No Authentication required, if the req. from IIS

Hello,
I'm using third party authentication tool and it requires, IIS to run as
webserver. So I use IIS +WL6.1.
The authentication will be done, before the request is forwarded to WL.
So I don't want WL to pop-up a login dialog box, when I'm using IIS+WL. But in
my web.xml, I use security-constraint to protect my resource, if I'm using just
WL6.1. How can I tell WL that if the request is from IIS, then don't pop-up the
login box (Basic authentication) and use it only when I'm using just WL.
thanks for your time & help.
Vijay

Hi Utpal,
Thanks. But I've certain concerns.
If the IIS & WL are running in the same box, then I can check with port # &
ip address in combn. But still, I don't want to hardcode the ip address, so I'm
thinking, I can make it as a configurable. In this case, it will be easy to break.
If the administrator,set the port # of WL in the configuration as the port where
IIS runs (either by mistake or intentionally), then in my connection filter, if
I check for this port, it will be ok and let in (which it shouldn't be).
Thanks.
Vijay
"Utpal" <[email protected]> wrote:
we have ConnectionEvent,how can I know whether the requestis from IIS or any other webserverWell, if you know ip address of the box where IIS is running, using
connection
filter you can isolate the requests that come from the IIS, right ?
Based on that decision, you could right the code which handles the request
as you
want.
-utpal

Similar Messages

How do I get rid of "Authentication Required" all the time?

In Firefox ONLY at certain sites (perhaps Google sites) a dialog box pops up and at the top it says, "Authentication Required" and I can type in any of my Google log-ins and click OK and it goes away FOR A TIME. It keeps popping up as I am browsing. There is usually a line pertaining to mail delivery. I can't seem to capture the dialog box in order to send it to you. Now that I would like to show you what it says I can't make it appear.

There is no "switch" to turn off Private Browsing. A "hack" was posted in this forum for Firefox 3.5 and 3.6 versions a number of times, but Firefox 4.0 has that file that needs to be hacked is inside the omni.jar file which makes accessing the file that controls PB a lot more difficult. Plus, the hack will probably be gone the next time Firefox is updated with a new omni.jar file.

System log - how to find out who has deleted the req from cube.

^hello friends
how can i find out who has deleted the request from cube ?
i wanted to check the system log , that who has deleted the request from cube .
could you please let me know how to check the same ?
regards
manoj

Hi,
Did you try the method I had suggested. It will work.
Also its better to try the path I had suggested as it will display the logs for that particular Cube only.
But if go through SM37 > B_DEL* it will display all the logs for all the deletion jobs not just this cube and it will be difficult to find out.
Try that and you should get the log.
Thanks,
JituK

Getting the file from IIS FTP Server using ALSB

Hi,
I want to extract a file from FTP server in ALSB.I am using ALSB2.5 and Microsoft IIS FTP Server.
Now i want to know that
1.Do i need to configure a Proxy service or Business Service to poll a file from FTP server?
2.How to read the contents of the file once the File comes in?
Regards,
Indu Garg

You need to configure a Proxy service for the polling.
The contents of the file will be inside the context variable $body.

SP 2010-After adding user from IIS is not found in central admin

Hi Experts,
I am trying to configure my SP 2010 with Form Based Authentication.
After configuring WebSite, STS and Central Admin I added the user from IIS , But not able to found from central admin in Form Authentication.
I checked in database the user is added.
I followed the below blog .
http://jasear.wordpress.com/2012/03/16/sharepoint-2010-setting-up-form-based-authentication-fba-using-asp-net-sql-membership-provider/
Can experts help me how to get the added user to central admin.
Thanks
AshisK

I was finally able to get the FBA working. After many failed attempts, I knew there was a configuration issue which was causing the error.
I provided connection string and provider details at 4 places, instead of the 3 mentioned in various blogs around ->
1. Sharepoint Central Admin
2. Sharepoint Web Services
3. SecurityTokenServiceApplication
4. And finally the web application itself.
The connection string for 2nd and 3rd will remain same however, provider details need to be added.
After completing this step, I was able to login using Form Based Authentication without an issue.
AshisK

Deactivate delta update before deleting the request from ODS

Hi all,
Happy New Year wishes to all.
I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
Request 98888 already retrieved by data target BWVCLNT
Delta update in data target BWVCLNT must be deactivate before deleting the request
Do you want to deactivate the delta update in data target BWVCLNT?
So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
Delta request is incorrect REQXXXXXXX in the monitor
A repeat needs to be requested
Data target still include delta request REQXXXXX
If the repeat is now loaded, then after the load
There could be duplicate data in the data targets
Request the repeat?
After execute changes it is showing only zero Records only.
What is that mean and why zero records it is displaying instead of delta records.
Anybody faces this type of problem please let me know. This is somewhat urgent to me
Thanks and Regards
Satish Chowdary

<i>Hi Satish,
First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
I hope this helps.
Thanks,
Krish
Dont Forget to assign Points.</i>
Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

Route the request from Proxy Service in OSB to external BusinessService URL

Hi,
How to route the request from Proxy service to the Business Service(Which is not registered in the OSB) using End point URL.Dynamically look up the URL and route the req from Proxy to Business service.
thanks in Advance
Edited by: user10680427 on Jul 14, 2009 2:57 AM
Edited by: user10680427 on Jul 14, 2009 3:34 AM

Hi..
Just set in within a routing options in a route node, either dynamic routing or just setting the uri, depends on your specific case..

Proxy Auth authentication required and kerberos

Hi All
Oracle supports the proxy auth trusted subsystem which allows greater scalability through the use of a system wide connection pool. There is a configuration option to "authentication required" to the proxy auth system.
Oracle also support kerberos authentication for external users.
What I would like to know is whether the proxy_auth authentication required is compatable with kerberos authentication. That is can I configure proxy auth to authenticate the tunneled user using kerberos.
Thanks
Edited by: user8002300 on 28/10/2009 16:47

Hi,
What you can do is to set up a reverse and the forward proxy. When the client hits the first proxy it should be configured as a reverse proxy which will redirect the request to the second proxy (this will be a reverse proxy) which will connect to the internet.
Hope this helps.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

I changed nothing in my email account but can no longer send emails on my talktalk account and get the message, "authentication required." I am running Mavericks on my MacBook Pro. I can receive messages on talktalk. Can send

I changed nothing in my email account, talktalk.net, but can no longer send (server's response, "authentication required) No problem receiving, I am using Mavericks on my MacBookPro. No problem using Cloud, but I want to use my talktalk account as before the problem
I can send and receive using talktalk without any problems using my iPod and iPad.
I would be most grateful for help - in simple form, please, I am an 80 plus female Mac lover!

Hello Hazel139,
I found this in one of the similar post hope it helps you.
Level 6 (14,190 points)
X423424X
This helped meRe: Problem SENDING email Jun 17, 2012 1:40 PM (in response to Casanewton)
The error I see is you did not specify the proper authentication for the smtp server.
In the Mail preferences for the account, smtp popup, select Edit SMTP Server List. A sheet will drop down. Select Advanced tab on that sheet. You should, I assume, set the Authentication to password, and set the proper username and password. That's where the poper would be set if 587 is not the one you should be using. Maybe it is. I only bring it up since I see it trying to use port 587.
If you got this stuff already set correctly then I don't know. Mail has a problem in your setup. Maybe delete the account and recreate it from scratch.
https://discussions.apple.com/message/18670442#18670442

Powershell Error for SharePoint Online -"The remote server returned an error: (407) Proxy Authentication Required."

I am trying to call sharepoint online from powershell. Below is the code. I get
Exception calling "ExecuteQuery" with "0" argument(s): "The remote server returned an error: (407) Proxy Authentication Required."
$loadInfo1 = [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client")
$loadInfo2 = [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Client.Runtime")
$webUrl = "ZZZZ"
$username = "XXX"
$password = "YYYY"
$ctx = New-Object Microsoft.SharePoint.Client.ClientContext($webUrl)
$ctx.Credentials = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($username, $password)
$web = $ctx.Web
$lists = $web.Lists
$ctx.Load($lists)
$ctx.ExecuteQuery()
$lists| select -Property Title
Raj-Shpt

Hi,
About how to access SharePoint online site using PowerShell, the blog below would be helpful:
http://social.technet.microsoft.com/wiki/contents/articles/29518.csom-sharepoint-powershell-reference-and-example-codes.aspx
Another two demos for your reference:
http://www.hartsteve.com/2013/06/sharepoint-online-powershell/
http://www.sharepointnutsandbolts.com/2013/12/Using-CSOM-in-PowerShell-scripts-with-Office365.html
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

When trying to launch iTunes it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." I am unable to enter a uname or password. Please help!!

When trying to launch iTunes on my PC running Windows 7 it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." Because iTunes is frizen at this point I am unable to enter a username or password, or in fact do anything. Please help!! I have uninstalled and reinstalled iTunes numerous times as well as attempting all of the fixes that I could find on-line and still no joy.

That sounds extremely phishy to me... iTunes does not require authentication simply to launch it. I suspect you've got something nasty intercepting network traffic. That server may be set up to log the Apple ID that you enter so it can be used fraudulently. Try ComboFix from Bleeping Computer.
FWIW the domain mellor.co is registered to an accountants in Knutsford, Cheshire, UK, and produces the same authentication request if visited with a browser. There is no sign of a "real" publicly visible website at that domain which is a somewhat odd.
tt2

The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumar

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif

Proxy authentication required when connecting to internet from SAP WAS

Hi,
I have deployed a J2EE application in SAP WAS 7.0 and this aplication wants to access an application from internet.
I have set the proxy server details in Visual Admin -> Web Service Container -> setting.
The server is installed locally in my PC.
I am able to run the same java application in my command prompt wit the same proxy details and it is able to access the 3rd party application , but when I am trying to access through web application through SAP WAS I am getting 407 Proxy authentication required.
Thanks in advance.
Regards,
Hari

Hi,
it seems like your Proxy requires authentication (e.g. Basic authentication)
I am able to run the same java application in my command prompt wit the same proxy details and it is able to access the 3rd party application
Are you providing any credentials here in order to access the internet via Proxy?
What kind of Proxy are you using
Cheers

MissingFieldException[ The following required field is missing from the lau

Hi, I'm new to this forum so please put this thread in the right place if I have made a mistake.
But here's my problem:
I'm using jre 7 with the latest version.
I downloaded and wanted to launch a Java based .jar game, which runs perfectly for the other users but my JRE gives the following error:
Application error - unable to launch the application.
MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
     at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main.access$000(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
On the forum where is the game developed i got the following answer:
''+it seems your OS/jre installation tries to start the jar as an applet which fails, because it's a regular application and not an applet. is there any way you can convince your jre to start LS as an application? i would like to give better/more detailed advice, but i'm not running windows, so i can't check for myself/try to work out a step-by-step guide.+ ''
As I have browsed the internet for hours and haven't come up with a solution I'm asking for some help.

That error seems to indicate that the JNLP file is broken because it is missing the starting starting <jnlp> XML tag; I'll take a guess and just say that it is completely empty. Since it works for other users, apparently somehow when you download it on your computer you end up with a broken file. No idea why, no way for me to know why either. I don't have access to your computer. All I can say is: try in another browser and if that doesn't work, try on another computer. If it works there, well then you may have to face the fact that your computer might need a clean install.
And PS: this is a Java programming forum, not technical support for whatever game you want to play that just happens to use Java.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

No Authentication required, if the req. from IIS

Similar Messages

Maybe you are looking for