No Data displayed in the query

Hi All,
I have created a query on master data.
Data is available in Master data, but I am not able to view any data in query.
Any suggestion?
Thanks
Vandana

Hi,
Have you activated the data?
regards,
raju

Similar Messages

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Show alert after data display from the form

After query, if date of birth is NULL then display message, but this message must pop up after data displays on the form.
I try different post triggers, when-new-item-instance, when-validiate-item trigges, they all display message BEFORE the data. Any suggestion?
Thanks

hi kathy,
What you have to do is after the commands to display the data, you give the builtin SYNCHRONIZE; then give message statement. It should work.
Murthy

How can i display all the query items to a table?

how can i display all the query items to a table in a jsp file?
i always have an out of memory error..

any body??any idea?
is it possible thru configuration or i have to write a program by the abaper??
Biswa

ERROR MESSAGE : display of the query spec is not allowed

Hi all,
I have many queries built under a multiprovider. The problem is if i try to chane a query it is not allowing me to do it. Even for a query which i built it is not allowing. It is displaying an error message 'display of the query spec is not allowed'.
Can anyone help me in understanding this issue?
Thanks,
Raj.

Have you check your authorizaiton trace with ST01?
You need authorization for this query in auth obj S_RS_COMP or S_RS_COMP1

Date format at the query

hi
Can You Please suggest how minimal we can correct this at the query output
My coming output for the date field at the query is
01/28/2008
04/27/2006
06/1/2006
05/16/2006
Desired Output for the query field at the query is
1/28/2008
4/27/2006
6/1/2006
5/16/2006
Zeroes should not be present can you quickly help me in this regard

Hi
Check conversion routine on info object maintainance .
Regards,
Chandu.

While Creating New Insert Form Existing Data Display from the Table

Hi
I am New To Sun Java Studio Creator and New to Java Also While Creating New Insert Form Existing Data Display from the Table while i am Run the Form. Can any one help me to Solve this one

Dear Giri,
As per your Advise, Literally I have Search the Properties for the Components to set value Null, but I am Unable to find the Value in Properties palate. I have tried in various options like
In the Properties Palate
TextField1_onselect use Value null
TextField1_text I have selected use Value option and I have manually Keyed-in null;
In the JSP Page, I have manually keyed in the null value below said
<ui:textField binding="#{BI.textField2}" id="textField2" style="position: absolute; left: 240px; top: 96px" text="#{BI.bDataProvider.value['ISSUENO'] = null}"/>
<ui:textField binding="#{BI.textField2.Value = null }" id="textField2" style="position: absolute; left: 240px; top: 96px" text="#{BI.bDataProvider.value['ISSUENO'] = null}"/>
At last I am Failure. I am ignorant of it. Can you please help me on this where I have to set null value for the components? I will be very kind of you

Additive delta causing problem with data being displayed in the query.

Hi,
I am having a delta mechanism to load data from ODS to cube. The delta runs everynight and when we run the report for yesterday the report works fine but if some of the line items changed during the course of the day today the delta is picking them up today in the nightly job. When I run the report tomorrow for yesterday and today the report is displying incorrect data because the cube thinks there are more than one line items.
for eg: Yesterday let's say
Salesdocument customfield docitems Keyfeild
ODS : 1001                 1                1            1
IC:      1001                 1                1           1
When I run the query today and "customefield" is in the report it is displaying value of "1" which is correct.
Today let's say the key feild has been changed to 2. Since ODS is overwritable
ODS : 1001        1     1 2
but in IC, I see
IC:      1001         1    1 1
          1001         1    1   -1
          1001         1    1   2
and when I report on "Customefield" it displays the value of "3" instead of "1". Is there any way to solve this issue.
Very urgent.
Thanks,
PV

PV,
Normally when the delta is loaded from an ods to cube, it will have two records, one will be the reverse image of the existing record and a new image of the record. So, in your case (I think you are referring to change in key figure and not the key field)
After the change, this is how it should look like --
ODS : 1001 1 1 2
IC: 1001 1 1 1 (original record)
1001 -1 -1 -1 (reverse image of the old record)
1001 1 1 2 (new image)
So when you run the report, you will get the following correct result.
1001 1 1 2
If this is not happening, then there must be something else. You can check all this by loading the delta to psa and looking for the particular record etc.
-Saket

Data Error in the Query/Report after selective data deletion for infocube

Hi Experts,
Please advise what i was missing and what went wrong...
I got a Query (Forecast) on a Multicube...which is based on 2 Infocubes with Aggregates...
As i identified some data discrepency..yesteraday i performed selective data deleation on one of the Infocube
and executed report yesteraday and the results in the query are correct...
When today i executed the same report i am getting different results..
When i compared the results of the report with that of data in cube they are not matching
The report is not displaying the data in cube..for some rows it is displaying the data in the cube but for some rows it is just displaying same as the above row
there is no data loaded into info cube after selective deleation
Do i need to perform request compression and fill the aggregated after selective deleation
Please advise what went wrong

Hi Venkat,
No i haven't done anything on aggregates before or after selective delete
As there is not data load after the selective delete according to SAP Manual we don't need to perform any thing on aggregates...as selective data deletion on cube will delete data from aggregates as well
Please update how to identify error

Data Error in the Query Output

Hi Experts
Could you please advise me how to proceed.....and impact of Aggregates
I had a Query based on a Multicube which in turn is based on 4 Infocubes
IC1-North,
IC2-South,
IC3-EAST,
IC4-WEST.
I had Aggregates developed on
IC1-North,
IC2-South,
IC4-WEST.
Data is loaded according to Location to the respective cubes
When i execute query based on Multicube...in the variable screen i had a user entry variable...when i select the drop down list of avaliable Location...the list doesn't contain EAST as a Location ID and also when i execute the query with out location it is not displaying IC3-EAST data in the output
Could you please update me ...what might be the reason of the problem and how to proceed
Thanks

Hi Venkat,
No i haven't done anything on aggregates before or after selective delete
As there is not data load after the selective delete according to SAP Manual we don't need to perform any thing on aggregates...as selective data deletion on cube will delete data from aggregates as well
Please update how to identify error

Keyfigure value by comparing 2 date fields, in the query designer.

Hi all,
Could any one please intimate, how to display the key figure result with the comparison of 2 date fields.
We are having "Completed Date" say(CDATE) and "Deadline Date"(DDATE) values in the report as time characteristics, dervied from the CRM system.
Now we need to compare the values as:
CDATE <= DDATE, then only consider this under "Meeting Planned Date"(Key Figure).
Could you please intimate, how to display the key figure value, by using the code at the query designer level.
Thanks & Regards,
A.V.N.Rao

Hi Rao,
Simple create two formula variables with replacement path from these two date fileds,then create a formula then do the comparison
Eg:
ZVAR_CDATE WITH REPLACEMENT PATH PROCESSING TYPE REPLACED WITH OBJ CDATE
ZVAR_DDATE WITH REPLACEMENT PATH PROCESSING TYPE REPLACED WITH OBJ DDATE
CREATE A FORMULA FORMULA1: IN THE FORMULA BUILDER AREA DO THE COMPARISON.
Thanks & Regards
Ramsthota

Data status on the Query

Hello,
What are the ways can we do this ....
When a BW user logs on to execute a query via Analyzer, Query Designer or on the Web. The BW User should be notified at the point of executing the query in some manner if there is any problems with the loading of the cube, masterdata, or any other info objects pertaining to the query.
In other words, the user is to be informed if the data is not valid at the point of running the query.

I am not aware of the way where the message is automatically displayed ... but here is one way..
Enable "Display Text Elements"
Bex Analyzer Tool bar -> Layout -> "Display Text Elements" -> General
This will display all the general Information of the query such as the user who created the query, InfoProvider of the query, Key Date, Status of Data, Last Refreshed etc. If the "Last Refreshed" is greater than "Status of the data" then it means the last refresh has not yet successfully finished. I am not sure if there is any other conditions where this "Status of the data" date will be less thatn "Last Refreshed" Date.
Hope this helps!
Regards,
Vinod Swarnapuri

Key figure display in the query

Hi experts,
In a query in the columns we have 3 key figures. I dragged a characteristic into the columns and
executed. Now for each value in the char it is showing all the 3 key figures.
My requirement is, for only one keyfigure value the characteristic should show the value. For the
remaining 2 key figures it should not show.
The remaining key figures to be displayed as normal.
How to get this ?
Regards,
Nishuv.

Hi Rao,
Thanks for the reply...
My requirement is :
We have netvalue and cutomer outstanding key figure in the columns.
I want to drag terms of paymnet characteristic into the columns.
By doing this the query output will be as follows:
Terms of payment
Net value|Customer outstanding
But my requirement is Terms of payment should be only for Customer outstanding i.e
Terms of payment
Customer Outstanding
It should not take the Netvalue under terms of payment.
Netvalue should be displayed outside.
How to do this ?
Regards,
Nishuv.

Problem to get ResultSet when it is used a Date type in the query condition

hello ,
I having a bit of nightmare getting a ResultSet how result of one simple Query for a table when the condition WHERE involve a Date type.
To change the String value in a date to use in the query condition, I tried both:
String strDate = "dd/mm/yyyy";
(1.) java.sql.Date sqlDate = new java.sql.Date(strDate.getTime() )
(2.) SimpleDateFormat formatter = new SimpleDateFormat(strDate) ; sqlDate = formatter.parse(strDate);
and finally I use this code to get the ResultSet:
sql = "SELECT * FROM myTable Where (idCli = " + cd_Cli + " And dateReg = " + sqlDate + ")";
statement = connection.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
resultSet = statement.executeQuery(sql);
boolean ok = resultSet.last();
totNumberOfRegistration = resultSet.getRow();
But In both the cases I get a empty resultSet.
I shoul like if someone would look my code to say me where it is the mistake...
thank you
tonyMrsangelo
P.S. I tryed using PrepareStatement too to get the ResultSet, but in that case I couldn't use the ResultSet because executing the statement resultSet.last() I get the error: "Result set type is TYPE_FORWARD_ONLY"

In a database like Oracle, you need to use a function like TO_DATE; other databases may have something similar.
However, the proper way to do this is to use a PreparedStatement. Then you can say
PreparedStatement ps = conn.prepareStatement("update SOMETABLE set SOME_DATE=? where SOME_ID=?");
ps.setDate(1, new java.sql.Date(someJavaUtilDate.getTime()));
ps.setInt(2, theId);
ps.executeUpdate();

ERROR displaying in the query output... urgetn

hi experts,
For the amount keyfigures in the query output it displaying ERROR after the amount like ex- 2000 ERROR.
plz let me know how to rectify this..
regards
vadlamudi

hi,
i have created only two keyfigures EMP_BASIC and EMP_HRA. and in the transformations i have mapped with 0DOC_CURRCY.
but in the report its showing ERROR only after the amount. plz tell me exactly with what field i need to map???
regards
vadlamudi

No Data displayed in the query

Similar Messages

Maybe you are looking for