No Administrator! Help!

Hello, I just got my computer 2 days ago & I was about to load some software when I had to put in an administrator name/password & it was not accepting mine. I figured that was because my account [the only account on this computer] was not listed as an 'admin'. The part I don't get is that even though I'm not listed as an admin, when I type in my name & password it tells me to try again & gives me my password hint. Why would it do this if I'm not an admin? Help! I need to load & use this software very soon!

Same thing happened to me. Have a look at this Apple KB Article. If you only have one account it'll be an admin account by default. You just "lost" it for lack of a better description.

Similar Messages

Can user Reset the Password without Administrator help in MS Exchange server 2013

Hi Team
IT is possible for user to reset the password
in MS Exchange server 2013 without Administrator help? (by getting mobile verification code how we get in Gmail ,& Outlook )
if it is possible ,kindly send me the configuration URL to my Mail ID [email protected] & [email protected]
Thanks & Regards
Dinesh.s
+91 9566958700

You would have to assign Admin role permission to users in EAC.
To understand this concept in more depth, I would refer you at this well described article : http://www.mustbegeek.com/reset-user-password-in-exchange-2013/
Or, you may use any third party like, (http://www.selfservicepasswordreset.org/) that seems to be an appropriate approach in your environment. This tool allows end-users to perform self password reset
and self account unlock from any computer in the network through a web-browser or directly from the login screen without any assistance from the administrator. Administrator can configure strong policy for automatic account unlock and automatic reset
password at a specified time for any particular domain OU's.

XI administration, help

Hi forum,
I m quite new to XI administration, can the forum provide me with a list of checks
that is needed to ensure that all the components of XI are healthy,
for example ... checking all ports(Http, SMTP, etc), all RFC destinations, etc,
and cases when the java stack is down and Integration Builder is not accessible(hence SLD and RWB is not accessible),
thanks

Hi ,
Please find the link for post instalation of XI.
Please doublechek that you copleted your install of XI 2004s as follows:
1) Installation steps according to the Guide: SAP NetWeaver 2004s
ABAP+Java on Windoes : MSSQL for PI installation
2) Configuration : Go to the following:
http://service.sap.com/instguidesNW2004s -> Installation -> Technology
Consultant's Guide. -> Enabling Application-to-Application Processes ->
Application-to-Application Integration -> Configuration of Usage Type
Process Integration (PI) -> Template-Based Basic Configuration.
You can use either the Template-Based Basic Configuration to carry
out the configuration steps OR you can do the configuration steps
manually:
Please see the following link regarding this:
http://help.sap.
com/saphelp_nw04s/helpdata/en/61/6e8c42c398173be10000000a155106/frameset.htm
3)For the central SLD, further manual steps are required.
For more information, see SAP Note 939592.
4)If you want to use an Integration Server client other than 001
further manual steps are required. For more information, see SAP Note
940309.
Warm Regards,
N.Jain
(Assign points if useful)

I have a laptop notebook hp compaq 6735b bios passwort administrator help me

he has a problem in the BIOS administrator password and I pray you to tell how the leaves, but not just from the cd let the jet only boot that can formatting pc or qi is possible to give me a list of how len passwortat company for laptop hp administrator passworts. please help me.

HI there
Only way to remove BIOS password in those notebooks is to exchange mainboard.
This is business laptop, sorry.
Click on KUDOS icon if helped

Administrator help

I just downloaded an update for photo to movie but can't install the update.
i get this ;
photo to movie does not have permission to write to the application's directory ! Are you running off a disc image ? If not, ask your administrator for help.
I have absolutely no idea how get into the administrator for help.

The easiest way is to host it online, then just copy the link here like this...
http://web.fastermac.net/~bdaqua/MUDSKIP2sm.jpg
Or embed it with html code...
View the Source and search for embed to see how to construct the line.

ANY DOCEMENTS OR ANY LINKS ON SAP EP ADMINISTRATION HELP ME

I AM INTERESTED IN SAP EP HELP ME.

Hi Gopal,
Please check this link for elearning Enterprise portal
https://www.sdn.sap.com/irj/sdn/portal-elearning
then for administartion for EP
https://websmp109.sap-ag.de/nw04maintenance
checkout this if this link is helpful reward points welcome
regards,
S.Rajeshkumar

I have to log into CS5 as an Administrator- help!

I am not able to log in to CS5 the regular way but have to do so as an administrator. What do I need to do to log in normally?

Hi
Please follow the steps mentioned in this document :
http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html
Thanks,
Sanjit

SharePoint 2013 "Help Menu" not working (Sorry, the page you're looking for can't be found)

The Built in SharePoint 2013 Help Menu (?) on our Enterprise Farm for both the sites and Central
Admin does not work.
On Central Admin help the error comes back as: "Sorry, the page you're looking for can't be found".
The site collections Help menu gets the error :
"Unfortunately, help seems to be broken...
There aren't any help collections in the current language for the site you're using."
We have installed on all servers in the farm:
December 9, 2014 Cumulative Update for SharePoint Server 2013 package (build 15.0.4675.1000)
as well as the latest SharePoint update KB2768001 1/15/2013.
I have checked:
Get-SPHelpCollection
Title
Name
SharePoint Help
WSSEndUser.1033.15
SharePoint Foundation 2010
WSSEndUser.1033.12
Central Administration Help
WSSCentralAdmin.1033.15
SharePoint Server 2010
OSSEndUser.1033.12
SharePoint Help
OSSEndUser.1033.15
SharePoint Foundation 2010 Central Administration
WSSCentralAdmin.1033.12
Teacher Help
EDUTEACHER.1033.15
Central Administration Help
OSSCentralAdmin.1033.15
Student Help
EDUSTUDENT.1033.15
SharePoint Server 2010 Central Administration
OSSCentralAdmin.1033.12
PerformancePoint Dashboard Designer 2010 Help and How-to
DashboardDesigner.1033.12
The URL for the site collections is https://servername...../_layouts/15/help.aspx?Lcid=1033&Key=HelpHome&ShowNav=true
We are only using Default English (US) language packs.
In the directory of
Directory of C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\HCCab\1033
there are cab files.
There are no pending upgrades on any SharePoint or SQL server, all other SharePoint components are working
normally.
Any ideas or suggestions?
Thanks.
John


I'm interested in getting the local help to work while this is offline, I saw the following in an article, did you do this and it still does not work for you?
"However the help won’t show up in
SharePoint 2013 sites. You need to change the Help Collection item property SharePoint
Version to15 to
make it work."

Itunes won't download at all onto my laptop, please help!

itunes wont download onto my laptop, ive tried atleast 3 times and it just says error at the end,
this is a print sreen of it...
PLEASE HELP!!

See if running the installation application "as Administrator" helps.
It could be windows securtiy keeping the installation from configuring anything.
I hope that helps.
~Lt. Leviathan

Search Server 2010 Express Help Button doesn't work

I installed Search Server 2010 Express to crawl our file shares and give our users a decent full text search capability and it's working well. I noticed that the initial search page that comes up, where you would type in your search string, has a little
blue question mark icon at the top right of the page. When I click on that, it pops up a window and inside the window it says "Help content cannot be displayed".
I found some info that pointed me to Site Actions, Site Settings, Site Collection Administration, Help Settings. When I go here and click on the link for Help Settings, it comes back with, "An unexpected error has occurred".
I also found a link that said to reinstall help files by using the following SP Powershell command:
Install-SPHelpCollection -LiteralPath 'C:\Program Files\Common Files\microsoft shared\Web Server Extensions\14\HCCab\1033\MS.Wss.HC.Cab'
I try this and it says Source not found, even though I can confirm the path to the cab is correct and my user has permissions to see that file.
Can anyone help me with my Help button here? I have to give a demo for our users on how to use the Search Server, I know someone is going to click on the Help button link and it's going to say "Help content cannot be displayed" and then ask
me about it. I want to get it working. Thanks.

What does the powershell-command below return?
Get-SPHelpCollection
Kr, Rasmus
PS C:\Users\svcSPCA> Get-SPHelpCollection
Title
Name
Atskaišu izveides pakalpojumu palīdzība un jaunumi          SQLWSSAddIn.1062
Aide et nouveautés de Reporting Services                    SQLWSSAddIn.1036
Ajuda e novidades do Reporting Services                     SQLWSSAddIn.1046
Reporting Services Help en Nieuw                            SQLWSSAddIn.1043
Reporting Services Yardımı ve Yenilikleri                   SQLWSSAddIn.1055
Ajutor şi noutăţi pentru Reporting Services                 SQLWSSAddIn.1048
Ayuda y novedades de Reporting Services                     SQLWSSAddIn.1027
Novinky a pomocník doplnku Reporting Services               SQLWSSAddIn.1051
Reporting Services 帮助和新增功能                                  SQLWSSAddIn.2052
Ajuda e Novidades no Reporting Services                     SQLWSSAddIn.2070
Search Server 2010 Central Administration                   MSSCentralAdmin.1033
Справка и новые возможности служб Reporting Services        SQLWSSAddIn.1049
Βοήθεια των υπηρεσιών αναφοράς και τι νέο υπάρχει           SQLWSSAddIn.1032
Reporting Services – hjelp og hva er nytt                   SQLWSSAddIn.1044
Reporting Services Hjælp og nyheder                         SQLWSSAddIn.1030
Search Server 2010
MSSEndUser.1033
Pomoc i informacje o nowościach w usługach Reporting Ser... SQLWSSAddIn.1045
Reporting Services – עזרה ומה חדש                           SQLWSSAddIn.1037
Reporting Services – súgó és újdonságok                     SQLWSSAddIn.1038
Nápověda a novinky ve službě Reporting Services             SQLWSSAddIn.1029
Reporting Services Help and What's New                      SQLWSSAddIn.1033
SharePoint Foundation 2010                                  WSSEndUser.1033
التعليمات والجديد في Reporting Services                     SQLWSSAddIn.1025
Aruandlusteenuste spikker ja uudised                        SQLWSSAddIn.1061
Pomoć za Reporting Services i šta je novo                   SQLWSSAddIn.2074
Ayuda y novedades de Reporting Services                     SQLWSSAddIn.3082
Reporting Servicesin ohje ja uudet ominaisuudet             SQLWSSAddIn.1035
Reporting Services 說明與新功能                                   SQLWSSAddIn.1028
Помощ и новости за услугите за отчет                        SQLWSSAddIn.1026
Ataskaitų tarnybų žinynas ir straipsniai „Kas naujo?“       SQLWSSAddIn.1063
วิธีใช้ Reporting Services และสิ่งใหม่                      SQLWSSAddIn.1054
Reporting Services – Hilfe und Neuigkeiten                  SQLWSSAddIn.1031
Pomoč za storitev Reporting Services in njene novosti       SQLWSSAddIn.1060
SharePoint Foundation 2010 Central Administration           WSSCentralAdmin.1033
Довідка та нові можливості служб Reporting Services         SQLWSSAddIn.1058
Reporting Services туралы анықтама және оның жаңалығы       SQLWSSAddIn.1087
Reporting Services 도움말 및 새로운 기능                             SQLWSSAddIn.1042
Pomoć i značajka Što je novo usluge Reporting Services      SQLWSSAddIn.1050
Guida e novità di Reporting Services                        SQLWSSAddIn.1040
Reporting Services のヘルプと新機能                                 SQLWSSAddIn.1041
Reporting Services – hjälp och nyheter                      SQLWSSAddIn.1053

Is there any hope for Help Viewer?

I have read through as many discussions about Help Viewer problems as I can find, and still, help in Finder doesn't work. I have tried all of Dr. Smoke's suggestions and many others to no avail. Help Viewer still ends up going back to a blank screen, links that don't work, and the search just keeps searching.
All of the suggestions I have tried fix Help Viewer temporarily, but it has always gone back to its same old broken self.
If anyone out there can REALLY help, I would REALLY appreciate it.
Thank you!

Hi Jordan. Hopefully I can offer a solution for this which bugged me enough to really try to resolve it, and have now done so, at least for me.
First the essentials.
System Setup: Powermac G4 Dual 1GHz MDD. 1GB. MacOS 10.4.3
Issue: Loading Mac Helper from the Finder will result in a blank screen after the first launch. On first launch you will be able to click one or two links then it will not work and search will not function [issues may vary but blank screen always]
This problem occurred with earlier versions of Tiger. I have since done a clean install. Tried replacing the Help Viewer app from the Install disk and also the MacHelp.help document too, but it did not help. I even tried the same items from other disks just to check for corrupt files but still no change. Trashing the prefs does not seem to make any difference, nor the same with the cache folder but it can resolve other issues, just not this particular one.
NOTE Before others try this fix I strongly suggest you try the solutions suggested by Apple and those on the very good XLab web site. Here are a few related articles:
XLab. The most comprehensive guide to the Help issues.Check out the 'Help Viewer displays a blank window.' link.
http://www.thexlab.com/faqs/helpviewer.html
Apple. From the source. Not quite the same symptoms but offers Help advice on
'Mac OS X 10.2, 10.3: Mac Help Viewer unexpectedly quits'
http://docs.info.apple.com/article.html?artnum=107013
Solution:
1. Go to User > Library > Caches > com.apple.helpui [note: you need to launch Help Viewer at least once so that this folder is created]
2. Delete ALL files/ folders in the com.apple.helpui folder, if any.
3. Create a new folder inside com.apple.helpui and name it 'Mac Help' [the same as that created automatically by Help Viewer, case sensitive].
4. Select the new folder and use Command + I to see the folder 'Info'. First
label it red [to aid further diagnostics] and then change ALL the permissions at the bottom to *Read only* [click Details to see the options, not just 'You can'. Include Read only for 'Owner', 'Group' & 'Others'. You will need Admin access for this]. Close the Info panel.
5. Launch Mac Help from the Finder menu bar. If it was blank before, the Help Viewer screen should show the Mac Help homepage again. Try several links and search and Index. They should all work, and quicker now. Quit and relaunch. This time the Help Viewer works now and no blank screen. The issue with Mac Help is fixed ( but be aware that any other Help folders created could well cause the same issue, so check for these if it still happens and read on for details of how to deal with this other part of the issue)
*BUT*
Although this resolves the Mac Help issue, AS SOON AS OTHER MAC APPLICATION HELP's ARE LAUNCHED, IT IS MOST LIKELY THE ISSUE WILL RETURN!, hence the labeling of the Help folders red, to track newly created Help folders (i.e. Mail Help, Safari Help etc). If these are launched this automatically creates help folders in com.apple.helpui for them and they also cause the blank screen problem.
So, the best thing is to create Help folders in the same way that you did for Mac Help, for ALL Mac applications to avoid having to do it incrementally as and when you use another Mac application Help [or if you do a search it may well create folders anyhow]. These are the Help folders I have created, with the red label and 'Read only' permissions:
Activity Monitor Help
Address Book Help
AirPort Help
AppleScript Help
Automator Help
Bluetooth Help
Calculator Help
Chess Help
Console Help
Dictionary Help
Directory Access Help
Disk Utility Help
DVD Player Help
Font Book Help
Grapher Help
iCal Help
iChat Help
Image Capture Help
Mac Help
Mail Help
ODBC Administrator Help
Preview Help
QuickTime Player Help
Safari Help
Script Editor Help
Sherlock Help
Stickies Help
System Profiler Help
Terminal Help
TextEdit Help
There are probably more but these are the ones I could find fairly easily. If they are labeled red then it is easy to see if any others appear and cause the issue. Once I have done this I make a backup copy of these folders with the permissions set and archive it for use as and when I need to replace them.
Result: For me and my setup this has resulted in my being able to use Help normally without the blank screen issue for nearly two weeks now since I spent a lot of time looking at this issue. In fact I find Help works a lot faster and suffers fewer delays. Because this only requires amendments to file permissions, in a folder which is automatically replaced if deleted anyhow, I feel it is a safe and easy enough for most users to do if they have this problem.
I hope this offers a solution to other users with the same issue and who have tried the other suggestions (Including Dr. Smoke's and from Apple etc) but still have problems with the blank screen.
The Cause & Other Notes
Having been frustrated with this issue for several months now I spent some time trying to find the cause. It clearly does not effect everyone, and others have found the suggested fixes, such as trashing the com.apple.helpui cache folder and relevant preference files, have worked for them. It makes it a more complicated problem to identify. It appears perhaps to be related to your type/ speed of connection from the computer to the Apple help servers where the cache folders and files and downloaded from. This seems likely from error messages. It also appears that, for whatever reason, some of those files being automatically created when Help Viewer is launched are the actual problem. In order to explain why I think that, if you have this issue then you should get the exact same repeatable test which led me to find the solution.
Do this:
1. Firstly navigate to > Library > Caches > com.apple.helpui and trash this folder. Then before proceeding launch the following apps to help diagnose and follow what is happening:
a. Console [so you can watch for error message in console.log window]
b. Activity Monitor [to watch internet traffic during launch and browsing the Help Viewer]
c. Leave the FInder window so you can watch what happens.
2. Launch Mac Help from the Finder menu bar. It should launch and show the home page on the screen. Immediately you will see a new com.apple.helpui folder being created. Navigate into this so you can watch what is being placed in the newly created com.apple.helpui folder.
3. Now click on any of the Help links on the right (not the link to the apple web site). Immediately (slower if dialup and not already connected) you should see traffic over the network as the computer connects to the Apple help servers. Then, in the com.apple.helpui folder you will see a new folder called 'Mac Help'. Also some other numbered (0-15) cache folders which are not of interest right now. And on quit a file called 'TOCCache.plist' which does not effect things. Soon you should see an error in the Console console.log window something like this:
"2005-11-19 01:57:45.585 Help Viewer[1313] Exception raised during posting of notification. Ignored. exception: * End of archive encountered prematurely at 400"
I am not sure exactly why this is but it appears to be related to some sort of timeout and failure to fully download some items.
4. Now try to click on any link or Index. For me, nothing happens and I get only more error messages like:
"2005-11-19 02:02:21.190 Help Viewer[1313] Uncaught exception - * End of archive encountered prematurely at 400
2005-11-19 02:02:21.190 Help Viewer[1313] * Attempt to remove unrecognized exception handler 0xbfffdce0"
The only option is to quit out.
5. Immediately relaunch Mac Help. If it is like me then it will now be a blank screen accompanied by the following my critical error message:
"2005-11-19 02:03:33.543 Help Viewer[1319] * NSRunLoop ignoring exception '* End of archive encountered prematurely at 400' that raised during posting of delayed perform with target 375df0 and selector '_setupTOC'"
Now, everytime I quit a launch Mac Help it is the same error and blank screen.
This seemed to me to point towards an issue within the com.apple.helpui folder because when it is trashed Help Viewer will launch one time then stop.
So I went through each folder (I had a number of Help folders the first time) and tried moving it out of the folder, rather like testing for bad prefs in OS8.
Eventually I tracked the offending file/s down to this:
User > Library > Caches > com.apple.helpui > Mac Help > Contents > Resources > English.lproj > pgs > pgs.helpindex
As soon as this file is created then it all stops. Trash this file and relaunch and the homepage appears again until it appears and once again the problem reappears. This is totally repeatable for me.
Once I had isolated the problem file I tried various solutions to resolve it. The first was to replace it with the same file which is already in the System within the MacHelp.help documentation here (the system Library, not the User path)
Library > Documentation > Help > MacHelp.help
Copy MacHelp.help and then use Command + I and 'Show Package Contents' to navigate to:
MacHelp.help > Contents > Resources > English.lproj > pgs > pgs.helpindex
(right at the bottom of the pgs folder with hundreds of .html files)
I then replaced the existing pgs.helpindex with this one. It is different at it has an earlier Created date of 16/03/2005 (my vary), the one in the cache folder is Created 20/10/2005 (may vary?)
This allowed Help Viewer to launch correctly, but after a short time and re-launch it returned to the blank screen. Examining the file showed it was being overwritten by the later downloaded version, the one causing the problem. This led me to change the permissions to 'Read only' to prevent it being overwritten and after this the Help Viewer worked normally on relaunches.
I also changed and altered the permissions on the pgs/pgs2.helpindex folder in the same directory as the pgs folder as it seemed to also cause a problem.
So, finally I resolved the problem, with no error messages, the Help Viewer loading correctly and a working Help. However, I noticed that after a while the blank screen came back. Knowing the pgs.helpindex was OK it seemed likely that other .helpindex files in other Help folders created in the com.apple.helpui folder. This proved the case because, on trashing the new Help folder, it launched again. Swapping the downloaded .helpindex in say, Mail Help, and changing the permissions fixed it, until another Apple application Help folder was created and it re-occurred. The problem does not occur with all the Mac application Helps, but with some (notably for me, Mail Help, Safari Help and some others).
Finally I found that rather than digging into the apps contents I could get the same fix and also quicker Help browsing by simply creating the actual Help folders as described above and ensuring the .helpindex (or other folders/ files like idx) was not created.
From nearly two weeks trials it so far appears to completely resolve this issue.
Just be aware of any new Help folders/ files being created.
The are a few other observations:
1. I tried just altering the permissions on the actual com.apple.helpui folder to 'Read only' but whilst it allowed the Help Viewer to open fine, it broke links within the application Help windows.
2. I have not tried many Helps on other non Apple applications. I find that Toast help triggers error messages:
"2005-11-19 02:27:02.229 Help Viewer[1340] -[IdxSearchController openIndices:] caught a VTWIN exception. Bad index file is /Applications/Toast 7 Titanium/Toast Titanium.app/Contents/Resources/English.lproj/Toast Help/Toast Help idx
It is not possible to change the 'Toast Help idx' as it is an exec file. The errors do not seem to break Help Viewer. I had similar error messages from Quicktime Help when it loaded. I suspect that the Toast help is broken for similar reasons as mac Help b (it works for links to installed pages but not external ones). But it could be from the alterations to the Help folders. Either way at least Help works.
3. It is possible to get most .helpindex files from the relevant application contents but just using the Help folders is a quicker solution.
4. I can't help feel that the difference between those that have or do not have these issues is a slower connection, i.e. non-broadband. I have a 64k ISDN connection through a router which is pretty much 'always on' with solid 7KB speeds, but it seems this is insufficient for Help to work properly. I read elsewhere that connection speed appears to be an issue and Help is sensitive to this. It would be interesting to know what type of connection people with the issue have. I also have a hardware firewall in the router which may be a factor but it does not stop any other normal traffic and allows the files through anyhow. It has been in place for 6 years and with no issues. Just wanted to note it.
5. Certainly for my situation, it appears that the files being downloaded from the Apple help servers are actually causing the problem at my end. I can't explain why or how other than the tests explained above are repeatable and that using the same file but from the System file resolves the problem. It remains unclear why a slower connection would lead to files downloading which affect some people but not others? It may be something totally different of course but the error messages in Console do seem to point towards this.
6. I imagine the reason why the files and folders are downloaded are to ensure that they are kept up to date, as the pgs.helpindex for instance is a later creation date. However I do not seem to have any problems browsing or looking at topics, especially with the 'Include product Support Searches' option selected in the Help View menu. It means that there is extra traffic but gives a wider range of responses from Apple. Perhaps it is better to deselect this option if you have a slow dialup connection?
Summary
I hope that this solution can help others with this issue and perhaps other related problems. There is no way of me testing it further and I do not know how others who seemingly do not have a problem can check this. I just know it resolved it for me. I am no expert but a long time Mac user who is used to simple and elegant functionality, not the ongoing saga of the current Help, and wanted the thing just to 'work'.
Good luck
Simon

Help on Lookup command

Hello,
I'm trying to use the lookup to copy a value from an application to another.
The source application has a dimension more than the destination application, the "Client" dimension.
Can someone explain me how it works exactly? I have tried several things but I can't manage to copy the value in the destination application.
The code I have written is:
*LOOKUP SALES
*DIM Category = "BUDGET"
*DIM LACC:Account = "SalesUnits"
*DIM MEASURES= "Periodic"
*DIM Client= "ALL"
*DIM Product = %SET%
*DIM Entity = %SET%
*ENDLOOKUP
*WHEN CATEGORY
*IS BUDGET
*REC(EXPRESSION = LOOKUP(LACC), Account = "SalesUnits" )
*ENDWHEN
*COMMIT
One additional question, can I skip the when/endwhen command and use only the REC command?
Thanks in advance and best regards,
Ana

Ana,
Couple of things...
Once you validate and save your logic , A debugvalidation.log gets created in the privatepublication folder of your APPlication under your username...which has the required SQL generated from your CODE.....This code can be directly used in your SQL server management studio to see the fruits of your code....
this would give you a fair bit of idea where things are getting messed up....
On your second question: NO, you cannot skip the WHen /ENDWHEN and use only REC.
REC only works when used between WHEN/ ENDWHEN.
ON copying data..couple of other suggestions...
Have you tried SELECT option to bring in the value from the source App to the DEstination APP.?
Have you tried DM option to copy the same data?
For further information on these two options you can eiither search SDN or Administration Help in your BPC installation.
hope this helps....

Email on Training and Event Management

Dear all,
I would like to know are there any email supported in Training and Event Management Module.
For example, after HR administrator help book courses for staff, system will trigger an email notification to staff mailbox with certain course detail information
Regards
Bill

Hi Bill,
In your case the event for triggering the email notifications will be when the booking is done. So before booking, for the object like Business event type and/or business event group some relationship exits. Once you do a booking of course, additional relationship will be created in different objects. Not exactly sure about the relationship code, but you can easily find out from hrp1001.
So yoor program will check for this partcular relationship, and if it exists then will send mail notifications.
Thanks!
Regards,
Chetan Shriraj Wahane

Migrate from sharepont 2010/ SQL Server 2008 R2 to Sharepoint foundation 2013 / SQL Server 2008 R2 SP1 single server

Whenever I upgrade database from sharepoint foundation 2010 to 2013 using powershell ( stsadm.exe -o addcontentdb -url http://.....) I get this error when i try to navigate in Sharepoint Central administration
Help (new window) Go back to site Error Error
core.js
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 194f2b9c-628b-a018-f40a-c1b1772f2763
Date and Time: 7/3/2013 12:22:50 AM
Go back to site Go back to site
ULS viewer from log shows
System.ArgumentException: core.js
at Microsoft.SharePoint.WebControls.ScriptLink.AssertLocalizableCompatibility(String strFile, Boolean localizable)
at ASP._admin_admin_master.__BuildControl__control15()
at ASP._admin_admin_master.__BuildControl__control2()
at ASP._admin_admin_master.__BuildControlSPHtmlTag()
at ASP._admin_admin_master.__BuildControlTree(_admin_admin_master __ctrl)
at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
at System.Web.UI.Page.ApplyMasterPage()
at System.Web.UI.Page.PerformPreInit()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Any help would be appreciated

I have got the same error when using 2010 compatibility mode in my application when displaying a page. Following are error logs I got.
Area : SharePoint Foundation
Category : Web Controls
Level : High
EventID : aikzh
Message : core.js is should be localized in o14, call with attribute
Localizable = "true".
Area : SharePoint Foundation
Category : General
Level : Medium
EventID : 8nca
Message : Application error when access /_layouts/SP_CMN_Message.aspx,
Error=core.js at Microsoft.SharePoint.WebControls.ScriptLink.Asser
tLocalizableCompatibility(String strFile, Boolean localizable)
at ASP._layouts_15_simplev4_master.__BuildControl__control11()
at ASP._layouts_15_simplev4_master.__BuildControl__control3()
at ASP._layouts_15_simplev4_master.__BuildControl__control2()
at ASP._layouts_15_simplev4_master.__BuildControlTree(_layouts_15_si
mplev4_master __ctrl) at
System.Web.UI.MasterPage.CreateMaster(TemplateControl owner,
HttpContext context, VirtualPath masterPageFile, IDictionary
contentTemplateCollection) at
System.Web.UI.Page.ApplyMasterPage() at
System.Web.UI.Page.PerformPreInit() at
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBe...
Area : SharePoint Foundation
Category : Runtime
Level : Unexpected
EventID : tkau
Message : System.ArgumentException: core.js at Microsoft.SharePoint.WebCont
rols.ScriptLink.AssertLocalizableCompatibility(String strFile,
Boolean localizable) at
ASP._layouts_15_simplev4_master.__BuildControl__control11() at
ASP._layouts_15_simplev4_master.__BuildControl__control3() at
ASP._layouts_15_simplev4_master.__BuildControl__control2() at AS
P._layouts_15_simplev4_master.__BuildControlTree(_layouts_15_simplev
4_master __ctrl) at
System.Web.UI.MasterPage.CreateMaster(TemplateControl owner,
HttpContext context, VirtualPath masterPageFile, IDictionary
contentTemplateCollection) at
System.Web.UI.Page.ApplyMasterPage() at
System.Web.UI.Page.PerformPreInit() at
System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAs...
Area : SharePoint Foundation
Category : General
Level : High
EventID : ajlz0
Message : Getting Error Message for Exception
System.Web.HttpUnhandledException (0x80004005): Exception of type
'System.Web.HttpUnhandledException' was thrown. --->
System.ArgumentException: core.js at Microsoft.SharePoint.WebCon
trols.ScriptLink.AssertLocalizableCompatibility(String strFile,
Boolean localizable) at
ASP._layouts_15_simplev4_master.__BuildControl__control11() at
ASP._layouts_15_simplev4_master.__BuildControl__control3() at
ASP._layouts_15_simplev4_master.__BuildControl__control2() at AS
P._layouts_15_simplev4_master.__BuildControlTree(_layouts_15_simplev
4_master __ctrl) at
System.Web.UI.MasterPage.CreateMaster(TemplateControl owner,
HttpContext context, VirtualPath masterPageFile, IDictionary
contentTemplateCollection) at
System.Web.UI.Page.ApplyMasterPage()...
Area : SharePoint Foundation
Category : General
Level : Monitorable
EventID : aat87
Message : An unexpected error has occurred.
The error appeared while Applying Master Page..
I have managed to fix that removing "15" from MasterPageFile="~/_layouts/15/simple.master", so the path is
MasterPageFile="~/_layouts/simple.master".
Otherwise, it could be fixed changing attribute "Localizable" to true in <SharePoint:ScriptLink language="javascript" name="core.js" OnDemand="true" EnableCustomActions="false" Localizable="false"
runat="server" /> in simplev4.master MasterPage, however this way is not desirable.
hope that could help..

XML Publisher Information

Hi,
I am a oracle technical. I have worked on forms , reports, discoverer, interfaces, apis etc. I am have following question regarding XML publisher.
1. What is XML publisher. Administration and Desktop are what. what we can do with each of these two tools.
2. Can we say XML administration is like Discoverer administration, and desktop is like discoverer desktop.
3. where these templates places role.
4. i have seen in R12 there is XML output. How to generated XML output from the concurrent program output.
5. how can i develop a XML report from starting, template development.
6. can any one tells the flow of the XML report output, which tool places what role....
7. Any training material availble giving same apart from Oracle sites information (this site confuses alot.)
In discoverer, first we carete a business area and create custom folder and write the custom sql. then go to desktop edition and create a worksheet and run the report from applications.
Can any one tells me how this create of process exists in the XML reports case.
Regards/Prasanth

Hi Prasanth,
I am trying to answer some of your queries with respect to Oracle Applications.
1. What is XML publisher. Administration and Desktop are what. what we can do with each of these two tools.XML Publisher administrator helps you in defining a XML data definition and its related templates. The data definition links the concurrent program to a template (which can be a RTF or a PDF document.). These tools are very much helpful in producing reports in multiple formats with ease. These tools seperates logic of a report from their layout.
2. Can we say XML administration is like Discoverer administration, and desktop is like discoverer desktop.In a sense they are similar, unlike discoverer desktop the XML publisher desktop allows you to create your own layout (template). In oracle applications concurrent programs can be used to create the XML output. Oracle apps provides a seeded responsibility called "XML Publisher Administrator" for creating data definition and templates.
3. where these templates places role.Templates are used to define layout. Just like the layout in oracle reports, these templates can be created in word or PDF which gives more flexibility and convenience in formatting the output.
4. i have seen in R12 there is XML output. How to generated XML output from the concurrent program output.When you define a concurrent program, you can specify the output format as XML to generate XML output. Remember the output of the program must produce a XML. Oracle reports can generate XML output Or you can generate from a PL/SQL procedure.
5. how can i develop a XML report from starting, template development.Simplest way of doing this is to create a report with no layout (just create the query and group it the way you need). Define a concurrent request with output of XML, Go to XML Publisher Administrator and create a data definition. Create a template for the data definition. Make sure the concurrent program short name is the code for data definition. Thats it.
6. can any one tells the flow of the XML report output, which tool places what role....I believe the above explanation is the best answer for this query.
Hope this helps you in a basic overview of XML publisher.
Regards
Venkat

In mail, how do I print the list of Previous Recipients?

I'm using mail in 10.5.4. It works fine for me, including the capability of suggesting email addresses from the Previous Recipients list. But, of course, this runs only on my eMac at home.
I plan to be away for 3 weeks, and will be using email on various folks' computers, by contacting my email server directly (verizon.net). But my email server does not have my Previous Recipients list.
How can I print the Previous Recipients list?
In the Previous Recipients window, I find that I can select a single email address with a mouse click, and select all the recipients (command-a), but the copy command (command-c) does not work.
I've also tried to look at the file:
~/Library/Application Support/AddressBookApplication Support/AddressBook/MailRecents-v4.abcdmr,
but it is not in a readily viewable text format. The Unix "file" command describes it as an "SQLite database (Version 3)."
Does anyone know how to print a copy of the Previous Recipients, to take with me on vacation?
Thanks

This turns out to be more complicated than I had hoped, but it is possible.
The Apple mail program uses a database program available in Unix called “sqlite3.”
The executable is in /usr/bin.
For information about this program, type “man sqlite3” in a terminal window. Also, there is information on the web, at www.sqlite.org.
A friend whose day job is in database administration helped me work this out.
First, go the proper directory in a terminal window:
cd ~/Library/Application Support/AddressBook
The file of interest is MailRecents-v4abcdmr.
Note that the “file” command describes this as:
file MailRecents-v4abcdmr
MailRecents-v4.abcdmr: SQLite database (Version 3)
sqlite3 MailRecents-v4.abcdmr
SQLite version 3.4.0
Enter ".help" for instructions
sqlite>
Let’s see the headers:
sqlite> .headers ON
Now, let’s get some information about what’s in this database file:
sqlite> select * from SQLITE_MASTER; /* don’t forget the semicolon */
/* lots of output */
The table ZABCDMAILRECENT is of interest to us. Note that the last 3 columns are called ZLASTNAME, ZFIRSTNAME, and ZEMAIL. We want these from the table, in columns, in filename.txt.
sqlite> .mode columns ZABCDMAILRECENT
sqlite> .width 15 15 36 /* make sure the columns are wide enough */
sqlite> .output filename.txt /* note: no ‘;’ */
sqlite:> select ZLASTNAME, ZFIRSTNAME, ZEMAIL from ZABCDMAILRECENT;
sqlite> .exit
Done. The email names and addresses are now in filename.txt, one per line.
Maybe, someday, someone at Apple will add this capability to mail.

No Administrator! Help!

Similar Messages

Maybe you are looking for