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | 0 | 0 |
| 3 | PARTITION RANGE ALL | | 1 | 1 | 1 |00:00:00.72 | 8028 | 5986 |
|* 4 | TABLE ACCESS FULL | ONS | 1 | 1 | 1 |00:00:00.72 | 8028 | 5986 |
|* 5 | FILTER | | 1 | | 1 |00:00:00.19 | 7 | 0 |
| 6 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | 0 | 0 |
| 7 | PX COORDINATOR | | 1 | | 1 |00:00:00.19 | 7 | 0 |
| 8 | PX SEND QC (RANDOM) | :TQ10000 | 0 | 1 | 0 |00:00:00.01 | 0 | 0 |
| 9 | PX PARTITION RANGE ALL| | 0 | 1 | 0 |00:00:00.01 | 0 | 0 |
|* 10 | INDEX RANGE SCAN | IDX_ULTIMATE_PARENT_ID | 0 | 1 | 0 |00:00:00.01 | 0 | 0 |
|* 11 | FILTER | | 1 | | 0 |00:00:00.11 | 1231 | 0 |
| 12 | FAST DUAL | | 0 | 1 | 0 |00:00:00.01 | 0 | 0 |
|* 13 | INDEX FAST FULL SCAN | PK_ORG_AFFILIATED_WITH | 1 | 1 | 0 |00:00:00.11 | 1231 | 0 |
|* 14 | FILTER | | 1 | | 0 |00:00:00.01 | 7 | 0 |
| 15 | FAST DUAL | | 0 | 1 | 0 |00:00:00.01 | 0 | 0 |
|* 16 | INDEX FAST FULL SCAN | PK_ORG_JOINT_VENTURE_OF | 1 | 1 | 0 |00:00:00.01 | 7 | 0 |
|* 17 | FILTER | | 1 | | 0 |00:00:00.02 | 229 | 0 |
| 18 | FAST DUAL | | 0 | 1 | 0 |00:00:00.01 | 0 | 0 |
|* 19 | INDEX FAST FULL SCAN | PK_ONS_SUCCEEDED_BY | 1 | 1 | 0 |00:00:00.02 | 229 | 0 |
|* 20 | FILTER | | 1 | | 1 |00:00:00.01 | 3 | 0 |
| 21 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | 0 | 0 |
|* 22 | INDEX RANGE SCAN | IDX_CP_TAX_AUTHORITY_ID | 1 | 2 | 1 |00:00:00.01 | 3 | 0 |
|* 23 | FILTER | | 1 | | 1 |00:00:00.01 | 3 | 0 |
| 24 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | 0 | 0 |
|* 25 | INDEX RANGE SCAN | IDX_CP_PRIM_REGULATOR_ID | 1 | 1 | 1 |00:00:00.01 | 3 | 0 |
|* 26 | FILTER | | 1 | | 1 |00:00:02.20 | 28923 | 21562 |
| 27 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | 0 | 0 |
| 28 | PARTITION RANGE ALL | | 1 | 1 | 1 |00:00:02.20 | 28923 | 21562 |
|* 29 | TABLE ACCESS FULL | ONS | 1 | 1 | 1 |00:00:02.20 | 28923 | 21562 |
|* 30 | FILTER | | 1 | | 1 |00:00:00.01 | 4 | 5 |
| 31 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | 0 | 0 |
| 32 | PARTITION RANGE ALL | | 1 | 1 | 1 |00:00:00.01 | 4 | 5 |
|* 33 | TABLE ACCESS FULL | ONS | 1 | 1 | 1 |00:00:00.01 | 4 | 5 |
| 34 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | 0 | 0 |
Predicate Information (identified by operation id):
1 - filter( IS NOT NULL)
4 - filter("IMMEDIATE_PARENT_ID"=:B1)
5 - filter( IS NOT NULL)
10 - access("ULTIMATE_PARENT_ID"=:B1)
11 - filter( IS NOT NULL)
13 - filter("AFFILIATED_ID"=:B1)
14 - filter( IS NOT NULL)
16 - filter("JOINT_VENTURE_ID"=:B1)
17 - filter( IS NOT NULL)
19 - filter("SUCCESSOR_ID"=:B1)
20 - filter( IS NOT NULL)
22 - access("CP_TAX_AUTHORITY_ID"=:B1)
23 - filter( IS NOT NULL)
25 - access("CP_PRIM_REGULATOR_ID"=:B1)
26 - filter( IS NOT NULL)
29 - filter("DUPLICATE_OF_ID"=:B1)
30 - filter( IS NOT NULL)
33 - filter("REG_AUTHORITY_ID"=:B1)It took just 2.20 seconds, but why does it causes more CPU resource ?
We are about to plugin new module in this database, hence ONS table is partitioned, its partitioned on column PROVIDER which seperates existing and new module in to different partitions which makes easier for loading wihout affecting existing module data(We also make about to load partition local indexes to unusable state). Also this table is the parent table for about 6 child tables. So we decided to partition even child tables by adding PROVIDER column to all child tables and partition on this column. Parent-Child relationship is built upon ID column in all the tables.
All the sql's will be altered to use PROVIDER column for filtering old and new module data.
Do you think we are in right approach, I would be thankful if you can help me here for precise designing of this table.
As a side thought - and one I would have to investigate - since you have declared a number of inddexes with "case insensitive sorting" - is is possible that you could work around this idea to drop a few of the existing indexes on "lower(column)" and use case-insensitive indexes for these comparisons ?Will test it in development database, but what is the performance improvement prediction? And please let me know your suspects which claims "lower(column)" should be avoided and use case-insensitive indexes.
Anyway we are implementing Text-Index on this table and drop all the unwanted indexes.
I've written a short note on my blog about the "exists subquery" and the varying cost of the tablescane linesI am regular reader of your blog, after seeing your test case i understood the concept crystal clear. Thanks a lot.... -
How to use aggregator with filter operator
Hi,
how can i use aggregation with filter operator. i have a table, form this table i have to calculate this valurs
1. no of notes
2. no of open notes where attribute =y (logic for one notes is count(notes) where attribute =y)
2. no of closed notes where attribute =n
for this i used like this
table --> two filter operators 1 is for attribute =y and one is for attribute=n ----> to aggregaror operator. --- i am getting error.
Regards,
JyothyJyothy,
Try this..
U can use the below code in the aggregator without filters
sum(decode(notes,'y',1,0) adn sum(decode(notes,'n',1,0)
Regards,
Sivarama -
How do i use PL/SQL function in filter operator
Hi,
i want to use one pl/sql function in filter operator. how do i use it in filter condition.
error i am getting is
" error occured during expression validatation.
my filter condition is
INOUTGRP1.LAST_UPDATE_DATE > "GET_LAST_UPDATE_DATE"()
can any one suggest me what is the problem for this error.
Regards,
JyothyI tried and getting the same error. don't know why!!
However, There is another way of accomplishing it.
You can add a "Mapping Input Parameter" to your mapping and in the default value field call the function "Get_Last_Update_date". Then add the output field from this operator to the filter operator. Then edit the filter condition to replace the function call with output value from the Input parameter operator.
This should work... -
Can Oracle Identity Manager be installed on windows vista operating system
can Oracle Identity Manager be installed on windows vista operating system?? I get the following error while installing OIM 9.1.0 on Weblogic application server 10.3.
userLanguage = en
userCountry = US
java.io.FileNotFoundException: <Installation Directory>\xellerate\logs\setup_weblogi
c.log (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileReader.<init>(Unknown Source)
at com.thortech.xl.installer.event.InstallScript.checkSetupLogStatus(Ins
tallScript.java:2280)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.invokeJavaMet
hod(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.executeAction
(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.run(Unknown S
ource)
at com.installshield.event.ThreadPool.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
at com.thortech.xl.installer.event.InstallScript.onExecutingPostInstallM
essage(InstallScript.java:1919)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.invokeJavaMet
hod(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.executeAction
(Unknown Source)
at com.installshield.event.ActionSequenceEngine$ActionTask.run(Unknown S
ource)
at com.installshield.event.ThreadPool.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Edited by: user10691333 on 28 Aug, 2011 12:05 PMhttp://www.oracle.com/technetwork/middleware/ias/downloads/idm-certification-101401-083012.html
This is the cert matrix of OIM. Please check if you are using the right OS version. -
What is the differene between filter operation and NL semi join?
Hi, all.
The oracle is 10gR2 and 11gR2.
There are differences between filter operation and HASH/MERGE semi join in processing subqueries.
But I could not see the difference between filter operation and NL semi join?
(the only thing I know is that filter operation has caching mechanism, but I am not sure in case of NL semi)
What are the pros and cons of each of them?
Thanks in advance.
Best Regards.>
The oracle is 10gR2 and 11gR2.
>
Those aren't 'version's. What are the 4 digit versions?
>
There are differences between filter operation and HASH/MERGE semi join in processing subqueries.
>
What are they? When you make a statement like that post the information (and links to it) that backs up your statement.
>
But I could not see the difference between filter operation and NL semi join?
(the only thing I know is that filter operation has caching mechanism, but I am not sure in case of NL semi)
>
We can't 'see the difference' either; you didn't post anything for us to look at.
>
What are the pros and cons of each of them?
>
Each of what? Again - you need to be as specific as possible if you want specific feedback.
Also, since you generally should not use hints in production code anyway what difference does it make what the differences are? Oracle will make the choice.
Without anything specific to comment on about all we can do is provide several links that talk about joins and how to produce and examine them. These are all from Jonathan Lewis's Scratchpad:
http://jonathanlewis.wordpress.com/?s=semi-join
http://jonathanlewis.wordpress.com/2010/12/20/index-join-4/
http://jonathanlewis.wordpress.com/2010/08/15/joins-mj/ -- merge joins
http://jonathanlewis.wordpress.com/2010/08/10/joins-hj/ -- hash joins
http://jonathanlewis.wordpress.com/2010/08/09/joins-nlj/ -- nested loop joings
http://jonathanlewis.wordpress.com/2011/06/08/how-to-hint-1/ -- how to hint for joins
Check out those articles. Pay attention to how, in each one, he doesn't just provide a text description but also provides code and explains the code.
In other words he provides all of the specific information needed to illustrate what he is talking about. That is what you need to do if you need help with a specific topic: provide the query, plans and output that you yourself are using as the basis of your question. That lets us see EXACTLY what you are talking about.
Maybe you are looking for
-
Extra Firefox transparent window stays open in WIndows 7
Hello, I am using Firefox 35.0.1 and just today something strange has started to happen. In my task bar when I open Firefox as I am sure you know, an icon appears in the lower left. As you also probably know when you open more than one window you can
-
2.1 update bricked my phone (yes, bricked)
opened up itunes this morning at 9AM EST to find the 2.1 update ready and waiting to be downloaded. okay, so I got it and tried to install it. set me into the endless restore/DFU loop. so far I've tried: -at least 10+ recovery attempts in DFU AND rec
-
Why iCloude wont open from windows 8, start apps?
How can I configure iCloud and iCalendar to open from Windows 8 start apps?
-
Hi Experts, I have a requirement like I have to create the MI applications in English as well as in Hindi (an Indian language). The application is ready, now I have to upgrade it to support Hindi language only, mainly the labels and hard-coded text s
-
Any ideas? I'm on a MacBook Air.