Airport Utility and System Keychain Problem

I'm having a strange issue when trying to access Airport Utility on our imac. When I click on manual update I get a popup box asking for the administrator user name and pass word because Mac OS X wants to use System keychain. When I type those in the boxes and click allow an error message appears saying I typed an invalid password. I've rebooted, I booted up in Safe Mode which asks you for a password before it logs in - no problems there. I didn't try to access AU from there, not sure if that's possible. I've even gone to account settings and changed the password which requires you to enter the current password, that worked. I used the new password with that warning from Airport Utility but got the same error. I went back and changed the password back to the original and tried again, same error.
I don't normally access AU on that computer, I use my laptop and there are no problems there, so I don't know if this is a problem that just cropped up under SL or not. So far that's the only instance of this popping up with that issue. I don't believe I've ever seen it say it needed to access the System keychain before. Another oddity to this is I can open up Keychain Access and click on unlock the System keychain which then asks you for an administrator password, I enter it and it unlocks with no issue. Any help with this would be greatly appreciated.
John

Sometimes the Keychain just gets a bit "wonky." The simplest resolve, in most cases, is to delete all entries with the Kind of "AirPort base station password" and "AirPort network password" in the Keychain using the Keychain Access utility.

Similar Messages

Airport password created in login and system keychain both..

Hey,
I've been having a few vexing problems with my new MacBook 2.16 running 10.4.6 that I was hoping that I might get solved on here. I've been unable to get my machine to use the airport password in the system.keychain. If it's not in the login.keychain, it doesn't work. I've tried deleting and re-creating the keychain using systemkeychain -vfCt and it still doesn't work. Anybody have any ideas? I'm downloading the Combo 10.4.6 updater to see if that corrects the problem. I've already tried to repair permissions.
If I elect to save the password to an airport network, it is saved in both the login and system keychain and I'm not sure if this is the correct behavior.

I've applied the 10.4.6 Combo updater, no affect upon the problems that I've been having with airport. It just won't seem to use a password stored in the system.keychain for some reason.

Printer problem with Airport Utility and Epson CX5500

Hi,
I recently bought an iMac '24 2.66 Computer and was able to set up my internet through an airport. When it came to hooking up a wireless Epson CX5500 printer, the airport recognized it, but when it came to print in the printing queue it simply wont print. I was able to find a very helpful post that would possibly be my next step in fixing it (probably just a program error or hook up)
Here is that post:
ideapod
*Posts: 5*
*Registered: Jul 16, 2007*
*Re: Problem connecting a Epson USB Printer*
*Posted: Sep 29, 2008 5:42 AM in response to: tonys28661 *
+Hi there,+
+I had the same problem, but with an Epson CX5500.+
+Firstly, BTW - I found out there IS a list of supported printers: http://support.apple.com/kb/HT1370?viewlocale=en_US. Before you scream - "that's leopard you idiot"; in the table, if the printer is listed with a MODERN driver, then it will work with Airport Base Station - eg TimeCapsule.+
+Next. My problem was solved by deleting the spaces put into the printer name by timecapsule. When the printer is recognised it was called "Epson CX 5500". My Macbook printer service then set up a Queue which was mdns://...Epson%20CX%205500... Note - substitution of %20 for space in the name. I removed the spaces from the name via airport utility, manual set up, printers. Now the macbook could print to it.+
Cheers,
Mark
The problem that i have is the step by step process of altering this or finding it. As i made the name of the shared printer EPSONStylusCX5500 but could not acess the printer name one to change it. The url link still shows the 20%. If someone could please take the time to explain on how to do it, then maybe just maybe, i would be able to print wirelessly. Any other ideas or even cheap printers that would work without a problem as i would simply go out and buy one instead. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Time Capsule Connectivity Problem with Airport Utility and Mavericks

I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

My Windows XP AirPort util and Bonjour can't find any wireless device

I have both macbook and a PC laptop.
I just started using my TimeCapsula and all features (Internet gateway, access to the USB printer and the external harddisk) are visible and working fine when using my macbook.
My PC wireless card seems to be working fine too and I can access the Internet using the Airport gateway.
My problem is that Airport Util and Bonjour on my PC "can't find any wireless devices" (even though It is clearly working fine) and therefore don't detect/mount the external drive or the Printer.
Thanks!

How do your Extreme and Express connect to one another? Wired Ethernet between the two, or wirelessly?
Try unplugging the Express. Does that change anything?
Wireless interference could cause the symptoms you're describing. Even though you did nothing to your wireless network, the presence of other wireless networks or introduction of nearby devices will bring interference where there was none before.
AirPort and Bluetooth: Potential sources of interference for wireless devices and networks
Try changing wireless channels; use "automatic" unless you have reason to use a specified channel. Try checking "interference robustness". Altering these settings may help, but they could make things worse.
If you are unable to configure a device over Airport, or changing a setting leaves you unable to configure it wirelessly, connect its Ethernet port to your computer's Ethernet port and Airport Utility should find it.
As a last resort, try a "hard reset" followed by re-configuring the Extreme, Express, or both. Start by removing your Express from the network. Re-configure the Extreme and see if that fixes things. If it does, add the Express to your network and re-configure it as well.
AirPort troubleshooting guide
I open airport utility ... can not locate any of my wireless devises, airport extreme base,, airport express, apple tv, wifi printer.
AirPort Utility will only detect Apple AirPort base stations (Extreme, Express, Time Capsule) for purposes of configuring them. It is not designed to detect or configure other wireless devices like your printer.

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

HT201250 What is Airport Utility and why do I need to access this in order to backup my iMac using Time Machine...PLEASE??

What is Airport Utility and why do I need to access Airport witeless devices in order to backup my iMac using Time Machine...HELP!!! PLEASE??

AirPort Utility is required to configure an Apple AirPort Base Station or Time Capsule.
Time Machine can use a Time Capsule or a locally connected volume. You only need to use AirPort Utility if you are using a Time Capsule.

Trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location.

I upgraded to Mavericks and now some of my utilities --- such as disk utility and system information no longer work.

I upgraded to Mavericks and now some of my utilities --- such as disk utility and system information no longer work. I find Disk Utility useful and would like to have it. Doesn't Makericks include

Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
If that doesn't work, I'd reinstall Mavericks over your current installation.

Disk Utility and repair permissions problem after upgrade 10.5.1

*Problem with Disk Utility* - +repair permissions don't work anymore+
After upgrading to OS X 10.5.1 tried to correct permissions with Disk utility. But I'm not able to repair permissions, because I get this message every time "fault: The underlying task reported a fault at concluding." and permissions repair stops. Has anyone else had this problem and does anyone have any idea how to get this working again?

Will try installing OS X 10.5.1 again from the downkoad that you recommended. Won't be able to do this untill after the New Year but I'll let you know if this helped. I had another problem after he 10.5.1 upgrade and that was that the Security update 2007-009 also refused to install. Could this be related too the problems with Disk utility and the permissions problems.

Time Machine, AirPort Utility, and Time Capsule broken in Mavericks?

Hi all, I’ve got a befuddling Time Machine/Time Capsule/Airport problem that I can’t seem to sort out.
On my pristine 2-day-old iMac (late 2013, running 10.9.1), I’m trying to set up Time Machine to back up to a new-ish 3TB Time Capsule. Initially it worked fine for the first backup, but subsequent backups failed because “backup disk could not be found.”
So I tried giving the TC a shorter name. The first backup under the new name worked a treat, but subsequent backups failed.
In Time Machine system pref pane, I deleted the Time Capsule, intending to try again with a new, even shorter name. But then when I went into AirPort Utility to change the Time Capsule name, it told me that “no configured AirPort base stations have been found.” I assumed that I was just deleting it as a choice on the backup disk list, but now I'm wondering, did the Time Machine pref actually delete the actual disk? In the AirPort Utility window, Time Capsule appears in the "other wi-fi" devices list, yet when I click it, it says "error reading settings."
Here are some other random details that may or may not pertain:
On the new iMac, I tried to mount the TC disk image, but Connect To Server reports that the connection fails because “the server may not exist or is unavailable.”
Although the Time Capsule shows up in the sidebar of the Finder window, “getting info” just produces the spinning wheel.
Although AirPort utility says that it can’t find the Time Capsule, the TC is nevertheless connecting to the internet just fine. All household devices are online, including iPhones and iPads.
On the old Mac Pro running 10.8, Time Capsule, Time Machine, and AirPort Utility all behave normally.
I thought I might try resetting the Time Capsule, but will this erase all the backups (from other computers around the house all running 10.8x without problems of any kind) that are on there? The other computer users will definitely squawk about that!
I hope this tirade makes some sense. Thanks for reading!

1. In Time Machine system pref pane, I deleted the Time Capsule, intending to try again with a new, even shorter name. But then when I went into AirPort Utility to change the Time Capsule name, it told me that “no configured AirPort base stations have been found.” I assumed that I was just deleting it as a choice on the backup disk list, but now I'm wondering, did the Time Machine pref actually delete the actual disk? In the AirPort Utility window, Time Capsule appears in the "other wi-fi" devices list, yet when I click it, it says "error reading settings."
Here are some other random details that may or may not pertain:
2. On the new iMac, I tried to mount the TC disk image, but Connect To Server reports that the connection fails because “the server may not exist or is unavailable.”
3. Although the Time Capsule shows up in the sidebar of the Finder window, “getting info” just produces the spinning wheel.
4. Although AirPort utility says that it can’t find the Time Capsule, the TC is nevertheless connecting to the internet just fine. All household devices are online, including iPhones and iPads.
5. On the old Mac Pro running 10.8, Time Capsule, Time Machine, and AirPort Utility all behave normally.
6. I thought I might try resetting the Time Capsule, but will this erase all the backups (from other computers around the house all running 10.8x without problems of any kind) that are on there? The other computer users will definitely squawk about that!
I hope this tirade makes some sense. Thanks for reading!
Rather than chop up your post I have taken the liberty to number the points.
1. When you deleted the TC in the airport utility you simply changed its ability to display the errant device. You did not actually delete anything on the TC itself.
Getting back a lost Airport.. more below.
2. Please give actual command you used.. and the name..
It is most important that you translate the name from Apple name to actual network name. That is why I constantly hammer on about using network names.. short, no spaces and pure alphanumeric.
So Fred Blog's Airport Time Capsule apart from being hopelessly wrong.
Is translated by Apple to the Network name.. Fred-Blogs-Airport-Time-Capsule (note.. no spaces and no special characters.. the apostrophe is deleted).
It can be much easier to just use IP address.. if the TC is the main router.. then it will hold a constant IP.. by default 10.0.1.1
So mount the TC as AFP://10.0.1.1
3. That is standard.. it is a network device and will not show info. Same on any computer in your network.. same on any OS.
4. Yes, that is standard.. the location of the hard disk is lost.. but the internet is still working.. This is the bug that has been around since Lion and is still growing worse with each revision.
5. Again standard. the issue is on the computer or the interaction of the two.. computer and TC.. yet other computers are unaffected.
6. Reset of the TC is fine.. no reset, soft hard or factory will ever delete the hard disk files.
But if you change the name of the TC, you will need to go around to all the computers and setup TM again to point to the right target.. none of the backups are lost.. you just need to tell TM where they got to.
Manual setup of the lost TC.
In Airport utility go to the top menu, open configure other.. and type in the IP address of the TC that got lost.
no password needed unless you set something .. if it doesn't work the default is public

Airport Extreme and Time Capsule problems

I have had an Airport Extreme 802.11g, version 5.7 for several years and have some problems that is get stuck now and then, so I have to restart it. I have tried to upgrade software, but cannot find anything appropriate. Assume 7.5 is a software version, but where and how to upgrade?
I got another problem when I bought a Time Capsule. It interferes with my Siemens Gigaset wireless phone. I have tried to change channel etc, but it does not seem to help. Any tips?
The two problems are not related, as I had the first problem before I got the Time Capsule.
Tor

v5.7 is the latest firmware for your AEB 802.11g.
v7.3.2 is the latest firmware for the TC.
You should probably do these simple maintenance tasks:
Simple Maintenance Tasks:
1. Repair Permissions - /Applications/Utilities/Disk Utility.app. Start Disk Utility, select your HD and click on Repair Permissions. When finished, quit Disk Utility and then restart your computer.
2. Reset PRAM - hold down Option-Command-P-R keys when starting until you hear the startup chime a 2nd time.
3. Safe Mode Startup - hold down the Shift-key at startup until you see the login screen. When logged-in, then go to System Preferences/Network/AirPort
- click on the 'Network Name:' roll-button, select 'Join Other Network...', enter 'Network Name and select the security type you are using, and finally, enter your Password and click 'Join'.
- click on 'Advanced', TCP/IP and confirm that 'Configure IPv4:' is set to 'Using DHCP', click 'OK'.
- click the 'Apply' button and exit System Preferences.
Make sure you separate the AirPort Base Station and the wireless phone by as large a distance as you can.
You could enact Interference Robustness, but it will reduce the range of your AirPort base station:
1. Open AirPort Utility, select the AirPort Base Station (main) and click on 'Manual Setup'.
2. Click on 'Wireless' tab and click 'Wireless Options'.
3. Tick 'Use interference robustness, click 'Done', and click 'Update'.
4. Wait for ABS to restart. Restart your computer and test.

System keychain problem (2 system keychains)

This issue is not new but I have seen no resolution.
I have a wifi with a password. I can use the wifi but can't remember the security password that I created for it. I went to Keychain Access to see it, and found the wifi listed in the "System" keychain. There are two "System" keychains, with identical contents, which seems odd. When I open the wifi item in the "System" keychain and click on "show password" it asks me for the "keychain password" which it then does not accept. The "keychain password" (or what I set up as the "keychain password") works on the "login" keychain and also an auxiliary keychain I created to store other passwords--there is no problem in revealing the information for these logins/passwords, using my usual passwords--the only problem is on the "System" keychain. My login password for my account is different from my keychain password, but this has not previously caused a problem. How can I get to this wifi password? What is going on with the System keychain, which seems to have created for itself a new, unknown password? Thanks.

OK, figured it out. My wife and I have had the same passwords since we turned on the computer, BUT, I had originally been the admin. A while back, for security, we decided to create a separate account for the admin, (with a new password, obviously), and remove admin privileges for my account.
So, just now, I logged into the admin account and opened keychain access, and there was the wifi device right on the top of the list, no "system" keychain present. I clicked on the "show password" box on the wifi item and the password was revealed. No "keychain password" or any other password requested. Very odd, and still no idea why the "system" keychain is so crazy or why there are two of them, but I'll take it. Thanks for your responses and ideas.

Multiple "login" and "System" keychains

My menu bar lock icon shows two entries for keychain "login". There are also 2 entries for "login" in Keychain access. This is also true for my "System" keychain. They can be both locked, both unlocked or one of each. If I delete the extra one, they both get deleted. There are still two "login" keychains in the list, but the lock icon is gone and an empty square is shown instead (for both of them). There is only one login.keychain in my ~/Library/Keychains and only one System.keychain in /Library/Keychains. This all applies to my Power Book. On my iMAC, keychain access shows 2 "System" keychains but only one "login". What are these extra keychains and how do I get rid of them. It's not really a problem (everything works like I think it's supposed to), it's more of a nuisance and a puzzle that I really want to solve.

Hi Zaheer,
Thanq for reply,
SM04 we can find no.sessions and terminals , but i am looking for mutiple logons login and logout timings.
Thanks,
sksk.

Airport extreme does not appear in airport utility and will not reset

Hi,
Here's the problem: My base station wasn't letting me reconfigure its settings via ethernet or airport. I unplugged all cables and performed a hard reset. Now, it will not appear in airport utility either on ethernet or wireless, and it will not revert to the factory 'Apple Network #######' broadcast. It is still showing the name of the previous network in my computer's airport settings. Also, running iStumbler, it too does not see a new network.
Question: Is it fried? If not, what should I do?
Thanks.

I'm may be having the same problem:
Airport Utility doesn't find the base station, despite being connected with ethernet and even now while I'm actually connected to the internet through it via Airport. In my first experience, I reset the base station, and then it did show up, though, as you said, not reset to factory defaults. On another occasion, it wasn't showing up again, but did the next morning when I sat down. Weird. This is on an Alum. PB 15" running Tiger (10.4.11). I also just got an Oct 08 MBPro with 10.5.5 and it's copy of Airport Utility is finding the base station right now while this machine is not. Is this some kind of bug? Both copies of Airport Utility are 5.3.2 (532.8)

Airport Utility and System Keychain Problem

Similar Messages

Maybe you are looking for