No correction due to the value change in Rebate

Hi,
I followed the procedure but still it gives me the above error.
Run the SDBONT06 with the Agreement, but it gives me the error No correction due to the value change for the XXX invoices.
Also run the RV15B001 and RV15B002 and again run the SDBONT06 but still not resolved the issue.
Still anything i miss? please suggest
Thanks
Hrishi

Hi Lakshmipathi,
No condition type was removed for the said invoices, but the prices has been changed manually has been observed, hence i think system pop the above message, i also checked the Note that you provided, but i did the right steps as per the note.
Any other input?
Thanks
Hrishi

Similar Messages

How can I fire an event case on the value change of an indicator, or a network variable?

Hi! I have an event structure setup to look for a value change of an indicator on the front panel. The indicator is updated by the value of a boolean network-published shared variable through a seperate parallel loop that is polling all of the network-published shared variables. The event, however, does not fire when the indicator changes value. I have switched the indicator to a control and tested it with user interaction and that works just fine.
I want to use the event structure space for my code exectution because it seems logical that that is where it would go, and it will help keep my block diagram tity. The code is also something I would like executed with the front pannel temperarily disabled. I would rather not have the code in my network-variable polling loop because again the tity issue. I would also rather not use a notification VI wired to an independent loop for this particular code.
Is there a way to have an event structure fire an event with the value change of an indicator, or a network variable directly?
Thanks for your input.
LV 8.5
-Nic

Thanks for the reply.
I went about things a little differently, but got them to work so..... . It really was not my desire to have a boolean indicator on the front panel. As previously stated, my ultimate goal was to have an event fire on the change of a network variable, which I had to poll for anyway but that is tucked away in a section where I am handling all my network variables. I ended up using that Create User Event, Register User Event, and Generate User Event SubVIs to handle the task.
I've read the help for all of those SubVI's and it is not entirely clear to me if the event fires every time the "Generate User Event" receives some inputs, or if it only fires when the value changes. I could do a test to find out. It wouldn't be too difficult to add a shift register or a feedback node and place the Generate User Event in a case structure so that it is only fired when the input changes state.

How to response the value change of slide bar only after mouse released

Hi, all
When I used the slide bar to control my device, I response the value change of slide bar and set the new value to my device. But it will generate response constantly when I use the mouse to drag the pointer, which is not my wanted. I just need to response only after the mouse released. How can I implement this function?
Hope your suggestion, thanks a lot.
Solved!
Go to Solution.

No, not if you use the right event under "Mouse".
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx

Calling the value change listner automatically for a checkbox.

i have some booleancheckbox column in a table.i have defined some code in the valuechangelistner in backing bean.when i am clicking any part of the table's row it automatically calling the value change listner;but my requirement is it should call the value change listner when i am only checking the checkbox.
i am using jdev 11.1.1.5.
So can any one bring some solution .
Thanks in advance.

i have some booleancheckbox column in a table.i have defined some code in the valuechangelistner in backing bean.when i am clicking any part of the table's row it automatically calling the value change listner;but my requirement is it should call the value change listner when i am only checking the checkbox.
i am using jdev 11.1.1.5.
So can any one bring some solution .
Thanks in advance.

DefaultCellEditor in JTable can not update itself when the value changes

Hi,
I have a JTable which has 4 columns. The 3rd column has a comboBox. whenever I select an item from the first row, the cell at (currentrow, 4thcolumn) will be updated according to the item selected.
Now the problem is, after selecting the item in any cell with 3rd column, the row is updated correctly, but then all comboBox in column 3 are gone! I cannot figure out what causes this. Please help! Any suggestion will be greatly appreciated!
Jing

Thanks! Could you give more details on how to use the second approach?
I have a table with two columns, one called ID and the other called Value. I'm using JComboBox for the Value column. Whenever I select an item from the comboBox, I want the value in the cell under the ID column to change value to the value selected in the comboBox.
The problem I'm having now is although I can change the value in the comboBox and which triggers the event to change the value under the ID column, when I click the comboBox of another row, the cell under ID of the previous row changed also, before the value under ID of the current selected row.
I think the problem is there is no distinct comboBox for each row of the table. Seems like when one box change and trigger an event, that event performed in every other rows in the table.
Following is the code:
public class Test extends JPanel{
 DefaultTableModel tm;
 JTable table;
 JScrollPane nscrollPane;
 public int total=4;
 public Vector datavec, thvec;
 public Test(Vector datavec, Vector thvec){
 this.datavec=datavec;
 this.thvec=thvec;
 tm = new DefaultTableModel(datavec,thvec);
 table = new JTable(tm);
 table.addMouseListener(new PopupListener(table));
// table.addMouseListener(new PopupListener(table));
//tm.setTableHeader(table.getTableHeader()); //ADDED THIS
int height = table.getRowHeight()*table.getRowCount();
table.setPreferredScrollableViewportSize(new Dimension(500, height));
//Create the scroll pane and add the table to it.
nscrollPane = new JScrollPane(table);
setUpNNColumn(table, table.getColumnModel().getColumn(1));
//Add the scroll pane to this panel.
add(nscrollPane);
public void updateLabel(Integer size)
 int r=table.getSelectedRow();
 if(r!=-1)
 ((Vector)datavec.elementAt(r)).setElementAt(size, 0);
 repaint();
public void setUpNNColumn(JTable table, TableColumn nnColumn) {
 //Set up the editor for the sport cells
 JComboBox comboBox = new JComboBox();
 comboBox.addActionListener(new ComboBoxListener());
 int num=total/2;
 for(int i=0; i<2; i++){
 comboBox.addItem(new Integer(num*(i+1)));
 comboBox.setSelectedIndex(1);
 nnColumn.setCellEditor(new DefaultCellEditor(comboBox));
private class ComboBoxListener implements ActionListener{
 public void actionPerformed(ActionEvent e)
 JComboBox cb = (JComboBox)e.getSource();
Integer size = (Integer)cb.getSelectedItem();
 updateLabel(size);
private static void createAndShowGUI(Vector a, Vector b) {
\ JFrame.setDefaultLookAndFeelDecorated(true);
//Create and set up the window.
JFrame frame = new JFrame("Nearest Neighbor Fact Table");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Create and set up the content pane.
Test newContentPane = new Test(a, b);
newContentPane.setOpaque(true); //content panes must be opaque
frame.setContentPane(newContentPane);
//Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
 int patidx, hitnum=2;
 Vector a=new Vector();
 Vector a1=new Vector();
 Vector a2=new Vector();
 a1.add(new Integer(1));
 a1.add(new Integer(4));
 a.add(a1);
 a2.add(new Integer(2));
 a2.add(new Integer(4));
 a.add(a2);
 Vector b=new Vector();
 b.add("ID");
 b.add("Value");
 //StatTableGUI.createAndShowGUI(gd);
 Test.createAndShowGUI(a,b);
Any suggestions? Thanks!
Jing

Forall change the values of columns in his order

Hi all,
I have a problem by using the forall-clause.
In the example you can see, that I declare a collection type which is based on a table structure with rowtype.
A select-statement fill my collection-type correctly.
After executing a insert with the forall-clause, a follwing select-statement shows me, that the values of my data are not in the correct column. The values of 3 columns are changed in there order.
But I know that the data correctly stored in the collection-type
How it can be? Actually, I cant believe that.
Who can help me?
Example
declare
type foo_type is table of my_tab%rowtype;
foo foo_type;
begin
execute immediate 'select * from any_table'
bulk collect into foo;
forall i in foo.first..foo.last
insert into my_tab
values foo(i);
end;
Thanks in advanced for any help.
Michael

Hi,
the tables are only fictitious.
any_table can have
any_col1 number,
any_col2 varchar2(10)
any_col3 number
my_tab can have
my_col1 number,
my_col2 varchar2(10)
my_col3 number
In the program-code the structure of the collection-type is the same of the table in that I want to write the data.
Thanks
Michael

Problem in getting the current value of the drop down while calling value change listener

I have 2 drop down list. I am trying to get the value of first drop down from other drop downs value change listener. Initially one drop down contains a default value. First time I got the value while calling the value change listener. But if I change the default value to other in the first drop down and call the value change listener of the second drop down then I got the old value in the bean. Can anyone suggest a process

If I use the following code it gives me the current index.
            valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
            System.out.println(valueChangeEvent.getNewValue());
This is also giving me current index.
BindingContainer container = BindingContext.getCurrent().getCurrentBindingsEntry();
AttributeBinding attrIdBinding = (AttributeBinding)container.getControlBinding("PersonTypeId1");
if(attrIdBinding.getInputValue()!=null)
               System.out.println(attrIdBinding.getInputValue().toString());
But at last I got some help from Shay Shmeltzer's Weblog.
BindingContainer bindings =
                BindingContext.getCurrent().getCurrentBindingsEntry();
                // Get the sepecific list binding
                JUCtrlListBinding listBinding =
                (JUCtrlListBinding)bindings.get("PersonTypeId1");
                // Get the value which is currently selected
                Object selectedValue = listBinding.getSelectedValue();
                  long value =0L;
                if(selectedValue!=null){
                    System.out.println("Sudip.. Person Type using bindings"+selectedValue.toString());
But this returns "ViewRow [oracle.jbo.Key[300000860721156 ]]"
300000860721156 is the original value.. Would you please help me to figure it.

User exit to sense the field value change ?

Hi Guru,
Our ABAPer created 4 customized fields in "Addition data A" and the requirement is once the value of these customized fields' are changed, copy (overwrite) the changed value to material description on the "sales" View
Is there any user exit can sense the value change from the customized fields ?
Thanks
Eric
Edited by: Eric Y on Aug 11, 2008 11:45 PM

USEREXIT_CHECK_VBAP in program MV45AFZB is called when the field is changed.
/Torben

How to tackle the dataflow problem when Value Change event always triggers after another GUI event

We know that Value change event always triggers after another GUI event. Eg, the user modifies string control, the user clicks on a boolean control. Then event boolean clicked is triggered before event string control value change.
Now suppose somehow the GUI event that must happen to subsequently trigger the Value change event can potentially affect the data that Value change event is supposed to work on. How can we tackle this problem ?
For example, in a mockup application that the grand purpose is to have user entered values in a textbox logged to a file (no missing information is accepted, and there is a boolean to determine how the information is logged).
There are 2 controls, boolean A when clicked (mouse down) will load random number in text box B. Text box B is designed with event structure VALUE change which saves whatever values user enters into text box B to a log file.
There are 3 problems when instead of clicking anywhere on the front panel after modifying text box B, the user ends up clicking on boolean control A.
1. Event mouse down on Boolean control A will execute first, modifying text box B content before the user entered values in B get saved.
2. The value of boolean A can potentially affect how textbox B is loggged.
3. The value of boolean A affects how the file is logged and this is indeterminate. Somehow when running this VI with no Highlighting, the textbox B Value change event executes -before- boolean A value is updated (F to T). When running this VI with Highlighting, the boolean A value is updated (F to T) (because we click on it) -before- textbox B value change event occurs. Why is it like this ?
Now the situation I made up seems non-sense, but I believe it resembles one way or another a problem that you might run into. How would you solve this problem elegantly ?

You can set the string control to "update while typing".
Are you sure appending the log to itself is reasonable? Wouldn't it grow without bounds if the users keeps entering strings or pressing the ingore button?
Why isn't the "constant" a diagram constant instead of a control. Is the user allowed to change it?
To reset just write empty strings or a false to local variables of the controls (renit to defaults" seems a bit heavy handed).
All you probably need is a single event case for "ignore:value change" and "String" value changed", no need for the local variable..
Also add a stop button and an event for it.
You don't need the timeout event.

Unable to get the value from the textfield in valueChangeEvent

Hi,
I have created one custom textField by extending the CoreInputText. Now i have attched default ValueChangeListener to it. I am using this textField in my application.
Now i type some thing and do a focus lost, the value change listener get called. i want to validate the value entered. In that listener method if i take the getSource() from ValueChnageEvent object and do a getValue() I am getting the entered value.
My problem is that if i do a getValue() of the textField i am not gettting the value entered.
How can i get the entered value from the textfield.? Is there any method to notify to do this?
Thanks in advance.

Hi,
I tried to the value from coreInputText also. If i check the getValue method of the component, i am getting the last updated value. I have debug the FlowPhaseListsner also. And i found that this listener is calling before the updateModel phase. Due to that i am not getting the value from the Field.

Will "Value change" events fire when changed via ActiveX?

I have a VI with an Event Structure defining several Value Changed events. These events are associated with various buttons on the control panel. When I work through the panel and press the buttons, the events fire correctly. However, if I connect via the COM/ActiveX control and change the control values, the button indicator light changes, but the Value Change event does not fire. Can we trigger value changed events remotely or must they be triggered via a mouse-click on the button?

Hi Cyle,
Please take a look at the document below. It explains why the events are not being fired.
Event Structure Does Not Capture the Value Changed Event for Indicator Wired to Iteration Terminal
I hope this helps.
Sincerely,
Feroz
National Instruments

Differentiating HTTP Request through a URL and a value change listener

Version Details:
Oracle JDeveloper 11g Release 1 11.1.1.4.0
Studio Edition Version 11.1.1.4.0
Build JDEVADF_11.1.1.4.0_GENERIC_101227.1736.5923
IDE Version: 11.1.1.4.37.59.23
Product ID: oracle.jdeveloper
Product Version: 11.1.1.4.37.59.23
ADF Business Components 11.1.1.59.23
Java(TM) Platform 1.6.0_21
Oracle IDE 11.1.1.4.37.59.23
Versioning Support 11.1.1.4.37.59.23
Base Details:
The Product, that a different team is working on (which I cannot access, code, touch,...), creates reports and essentially generates a URL with a bunch of parameters:
http://<host>:<port>/myApplication/main.jspx?parameter1=value1&parameter2=value2...When the user clicks on an "Edit" button, a modal popup window is displayed (using jQuery) with an embedded iFrame with its source pointing to the above URL.
The "myApplication" is an ADF application which brings up an ADF form based on the parameters. Once the user enters the data, validations occur and the data is written into a total of 3 different Tables in the Database. Once the operation is finished, the user closes the popup by clicking on the "X" button of the popup window, which essentially does "popup.*hide()*".
Limitations:
<li>Since there are varied combination of parameter values and associated ADF forms, taskflows is not* an option.
<li>Since the logic of generating the ADF form is not straightforward, ADF BC is not* an option.
<li>Since validations are based on the value change listeners, the managed bean has to be a session scope_ bean.
Problem:
When, for the first time, the user clicks on the Edit button with a particular set of parameter values, the corresponding ADF form is displayed and things work normal. Since the managed bean is under session scope, the form generated for the first popup window stays the same for any subsequent popup windows, even when the URL and its parameters are completely different. As I can not listen to the popup close event, I cannot invalidate my session either.
I tried using filters in the web.xml to grab the request and apply the business logic. Due to the presence of multiple value change listeners (too many <tt>autosubmit=true</tt>), every value change listener triggers a request and so the business logic gets applied with every value change.
After some tests, I deduced that the difference between the call from iFrame and the call from value change is the HTTP Request Method - GET for iFrame and POST for value change listener. So in my filter I apply the business logic when there is a GET request and not apply when its a POST request.
Turns out, that is not a valid enough differentiation between the two requests being made. Sometimes, even the value change listeners are issuing a GET request.
Question:
*1*. Is there a way to force the value change listeners to always trigger a POST request?
*2*. Is there a way to differentiate the requests originating from the other team's Product and those generated by my own value change listeners?
*3*. Is there a different approach, incorporating the above-mentioned limitations, to clear out the session scope each time when a request is made through iFrame? That is, whenever a request is made through the other team's Product?
Edited by: user737922 on Apr 13, 2011 10:58 AM

_(Temporary) Solution_:
Summary:
I am using the request parameter <tt>_adf.ctrl-state</tt> to differentiate between the HTTP requests that my application receives.
Details:
When I receive the request from the other team's Product, I receive a <tt>GET</tt> and a <tt>adf.ctrl-state</tt> value which I store into a local variable in my session-scoped managed bean. The <tt>adf.ctrl-state</tt> value stays the same for all requests (<tt>GET</tt> or <tt>POST</tt>) made from within my own application. It changes only when there is a new request from the other team's Product.
Also, as my application is accessed through an iFrame, there is no possibility of the generated URL being modified by the end-user.
For now it seems that the solution is appropriate but I am not fully confident if relying on the <tt>_adf.ctrl-state</tt> value is the best approach.

Changeable, new rel. if new strat. or value change/outputted

Hi There
My understanding that when selecting "6 Changeable, new rel. if new strat. or value change/outputted" and setting the " % Value Change " to 0.5 the Purchase Order release strategy sould be restarted if the P/O value is changed and is greater that 5%, but what is happening is that even if the value is less than 5% the release strategy is reset. Why is this happenig?

Transfered to the correct Forum

How to put a page break when a value changes

Hi there, I am very new to BI Publisher. I realize this is a really SIMPLE question, but I can't seem to find a CLEAR answer.
I have a set of data that I have a repeating group for in my RTF template and it works great. But I want to have a page break each time one of the values changes and I cannot figure out how.
here is the xml
<?xml version="1.0" encoding="UTF-8" ?>

<PIR05>
<LIST_G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>123</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>614</LINE_NO>
<COUNT_NO>614</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
- <G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>1232</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>615</LINE_NO>
<COUNT_NO>615</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>562354</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>WOR RECV</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>603</LINE_NO>
<COUNT_NO>603</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
</LIST_G_ITEM_NO>
<WHSE_DESC>OPM INVENTORY ORG</WHSE_DESC>
<CS_NODATA>617</CS_NODATA>
<CYCLE_NO>000000014</CYCLE_NO>
</PIR05>
I want the g_item_no (repeating group) to have a page break each time LOCATION changes.

You can declare two variables, to hold the previous and current LOCATION values and break the page when it differs.
Or just before your end-for-each, have this code.
<?if:position()!=1 and position()!=last() and LOCATION!=following::LOCATION[1]?><xsl:attribute name="break-before">page</xsl:attribute><?end if?>
Ensure that its placed in a form field.
This will have a page break when LOCATION changes.

Double value change event if cursor is set busy (LV2009)

Hello everybody,
I just migrated from LV 8.0 to LV 2009 (on linux) and now got problems with a value change event. I want to send a command if a button is pressed and send another one if the button is released. After sending the command I need to wait for an acknowledge from the receiver and to avoid user interaction in between I lock the cursor with "set busy" VI until the acknowledge is received. To see, when the button is pressed or released, I use a value change event. Inside the event structure the cursor is set busy.
This worked reliable in LV 8.0 but not any more in LV 2009. The button's mechanical action is set to "switch until released" and if I press the button and keep it pressed it is reset to false automatically. The value change event is fired twice instead of only once (see attached vi) and "new value" is one time true and one time false. This doesn't happen if the mechanical action is set to "switch when pressed".
Does anybody have an explanation or a workaround for this behaviour? Am I doing something wrong or is this a bug in LV? For now I'll just keep the cursor unlocked.
Thanks for your help.
Attachments:
setMouseBusy_01.vi ‏11 KB

Hi ckis,
attached you'll find your modified example, it should do the trick now.
Regards,
Bernd
Attachments:
setMouseBusy_01.vi ‏9 KB

No correction due to the value change in Rebate

Similar Messages

Maybe you are looking for