No Airport Access and No Keychain Prompt After Upgrades

I have recently experienced instances where I updated software, e.g., the recent Security Update and a recent Quicktime update. Upon rebooting, the Airport "fan" in the menu bar shows no signal, and I cannot access my Airport network. I have rescanned using the Airport Admin Utility, but it does not recognize the base station.
In the past, after about three hours, I finally get the prompt advising me that Airport needs to access my keychain, and when I authorize it to do so, all is fine. (I am hoping that happens again in a few hours.)
This has happened on both my iMac and my iBook (both running OS 10.3.9). Has anyone else experienced this? Does anyone have any insights about this problem?

I am having a related problem; I intend to post here and in Panther Networking under the "Security Update" problem thread.
I have Panther 10.3.9 on a iMac G5. It is connected to the network via Airport through a Belkin router (connected to a cable modem) using 128-bit WEP. I have 5 users on the computer (one for each family member.) On Friday I Software Updated Security Update 2005-008. Since then, everytime anyone switches to a different user, Airport drops the connection to the router and takes the computer off the network.
I have now logged into each account, connected to the router each time and typed in the 128bit hex password saving to each person's keychain. Now, when people switch to a new user, it still drops the connection but they can point-click re-connect without having to enter the password.
Resetting the Keychain using Keychain First Aid didn't do anything for me but lose the password. I don't see why I should even consider flashing the pram. I am hoping Apple fixes their bug.
---Cris

Similar Messages

  • I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

    I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

    What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
    Tell us what network setup you are using..
    If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

  • I get a black and white logo and a progress bar after upgrade ipad2 5.01

    i get a black and white logo and a progress bar after upgrade ipad2 5.01

    See this page : http://support.apple.com/kb/HT4097 - it covers :
    iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.

  • Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

    Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

    I've installed Lion over Snow Leopard and all my non Apple software is still here - you may want to check if your software will work with Lion and I would definately recommend having a bootable backup in case anything goes wrong
    Regards,
    Colin R.

  • HT4946 hii, on my iphone 4s, i tried upgrading my OS and i was asked if i needed back up and i said yes, after upgrading i couldnt find any of my files, document, pictures, music and all. please i need help please.

    hii, on my iphone 4s, i tried upgrading my OS and i was asked if i needed back up and i said yes, after upgrading i couldnt find any of my files, document, pictures, music and all. please i need help please.

    Hi,
    usually when you upgrade, it should not delete your files, but if it happens, than you should have a backup.
    Unfortunately it is very common, that people don't know, what exactly is in the backup.
    The question is, what files exactly you are missing? Own pictures, or taken with the device? Purchased music form the iTunes Store, or own? ....
    Documents and files are mostly up to the developer of the app, if they are part of the backup, usually not and you need to transfer them before.
    In the backup you will find just pictures from the Camera Rolle folder, everything else you should have on the PC, if you had it on the device.
    Same then for music, you can transfer purchased music from the device, but your own works just one direction, from PC to device, from device to PC it doesn't work.
    In future I recomand you to be sure how the backup works or use a 3rd party app (iExplorer) where you have a little bit more "freedome" than with iTunes.
    Or you maybe just restored from the worng backup

  • My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?

    My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?

    check and make sure that an alert style has been choosen for certain alerts, and make sure you check your sounds in settings

  • Airport Utility and System Keychain Problem

    I'm having a strange issue when trying to access Airport Utility on our imac. When I click on manual update I get a popup box asking for the administrator user name and pass word because Mac OS X wants to use System keychain. When I type those in the boxes and click allow an error message appears saying I typed an invalid password. I've rebooted, I booted up in Safe Mode which asks you for a password before it logs in - no problems there. I didn't try to access AU from there, not sure if that's possible. I've even gone to account settings and changed the password which requires you to enter the current password, that worked. I used the new password with that warning from Airport Utility but got the same error. I went back and changed the password back to the original and tried again, same error.
    I don't normally access AU on that computer, I use my laptop and there are no problems there, so I don't know if this is a problem that just cropped up under SL or not. So far that's the only instance of this popping up with that issue. I don't believe I've ever seen it say it needed to access the System keychain before. Another oddity to this is I can open up Keychain Access and click on unlock the System keychain which then asks you for an administrator password, I enter it and it unlocks with no issue. Any help with this would be greatly appreciated.
    John

    Sometimes the Keychain just gets a bit "wonky." The simplest resolve, in most cases, is to delete all entries with the Kind of "AirPort base station password" and "AirPort network password" in the Keychain using the Keychain Access utility.

  • ISE Admin Access with AD Credentials fails after upgrade 1.2.1 to 1.3.0

    Hello,
    After upgrading ISE VM from 1.2.1 to 1.3.0.876, I can't connect on ISE with AD Credentials (Invalid Username or Password). It worked find before upgrading to 1.3.
    On another ISE VM in 1.3.0.876 version (w/o upgrade) with this kind of configuration, it's OK.
    I have double check the Post-upgrade tasks (particularly rejoining Active Directory). Everything worked find after this upgrade except the admin access with AD credentials.
    I don't use user certificate-based authentication for admin access. So I didn't execute application start ise safe CLI.
    My 802.1x wireless users passed authentication with AD credentials. So the ISE had correctly join my AD.
    I didn't find anything related to this admin access with AD credentials failure in the output of show logging application ise and show logging.
    I don't find anything related to this in bug search on Cisco tools.
    I tried to :
    - update the SID of my Admin AD Group, the result is still the same.
    - delete my admin access with AD credentials configuration then make this configuration again, but still the same error.
    Any ideas on this ? Could I find elements in another log ?
    Regards.

    Dear Markus,
    After logging as user "prdadm"
    su - prdadm
    bssltests% bash-3.00$ ls -a
    .                            .dbenv_bssltests.sh-old      .sapenv_bssltests.sh         startdb.log
    ..                           .dbenv_bssltests.sh-old10    .sapenv_bssltests.sh-new     startsap_.log
    .bash_history                .dbsrc_bssltests.csh         .sapenv_bssltests.sh-old10   startsap_DVEBMGS00.log
    .cshrc                       .dbsrc_bssltests.sh          .sapsrc_bssltests.csh        startsap_DVEBMGS01.log
    .dbenv_bssltests.csh         .login                       .sapsrc_bssltests.sh         stopdb.log
    .dbenv_bssltests.csh-new     .profile                     dev_sapstart                 stopsap_.log
    .dbenv_bssltests.csh-old     .sapenv_bssltests.csh        local.cshrc                  stopsap_DVEBMGS00.log
    .dbenv_bssltests.csh-old10   .sapenv_bssltests.csh-new    local.login                  stopsap_DVEBMGS01.log
    .dbenv_bssltests.sh          .sapenv_bssltests.csh-old    local.profile                trans.log
    .dbenv_bssltests.sh-new      .sapenv_bssltests.csh-old10  sqlnet.log
    bash-3.00$
    bash-3.00$
    I have changed envt settings in .dbenv_bssltests.csh & .dbenv_bssltests.sh
    .sapenv_bssltests.sh & .sapenv_bssltests.csh  [4 files]
    Regards,
    Ankita

  • Magic mouse and blue tooth issues after upgrading to 10.6.3

    Hi,
    After upgrading to 10.6.3 I am having the following problems on my iMac:
    1) Magic mouse randomly disconnects during a session
    2) bluetooth wakeup no longer works (but is checked in bluetooth advanced settings)
    3) After waking up the system using the kb, bluetooth is not active for almost 10 seconds.
    4) System seems quite a bit slower
    5) Airport is also slower and also takes almost 20 to 30 seconds to become active after wakeup,
    None of these issues were present on 10.6.2
    Any ideas?
    Roy....

    Try reapplying the wireless mouse 1.0 update http://support.apple.com/kb/HT3936
    http://discussions.apple.com/thread.jspa?threadID=2382651&start=83&tstart=1
    http://discussions.apple.com/thread.jspa?threadID=2382651&start=102&tstart=1

  • Ipad 2 and Iphone 4 hybernates after upgrade to IOS 6

    Hi , After upgrading my iphone 4 and Ipad 2 to IOS 6 , both devices go in "hibernate" mode after being idle for a while. The only way to open them is by hard rebooting. Have you expirienced similar problems ? Is there any solution to fix it ? BR Robert

    Andrew is partially right.  With apps that are still running, they are running regardless of being suspended or not.  A restore should be her last option. as she will lose anything added since her last back up.  And there should be NO reduction in speed as the update was made compatible with all phones included in the update. 
    I recommend the following.
    1st, delete all apps on the phone that are not being used.  They take memory and speed since almost all apps run in the background checking for notifications.
    2nd, go disable all notifications you don't need.  This will help with speed AND battery life.
    3rd, location services....  Go adjust this... if you don't NEED it on, turn it off.  It will reduce usage on the phone, and again save ALOT of battery life.
    4th, organize apps into folders.  this will ruduce "pages" on the phone, and increase speed.
    5th, clear browsing history. 
    6th, delete emails, texts, contacts that are not needed.  ESPECIALLY Spam folders!!  some of us never clear spam, and there could be a large amount.
    7th,  Do a hard restart.  While the phone is powered on, hold the home button and power button down at the same time.  Keep holding while the phone suts down and keep them held down until the Apple logo reappears. 
    If this does not help, then she needs to take a record of all contacts shes added since her last back-up, email all photos taken since her last back up, so she can save them back to the phone,(DO NOT rely on photostream, because once the restore is done, those photos will be taken from the stream.)  She will need to do the restore off her computer and the update through iTunes.

  • IPhone will not synch contacts and calendar with Outlook after upgrade to 4

    I have been using an ACT! database on a PC for years, synching to Outlook with CompanionLink, and synching my iPhone to Outlook. After upgrading my iPhone to 4.0, I can no longer synch my contacts and calendar from Outlook. It "goes through the motions," appearing to be synching. But in the end, nothing changes. I have reloaded iTunes. The problem is between Outlook and the phone (the synch from ACT! to Outlook is fine).

    I'm having the same issue. Upgraded my 3G to OS4 which wiped out my contacts from the phone. I also use CompanionLink (Express) to sync ATC with Outlook and iTunes and the phone. Have spent hours/days on the phone with second level Apple tech support to no avail. CompanionLink IS syncing with Outlook but Outlook isn't syncing with the phone. Have tried syncing to Outlook directly (without CompanionLink) but no good result. Tried syncing through MobilMe. Can sync all Outlook contacts from my computer to me.com through MobileMe but does not sync with the phone. Tech support suggested trying to sync fewer contacts at a time as their might be a problem with the contacts file. DID manage to get 4000 of my 5600 contacts back in but can't get any more in. Previously had NO problem syncin all contacts directly and through CompanionLink. VERY frustrating.
    Also, I use Outlook Express for email. Since installing MobileMe I get an error message saying that Outlook isn't my default mail handler and I need to change the settings to make it the default mail handler. I DO NOT have "sync mail" checked as I'm not trying to sync my email accounts...only contacts and calendars. Made Outlook the default mail handler which stops the error message but still can't sync the contacts and I want to keep Outlook Express for email.

  • Internet and more not working after upgrading to iOS 8

    After upgrading to IOS8 - I had multiple issues
    Network Connection is shotty and disconnects after clicking few sites
    Email gets stuck
    There is some sort of a bug(s) system is not stable.
    Safari is not working
    Apple needs an update or patch very soon.

    Sept. 22, 2014 Hello everyone finally a solution - The issue is with the 5GHZ networks.  Reset your network of your IPAD and/or IPHONE and connect to your slower 2.4GHZ network - So far issue is fixed but for gamers and serious bandwidth absorbers, it might be a disappointment with the 2.4GHZ.
    Let's face it, it's better than the sporadic network drops.
    My Movie connection was uninterrupted.

  • "manually manage music and videos" setting disabled after upgrading iTunes!

    Hello every one.
    I used to manage my musics and videos manualy , so naturally "manually manage music and videos" check box was always "cheked"
    Now after i upgrade my itunes to latest version (11.1.3.8), i find out that option is "Unchecked"!!
    So i am not able to copy any music or video or book too my iphon !
    If i try to enable that option again, it will clear my libraries and i will lose anything.
    Why this happened? what can i do ? any workaround? seems like a bug to me. i didnt do anything just updated my itunes. that option was enabled on my iphone for like 3 years! now i just upgrade my iTunes and that check box is unchecked.
    It seems stupid itunes think its another machine and says " it is synced with another library"
    Any suggestion please?

    Yea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
    I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
    Bythe way, here is how i fixed it :
    1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
    2-It showed a threating message that it will erase my music and videos ,......
    3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
    Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually.

  • Cell Definition and Reverse sign Issue after upgrade

    Hi ,
    we are having a issue here after upgrade to BI 7 from 3.1c .
    There is a Collision between Cell Definition and Reverse sign in the query designer.
    Issue is . We have Key Figure "Net Days AR" which has Reverse Sign Checked under properties. In 3.1c when we ran the report the Net Days AR would get value like  for example    -40 . but now after upgrade to BI 7 SP 16 we are getting value 40. the negative sign is missing. The formula is correct.
    I went and checkd if we have any cell definitions defined on this and found the cell definitions onthis keyfigure.
    values are comming correct if there are  no cell definitions.
    Thanks in Advance and Points will be awarded.
    Thanks,
    Reddy

    we have the same problem. In BI 2004s with BEx 3.x when the cell reference is defined, the reverse sign flag is ignored.
    I opened a message to SAP. Until now no solution and I think we'll never receive solution. Here are the answers we received:
    SAP
    I have to say this is the limitation of front end 3.5.
    In designer 3.5, it works this way:
    When you define a cell referance, this cell is blocked from change of the column property change. No matter how you change the column key fig proerty, it keeps the original status when you define it.
    If you want the defined cell property, you need to delete the cell
    referance, change property, then redefine the referance.
    I agree this is very inconvinience, that's why I would recommend you to use query designer 7.0 if possible. With 7.0 front end, you can define separately the property for defined cells. It is more flexible.
    ME
    At the moment it is not possible to migrate to 7.0 frontend.
    I tried to delete the cell reference, change properties and redefine the reference. I tried to create new columns, define cell properties, save and define the cell reference. I tried several different combinations...
    No way, as soon as I define the cell reference, column properties are ignored.
    1) How can we restore the correct behavour of a query in frontend 3.5?
    2) If we found a way to restore it, we need a smart procedure to modify all our existing queries (including how to identify those affected by this inconvenience).
    SAP
    For front end 3.5, you need do following:
    1. delete cell referance
    2. change the column property (such as tick on or off the sign reversal)
    3. re-define the cell (this cell will with the new sign status)
    4. define formular base on cell
    After step 3, you can't change cell property whatever you do in
    column property. This is the designed behavior.
    If you want to change property after step 3, you need to start
    all over from step 1.
    ME
    I did it.
    Don't work. When I define the cell reference, column properties are ignored.
    SAP
    It seems there is some issue in front end.
    Do you use the front end 3.5 with latest patch?
    Could you please check front end installation as per sapbexc.xla (described in note 197460). If there are problems shown within this check do the following:
    - Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -'REMOVE SAP FRONTEND'
    - Install the lastest frontend and GUI patch (according to note 496977or 496989 again and check the installation).
    ME
    I don't think so. I am using:
    Sapgui 7.10 Patch 8
    Bex 3.50 Patch 3
    Bex 7.x Patch 5
    to be continued...

  • Anyone else having volume icon on ipod touch 4gen just popping up and not working properly after upgrading to ios 6.1?

    Hi, has anyone experienced issues with there volume control icon randomly popping up after upgrading to ios 6.1 from 6.0 .
    I have a 4th gen ipod touch which  until upgrading to 6.1 from 6.0 was working perfectly.
    Minutes after the upgrade I noticed the volume icon just popping up for no reason. I can turn the volume up now, but not down and it randomly appears on screen without anyone touching it. Weird!  Can someone shed some light on this issue,I have reset and reloaded to factory several times now to no avail.
    thanks!

    I am having this same issue on my iPhone 4. The most recent update to iOS 6.1 didn't fix it either. Has anyone found a fix for this problem? It doesn't happen often, maybe every third day or so but requires power off, power on to bring the sound back. 

Maybe you are looking for