No actual Records in 2LIS_02_HDR

I'm very familiar with delta loading process (and complete setup) for the logistics datasources like  2LIS_02_HDR, 2LIS_02_ITM and 2LIS_02_SCL.
We have attached 3 source systems to our BW and 2 of them are working absolutely without problems.
Complete customizing, LBWE setup and Delta initialisation was performed the same for all of those systems. Two of them deliver correct delta packages; but one is making difficulties.
I therefore tried to use the FULL LOAD for those datasources (2LIS_02_HDR, 2LIS_02_ITM und 2LIS_02_SCL).
But this isn't working the way I would expect: the full load contains only those records which are in the setup tables MC02M_0HDRSETUP, etc.
Newer data is not available when checking the datasources in RSA3.
Remark: I did my last sucessfull delta initialisation on 12. of mach; the latest available data in RSA3 are those until 12. of march when running a full load.
Shouldn't the full load deliver allways all data (independent of the initialisation table)?
Or did I miss to setup an additional job?

Thanks for this fast answer.
Do I need to run the delta job (in LBWE) which should fill the delta pointers (LIS-BW-VB_APPLICATION_02_600)
at all?
Or can I just plan a daily filling job for the initial table update

Similar Messages

  • Is there any way to PAUSE/RESUME the actual recording while recording a Video Demo slide in Captivate 8?

    If I have to take an "off-screen" action while recording a video demo slide in Captivate I am forced to END and start a separate video demo to continue.
    This fragments my demo and seems an unnecessary set of steps.
    Is there a way to pause the recording for long enough, say to clear my throat, and then resume?
    Thanks.

    Hi kjjr54,
    Please refer to the link below:
    Create Mobile Learning & Elearning Content. Screen Capture, Screen Recorder | Adobe Captivate 8
    Hope this helps!
    Regards,
    Sheena

  • How can we monitor the audio after the cleanup process before we actually record the trans

    I have the Sound Blaster Audigy 2 ZS board and I am using it to transfer vinyl records to make CDs. Before my upgrading of Creative Media Source 2 to Creative Media Source 5, I was able to monitor the audio after the cleanup prior to the transfering process. Now I can only monitor the sound at the line input point and not after the cleanup process. Is there any way that we can do that?Vinylrecord

    Assuming you mean Actions when you say "Batches", use this menu...
    1.  Click on the name of the actions set you wish to save.
    2.  Click the fly-out menu icon at the upper-right corner.
    3.  Save Actions, put them someplace on your hard drive other than in the Photoshop installation area.
    -Noel

  • Using the magnify button in Ancestry.co.uk, the cursor will not move away from the actual record window. The only way to exit is Alt F4 which closes Firefox. When reloading, Firefox reactivates the same record but without the magnify button activated.

    The magnify also does not function properly.

    There is an easier work-around. Rather than closing the browser, completely, you just have to get the system to change the focus. You can do this by pressing ALT+TAB (to switch windows). Then, you can turn the magnify option off and just go with the Zoom. (There is a secondary problem, in that the last magnified section of the image stays magnified. Going back to the record and then back into the image will clear that. But at least you don't have to close the entire browser!)

  • $FLEX$. references - how to get the actual record id as a reference

    Hello,
    I'm using the DFF with title 'Customer Information' from Receivables, which is on a customer account (hz_cust_accounts table). How do I retrieve the actual row's PK/cust_accounts_id or the account_number being edited on the page?
    I tried $FLEX$.ACCOUNT_NUMBER
    (since ACCOUNT_NUMBER was defined as a column in the DFF registration),
    but this didn't seem to work.
    ==
    Thanks. Gina.

    Gina,
    Can give us the details of what you are trying to achieve?
    It is unclear whether you are using the accout number as a segment in the DFF registered against customer accounts (Why would do that?). Are you trying to capture more information against one customer account number in a DFF?
    If you are in the customer account block and usually you get any value in that block with this notation:
    :BLOCK.ACCOUNT_NUMBER where block refers the current block you are in.
    Is this what you are looking for?
    Thanks
    Nagamohan

  • Any further info on actualizing recording capabilities?

    I'm a musician who plays live at jam sessions here and there and would appreciate some easy and decent recordings. As absurd as it sounds I sometimes record my playing through my Sony digital camera ( it has mov. capabilities) and the sound isn't that bad so obviously I am not looking for CD quality. As always thanks. dennis

    Me too. This could really be one of the best features on this thing.

  • How can I see what I'm actually video recording on iPad Air so that I don't include extra stuff at the borders of the image? It seems to automatically "zoom in" on the screen, but when I export the video, the picture isn't framed well.

    When I try to record a video on the Ipad Air, the screen automatically "zooms in" closer than when I'm taking a photo. So I frame the interview and record it. But when I export it to post it or edit it, I discover that only the screen was zoomed in, the camera wasn't, so I have all this extra stuff around the edges of my frame.
    I don't need to zoom in, but I do need to be able to see what I'm shooting--otherwise, as I'm videotaping, I'm guessing at my picture's framing. But every time I switch from photo to video mode, the screen "zooms in." How can I see what I'm actually recording?
    I've been searching for an answer for this for a while, but I can't find any responses to it! Thanks.

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • A good solution to set the actual data record after execute query ..

    Hi,
    in my Form there is a block on a temporary table.
    The user can add query results and wishes to save the last data focus on the last actual record before the execute query to restore this focus after the query.
    Is there a robust and fast solution to save the
    actual data focus - execute_query - restore the saved focus ?
    Thanks
    Friedhold

    Here is a simple solution to try:
    Create a package specification in your form: Package P0 is
      Save_rowid  varchar2(30);
      Found_rec   number;
    End;Create a Key-Entqry trigger on your block: P0.save_rowid := :Myblock.rowid;
    P0.Found_rec := null;
    Enter_Query;Create a Post-Query trigger on the block: If :Myblock.rowid = P0.save_rowid then
      P0.found_rec := :system.trigger_record;
    End if;Create a Key-Exeqry trigger on the block: Execute_Query;
    If P0.found_rec is not null then
      Go_record(P0.found_rec;
    End if;

  • Recording Stand-alone Soft Synths & Virtual Instruments in Audition 3

    Hi People,
    Have a little problem which I'm struggling to figure out.
    I have been using Cool Edit Pro for several years. My set up has always enabled me to record any standalone Software Synths via my sound card. I have always had it set up so my sound card plays through patch one and records through another patch enabling me to record in the multi track editor with no problems at all and my set up records only the soft synth/instrument, and not any waves previously recoded. Instead just plays them back so I can build up my music and play along at any given time. Although this is a rather different approach to doing things, it suites me down to the ground and I'm happy to create this way
    My problem has come upon whilst trying out the new Adobe Audition 3, which is based around ASIO Drivers. Because of this I can no longer run another program (Stand alone soft synth), because Adobe hogs the ASIO driver and will not allow another program to be run at the same time. I can use the Adobe windows driver for audition no problems and I am able to continue recording how I did with Cool Edit, but I would much prefer to go along with auditions ASIO drivers to make sure I am recording with the best quality and reliability.
    My Sound card is an E-MU 1616 with breakout box. I have tried numerous ways with the patch mixer to get around this, for example I have tried using my sound cards driver for audition and ASIO4ALL2 for my soft synths. One of which is Hypersonic 2, and the other being SampleTank. I cannot for the life of me get my set up and running how it was with cool edit.
    I must admit that although I have played around with my settings, it could be something simple I need to do that just hasn't jumped out at me yet. My evaluation of Audition 3 runs out in 20 days and I'm almost sure that there is a way to enable my set up to work how I want it to before I can go out and buy Audition 3. I'm very comfortable with audition 3, naturally. I love the changes and extra features it has now along from the cool edit days.
    I have looked into other solutions as well after scouring message boards, one of which was Cycling 74 Soundflower, this sounded like it could be an answer but unfortunately it is Mac only. If Adobe did Audition for Mac then I wouldn't hesitate in going down that route...
    My other solution is to have a second computer, either a modified mid range P C, or even a Mac, to act as my synth station and have my various software synths and such running on there and playing out to my recording PC with Audition on. This would free up the ASIO to be used by Audition solely. It's a long way around but wouldn't cost the earth and would be a simple enough idea to set up. But surly, I shouldn't need to go this far out to get my ideal setup.
    Anyhow, I would much appreciate any advice and ideas to help me solve this problem; I will keep working at it in the mean time.
    Hope my explanation makes sense above, I can appreciate that there are other ways like just going along with another program and such, but in all honesty I like the way I work and don't really want to move on, I'm more bothered about just getting on and recording new ideas in the environment I'm so use to. I love the way Cool Edit/Audition works for me and I have developed my own methods with the software over the years. Working with just audio suits me to the ground as I record and chop up my own Guitar bass and drums, along with sounds from my field recorder and a host of other methods and ideas.
    Thanks in advance

    Hi!
    As long as your softsynths comes in the VSTi format (most of them do now), you can insert it on a track in Audition, which has 'host' capabilities from V3.
    In the Multitrack, insert a new MIDI track from the 'Insert' menu (note: MIDI Track, not just 'MIDI').
    On that track pane hit the 'Sequencer' button, and it will open in a separate window. In the pane left of the keyboard you can insert your VSTi of choice, and make your MIDI connections.
    Back on the Main track pane, engage the 'L' button for Live monitoring. Actual recording (of MIDI) is done in the Sequencer window.
    The usual, and recommended workflow is to keep the MIDI tracks 'open', i.e. you can edit the sound in your instrument and even the notes played at any time in the process, compiling the actual audio as the last step in the mixing.
    If you kind of 'insist' on doing it the old way, you can export the audio from your recorded MIDI+VSTi creations track by track like this: Leave the Sequencer window open, make a selection in the multitrack that covers the time span you have played. Solo the track (will mute all others), and use File / Export Audio Mixdown. Use 'Master' as the source. This will give you a wave rendering of what's currently in the MIDI sequencer. Qualitywise this is better since it's all internal and digital instead of in/out of soundcards with DA/AD conversion etc.
    I haven't found a method for a 'live' wave recording while you play, but there may be one...
    If you purchase Audition it comes with Help files explaining this in more/better detail. ;)

  • Recording real instruments in stereo?

    I use an M-Audio fireWire Solo and plug bass or guitar into the channel 2 input. In Logic I then have to set the track to mono, select 'input 2' to get a signal. If I select 'inputs 1 and 2' whilst in stereo the signal goes only to the right channel. Is there something I should be doing, or is this a limitation of the interface or software..? I wouldn't mind so much if it didn't keep defaulting to stereo when I plug in....would be handy to cut out the extra clicking just to hear myself.

    But unless you have two outputs from the instruments, or two mics on your guitar, you are in actuality recording a mono source. When you run your guitar through the processors it probably looks like a stereo meter because of some plugin. Record it mono, and then just add processing that makes it sound stereo.
    When you are using your insert templates, you are probably using something in the chain that has a mono-to-stereo effect, like an amp modeler or delay or chorus, etc. You could change the ones that bother you to all mono settings, then save your changes to the channelstrip (click and hold on the word insert, then name and save it - you may want to make a folder for your settings inside this area), so you could load your own settings that don't automatically change to things you don't want or need.
    Corey

  • Record all the data acquired by DAQ

    Hi all,
    I have a problem when I tried to record all the data acquired by the DAQ card. My DAQ is NI 6259, and the Labview version is 2009.
    Basically, what I need do is using multiple channels to get the voltages of different point, then I subtract values of two channel (V+ and V-) to get voltage value between two points. In my vi, the sampling mode is continuous and the rate is 100 KHz, DAQmx reading is inside a while loop, and the numbers of samples per channel is set to be 100. After each loop execution I would get 100 data.  I just used the format into file to write the data into a .txt file. It seems after 1 loop only the last one data is recorded instead of 100.  Previously I averaged the 100 data inside the acquisition loop to get one data, so the writing function is OK but it really slows down the program. So I want to write all the raw data to txt file so later I can process them in Matlab.  Is there any way to achieve this? Thank you very much.
    The attached is the my vi for 2 channels voltage measurement and the current source control sub vi. I am new to Labview so the question really bothers me even after I read some similar topics in the forum.
    Regards,
    Hongxiang
    Solved!
    Go to Solution.
    Attachments:
    Dual Channel Voltage Measurement.vi ‏33 KB
    Current Source 1.vi ‏49 KB

    Thank you for you reply. I tried that, it actually record more data per pulse than before, but less pulses were  recorded (there should be 8 pulses in 20 seconds time but only 2 were recorded), I think it was because the for loop inside slows down the program execution, and sometimes the error 200279 occurred.  I think it would be better to separate the reading and recording process. Someone suggests me rather than writing to the file inside the loop, accumulate the data from all of the loop iterations to generate one large array containing all of the samples then pass that to Format Into File outside the loop. Do you know how to achieve that? I tried the as below, it seems totally wrong , only two data was written. 
    (The subvi nameed 1 (see attachment) converts the 2D array to 1D ) Thanks.
    Attachments:
    2D_Data_Reader.vi ‏9 KB

  • Is it possible to lock an audio track in "record enabled" mode?

    Here's how i write... i set up a drum loop to play for around 20 minutes, then I rec-enable one audio track to record vocals, and then finally, I skip around among hundreds of different midi tracks.
    I just hit the down arrow button, and scroll through dozens and dozens of midi tracks. I quickly hit the keyboard to listen to the sounds. If i like a particular sound, i just want to hit record, and instantly record my vocals along with the midi performance.
    Unfortunately, when i hit record, the vocal/audio track doesn't record. Right at the moment when i find an inspiring sound and hit record, the vocals just don't record.
    I'm forced to scroll miles up the arrange window, to find
    the vocal audio track. It's still blinking the red "rec" button, but this is misleading. It's not actually record enabled. I have to hold down shift, hit it once to turn it off, then hit it again to re-activate record function.
    Only then can i record the midi AND vocals.
    What I want and need is sooooooo simple to offer as a function, yet totally ruinous to my creative flow if it's not possible. (I used to do this easily on the far inferior
    Cubase VST 5.1, OS 9)
    Is there a way to record enable an audio track, so that,
    until I specifically disable the record function, it's
    ALWAYS ready to record the second I hit the record button?
    Even after I've been hitting the down arrow to audition
    various midi channels?
    MacPro 3ghz, 8 gig RAM, 3 raptor drives   Mac OS X (10.4.10)   Logic 7.2.3, Kontakt 2 soft-sampler, RME 400

    I tried to build screensets like you suggested. If I could
    get this to work, I think it would be a great solution, but
    I'm having serious problems.
    I opened a separate mixer, with just the single vocal/audio
    track showing.
    Then I opened the main mixer, which has all the faders.
    If I record-enable a midi track, and then hit the record-enable button on the audio track, the midi track becomes un-enabled. Incredibly frustrating.
    The only way I've been able to do it has been to record-enable the vocal track, and then start recording.
    Only if Logic is actually recording, can i then record-enable the midi track without deactivating the audio
    track.
    A big problem is, that when i click to record enable the
    vocal track, the arrange window jumps all the way up to the
    top, where the audio track is. THen i'm forced to travel
    down, to re-find the midi track.
    You mentioned in your post that the mixer needs to be
    "unlinked". HOw is this done? Will it be possible for
    me to click on the record-enable button on the mixer's audio track without the arrange window jumping to that track?

  • Mapping is inserting multiple records from a single source to Dimension.

    Hi All,
    I am very new to OWB. Please help me out. I've created Dimension with the help of the wizard and then a mapping which consist of single source and single dimension. The mapping is populating nearly 500 times of the actual records. Following are some details to give you a better understanding of mapping: I created a dimension with four levels and two hierarchy. Levels are L1, L2, L3 and L4 and hierarchies are H1-> L1, L2 and L4
    and H2-> L3 and L4. L4 is lowest level of hierarchy. L1 and L3 are parent levels in the respective hierarchies. I assigned an attribute of each level as Business identifier that means business identifier attribute is different in each level. In mapping I mapped the parent natural key(Key for parent Level in a hierarchy) as the value which has been mapped for parent level. The result is coming 500 times of the record that exist in source table. I've tried even single common business identifier for each level but again the result is 5 times of the records. Please let me know the solution.
    Thanks is advance.
    Amit

    Hi ,
    You may not be having multiple records in your dimension.
    To understand better the records insertion, try a snow flake version of the dimension and see how the records are inserted as per the levels in the respective tables.
    Thanks

  • Possible to record solo automation from a MIDI controller?

    I am using a Novation SL MKII midi controller with Automap in Logic Pro 9.  I am trying to figure out how to record the solo automation feature from the MIDI input.  I select the track, and then select the 'Solo' section from the automation tools.  I then select Touch or Latch. (I've tried both)  When I push the MIDI button I can see that it does change the state of the track from solo on/off successfully, so the input is working fine.  But as I try to record it, nothing happens, no information about the state change is actually recorded. 
    Here's the strangest part, it works fine when I record mute automation... but not solo.  Any common reason this is occurring?

    Well, I don't know much about the kit you are using, but I do kow a bit about the midisport as I use one for my live setup. It should appear in the environment under clicks and ports. As for start and stop, although I have never tried this, I imagine it's possible through key command setup. Here you ought to be able to select play, learn the asignment and press the button. I'm not certain that this will work, and I'm pretty sure that some transport items won't work (like RTZ) but surely it should work. All I can say is give it a try!
    If any of this doesn't make sense, I suggest a read of the manual about key commands. They are part of what makes Logic so powerful, and you should note that Logic has some functions not available any other way that are very powerful. Equally, if you want to start having fun with MIDI, a readup on the environment will help too. Ah, the possibilities are almost endless...
    Any qs on it, don't hesitate to post back. I hop these pointers might help you on your way,
    Best, Fred

  • Is there anyway to record more than one track at a time on garageband for ipad?

    Just wondering if that is possible or in the works?

    GarageBand for iPad only allows to record on one track at a time. That is the selcted one that turns into the Instrument View where the actual recording is done.
    If multi-track recording is in the works, nobody know except Apple and they won't usually pre-announce that kind a things. My guess, it will not be implemented.
    Hope that helps 
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/ 'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Maybe you are looking for