No Changes to Apply

Hi,
I am running a form on web environment, Forms server 6i with 9iAS on Unix. In one of the key triggers I am inserting some rows into a table and finally committing by using commit_form, Its working fine in client server environment, but when I run it on web, I am getting a message "No Changes to apply." as an alert, and then "Frm40400:Transaction complete 2 records applied and saved". I do'nt know why that "No Changes to apply" alert is coming in between, it doesnt have any error type or code and also neither on-error nor on-message trigger is firing when this message is poping up. I want to supress this message. Kindly help me..
WIth thanks in advance
null

Create a form level trigger, ON-MESSAGE
Trap the message code, that way you can
suppress the message.
Sample ON_MESSAGE trigger:
declare
v_message_code number := message_code;
v_message_text varchar2(200) := substr(message_text,1,200);
v_message_type varchar2(3) := substr(message_type,1,3);
v_alert_button number;
begin
if v_message_code = 40400 then
Message('Record saved.');
elsif
v_message_code = 40000 then
null;
end if;
null

Similar Messages

FRM-40405, No Changes To Apply Message

Environment : Forms 9i, Web, 9iAS
Whenever a transaction is made, The "No changes to Apply" message is get displayed and then the transaction is applied and saved message appears.
How can i get ride to the First message?
ON-ERROR trigger containss the following code
if error_type = 'FRM' and error_code = 40405 then
null;
else
message(error_code ||':'||error_text,no_acknowledge);
end if;
Eben then, No change to Apply message Appears.

This is happening for all the Forms in our Application Just a guess...
Sounds like you are running your forms from a "master form" using OPEN_FORM(form_name, ACTIVATE, NO_SESSION); This will do the commit on both the called form and the calling form (and that's where the FRM-40405 comes from). You can use OPEN_FORM(form_name, ACTIVATE, SESSION); but this will create a new session for each form being called.
Try the CALL_FORM built-in instead.
Hope this helps (if my guess is wrong, forget it:)
Gerald Krieger

Ipod touch 3rd generation is stuck in "waiting for changes to apply" during sync

My iPod touch 3rd generation is stuck at "waiting for changes to apply" during sync. I have the latest update and the latest version of iTunes downloaded. Any suggestions for a remedy to this problem? Thanks!

Here is the link for the downgrade from Apple.
Link: http://support.apple.com/kb/DL1103
Here is the Link before you install Apple 10.3 downgrade Read Oct. 17th the 1st on of the 17th.where I said "A" OKAY
Link: https://discussions.apple.com/message/16500143#16500143
I went into my desktop PC the to Start/My music/iTunes folder.
In my folder there was nothing called ITunes Library.itl., but I had file called iTunes Library, in the center of it labeled "Lib", so I re-named it to "iTunes Library.itl.backup" Then went to the folder from iTunes" Previous iTunes
Library" and copied and pasted mine was iTunes Library 2011-04-02 right into the iTunes main folder.
Close your iTunes folder and then install the previous ver. 10.3 of the Apple link. I did not reboot PC. Did not use Cc cleaner nor add/Remove. then after 10.3 said finished installing 10.3 I clicked on my iTune Icon and iTune came up, iPod not plugged in yet.
Then I clicked on "let iTune to find all my music and install them", said towards bottom of iTunes.
Why we don't have the answer but iTune will put all your music in but you will have duplicates of the songs, so you will have your work cut out for you, takes time. plus some of my Artwork was missing, but I save that too.
I'm not Responsible for this instructions, this is what worked for me.
I think everything here is in order. Lot of my information came from all of you guys.Thank you. took a lot of reading, and trial and errors 2 1/2 day latter.

How to Fire Trigger, when changes are applied on destination??

Hi,
I want to fire the following trigger at destination, when changes are applied from source table (cms.test_2) to destination table(cms.test_2).
create or replace trigger Ins_and_upd
after insert or update of send_status on cms.test_2
declare
begin
update cms.test_2
set RECEIVE_STATUS = 'YES'
where UPPER(send_status)=upper('YES');
end;
Thanks,
faziarain

I am using oracle10g stream replication, and database version is "10.2.0.1.0".
Basically I have 2 machines named:
--> Site#1_DB ----> Having Table TEST_2 -----> Columns (BID,DBID,Send_Status,Receive_Status,Final_Status).
--> Center_DB ----> Having Table TEST_2 -----> Columns (BID,DBID,Send_Status,Receive_Status,Final_Status).
My Senario example is following:
At Site#1_DB TEST_2 Table contains the following data:
TEST_2 is updating and set the YES value in "Send_Status" column, and this change will replicated to Center_DB TEST_2 table.
BID----------DBID----------Send_Status----------Receive_Status----------Final_Status
1----------2----------YES----------NULL----------NULL----------NULL
2----------3----------YES----------NULL----------NULL----------NULL
3----------4----------YES----------NULL----------NULL----------NULL
4----------5----------YES----------NULL----------NULL----------NULL
At Center_DB TEST_2 Table contains:
In My Senario changes are successfully replicated at Center_DB TEST_2 Table and after replication
Test_2 table is same on both machines.
But Now I want to write my given trigger at Center_DB and this trigger will be fired when changes are replicated
from Site#1_DB to Center_DB.
BID----------DBID----------Send_Status----------Receive_Status----------Final_Status
1----------2----------YES----------NULL----------NULL----------NULL
2----------3----------YES----------NULL----------NULL----------NULL
3----------4----------YES----------NULL----------NULL----------NULL
4----------5----------YES----------NULL----------NULL----------NULL
Output After Firing the trigger at Center_DB:
BID----------DBID----------Send_Status----------Receive_Status----------Final_Status
1----------2----------YES----------YES----------NULL----------NULL
2----------3----------YES----------YES----------NULL----------NULL
3----------4----------YES----------YES----------NULL----------NULL
4----------5----------YES----------YES----------NULL----------NULL
Thanks,
Faziarain.
Edited by: [email protected] on Mar 30, 2009 10:00 PM
Edited by: [email protected] on Mar 30, 2009 10:17 PM
Edited by: [email protected] on Mar 31, 2009 3:48 AM

"no changes to apply" error

hi guys
am using oracle 9i and when i try to save inserts on a form i get the "no changes to apply"message.i click on it a few times before it allows me to save.i kind of think it is trying to save previous forms that are still open and finding there are no saves to be made.hoow do i stop this from appearing.am doing a demo on tuesday so i thank u for ur quick replies.thanks.and again i dont want my name to appear on the list like am a prisoner or something.how do i change my name to a human one???
ken

You'll probably want to ask this in the forms forum:
Forms
You can change your name and handle fields by clicking the "Your Control Panel" link when you are logged in.

FRM-40405 (No Changes to apply)

When i open a form through menu and save record i am getting the message 'FRM-40405 No changes to apply'.
I am not geeting the error while running the form independently i.e not calling through menu. commit_form built is used in key-commit trigger.
I am using OAS 4.0.8 and Forms 6i with Patch 1.

I think in this case, you issued a commit without actually changing any data, so the commit was not necessary. Many Times I had to do this and did not want to see this error.
What you can do to overcome this is to create a forms 'on error' trigger. Then trap the error like follows -
DECLARE
errnum NUMBER := ERROR_CODE;
errtxt VARCHAR2(80) := ERROR_TEXT;
errtyp VARCHAR2(3) := ERROR_TYPE;
BEGIN
IF errnum = 40301 THEN
Message('Your search criteria identified no matches... Try Again.');
ELSIF errnum = 40350 THEN /* no records found */
null;
ELSIF errnum = 41026 THEN /* FIELD OUTPUITING*/
Message('This field is calculated');
ELSif errnum=40401 then /* double commit somewhere */
null;
ELSif errnum=40505 then /* double commit somewhere */
null;
ELSif errnum=41050 then /* Record has been saved already */
null;
ELSIF errnum=41008 then /* Undefined Keys */
null;
ELSIF errnum=40100 then /* beyond first record */
null;
ELSIF errnum=40200 then /* field protected against update */
null;
ELSIF errnum=40352 then /* beyond last record */
endif;

Windows 8.1, iOS 8.1.3, Itunes 12.1 64 bit, constantly get 'waiting for changes to apply' when trying to sync my new ipod touch

Windows 8.1, iOS 8.1.3, Itunes 12.1 64 bit, constantly get 'waiting for changes to apply' when trying to sync my new ipod touch. Downloaded latest version f itunes, and ipod software up to date. Really frustrated I can't sync my music! Please can someone help me

Im having huge issues after updating to 12.1 on Win 8.1 x64. Choppy playback and so on.
Try this since it helps in most situtation :
Remove itunes but keep library files. Then download it again and install it.
Also most likely you will have to restore ipod touch. I restored my iPhone 5 to remove waiting for changes to apply and Error 54.
my iPad air still isnt restored (cant do it now) and it sometimes does same like iPhone waiting for changes to apply. And gives error 54 but sync DOES GET COMPLETED.
Also may sound stupid but try to use USB 2.0 Ports. Not 3.0. I have troubles when using 3.0

FRM-40400 No changes to apply

Dear friends,
I'm using a button to do a commit_form, i have 3 blocks (2 database blocks, 1 non database block).
when ever i push the button for the first time it commits the form without any messages, but after that it always shows (FRM-40400 No changes to apply).
i used :system.message_level like following:
N:= :SYSTEM.MESSAGE_LEVEL;
:SYSTEM.MESSAGE_LEVEL := 0;
COMMIT_FORM;
CLEAR_FORM(NO_VALIDATE);
:SYSTEM.MESSAGE_LEVEL := N;
but the message still appears after 1st push for the button.
can any one help me on this issue.
Please note that this issue happens only if i open the form using open_form method, but if i use new_form it works without any messages.
Best Regards
I found the solution, if you use call_form, you will be able to set the message level as you want. without being overridden by the calling form.
Edited by: Mohammad1981 on Feb 12, 2010 1:23 PM
Edited by: Mohammad1981 on Feb 12, 2010 1:28 PM

i'v found the answer after posing the question. you can find it above.

No changes to apply :/ something missing?

Hi everybody!
I have a simple form which do a display of the data contained in a table, and allow to update one of the fields. However, when I leave my form to open/navigate to another existing form and I do an execute query on the new form, a message appears before the query is executed: "No changes to apply"
I believe something is missing in my form. Any idea ?
Thanks in advance

Hi!
Do you have a call to the post or commit_form build-in in your call-form trigger?
Regards

"no changes to apply" error message

hi guys
am using oracle 9i and when i try to save inserts on a form i get the "no changes to apply"message.i click on it a few times before it allows me to save.i kind of think it is trying to save previous forms that are still open and finding there are no saves to be made.hoow do i stop this from appearing.am doing a demo on tuesday so i thank u for ur quick replies.
ken

You do not tell us how you are doing the inserts. It appears that you are not using 'normal' forms functionality and inserting via a database block. The "no changes to apply" message actually means "no changes to apply in any database blocks". It does not take into account any explicit dml code you are running from triggers. The fact that you are getting the message more than once suggests the code you have written involves more than one commit.
The previous reply will solve your problem, but if you are not using database blocks you might not be making best use of forms functionality.

Custom Master Page changes wont apply to few page layouts

Dear All
I'm having issue applying custom branding to SharePoint 2010 sites.. Branding works overall fine but it doesn't apply to few pages.
For example if I click on Enterprise and Metadata Keyword Settings in Document library the changes are not applied. I notice it's a page called metadatacolsettings.aspx in layouts and I see it references application.master.. Similarly I see couple
of other pages out of sync and all of them have application.master as Master Page..
Any ideas why this could be happening.. Please let me know
Thanks

Hi,
pls check below links
There are a few things to consider.
Have all page layouts / master pages been checked in and published / approved?
Have you created a new page using the custom page layout?
Are you creating or modifying this content?
Keep in mind, the progression of rendering goes as follows:
masterpages determine the ASP.NET structural layout.
Page Layouts determine the SharePoint structural layout based on the masterpage ASP.NET structural layout.
Your .aspx pages determine what content to display based on the Page Layout SharePoint structural layout.
https://social.technet.microsoft.com/Forums/sharepoint/en-US/00d354cd-e49b-429f-8648-50251e1b39a0/changes-to-page-layout-not-refelected-when-using-custom-master-page?forum=sharepointcustomizationlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

Style sheet changing when applied to text within a table

Hi everyone,
I'm using ID CS2.
I've defined a paragraph style sheet with the regular weight of a certain typeface, however when I apply this style to text within a table, the typeface changes to the bold version of the font even though the regular version is specified in the style.
Does anyone know if this is a known issue with styles being applied to tables or is it a sign of a corrupt file or something? Is there a fix?
Thanks

Is there a character style applied to the table or text in the table. I had many issues with this over-riding my paragraph style.

Changes wont apply to ipod touch

I just wanted to add maybe 4 songs to my ipod and a movie. the syncing would go fine, doing its business. the Free space available would go down like its supposed to after putting more stuff on your ipod. but then when it finished doing its then- instead of having the only 9.54gb os space free on my ipod- it goes back up to 10.88gb free like nothing happened. And the songs arent on there. so i figured maybe the movie was the problem. so i remove the movie. no.
still goes through its 5 minutes of "waiting for changes to be applied" and then nothing happening at all.
any one have any clue why or what is going on? yes, everything is up to date. ive tried restarting itunes, my ipod. restarting the computer. maybe theres something else i need to do but i have no clue.
help?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

RMAN recover on a different server - Verify all changes are applied

Hey everyone,
I have two database servers, Oracle 10g SE on linux. One is the 'primary', and we plan to switchover to the other newer server. In order to minimize the downtime from a duplicate database, or a full backup and restore/recover, I restored the database to the newer server using RMAN, and just continuously apply the archivelogs generated from the original database through RMAN> recover database;.
My question is, at the time when we do do the switchover, how can I ensure that all changes in the database are written to the archivelogs? I understand I can do a 'alter system switch archivelog' until all groups are inactive, but will this be enough? I've noticed that when I force an archivelog switch, the previous group still has an 'ACTIVE' status, even though I thought that the ARC process had just written out all the changes from that redo log to the archivelog?
Any help would be much appreciated. Thanks

Dear oscrub,
You can compare the system change numbers on both databases and you can also use the standby redo log files for synchronized data replication with the maximum availability or maximum protection protection levels.
I you don't want to see the archivelog as ACTIVE state you need to run the following command;
SQL> ALTER SYSTEM CHECKPOINT GLOBAL;You will manually trigger the checkpoint and the data in the redolog (active one) will be written to the database thanks to the database writer processes. With that way, you won't see the online redo log as ACTIVE state. You will see online redologs as "CURRENT" and "INACTIVE".
I hope that addresses your questions.
Regards.
Ogan

Menu background color has changed after applying Forms Patch3 (10.1.2.3.0)

Hi,
we have applied Patch3 on our Forms Environment.
Now the menu background color has changed from green to gray (colorScheme is "teal" in formsweb.cfg).
This behavior isn't documented and our customer want's to get the green menubar back...
Any hints?
Greetings, Florian.

removed because of obsoleteness...
Edited by: W1zard on Feb 2, 2009 4:57 PM

No Changes to Apply

Similar Messages

Maybe you are looking for